Can grout replace concrete in normal structure?

Can grout replace concrete in normal structure?
by

1 Answer

Answer :

The mixture of cement and water alone cannot replace concrete (Longman Scientific and Technical (1987)) because: (i) Shrinkage of grout is several times that of concrete with the same mass. (ii) The effect of creep of grout is far more than that of concrete. (iii) Heat of hydration of cement with water is more than normal concrete and this leads to the problem of severe cracking.
by

Related questions

If a contractor proposes to increase concrete cover beyond contractual specification (i.e. 40mm to 70mm), shall engineers accept the proposal?

Description : If a contractor proposes to increase concrete cover beyond contractual specification (i.e. 40mm to 70mm), shall engineers accept the proposal?

Last Answer : In contractual aspect, based on the requirement of General Specification of Civil Engineering Works (1992 Edition), the tolerance of concrete cover is between + ... larger cover. Therefore, with an increase of concrete cover, the crack width will increase which is undesirable.

In carrying out compression test for concrete, should test cubes or test cylinders be adopted?

Description : In carrying out compression test for concrete, should test cubes or test cylinders be adopted?

Last Answer : Basically, the results of compression test carried out by using cubes are higher than that by cylinders. In compression test, the failure mode is in the form of tensile splitting induced by uniaxial ... are lower than that of cubes. Reference is made to Longman Scientific and Technical (1987).

If concrete compression test fails, should Schmidt hammer test be adopted as an alternative test to prove the concrete strength?

Description : If concrete compression test fails, should Schmidt hammer test be adopted as an alternative test to prove the concrete strength?

Last Answer : The Scmidt hammer test is based on the elastic rebound of hammer which presses on concrete surface and it measures the surface hardness of concrete. Since the test is very sensitive to the ... strength of concrete. Therefore, it may not be considered a good substitute for concrete compression test.

Is it desirable to use concrete of very high strength i.e. exceeding 60MPa? What are the potential problems associated with such high strength concrete?

Description : Is it desirable to use concrete of very high strength i.e. exceeding 60MPa? What are the potential problems associated with such high strength concrete?

Last Answer : To increase the strength of concrete, say from 40MPa to 80MPa, it definitely helps in improving the structural performance of the structure by producing a denser, more durable and higher load ... Moreover, owing to a low aggregate content of high strength concrete, creep and shrinkage increases.

In concrete compression test, normally 150mmx150mmx150mm concrete cube samples is used for testing. Why isn’t 100mmx100mmx100mm concrete cube samples used in the test instead of 150mmx150mmx150mm concrete cube samples?

Description : In concrete compression test, normally 150mmx150mmx150mm concrete cube samples is used for testing. Why isn’t 100mmx100mmx100mm concrete cube samples used in the test instead of 150mmx150mmx150mm concrete cube samples?

Last Answer : Basically, the force supplied by a concrete compression machine is a definite value. For normal concrete strength application, say below 50MPa, the stress produced by a ... cube size of 150mmx150mmx150mm is already sufficient for the crushing strength of the machine.

In designing concrete structures, normally maximum aggregate sizes are adopted with ranges from 10mm to 20mm. Does an increase of maximum aggregate size benefit the structures?

Description : In designing concrete structures, normally maximum aggregate sizes are adopted with ranges from 10mm to 20mm. Does an increase of maximum aggregate size benefit the structures?

Last Answer : To answer this question, let's consider an example of a cube. The surface area to volume ratio of a cube is 6/b where b is the length of the cube. This implies that ... requirement can offset the disadvantages brought about by discontinuities as suggested by Longman Scientific and Technical (1987).

What is the function of rebate in a typical construction joint?

Description : What is the function of rebate in a typical construction joint?

Last Answer : Construction joints are created on sites to facilitate the construction process. However, if improperly constructed, the completed construction joints will leave an uneven scar on the concrete surface and affect ... After the other pour is concreted, it will hide the uneven joint inside the rebate.

In erection of falsework, for a rectangular panel inside a falsework should it be braced along the two diagonals?

Description : In erection of falsework, for a rectangular panel inside a falsework should it be braced along the two diagonals?

Last Answer : When a rectangular panel is subject to an eccentric load or a lateral load, it tends to deform into a parallelogram with one diagonal shortening and the other elongating. Theoretically, it is sufficient to ... may come from both sides of the panel and hence it should be braced in both diagonals.

What is the indication of shear slump and collapse slump in slump tests?

Description : What is the indication of shear slump and collapse slump in slump tests?

Last Answer : There are three types of slump that may occur in slumps test, namely, true slump, shear slump and collapse slump. True slump refers to general drop of the concrete mass ... concrete. Collapse slump indicates that concrete mix is too wet ad the mix is deemed to be harsh and lean.

What are the disadvantages of curing by ponding and polythene sheets?

Description : What are the disadvantages of curing by ponding and polythene sheets?

Last Answer : The purpose of curing is to reduce the rate of heat loss of freshly placed concrete to the atmosphere and to minimize the temperature gradient across concrete cross ... would be affected. Moreover, for water lost due to self­desiccation, this method cannot replenish these losses.

What are the major problems in using pumping for concreting works?

Description : What are the major problems in using pumping for concreting works?

Last Answer : In pumping operation, the force exerted by pumps must overcome the friction between concrete and the pumping pipes, the weight of concrete and the pressure head when placing concrete above the ... other hand, a proper selection of aggregate grading helps to improve the pumpability of concrete.

What is the function of shear keys in the design of retaining walls?

Description : What is the function of shear keys in the design of retaining walls?

Last Answer : In determining the external stability of retaining walls, failure modes like bearing failure, sliding and overturning are normally considered in design. In considering the criterion of sliding, the sliding ... instead of 0.8φ in the previous case and the sliding resistance can be enhanced.

If on­site slump test fails, should engineers allow the contractor to continue the concreting works?

Description : If on­site slump test fails, should engineers allow the contractor to continue the concreting works?

Last Answer : This is a very classical question raised by many graduate engineers. In fact, there are two schools of thought regarding this issue. The first school of thought is rather straightforward: the contractor ... t the Engineer exercise his power to stop the contractor and save these extra time and cost?

What are the functions of different components of a typical expansion joint?

Description : What are the functions of different components of a typical expansion joint?

Last Answer : In a typical expansion joint, it normally contains the following components: joint sealant, joint filler, dowel bar, PVC dowel sleeve, bond breaker tape and cradle bent. Joint sealant: it seals the ... the joint . Cradle bar: It helps to uphold the dowel bar in position during construction.

(1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco and most non-specialty grout. It usually originates from limestone. It is a fine powder produced by grinding Portland cement. clinker (more than 90%), a limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Description : (1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco ... limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

Allowable crack width for reinforce concrete structure under normal conditions is [ A ] 0 [ B ] 0.1 mm [ C ] 0.2 mm [ D ] 0.3 mm

Description : Allowable crack width for reinforce concrete structure under normal conditions is [ A ] 0 [ B ] 0.1 mm [ C ] 0.2 mm [ D ] 0.3 mm

Last Answer : [ D ] 0.3 mm

What are the functions of grout inside tendon ducts?

Description : What are the functions of grout inside tendon ducts?

Last Answer : Grout in prestressing works serves the following purposes: (i) Protect the tendon against corrosion. (ii) Improve the ultimate capacity of tendon. (iii) Provide a bond between the structural member and the tendon. (iv) In case of failure, the anchorage is not subject to all strain energy.

The measurement is made in square metre in case of (A) Cement concrete in foundation (B) R.C.C. structure (C) Hollow concrete block wall (D) None of these

Description : The measurement is made in square metre in case of (A) Cement concrete in foundation (B) R.C.C. structure (C) Hollow concrete block wall (D) None of these

Last Answer : (D) None of these

Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Description : Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Last Answer : (D) All the above

Proper proportioning of concrete, ensures (A) Desired strength and workability (B) Desired durability (C) Water tightness of the structure (D) All the above

Description : Proper proportioning of concrete, ensures (A) Desired strength and workability (B) Desired durability (C) Water tightness of the structure (D) All the above

Last Answer : Option D

Higher workability of concrete is required if the structure is (A) Made with cement concrete (B) Thick and reinforced (C) Thin and heavily reinforced (D) Thick and heavily reinforced

Description : Higher workability of concrete is required if the structure is (A) Made with cement concrete (B) Thick and reinforced (C) Thin and heavily reinforced (D) Thick and heavily reinforced

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is called a concrete pile (C) In pile which transfers the load to the soil by the friction between the pile and the surrounding soil is called friction pile (D) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Description : Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is ... ) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Last Answer : Answer: Option D

A concrete structure is set on fire and the temperature raises to 1000°C. The strength of concrete as compared to original strength reduces to (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Description : A concrete structure is set on fire and the temperature raises to 1000°C. The strength of concrete as compared to original strength reduces to (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Last Answer : Answer: Option C

In the reinforced cement concrete structure, the steel reinforcement consists of . (a) Deformed bars (b) Cold twisted bars (c) Mildsteel and medium tensile steel bars (d) All of these

Description : In the reinforced cement concrete structure, the steel reinforcement consists of . (a) Deformed bars (b) Cold twisted bars (c) Mildsteel and medium tensile steel bars (d) All of these

Last Answer : (d) All of these

The process of keeping the concrete structure moist is called [ A ] Hydration [ B ] Curing [ C ] Creep [ D ] Shrinkage

Description : The process of keeping the concrete structure moist is called [ A ] Hydration [ B ] Curing [ C ] Creep [ D ] Shrinkage

Last Answer : [ B ] Curing

Select the incorrect statement [ A ] R.C.C has better fire resistance than steel [ B ] R.C.C. structure is economical than steel structure [ C ] Strength of concrete decreases as age increases [ D ] R.C.C can be used for under water and marine structures

Description : Select the incorrect statement [ A ] R.C.C has better fire resistance than steel [ B ] R.C.C. structure is economical than steel structure [ C ] Strength of concrete decreases as age increases [ D ] R.C.C can be used for under water and marine structures

Last Answer : [ C ] Strength of concrete decreases as age increases

American jellies, what is the best brand of cleaner to remove mold and its stains from the grout in a shower/tub?

Description : American jellies, what is the best brand of cleaner to remove mold and its stains from the grout in a shower/tub?

Last Answer : Bleach. That’s what I use. I believe vinegar and ammonia also works.

Which product works the best for cleaning tile grout?

Description : Which product works the best for cleaning tile grout?

Last Answer : I use the clorox bleach pen. It’s the easiest thing I’ve found that really gets in there.

How to clean white grout in terrazzo?

Description : How to clean white grout in terrazzo?

Last Answer : They sell grout cleaner at Home Depot. Use that stuff and a lot of elbow grease. Then you will need to purchase whats called grout sealer. You put that on the grout. Two coats should do it and after that its easier to clean in the future.

Is there anything that you would recommend using to get stains out of tile grout?

Description : Is there anything that you would recommend using to get stains out of tile grout?

Last Answer : Borax will get stains out of anything. Make it into a paste and rub it in leave for a few seconds/minutes dependings the stain , then wipe off .

Is there any way to remove excess grout and save my mosaic tiles?

Description : Is there any way to remove excess grout and save my mosaic tiles?

Last Answer : elbow grease is the safest way. I have had to clean grout off before, and it sucks. I would maybe google it.

How do you clean grout before sealing?

Description : How do you clean grout before sealing?

Last Answer : Before applying a sealer, be sure to clean your grout thoroughly and repair any cracks or crumbles in the grout lines. otherwise, you will seal in dirt and damaged seams

What is the difference between tile cleaning & grout cleaning?

Description : What is the difference between tile cleaning & grout cleaning?

Last Answer : Need Answer

What is the best way to clean grout?

Description : What is the best way to clean grout?

Last Answer : Steps on how to clean grout in a best way. Use plain warm water and bristle brush. Spray an equal parts of vinegar and warm water Apply baking soda and spray vinegar Pour some hydrogen peroxide For up to 15 minutes apply oxygen bleach Try a commercial grout cleaner

What are the benefits of sealing grout?

Description : What are the benefits of sealing grout?

Last Answer : 3 main benefits of Grout sealing. Keeps grout looking brand new. Helps keep out mold and mildew. It is not hard or expensive to do.

What is the best way to get stains out of tile grout?

Description : What is the best way to get stains out of tile grout?

Last Answer : According to several sources on the internet, what they are suggesting is to use Oxygen bleach.

What colors does grout come in?

Description : What colors does grout come in?

Last Answer : Depending on where you purchase the grout, you can actually have the grout colored to any color of your choice. Like paint, you can take in a color swatch and get the grout dyed to match the decor.

What type of grout is best for bathroom showers?

Description : What type of grout is best for bathroom showers?

Last Answer : You can use two different types of grout for bathroom showers. If your tile requires a thin line of grout then it would be best to use a non-sanding type and for tile that requires a wider line of grout its best to use a sanding type.

Does tile grout come in other colors besides white?

Description : Does tile grout come in other colors besides white?

Last Answer : Tile grout actually comes in dozens of colors, most of which are earth tones and pastels.

where can I purchase oxygen bleach for cleaning grout in the clearwater/largo are?

Description : where can I purchase oxygen bleach for cleaning grout in the clearwater/largo are?

Last Answer : Use regular bleach (like Chlorox or a store brand) for cleaning grout. Dilute it 50/50 with water and put it in a spray bottle. Make sure the room is well ventilated before you start spraying ... why they are safe for colored fabrics. Regular household bleach will kill mildew that's grown on grout.

Where can I find tile grout cleaning?

Description : Where can I find tile grout cleaning?

Last Answer : Diy professional Dry Cleaner is one of the best tile grout cleaning company which will give you the perfect price with the good quality. Beside that you could find more company which will help you to clean your bathroom properly.

What exactly is tile grout cleaning?

Description : What exactly is tile grout cleaning?

Last Answer : Your local yellow pages can offer professionals who will come do the work for you. Tile ground cleaning is when they clean your tile (bathroom, kitchen, flooring) grout back to its original color.

Grout Sealer?

Description : Grout Sealer?

Last Answer : form_title= Grout Sealer form_header= Keep your home free from mold and bacteria. How much grout do you need?*= _ [50] What color is the grout?*= _ [50] When do you need the grout sealed?*= _ [50]

How do you avoid grout in your food?

Description : How do you avoid grout in your food?

Last Answer : To avoid grout in your food place the dish higher up in your oven. This will cause the food to cook a little slower and will help you to avoid geout in your food.

Tile Grout?

Description : Tile Grout?

Last Answer : form_title= Tile Grout form_header= Give your home a face lift with new tile grout! Do you want to install new grout?*= () Yes () No () Not Sure Do you want to clean out old grout?*= () Yes () No () Not Sure What color do you want the grout?*= _ [50] How old is the grout in your home? *= _ [50]

tile and grout cleaning?

Description : tile and grout cleaning?

Last Answer : form_title=tile and grout cleaning form_header=11813 Describe the kind of service you are looking for.*= () Clean / Seal grout or tile () Stone or marble polishing () Replace or repair grout Give the ... ] Countertops [] Backsplash [] Tub / shower or surrounding area [] Walls [] Floors [] Outdoors

Grout Cleaning?

Description : Grout Cleaning?

Last Answer : form_title=Grout Cleaning form_header=11823 Describe the kind of service you are looking for.*= () Clean / Seal grout or tile () Stone or marble polishing () Replace or repair grout Give the type of ... ] Countertops [] Backsplash [] Tub / shower or surrounding area [] Walls [] Floors [] Outdoors

What is the best way to clean the tile and grout in my bathroom?

Description : What is the best way to clean the tile and grout in my bathroom?

Last Answer : Cleaning tiles is difficult with the wrong supplies but if you have the right cleaner at your disposal then it is a piece of cake. Generic household cleaners such as Mr. Clean, Lysol, or powder-based cleaners can work on tile grout. Make sure to rinse the grout well after cleaning.

Which cleaning product works best to completely restore my tile and grout?

Description : Which cleaning product works best to completely restore my tile and grout?

Last Answer : If you are looking for more information on Which cleaning product works best to completely restore my tile and grout, the best place to look for the information is on www.baneclene.com/stonetech.html

Cleaning Grout With Household Items?

Description : Cleaning Grout With Household Items?

Last Answer : Toothpaste makes a great cleaner for scrubbing grout. Apply a little non-gel toothpaste and let sit for a few minutes. Scrub with an old toothbrush. A baking soda and water paste will also clean ... with white vinegar. The acid in the mixture will break down stains so they can be scrubbed away.