The lowest resistance grounding on earth A. Sand B. Clay C. Surface loam soil D. Limestone

The lowest resistance grounding on earth
A. Sand
B. Clay
C. Surface loam soil
D. Limestone
by

1 Answer

Answer :

C. Surface loam soil
by

Related questions

Which of the following soil type is most suitable for garlic cultivation ? (A) Loamy sand (B) Sandy loam (C) Loam (D) Clay

Description : Which of the following soil type is most suitable for garlic cultivation ? (A) Loamy sand (B) Sandy loam (C) Loam (D) Clay

Last Answer : (B) Sandy loam

Which of the following soil texture is lighter than others? a Silty clay loam. b Clay loam. c Sandy loam. d Loamy sand.

Description : Which of the following soil texture is lighter than others? a Silty clay loam. b Clay loam. c Sandy loam. d Loamy sand.

Last Answer : d Loamy sand.

Lowest pore space percentage recorded in — soil a. Clay b. Clay loam c. Loamy d. Sandy

Description : Lowest pore space percentage recorded in — soil a. Clay b. Clay loam c. Loamy d. Sandy

Last Answer : d. Sandy

For a given size of bucket, the ideal output of a dragline will be least in (A) Moist loam (B) Sand and gravel (C) Good common earth (D) Wet sticky clay

Description : For a given size of bucket, the ideal output of a dragline will be least in (A) Moist loam (B) Sand and gravel (C) Good common earth (D) Wet sticky clay

Last Answer : (D) Wet sticky clay

Match the following : A. Chernozems 1. Rich in calcium carbonate B. Black soil 2. Contains aluminium compound C. Laterite 3. Richest soils in the world D. Terra Rosa 4. Formed in limestone E. Alluvial soil 5. It is a mixture of clay, sand and silt A B C D E (a) 1 2 3 4 5 (b) 3 1 2 4 5 (c) 4 5 3 1 2 (d) 3 4 5 2 1

Description : Match the following : A. Chernozems 1. Rich in calcium carbonate B. Black soil 2. Contains aluminium compound C. Laterite 3. Richest soils in the world D. Terra Rosa 4. Formed in limestone E. Alluvial soil 5. It is a mixture of clay, sand and ... 1 2 3 4 5 (b) 3 1 2 4 5 (c) 4 5 3 1 2 (d) 3 4 5 2 1

Last Answer : Ans: (b)

Which of the following soil type has the highest field capacity ? (A) Loam (B) Silty loam (C) Clayey loam (D) Clay

Description : Which of the following soil type has the highest field capacity ? (A) Loam (B) Silty loam (C) Clayey loam (D) Clay

Last Answer : (D) Clay

Which type of soil is best for knolkhol ? (A) Loam (B) Clayey loam (C) Silty clayey loam (D) Clay

Description : Which type of soil is best for knolkhol ? (A) Loam (B) Clayey loam (C) Silty clayey loam (D) Clay

Last Answer : (B) Clayey loam

Rabi Oilseeds Mustard can be grown under which soil? a. Heavy clay soil b. Light loam c. Light sandy soil d. All of the above e. None of the above

Description : Rabi Oilseeds Mustard can be grown under which soil? a. Heavy clay soil b. Light loam c. Light sandy soil d. All of the above e. None of the above

Last Answer : e. None of the above

Wind Erosion will be higher from? a. Clay Soil b. Sandy Soil c. A barren sandy soil d. Loam Soil e. None of these

Description : Wind Erosion will be higher from? a. Clay Soil b. Sandy Soil c. A barren sandy soil d. Loam Soil e. None of these

Last Answer : c. A barren sandy soil

For which of the following materials, the output of power shovels for a fixed shovel size will be maximum (A) Moist loam (B) Good common earth (C) Well blasted rock (D) Wet sticky clay

Description : For which of the following materials, the output of power shovels for a fixed shovel size will be maximum (A) Moist loam (B) Good common earth (C) Well blasted rock (D) Wet sticky clay

Last Answer : (A) Moist loam

Which of the following characteristics is not true of alluvial soils? (a) These vary from sandy loam to clay in texture (b) These are generally rich in phosphorus but poor in potash (c) These are usually fine grained (d) These are by far the most fertile

Description : Which of the following characteristics is not true of alluvial soils? (a) These vary from sandy loam to clay in texture (b) These are generally rich in phosphorus but poor in potash (c) These are usually fine grained (d) These are by far the most fertile

Last Answer : Ans: (b)

Alluvial soils vary in nature from sandy loam to clay. They are generally - a. poor in potash and rich in phosphorus b. poor in both potash and phosphorus c. rich in both potash and phosphorus d. rich in potash and poor in phosphorus

Description : Alluvial soils vary in nature from sandy loam to clay. They are generally - a. poor in potash and rich in phosphorus b. poor in both potash and phosphorus c. rich in both potash and phosphorus d. rich in potash and poor in phosphorus

Last Answer : d. rich in potash and poor in phosphorus

Black cotton soils are a) Heavy clay soils varying from clay to Loam, with clay content of 40 to 50% formed by decomposition of rocks by long continued weathering* b) Compacted and laminated clays c) Soils containing carbon of coal underneath d) Dark brown earthy materials formed due to partial or complete decomposition of vegetable matter

Description : Black cotton soils are a) Heavy clay soils varying from clay to Loam, with clay content of 40 to 50% formed by decomposition of rocks by long continued weathering* b) Compacted and ... underneath d) Dark brown earthy materials formed due to partial or complete decomposition of vegetable matter

Last Answer : a) Heavy clay soils varying from clay to Loam, with clay content of 40 to 50% formed by decomposition of rocks by long continued weathering*

performance of naphthalic anhydride against EPTC was marginal in which type of soils a).clay b). clay loam c). loamy d). sandy silt

Description : performance of naphthalic anhydride against EPTC was marginal in which type of soils a).clay b). clay loam c). loamy d). sandy silt

Last Answer : d). sandy silt

Herbicide leaching is prominent in a). Sandy b). Sandy loam c). Clay loam d). loam

Description : Herbicide leaching is prominent in a). Sandy b). Sandy loam c). Clay loam d). loam

Last Answer : a). Sandy

Sand used to stop the green sand from sticking to the pattern is termed as the __________ sand. (A) Parting (B) Synthetic (C) Loam (D) Dry

Description : Sand used to stop the green sand from sticking to the pattern is termed as the __________ sand. (A) Parting (B) Synthetic (C) Loam (D) Dry

Last Answer : (A) Parting

In lighter texture soils such as , tillage can be undertaken at moisture levels below field capacity. A. Loam. C) Loam or sand B. Sand. D) Non of the above

Description : In lighter texture soils such as , tillage can be undertaken at moisture levels below field capacity. A. Loam. C) Loam or sand B. Sand. D) Non of the above

Last Answer : Loam or sand

Good grounding is important for A. horizontal antennas B. broadside array antennas C. vertical antennas D. Yagi-Uda antennas

Description : Good grounding is important for A. horizontal antennas B. broadside array antennas C. vertical antennas D. Yagi-Uda antennas

Last Answer : C. vertical antennas

Which of the following antennas require good grounding? A. Yagi antenna B. Hertz antenna C. Marconi antenna D. Isotropic antenna

Description : Which of the following antennas require good grounding? A. Yagi antenna B. Hertz antenna C. Marconi antenna D. Isotropic antenna

Last Answer : C. Marconi antenna

Which one is not the basic electrical protection measures in the Philippine Electronics Code? A. Voltage/ current limiting and interrupting B. Undergrounding C. Grounding and bonding D. Shielding

Description : Which one is not the basic electrical protection measures in the Philippine Electronics Code? A. Voltage/ current limiting and interrupting B. Undergrounding C. Grounding and bonding D. Shielding

Last Answer : B. Undergrounding

Why not high resistance for earth fault than using grounding transformer & resistor 0.45 ohms?

Description : Why not high resistance for earth fault than using grounding transformer & resistor 0.45 ohms?

Last Answer : It is mechanically unwide. Difficult to manufacture.  

the soil is primarily made of clay and it holds the water, can i add sand to the clay

Description : the soil is primarily made of clay and it holds the water, can i add sand to the clay

Last Answer : can you add some rocks under this to let it drain better...............some new dirt, sand mulch or tree bark and mix it up but some staggered rocks and build around the rocks. That's ... watered once or twice when I planted them. They were beautiful. Then I just picked off the dead flowers.

What is the name of the soil that is 60 silt 20 sand and 20 clay?

Description : What is the name of the soil that is 60 silt 20 sand and 20 clay?

Last Answer : Need answer

What is a type of soil that has significant amounts of sand silt and clay.?

Description : What is a type of soil that has significant amounts of sand silt and clay.?

Last Answer : Loamy Soil.

Which of the following is the correct order of increasing size of the grains of soil particles? 1. Clay 2. Silt 3. Sand 4. Gravel (a) BCDA (b) ABCD (c) DCBA (d) ADCB

Description : Which of the following is the correct order of increasing size of the grains of soil particles? 1. Clay 2. Silt 3. Sand 4. Gravel (a) BCDA (b) ABCD (c) DCBA (d) ADCB

Last Answer : Ans: (b)

The soil which is a mixture of sand, clay and silt is known as: (a) loamy soil (b) sandy soil (c) clayey soil (d) desert soil

Description : The soil which is a mixture of sand, clay and silt is known as: (a) loamy soil (b) sandy soil (c) clayey soil (d) desert soil

Last Answer : Ans: (a)

Deep black soil is productive due to high proportion of (a) sand and zinc (b) gravel and calcium (c) clay and humus (d) silt and earthworm.

Description : Deep black soil is productive due to high proportion of (a) sand and zinc (b) gravel and calcium (c) clay and humus (d) silt and earthworm.

Last Answer : (c) clay and humus

The relative proportion of sand, silt and clay is called (A) Soil texture (B) Soil aggregation (C) Soil structure (D) Soil taxonomy

Description : The relative proportion of sand, silt and clay is called (A) Soil texture (B) Soil aggregation (C) Soil structure (D) Soil taxonomy

Last Answer : (A) Soil texture

Pick up the incorrect statement from the following: (A) Porosity of clay sand soil is 45% (B) Porosity of pure sand is 35% (C) Porosity of sand stone is up to 15% (D) None of these

Description : Pick up the incorrect statement from the following: (A) Porosity of clay sand soil is 45% (B) Porosity of pure sand is 35% (C) Porosity of sand stone is up to 15% (D) None of these

Last Answer : (D) None of these

The soil which contains finest grain particles, is (A) Coarse sand (B) Fine sand (C) Silt (D) Clay

Description : The soil which contains finest grain particles, is (A) Coarse sand (B) Fine sand (C) Silt (D) Clay

Last Answer : (D) Clay

If the permeability of a soil is 0.8 mm/sec, the type of soil is (A) Gravel (B) Sand (C) Silt (D) Clay

Description : If the permeability of a soil is 0.8 mm/sec, the type of soil is (A) Gravel (B) Sand (C) Silt (D) Clay

Last Answer : (B) Sand

the plasticity index of a soil mass is zero, the soil is (A) Sand (B) Silt (C) Clay (D) Clayey silt

Description : the plasticity index of a soil mass is zero, the soil is (A) Sand (B) Silt (C) Clay (D) Clayey silt

Last Answer : (A) Sand

Cohesionless soil is (A) Sand (B) Silt (C) Clay (D) Clay and silt

Description : Cohesionless soil is (A) Sand (B) Silt (C) Clay (D) Clay and silt

Last Answer : (A) Sand

Consider the following statements: 1. For a saturated soil, Skempton’s B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing strength in case of dense sand. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. For a saturated soil, Skempton's B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing ... 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

Quicksand is a) Moist sand containing a small percentage of clay b) Is a condition which generally occurs in coarse sands c) Is a condition in which cohesive properties of soil increase rapidly d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

Description : Quicksand is a) Moist sand containing a small percentage of clay b) Is a condition which generally occurs in coarse sands c) Is a condition in which cohesive properties of soil increase rapidly d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

Last Answer : d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

High quality crop soil requires humus as a major component. Which of the following best describes the composition of humus w) fine sand particles x) decaying organic matter y) mineral like clay matter z) chemical fertilizers

Description : High quality crop soil requires humus as a major component. Which of the following best describes the composition of humus w) fine sand particles x) decaying organic matter y) mineral like clay matter z) chemical fertilizers

Last Answer : ANSWER: X -- DECAYING ORGANIC MATTER 

Bulking of sand is caused due to (A) Surface moisture (B) Air voids (C) Viscosity (D) Clay contents

Description : Bulking of sand is caused due to (A) Surface moisture (B) Air voids (C) Viscosity (D) Clay contents

Last Answer : Answer: Option A

The surface of a "desert pavement" is composed mainly of which of the following? w) loose sand x) sand and clay y) pebbles and boulders z) concrete and cement

Description : The surface of a "desert pavement" is composed mainly of which of the following? w) loose sand x) sand and clay y) pebbles and boulders z) concrete and cement

Last Answer : ANSWER: Y -- PEBBLES AND BOULDERS

kinds of soil:loam the vegetable grow in loam:eggplant

Description : kinds of soil:loam the vegetable grow in loam:eggplant

Last Answer : Need Answer

In the coastal lowland of Kerala two crops of rice is grown per year because of: [IAS 2003] 1. high temperature in winter 2. adequate rain throughout the year 3. adequate irrigation facility 4. presence of water retentive clayey loam soil (a) Only 1 (b) 2 and 3 (c) 1 and 2 (d) 1, 3, and 4

Description : In the coastal lowland of Kerala two crops of rice is grown per year because of: [IAS 2003] 1. high temperature in winter 2. adequate rain throughout the year 3. adequate irrigation facility 4. presence of water retentive clayey loam soil (a) Only 1 (b) 2 and 3 (c) 1 and 2 (d) 1, 3, and 4

Last Answer : Ans: (c)

Which one of the following is used in large quantities in Cement Industry? (1) Gypsum (2) Limestone (3) Coal (4) Clay

Description : Which one of the following is used in large quantities in Cement Industry? (1) Gypsum (2) Limestone (3) Coal (4) Clay

Last Answer : (2) Limestone Explanation: Limestone, as used by the minerals industry, is any rock composed mostly of calcium carbonate (CaCO3). Limestone is used to produce Portland cement, as aggregate ... products, making it a truly versatile commodity. Portland cement is essential to the building industry.

Chemical composition of cement is – (1) Limestone and Clay (2) Limestone, Clay and Gypsum (3) Limestone and Gypsum (4) Clay and Gypsum

Description : Chemical composition of cement is – (1) Limestone and Clay (2) Limestone, Clay and Gypsum (3) Limestone and Gypsum (4) Clay and Gypsum

Last Answer : (2) Limestone, Clay and Gypsum Explanation: The two important raw materials used for the preparation of cement are : • Limestone : The chemical formula of limestone is CaCO3 and it is used in the manufacture of cement just to provide CaO.

Cement is formed by strongly heating a mixture of – (1) limestone and graphite (2) limestone and clay (3) chalk and graphite (4) clay and graphite

Description : Cement is formed by strongly heating a mixture of – (1) limestone and graphite (2) limestone and clay (3) chalk and graphite (4) clay and graphite

Last Answer : (2) limestone and clay Explanation: Cement is made by heating limestone (calcium carbonate) with small quantities of other materials (such as clay) to 1450 degree C in a kiln, in a process known as ... , or quicklime, which is then blended with the other materials that have been included in the mix.

Which is/ are the important raw materials in cement industry? (1) Limestone (2) Gypsum and Clay (3) Clay (4) Limestone and Clay

Description : Which is/ are the important raw materials in cement industry? (1) Limestone (2) Gypsum and Clay (3) Clay (4) Limestone and Clay

Last Answer : (4) Limestone and Clay Explanation: Limestone Claimed Clay Cement is a low-carbon alternative to the standard Portland cement. LC3 can reduce CO2 emissions related to cement manufacturing of cement by reducing the amount of clinker, replacing it with limestone and claimed clays.

When clay hardens into rock, it forms: w) coal x) limestone y) shale z) quartzite

Description : When clay hardens into rock, it forms: w) coal x) limestone y) shale z) quartzite

Last Answer : ANSWER: Y -- SHALE

The principal aquifer of the artesian wells of Florida is a: w) porous sandstone x) fissured limestone y) series of clay beds z) mass of pumice

Description : The principal aquifer of the artesian wells of Florida is a: w) porous sandstone x) fissured limestone y) series of clay beds z) mass of pumice

Last Answer : ANSWER: X -- FISSURED LIMESTONE

Chemical composition of cement is (1) Limestone and Clay (2) Limestone, Clay and Gypsum (3) Limestone and Gypsum (4) Clay and Gypsum

Description : Chemical composition of cement is (1) Limestone and Clay (2) Limestone, Clay and Gypsum (3) Limestone and Gypsum (4) Clay and Gypsum

Last Answer :  Limestone, Clay and Gypsum

Cement is formed by strongly heating a mixture of (1) limestone and graphite (2) limestone and clay (3) chalk and graphite (4) clay and graphite

Description : Cement is formed by strongly heating a mixture of (1) limestone and graphite (2) limestone and clay (3) chalk and graphite (4) clay and graphite 

Last Answer : limestone and clay

Raw materials used for the manufacture of glass are – (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Description : Raw materials used for the manufacture of glass are – (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Last Answer : (1) sand, soda, limestone Explanation: Quartz sand (silica) is the main raw material in commercial glass production. While fused quartz (primarily composed of SiO2) is used for some special ... over 1200 degree C (2192 degree F). Normally, other substances are added to simplify processing.

Mortar is a mixture of water sand and (1) Slaked lime (2) Quick lime (3) Limestone (4) Gypsum

Description : Mortar is a mixture of water sand and (1) Slaked lime (2) Quick lime (3) Limestone (4) Gypsum

Last Answer : (1) Slaked lime Explanation: Mortar is a workable paste used to bind construction blocks together and fill the gaps between them. The blocks may be stone, brick, cinder blocks, etc. Mortar becomes hard ... Mortar can also be used to fix, or point, masonry when the original mortar has washed away.