Epoxy resin is (A) Not used for surface coating (B) A good abrasive (C) An elastomer (D) A polyester

Epoxy resin is
(A) Not used for surface coating
(B) A good abrasive
(C) An elastomer
(D) A polyester
by

1 Answer

Answer :

(B) A good abrasive
by

Related questions

Epoxy resin (A) Is a good adhesive (B) Is an elastomer (C) Cannot be used for surface coatings (D) Is a polyester

Description : Epoxy resin (A) Is a good adhesive (B) Is an elastomer (C) Cannot be used for surface coatings (D) Is a polyester

Last Answer : (A) Is a good adhesive

Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Description : Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

What do you think about my using epoxy resin coating and flooring in all areas of my home and office, and why?

Description : What do you think about my using epoxy resin coating and flooring in all areas of my home and office, and why?

Last Answer : If the epoxy resin coating works well and safely, it should be fine. As long as the walls won't fall apart or aren't 'peeling' away. But check out the ingredients/chemical fumes of the epoxy that might affect your health. Open the windows at all times.

Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Description : Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Last Answer : (B) For fibre making

Kaolin is a/an (A) Refractory material (B) Synthetic resin (C) Artificial abrasive (D) Blue pigment

Description : Kaolin is a/an (A) Refractory material (B) Synthetic resin (C) Artificial abrasive (D) Blue pigment

Last Answer : (A) Refractory material

Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Description : Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Last Answer : (B) Nylon-66

Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation(A) PVC(B) Bakelite(C) PTFE(D) Epoxy resin

Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin

Last Answer : (A) PVC

Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Description : Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Last Answer : (B) Nylon-66

Which of the following polymers shows the highest anti-tacking properties? (A) Melamine formaldehyde resin (B) Phenolic resin (C) Epoxy resin (D) Alkyd resin

Description : Which of the following polymers shows the highest anti-tacking properties? (A) Melamine formaldehyde resin (B) Phenolic resin (C) Epoxy resin (D) Alkyd resin

Last Answer : (A) Melamine formaldehyde resin

__________ scrap can be recycled & reutilised. (A) Bakelite (B) Epoxy resin (C) Polythene (D) None of these

Description : __________ scrap can be recycled & reutilised. (A) Bakelite (B) Epoxy resin (C) Polythene (D) None of these

Last Answer : (C) Polythene

Polycondensation of saturated dicarboxylic acid with polyhydric alcohol produces (A) Epoxy resin (B) Polyamide (C) Alkyd resin (D) Phenolic resin

Description : Polycondensation of saturated dicarboxylic acid with polyhydric alcohol produces (A) Epoxy resin (B) Polyamide (C) Alkyd resin (D) Phenolic resin

Last Answer : (C) Alkyd resin

Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E. (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone rubber (C) Teflon (D) Epoxy resin

Description : Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E. (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone rubber (C) Teflon (D) Epoxy resin

Last Answer : (C) Teflon

Cation exchange resins used in water treatment is made from __________ resin. (A) Urea formaldehyde (B) Epoxy (C) Amino (D) Phenolic

Description : Cation exchange resins used in water treatment is made from __________ resin. (A) Urea formaldehyde (B) Epoxy (C) Amino (D) Phenolic

Last Answer : (A) Urea formaldehyde

__________ practically possess no elasticity. (A) Vulcanite or ebonite(B) Spandex fibre(C) Polysulphide rubber(D) Epoxy resin

Description : __________ practically possess no elasticity. (A) Vulcanite or ebonite (B) Spandex fibre (C) Polysulphide rubber (D) Epoxy resin

Last Answer : (A) Vulcanite or ebonite

Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone (C) Teflon (D) Epoxy resin

Description : Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone (C) Teflon (D) Epoxy resin

Last Answer : (C) Teflon

Acrilan fibres used for making cloth, carpet & blankets, which is a hard, horny & high melting polymeric material is nothing but (A) Polyacrylonitrile (B) Polyamide (C) Saturated polyester (D) Alkyd resin

Description : Acrilan fibres used for making cloth, carpet & blankets, which is a hard, horny & high melting polymeric material is nothing but (A) Polyacrylonitrile (B) Polyamide (C) Saturated polyester (D) Alkyd resin

Last Answer : (A) Polyacrylonitrile

Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Description : Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Last Answer : (A) Polyamide

Alkyd resin is a/an (A) Polyamide (B) Polyester (C) Polyolefin (D) Addition polymer

Description : Alkyd resin is a/an (A) Polyamide (B) Polyester (C) Polyolefin (D) Addition polymer

Last Answer : (B) Polyester

The most commonly used resin for making reinforced plastic is (A) Unsaturated polyester (B) Polypropylene

Description : The most commonly used resin for making reinforced plastic is (A) Unsaturated polyester (B) Polypropylene

Last Answer : (A) Unsaturated polyester

Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Description : Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Last Answer : (A) Polyamide

Is it possible to treat a stretchered canvas with polyurethane, epoxy resin or some such, to make it waterproof enough to hang over the bathroom shower?

Description : Is it possible to treat a stretchered canvas with polyurethane, epoxy resin or some such, to make it waterproof enough to hang over the bathroom shower?

Last Answer : answer:If you put on enough coats to be certain that there weren't any untreated areas, no matter how small, I don't see why not. Isn't this what they do with fiberglass coatings to make ... to boating people and ask them what they would recommend. Is this an Acrylic painting you're talking about?

Are epoxy resin countertops scratch proof?

Description : Are epoxy resin countertops scratch proof?

Last Answer : Epoxy resin can be used as a sealant on counter tops to help make them resistant to scratches. There are no countertops made of epoxy resin

What are the advantages of epoxy resin as a fixative?

Description : What are the advantages of epoxy resin as a fixative?

Last Answer : Expoxy resin is very stable and that is exactly what you need in a goo fixative. The last thing you need is an unstable mix of chemicals,that can end in disaster. The advantages of epoxy ... it is durable, long-lasting, and inexpensive. Epoxy resin also resists cracking, unlike many older adhesives.

Write the properties and applications of epoxy resin.

Description : Write the properties and applications of epoxy resin.

Last Answer : Properties: i) They have good chemical resistance. ii) They have low shrinkage during curing. iii) They possess good electrical resistance. iv) These compounds can be used in solid and ... to their electrical resistance they are widely used in making insulators, bushings etc. for high voltage. 

Epoxy resin transformers are more suitable in hazardous areas. Give reason.

Description : Epoxy resin transformers are more suitable in hazardous areas. Give reason.

Last Answer : Reason for Epoxy resin transformers are more suitable in hazardous areas :   1. Core used is of CRGO M4-M3 circular size, minimizes leakage reactance and hence core losses will be less. 2. Winding ... of oil there is no need of testing the dielectric strength of oil or no filtration of oil.

Aryl benzene sulphonate (ABS) is a (A) Detergent (B) Plasticiser for unsaturated polyester (C) Starting material for the synthesis of glycerine (D) Coating ingredient for photographic film

Description : Aryl benzene sulphonate (ABS) is a (A) Detergent (B) Plasticiser for unsaturated polyester (C) Starting material for the synthesis of glycerine (D) Coating ingredient for photographic film

Last Answer : (A) Detergent

My garage is already painted. Do I need to remove paint before adding the quikrete Epoxy Garage floor coating?

Description : My garage is already painted. Do I need to remove paint before adding the quikrete Epoxy Garage floor coating?

Last Answer : It is best if you do remove the old paint first.

Will epoxy floor coating protect from scratches?

Description : Will epoxy floor coating protect from scratches?

Last Answer : Your best bet is to use moving pads when you move furniture. These pads come in a variety of sizes and shapes; they have a smooth plastic side that will not scratch your floors and a ... of the furniture leg. They also make sliding heavy furniture across a floor easy because they reduce friction.

Moisture damage, as a result of condensation occurring inside of the cargo winch master switches, can be reduced by __________________. A. installing a light bulb in the pedestal stand B. coating the switch box internals with epoxy sealer C. venting the switch box regularly D. using strip heaters inside the switch box

Description : Moisture damage, as a result of condensation occurring inside of the cargo winch master switches, can be reduced by __________________. A. installing a light bulb in the pedestal stand B. coating the ... epoxy sealer C. venting the switch box regularly D. using strip heaters inside the switch box

Last Answer : Answer: D

The property of the bearing material to allow the dust and abrasive particles to get absorbed on the surface of the lining is called (A) Embeddability (B) Conformability (C) Viscosity (D) Endurance limit stress

Description : The property of the bearing material to allow the dust and abrasive particles to get absorbed on the surface of the lining is called (A) Embeddability (B) Conformability (C) Viscosity (D) Endurance limit stress

Last Answer : (A) Embeddability

Which of the following is not an elastomer? (A) Polyisoprene (B) Neoprene (C) Nitrile-butadiene (D) None of these

Description : Which of the following is not an elastomer? (A) Polyisoprene (B) Neoprene (C) Nitrile-butadiene (D) None of these

Last Answer : (D) None of these

Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Last Answer : (B) Magnitude of intermolecular forces

Which of the following is an elastomer? (A) Thiokol (B) Phenol formaldehyde (C) Urea formaldehyde (D) Polystyrene

Description : Which of the following is an elastomer? (A) Thiokol (B) Phenol formaldehyde (C) Urea formaldehyde (D) Polystyrene

Last Answer : (A) Thiokol

Bakelite is a/an (A) Addition polymer (B) Elastomer (C) Thermoplastic (D) None of these

Description : Bakelite is a/an (A) Addition polymer (B) Elastomer (C) Thermoplastic (D) None of these

Last Answer : (D) None of these

Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Description : Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Last Answer : (B) Engineering plastic

Perspex is nothing but (A) Acrylic sheet (B) An elastomer (C) An alloy of lead and tin (D) Aluminium foil clad with Bakelite

Description : Perspex is nothing but (A) Acrylic sheet (B) An elastomer (C) An alloy of lead and tin (D) Aluminium foil clad with Bakelite

Last Answer : (A) Acrylic sheet

Which one of the following is not an elastomer? (A) Polyisoprene (B) Neoprene (C) Nitrile-butadiene (D) None of these

Description : Which one of the following is not an elastomer? (A) Polyisoprene (B) Neoprene (C) Nitrile-butadiene (D) None of these

Last Answer : (D) None of these

polymer is termed as an 'elastomer', if its percentage elongation is more than 100%. An elastomer is termed as 'rubber' if its percentage elongation is more than __________ percent. (A) 150 (B) 200 (C) 300 (D) 400

Description : polymer is termed as an 'elastomer', if its percentage elongation is more than 100%. An elastomer is termed as 'rubber' if its percentage elongation is more than __________ percent. (A) 150 (B) 200 (C) 300 (D) 400

Last Answer : Option B

What is an elastomer?

Description : What is an elastomer?

Last Answer : What is an elastomer?

An elastomer is a polymer when its percentage elongation rate is ?

Description : An elastomer is a polymer when its percentage elongation rate is ?

Last Answer : Greater than 100%.

An impression with elastomer in custom tray has been taken for crown preparation; it will be two days before the impression gets to the laboratory for construction of the crown. Which impression material is preferred? A. Polyether B. Thiokol or meraptan rubber C. Condensation silicone D. Vinyl polysiloxane

Description : An impression with elastomer in custom tray has been taken for crown preparation; it will be two days before the impression gets to the laboratory for construction of the crown. Which impression ... A. Polyether B. Thiokol or meraptan rubber C. Condensation silicone D. Vinyl polysiloxane

Last Answer : D. Vinyl polysiloxane

38. Which of the following statements is false? (1) Both starch and cellulose are polymers of glucose (2) Artificial silk is derived from cellulose (3) Nylon-66 is an example of elastomer (4) The repeat unit in natural rubber is isoprene

Description : 38. Which of the following statements is false? (1) Both starch and cellulose are polymers of glucose (2) Artificial silk is derived from cellulose (3) Nylon-66 is an example of elastomer (4) The repeat unit in natural rubber is isoprene

Last Answer : Nylon-66 is an example of elastomer

Where is thermoplastic elastomer used?

Description : Where is thermoplastic elastomer used?

Last Answer : Thermoplastic elastomers (thermoplastic elastomers, TPE) are widely used due to their unique properties in comparison with other plastics. They are soft, resilient and recoverable. An alternative was needed ... dried before processing. It is necessary that the moisture content does not exceed 0.1%.

Sherardizing process is used for (A) Surface coating (B) Heat treatment of high speed steel (C) Cold working on metals (D) None of these

Description : Sherardizing process is used for (A) Surface coating (B) Heat treatment of high speed steel (C) Cold working on metals (D) None of these

Last Answer : (A) Surface coating

__________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Description : __________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Last Answer : (D) Calorising

Pick out the correct statement about the condensation. (A) Filmwise condensation gives a lower heat transfer rate than the dropwise condensation (B) Suitable coating or vapour additive is used to promote film wise condensation (C) If a condensing liquid does not wet the surface dropwise, even then condensation will take place on it (D) Reynolds number of condensing liquid is based on its mass flow rate

Description : Pick out the correct statement about the condensation. (A) Filmwise condensation gives a lower heat transfer rate than the dropwise condensation (B) Suitable coating or vapour additive is used to promote film ... place on it (D) Reynolds number of condensing liquid is based on its mass flow rate

Last Answer : (B) Suitable coating or vapour additive is used to promote film wise condensation

Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt

Description : Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt

Last Answer : (A) Apron

__________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Description : __________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Last Answer : (B) Belt

Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor

Description : Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor

Last Answer : (C) Flight conveyor

Screw conveyors are (A) Run at very high rpm (B) Suitable for sticky materials (C) Suitable for highly abrasive materials (D) All (A), (B) and (C)

Description : Screw conveyors are (A) Run at very high rpm (B) Suitable for sticky materials (C) Suitable for highly abrasive materials (D) All (A), (B) and (C)

Last Answer : (B) Suitable for sticky materials