Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester

Most of the fibre forming polymers are crystalline in nature, one of the
exceptions being __________ which is amorphous in nature.
(A) Nylon
(B) Polyacrylonitrile
(C) Polypropylene
(D) Polyester
by

1 Answer

Answer :

(B) Polyacrylonitrile
by

Related questions

__________ is not a polyester fibre. (A) Terylene (B) Dacron (C) Nylon (D) Polyacrylonitrile

Description : __________ is not a polyester fibre. (A) Terylene (B) Dacron (C) Nylon (D) Polyacrylonitrile

Last Answer : (C) Nylon

Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Description : While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Last Answer : A) Low impact strength

Orlan fibre which is used as a wool substitute is (A) An amorphous polymer (B) A natural polymeric fibre (C) Polyacrylonitrile (D) Poly-methyl-methacrylate (PMMA)

Description : Orlan fibre which is used as a wool substitute is (A) An amorphous polymer (B) A natural polymeric fibre (C) Polyacrylonitrile (D) Poly-methyl-methacrylate (PMMA)

Last Answer : (C) Polyacrylonitrile

. The physical state in which polymers exist is (A) Melts & rubber like state (B) Amorphous glassy state (C) Partially crystalline state (D) All (A), (B) and (C)

Description : . The physical state in which polymers exist is (A) Melts & rubber like state (B) Amorphous glassy state (C) Partially crystalline state (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene

Description : Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene

Last Answer : (1) Polyamide Explanation: Nylon is a generic designation for a family of synthetic polymers known generically as aliphatic polyamides. It is one of the most commonly used polymers.

Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene

Description : Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene

Last Answer : Polyamide

Which of the following are condensation polymers? I. Polypropylene II. Teflon III. Nylon (a) Only I (b) Only II (c) Only III (d) Both II and III

Description : Which of the following are condensation polymers? I. Polypropylene II. Teflon III. Nylon (a) Only I (b) Only II (c) Only III (d) Both II and III

Last Answer : Only III

Which of the following are addition polymers? I. Polypropylene II. Teflon III. Nylon (a) Only I (b) Only II (c) Only III (d) both I and II

Description : Which of the following are addition polymers? I. Polypropylene II. Teflon III. Nylon (a) Only I (b) Only II (c) Only III (d) both I and II

Last Answer : both I and II

Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) Crimp is a measure of the difference between the length of the straightened and unstraightened fibre (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning

The first synthetic fibre made by man was- (1) Rayon (2) Nylon (3) Polyester (4) Terycott

Description : The first synthetic fibre made by man was- (1) Rayon (2) Nylon (3) Polyester (4) Terycott

Last Answer : (2) Nylon Explanation: Nylon, the first synthetic fiber in the "fully synthetic" sense of that term, was developed by Wallace Carothers, an American researcher at the chemical firm DuPont in the 1930s.

__________ is normally used for the manufacture of refrigerator components and transistor parts. (A) Polypropylene (B) Polystyrene (C) Polyester (D) Polyurethane

Description : __________ is normally used for the manufacture of refrigerator components and transistor parts. (A) Polypropylene (B) Polystyrene (C) Polyester (D) Polyurethane

Last Answer : (B) Polystyrene

Acrilan fibres used for making cloth, carpet & blankets, which is a hard, horny & high melting polymeric material is nothing but (A) Polyacrylonitrile (B) Polyamide (C) Saturated polyester (D) Alkyd resin

Description : Acrilan fibres used for making cloth, carpet & blankets, which is a hard, horny & high melting polymeric material is nothing but (A) Polyacrylonitrile (B) Polyamide (C) Saturated polyester (D) Alkyd resin

Last Answer : (A) Polyacrylonitrile

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Common house hold glass (i.e., soda-lime glass) is a/an __________ material. (A) Fully crystalline (B) Partly crystalline (C) Amorphous

Description : Common house hold glass (i.e., soda-lime glass) is a/an __________ material. (A) Fully crystalline (B) Partly crystalline (C) Amorphous

Last Answer : (B) Partly crystalline

Viscoelastic behaviour is observed in __________ materials. (A) Non-crystalline organic polymeric (B) Ceramic (C) All crystalline (D) All amorphous

Description : Viscoelastic behaviour is observed in __________ materials. (A) Non-crystalline organic polymeric (B) Ceramic (C) All crystalline (D) All amorphous

Last Answer : Non-crystalline organic polymeric

Which of the following polymers does not belong to the class of Polyacrylate polymer? (A) PMMA(B) Polyacrylonitrile(C) Poly Ethyl acrylate(D) None of these

Description : Which of the following polymers does not belong to the class of Polyacrylate polymer? (A) PMMA (B) Polyacrylonitrile (C) Poly Ethyl acrylate (D) None of these

Last Answer : (D) None of these

__________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC

Description : __________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC

Last Answer : (A) Nylon-66

Which of the following is generally not drawn into fibre? (A) Polyamide (B) Unsaturated polyesters (C) Saturated polyesters (D) Polyacrylonitrile

Description : Which of the following is generally not drawn into fibre? (A) Polyamide (B) Unsaturated polyesters (C) Saturated polyesters (D) Polyacrylonitrile

Last Answer : (B) Unsaturated polyesters

Contact lenses for eyes are made of Perspex, which is nothing but (A) poly-methyl-methacrylate (B) Polystyrene (C) Unsaturated polyester (D) Polypropylene

Description : Contact lenses for eyes are made of Perspex, which is nothing but (A) poly-methyl-methacrylate (B) Polystyrene (C) Unsaturated polyester (D) Polypropylene

Last Answer : (A) poly-methyl-methacrylate

Flexible plastic pipes are made of (A) High density polyethylene (HDPE) (B) Low density polyethylene (LDPE) (C) Polypropylene (D) Unsaturated polyester

Description : Flexible plastic pipes are made of (A) High density polyethylene (HDPE) (B) Low density polyethylene (LDPE) (C) Polypropylene (D) Unsaturated polyester

Last Answer : (B) Low density polyethylene (LDPE)

The most commonly used resin for making reinforced plastic is (A) Unsaturated polyester (B) Polypropylene

Description : The most commonly used resin for making reinforced plastic is (A) Unsaturated polyester (B) Polypropylene

Last Answer : (A) Unsaturated polyester

Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon

Description : Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon

Last Answer : (B) Cellulose derivatives, Polyisoprene, Polyethylene

Rayon is a __________ fibre. (A) Cellulosic (B) Polyamide (C) Polyester (D) Natural

Description : Rayon is a __________ fibre. (A) Cellulosic (B) Polyamide (C) Polyester (D) Natural

Last Answer : (A) Cellulosic

Charcoal is (a) Amorphous (b) Crystalline (c) Hygroscopic (d) None of these

Description : Charcoal is (a) Amorphous (b) Crystalline (c) Hygroscopic (d) None of these

Last Answer : Ans:(a)

Diamond is the form of carbon that is (a) Crystalline (b) Amorphous (c) Chemical (d) Alkaline

Description : Diamond is the form of carbon that is (a) Crystalline (b) Amorphous (c) Chemical (d) Alkaline

Last Answer : Ans:(a)

Diamond is the form of carbon that is - (1) Crystalline (2) Amorphous (3) Chemical (4) Alkaline

Description : Diamond is the form of carbon that is - (1) Crystalline (2) Amorphous (3) Chemical (4) Alkaline

Last Answer : (1) Crystalline Explanation: Diamond is a solid form of the element carbon with its atoms arranged in a crystal structure called diamond cubic.

Compare the properties of amorphous and crystalline silicon

Description : Compare the properties of amorphous and crystalline silicon

Last Answer : morphous silicon It is a brown powder It does not conduct electricity at low temperatures. It is more reactive than crystalline silicon When heated in air, it oxidizes at the surface level ... electricity It is less reactive than amorphous silicon It does not burn in air even when heated

A solid in which there is no regular arrangement of molecules is a) Amorphous b) Crystalline c) Copper d) None of above

Description : A solid in which there is no regular arrangement of molecules is a) Amorphous b) Crystalline c) Copper d) None of above

Last Answer : a) Amorphous

A solid is which atoms are in a regular order is called a) Crystalline solid b) Amorphous solid c) Polymeric solid d) Glassy solid

Description : A solid is which atoms are in a regular order is called a) Crystalline solid b) Amorphous solid c) Polymeric solid d) Glassy solid

Last Answer : a) Crystalline solid

Which of the following is an example of a condensation polymer? (a) Nylon-6,6 (b) Teflon (c) Polypropylene (d) Orlon

Description : Which of the following is an example of a condensation polymer? (a) Nylon-6,6 (b) Teflon (c) Polypropylene (d) Orlon

Last Answer : Nylon-6,6

Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Description : Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Last Answer : (A) Polyamide

Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Description : Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Last Answer : (B) Teflon

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Description : In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Last Answer : (A) Bakelite (phenol formaldehyde)

Nylon-6, 10 which is used for bristles making is superior to nylon 6, 6 due to its lower water absorption capacity, is a/an (A) Polyester (B) Polyamide (C) Polyisopren

Description : Nylon-6, 10 which is used for bristles making is superior to nylon 6, 6 due to its lower water absorption capacity, is a/an (A) Polyester (B) Polyamide (C) Polyisopren

Last Answer : (B) Polyamide

In bag filters, filter fabrics are never made of (A) Metallic wire woven mesh (B) Polyester fibres (C) Cotton fibres (D) Nylon fibres

Description : In bag filters, filter fabrics are never made of (A) Metallic wire woven mesh (B) Polyester fibres (C) Cotton fibres (D) Nylon fibres

Last Answer : (A) Metallic wire woven mesh

Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Description : Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Last Answer : (A) Polyamide

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Which of the following polymers has the tendency of decomposing before melting? (A) Polystyrene (B) Nylon (C) PVC (D) None of these

Description : Which of the following polymers has the tendency of decomposing before melting? (A) Polystyrene (B) Nylon (C) PVC (D) None of these

Last Answer : (C) PVC

The substance that is least prone to catch and spread fire is (a) nylon (b) terycot (c) cotton (d) polyester

Description : The substance that is least prone to catch and spread fire is (a) nylon (b) terycot (c) cotton (d) polyester

Last Answer : Ans:(c)

Nylon threads are made of - (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Description : Nylon threads are made of - (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Last Answer : (2) Polyamide polymer Explanation: Nylon is a generic designation for a family of synthetic polymers, more specifically aliphatic or semiaromatic polyamides. They can be melt-processed into fibers, ... . Nylon polymers have found significant commercial applications in fibers, in shapes and in films.

Which of the following best describes Nylon? w) polyamide x) polyester y) polyolefin z) acrylic

Description : Which of the following best describes Nylon? w) polyamide x) polyester y) polyolefin z) acrylic

Last Answer : ANSWER: W -- POLYAMIDE

Nylon threads are made of (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Description : Nylon threads are made of (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Last Answer : Polyamide polymer

The fiber least prone to catch fire is (1) nylon (2) polyester (3) cotton (4) terylene

Description : The fiber least prone to catch fire is (1) nylon (2) polyester (3) cotton (4) terylene

Last Answer : cotton

Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Last Answer : (B) Magnitude of intermolecular forces

Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Description : Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Last Answer : Ans: Nylon 6 —Condensation polymer  Neoprene and PVC— Addition polymer.

Clasify the polymers as addition and condenstation polymers. Nylon 66, Buna-S, Polythene.

Description : Clasify the polymers as addition and condenstation polymers. Nylon 66, Buna-S, Polythene.

Last Answer : Ans: Nylon 66 condensation polymer.  Buna-S and polythene—Addition polymer.