Alkyd resin is a/an (A) Polyamide (B) Polyester (C) Polyolefin (D) Addition polymer

Alkyd resin is a/an
(A) Polyamide
(B) Polyester
(C) Polyolefin
(D) Addition polymer
by

1 Answer

Answer :

(B) Polyester
by

Related questions

Acrilan fibres used for making cloth, carpet & blankets, which is a hard, horny & high melting polymeric material is nothing but (A) Polyacrylonitrile (B) Polyamide (C) Saturated polyester (D) Alkyd resin

Description : Acrilan fibres used for making cloth, carpet & blankets, which is a hard, horny & high melting polymeric material is nothing but (A) Polyacrylonitrile (B) Polyamide (C) Saturated polyester (D) Alkyd resin

Last Answer : (A) Polyacrylonitrile

Which of the following best describes Nylon? w) polyamide x) polyester y) polyolefin z) acrylic

Description : Which of the following best describes Nylon? w) polyamide x) polyester y) polyolefin z) acrylic

Last Answer : ANSWER: W -- POLYAMIDE

Dacron is a: w) polyamide x) polyester y) polyether z) polyolefin

Description : Dacron is a: w) polyamide x) polyester y) polyether z) polyolefin

Last Answer : ANSWER: X -- POLYESTER

Polycondensation of saturated dicarboxylic acid with polyhydric alcohol produces (A) Epoxy resin (B) Polyamide (C) Alkyd resin (D) Phenolic resin

Description : Polycondensation of saturated dicarboxylic acid with polyhydric alcohol produces (A) Epoxy resin (B) Polyamide (C) Alkyd resin (D) Phenolic resin

Last Answer : (C) Alkyd resin

Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Description : Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Last Answer : (A) Polyamide

Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Description : Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Last Answer : (A) Polyamide

Glyptal used in the manufacture of paints & lacquers is a __________ polymer. (A) Polyamide (B) Polystyrene (C) Polyester (D) Polyacrylonitril

Description : Glyptal used in the manufacture of paints & lacquers is a __________ polymer. (A) Polyamide (B) Polystyrene (C) Polyester (D) Polyacrylonitril

Last Answer : (C) Polyester

Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polymer

Description : Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polymer

Last Answer : (A) Polyester

Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Description : Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Nylon threads are made of - (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Description : Nylon threads are made of - (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Last Answer : (2) Polyamide polymer Explanation: Nylon is a generic designation for a family of synthetic polymers, more specifically aliphatic or semiaromatic polyamides. They can be melt-processed into fibers, ... . Nylon polymers have found significant commercial applications in fibers, in shapes and in films.

Nylon threads are made of (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Description : Nylon threads are made of (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Last Answer : Polyamide polymer

__________ are produced by reacting polybasic acid (e.g. Phthalic anhydride) with polyhydric alcohol (e.g., glycerol). (A) Unsaturated polyester (B) Alkyd resins (C) Saturated polyester (D) Amino resins

Description : __________ are produced by reacting polybasic acid (e.g. Phthalic anhydride) with polyhydric alcohol (e.g., glycerol). (A) Unsaturated polyester (B) Alkyd resins (C) Saturated polyester (D) Amino resins

Last Answer : (B) Alkyd resins

Dacron is a/an (A) Addition polymer (B) Condensation polymer (C) Polyester (D) Both (B) and (C)

Description : Dacron is a/an (A) Addition polymer (B) Condensation polymer (C) Polyester (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Which of the following polymers shows the highest anti-tacking properties? (A) Melamine formaldehyde resin (B) Phenolic resin (C) Epoxy resin (D) Alkyd resin

Description : Which of the following polymers shows the highest anti-tacking properties? (A) Melamine formaldehyde resin (B) Phenolic resin (C) Epoxy resin (D) Alkyd resin

Last Answer : (A) Melamine formaldehyde resin

Alkyd resin cannot be used for making (A) Plasticiser (B) Paint & varnish (C) Fibres (D) Film forming materials

Description : Alkyd resin cannot be used for making (A) Plasticiser (B) Paint & varnish (C) Fibres (D) Film forming materials

Last Answer : (C) Fibres

Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Description : Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Last Answer : (B) For fibre making

Rayon is a __________ fibre. (A) Cellulosic (B) Polyamide (C) Polyester (D) Natural

Description : Rayon is a __________ fibre. (A) Cellulosic (B) Polyamide (C) Polyester (D) Natural

Last Answer : (A) Cellulosic

Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polyme

Description : Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polyme

Last Answer : (A) Polyeste

Nylon-6, 10 which is used for bristles making is superior to nylon 6, 6 due to its lower water absorption capacity, is a/an (A) Polyester (B) Polyamide (C) Polyisopren

Description : Nylon-6, 10 which is used for bristles making is superior to nylon 6, 6 due to its lower water absorption capacity, is a/an (A) Polyester (B) Polyamide (C) Polyisopren

Last Answer : (B) Polyamide

Acrylic is the name of (A) Cellulose resin (B) Alkyd resin (C) Methyl methacrylate (D) Cumarone-indene

Description : Acrylic is the name of (A) Cellulose resin (B) Alkyd resin (C) Methyl methacrylate (D) Cumarone-indene

Last Answer : Answer: Option C

Structurally silk is (a) a polyamide (b) a polyester (c) an enzyme (d) a nucleic acid

Description : Structurally silk is (a) a polyamide (b) a polyester (c) an enzyme (d) a nucleic acid

Last Answer : Ans:(a)

Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene

Description : Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene

Last Answer : (1) Polyamide Explanation: Nylon is a generic designation for a family of synthetic polymers known generically as aliphatic polyamides. It is one of the most commonly used polymers.

Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene

Description : Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene

Last Answer : Polyamide

Epoxy resin is (A) Not used for surface coating (B) A good abrasive (C) An elastomer (D) A polyester

Description : Epoxy resin is (A) Not used for surface coating (B) A good abrasive (C) An elastomer (D) A polyester

Last Answer : (B) A good abrasive

The most commonly used resin for making reinforced plastic is (A) Unsaturated polyester (B) Polypropylene

Description : The most commonly used resin for making reinforced plastic is (A) Unsaturated polyester (B) Polypropylene

Last Answer : (A) Unsaturated polyester

Epoxy resin (A) Is a good adhesive (B) Is an elastomer (C) Cannot be used for surface coatings (D) Is a polyester

Description : Epoxy resin (A) Is a good adhesive (B) Is an elastomer (C) Cannot be used for surface coatings (D) Is a polyester

Last Answer : (A) Is a good adhesive

Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Description : In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Last Answer : (A) Bakelite (phenol formaldehyde)

Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Description : Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Last Answer : (B) Nylon-66

Which of the following is not a polyolefin? (A) Polystyrene (B) Polypropylene (C) Neoprene (D) None of these

Description : Which of the following is not a polyolefin? (A) Polystyrene (B) Polypropylene (C) Neoprene (D) None of these

Last Answer : (C) Neoprene

Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation(A) PVC(B) Bakelite(C) PTFE(D) Epoxy resin

Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin

Last Answer : (A) PVC

__________ resins are produced by the condensation polymerisation of formaldehyde with urea or melamine. (A) Epoxy (B) Amino (C) Alkyd (D) Phenolic

Description : __________ resins are produced by the condensation polymerisation of formaldehyde with urea or melamine. (A) Epoxy (B) Amino (C) Alkyd (D) Phenolic

Last Answer : (B) Amino

Terylene is a/an (A) Addition polymer (B) Poly amide (C) Homopolymer (D) None of these

Description : Terylene is a/an (A) Addition polymer (B) Poly amide (C) Homopolymer (D) None of these

Last Answer : (D) None of these

__________ is an addition polymer (A) Nylon (B) Bakelite (C) Polythene (D) None of these

Description : __________ is an addition polymer (A) Nylon (B) Bakelite (C) Polythene (D) None of these

Last Answer : (C) Polythene

Bakelite is a/an (A) Addition polymer (B) Elastomer (C) Thermoplastic (D) None of these

Description : Bakelite is a/an (A) Addition polymer (B) Elastomer (C) Thermoplastic (D) None of these

Last Answer : (D) None of these

__________ polymer is used for making unbreakable crockery. (A) Thermoplastic (B) Melamine (C) Addition (D) None of these

Description : __________ polymer is used for making unbreakable crockery. (A) Thermoplastic (B) Melamine (C) Addition (D) None of these

Last Answer : (B) Melamine

what paint to use for painting vinyl siding,alkyd or latex?

Description : what paint to use for painting vinyl siding,alkyd or latex?

Last Answer : The paint that seems to work best with vinyl siding are ones that have a blend of urethane and acrylic resins. The most important thing to do when painting siding make sure your surface is clean and dry.

Which of the following is not an example of addition polymer?

Description : Which of the following is not an example of addition polymer?

Last Answer : Which of the following is not an example of addition polymer? A. Polystyrene B. Polyethylene C. Polypropylene D. Dacron

Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Description : Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Last Answer : Ans: Nylon 6 —Condensation polymer  Neoprene and PVC— Addition polymer.

Differntiate between addition polymer and condensation polymer.

Description : Differntiate between addition polymer and condensation polymer. 

Last Answer : Addition Polymer  Condensation Polymer 1. Large no. of unsaturated monomers combine together to form polymers Eg. Polythene and ... group with release of small molecule like water combine to form polymers. Eg. Nylon and Teflon

Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Last Answer : (A) Hexamethylene diamine and adipic acid

Which of the following is generally not drawn into fibre? (A) Polyamide (B) Unsaturated polyesters (C) Saturated polyesters (D) Polyacrylonitrile

Description : Which of the following is generally not drawn into fibre? (A) Polyamide (B) Unsaturated polyesters (C) Saturated polyesters (D) Polyacrylonitrile

Last Answer : (B) Unsaturated polyesters

The generic chemical name for the class of polymers which are commercially known as nylons is (A) Polyolefins (B) Polyamide (C) Polyacrylate (D) Polyurethane

Description : The generic chemical name for the class of polymers which are commercially known as nylons is (A) Polyolefins (B) Polyamide (C) Polyacrylate (D) Polyurethane

Last Answer : (B) Polyamide

Thiokol is nothing but (A) Polysulphide rubber (B) Polyamide fibre (C) Engineering plastic (D) Expanded polystyrene

Description : Thiokol is nothing but (A) Polysulphide rubber (B) Polyamide fibre (C) Engineering plastic (D) Expanded polystyrene

Last Answer : (A) Polysulphide rubber

Which of the following is a natural polyamide fibre? (A) Wool (B) Silk (C) Cotton

Description : Which of the following is a natural polyamide fibre? (A) Wool (B) Silk (C) Cotton

Last Answer : (A) Wool

Which of the following is a polyamide?

Description : Which of the following is a polyamide?

Last Answer : Which of the following is a polyamide? A. Nylon B. Orlon C. Teflon D. Terylene

Which of the following is not a polyamide?

Description : Which of the following is not a polyamide?

Last Answer : Which of the following is not a polyamide? A. Leather B. Natural rubber C. Wool D. Nylon-66

Which one among the following polymers is used for making bullet-proof material? (1) Polyvinyl chloride (2) Polystyrene (3) Polyethylene (4) Polyamide

Description : Which one among the following polymers is used for making bullet-proof material? (1) Polyvinyl chloride (2) Polystyrene (3) Polyethylene (4) Polyamide

Last Answer : (3) Polyethylene Explanation: A bullet-proof material is made of polyethylene. It is a higher grade of the plastic found in Tupperware.

Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester

Description : Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester

Last Answer : (B) Polyacrylonitrile

Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Description : Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Last Answer : (D) Either (B) or (C)