Description : Referred by radio regulation as the station in the mobile service not intended to be used while in motion. A. Fixed station B. Base station C. Land station D. Coast station
Last Answer : C. Land station
Description : Refers to a land station in a maritime mobile service A. Coast station B. Ship earth station C. Coast earth station D. Maritime station
Last Answer : A. Coast station
Description : A radio land station in the land mobile service A. Mobile station B. Land station C. Base station D. Ship earth station
Last Answer : C. Base station
Description : Station located on an object which is beyond and is intended to go beyond the major portion of the earth’s atmosphere. A. Terrestrial station B. Space station C. Satellite station D. Mobile satellite station
Last Answer : B. Space station
Description : A radio communications service use in radio regulation between specified fixed points provided primarily for the safety of air navigation and for the regular efficient and economical air transport ... operation service B. Space service C. Aeronautical mobile service D. Aeronautical fixed service
Last Answer : D. Aeronautical fixed service
Description : Radio communication operation service between mobile and land stations or between mobile stations. A. Land mobile satellite service B. Maritime mobile service C. Mobile service D. Land mobile
Last Answer : C. Mobile service
Description : This is referred to as a fixed radio station that broadcasts program material from studio to transmitter by radio link. A. Aural BC intercity relay B. Aural broadcast STL C. Shortwave station D. Remote-pickup
Last Answer : B. Aural broadcast STL
Description : What is the proper procedure for suppressing electrical noise in a mobile station? A. Apply shielding and filtering where necessary B. Insulate a all plain sheet metal surfaces from each other C. ... -static spray liberally to all nonmetallic D. Install filter capacitors in series with all dc wiring
Last Answer : A. Apply shielding and filtering where necessary
Description : Which of the following systems uses frequency band 870-885 MHz as a transmit band of its base station? A. TACS B. NTT C. NMT D. AMPS
Last Answer : B. NTT
Description : In cellular system, the average lead time to install a new base station is approximately ____ months to a year. A. 4 B. 5 C. 6 D. 10
Last Answer : C. 6
Description : An area on the surface of the earth within which the bore sight of the steerable satellite beam intended to be pointed A. Effective boresight area B. Countour boresight are C. Coordination boresight are D. Equivalent boresight area
Last Answer : A. Effective boresight area
Description : Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz
Last Answer : B. 156.8 MHz
Description : In IEEE 802.11, a___ is made of stationary or mobile wireless stations and anoptional central base station, known as the access point (AP). A) ESS B) BSS C) CSS D) none of the above
Last Answer : BSS
Description : In a ______ handoff, a mobile station can communicate with two base stations at the same time
Last Answer : . soft
Description : In a ______ handoff, a mobile station only communicates with one base station
Last Answer : hard
Description : At the base station, the air interface portion of mobile transmission is passed to MSC. a) True b) False
Last Answer : b) False
Description : Which of the following channel is used by base station to provide forward link communication to mobile? a) RACH b) AGCH c) DCCH d) PCH
Last Answer : b) AGCH
Description : When a mobile telephone physically moves from one to another cell, the base station transfers ownership to the cell getting strongest signal. This process is known as................. (A) handoff (B) mobile switching (C) mobile routing (D) cell switching
Last Answer : (A) handoff
Description : Define the following terms : (i) Base Station (ii) Control Channel (iii) Mobile Station (iv) Page
Last Answer : i) Base Station: - A fixed station in a mobile radio system used for radio communication with mobile stations. Base stations are located at the center or on the edge of a coverage region ... the page throughout the service area using base stations which broadcast the page on a radio carrier.
Description : Mark correct option a) Station articles are intended for delivery from a PO to which they are sent b) Sorting articles are articles that are to be sorted by the Poor Mail Office to which they ... Express bundle require to sort immediately & Differed bundle may be disposed later. e) All the above
Last Answer : e) All the above
Description : Strong interference from one particular station can be eliminated by the use of A. noise limiters B. squelch circuits C. negative feedback D. wave traps in the antenna circuitry
Last Answer : D. wave traps in the antenna circuitry
Description : How does the electric field strength of a standard broadcast station vary with the distance from the antenna? A. The field strength of a standard broadcast station vary with the distance from ... the distance from the antenna D. The field strength varies inversely as the distance from the antenna
Last Answer : D. The field strength varies inversely as the distance from the antenna
Description : What is the propagation delay when a signal is transmitter by an earth station to a geosynchronous satellite about 38,500 km above earth’s equator and then received by the same earth station? A. 256 msec B. 128 msec C. 300 msec D. 400 msec
Last Answer : A. 256 msec
Description : The control routine necessary to keep the satellite in position is referred to as A. station keeping B. station tracking C. station monitoring D. station maintaining
Last Answer : A. station keeping
Description : Designed to receive a signal from a transmitting station on the ground and retransmit it to a receiving station located elsewhere A. Communication satellite B. Repeater C. Relay station D. Transponder
Last Answer : A. Communication satellite
Description : The signal path from earth station satellite A. Uplink signal B. Reflected signal C. Incident signal D. Downlink signal
Last Answer : A. Uplink signal
Description : The receive GCE system in an earth station performs what function(s)? A. Modulation and multiplexing B. Up conversion C. Demodulation and demultiplexing D. Down conversion
Last Answer : C. Demodulation and demultiplexing
Description : Earth station uses what type of antenna A. Despun antenna B. Helical antenna C. Toroidal antenna D. Cassegrain antenna
Last Answer : D. Cassegrain antenna
Description : What is the approximate path loss from satellite-to-earth station? A. 100 dB B. 150 dB C. 175 dB D. 200 dB
Last Answer : D. 200 dB
Description : A satellite signal transmitted from a satellite transponder to earth’s station. A. Uplink B. Downlink C. Terrestrial D. Earthbound
Last Answer : B. Downlink
Description : The computer which initiates information transfer A. Master B. Station C. Slave D. Mainframe
Last Answer : A. Master
Description : When can a corporation or association incorporated under the Philippine laws and with foreign investors be granted radio station license? A. When 60% of the capital is owned by Filipino citizens B. ... of the board is a Filipino D. When the president of the corporation/association is a Filipino
Last Answer : A. When 60% of the capital is owned by Filipino citizens
Description : What is the channel number of an FM station with a carrier frequency of 99.5 MHz? A. 256 B. 258 C. 257 D. 259
Last Answer : B. 258
Description : A ground station is operating to a geostationary satellite at a 5° angle of elevation. Calculate the round-trip time between ground station and satellite. A. 275 s B. 275 ms C. 137.5 s D. 137.5 ms
Last Answer : B. 275 ms
Description : In satellite communications, what means of attitude control is using the angular momentum of the spinning body to provide the roll and yaw stabilization? A. Spin stabilization B. Radial stabilization C. Three-axis stabilization D. Station keeping
Last Answer : A. Spin stabilization
Description : What satellite system parameter represents the quality of a satellite or an earth station receiver? A. Gain-to-Equivalent Noise Temperature Ratio (G/Te) B. Energy of Bit-to-Noise Density Ratio (Eb/No) C. Carrier-to-Noise Density Ratio (C/No) D. Bit energy
Last Answer : A. Gain-to-Equivalent Noise Temperature Ratio (G/Te)
Description : An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz
Last Answer : D. 99.7 MHz
Description : What is a selective fading effect? A. A fading effect caused by small changes in beam heading at the receiving station. B. A fading effect caused by phase differences between radio wave ... station D. A fading effect caused by time differences between the receiving and transmitting stations.
Last Answer : B. A fading effect caused by phase differences between radio wave components of the same transmission, as experienced at the receiving station.
Description : What propagation condition is usually indicated when a VHF signal is received from a station over 500 miles away? A. D-layer absorption B. Faraday rotation C. Tropospheric ducting D. Moonbounce
Last Answer : C. Tropospheric ducting
Description : What is the major cause of selective fading? A. Small changes in the beam heading at the receiving station. B. Large changes in the height of the ionosphere, as experience at the ... Phase differences between radio wave components of the same transmission, as experienced at the receiving station.
Last Answer : D. Phase differences between radio wave components of the same transmission, as experienced at the receiving station.
Description : What satellite subsystem monitors onboard conditions such as temperature and battery voltage and transmits this data back to a ground station for analysis? A. Communications subsystem B. AKM C. TTC D. Transponder
Last Answer : C. TTC
Description : When does broadcast station conduct and equipment test? A. During day time B. During night time C. At any time D. During experimental period
Last Answer : D. During experimental period
Description : The frequency tolerance of an AM radio broadcast station A. 200 Hz B. 2000 Hz C. 20 Hz D. 2 Hz
Last Answer : C. 20 Hz
Description : What propagation condition is usually indicated when a VHF signal is received from a station over 5000 miles away? A. Moonbounce B. D-layer absorption C. Tropospheric ducting D. Faraday rotation
Description : Known as the satellite transmitted signal form a satellite transponder to earth’s station. A. Uplink B. Down link C. RHCP D. Vertically polarized
Last Answer : B. Down link
Description : What is the basic qualification of an applicant for public carrier network before a certificate of public convenience or a provisional authority is issued? A. Franchise B. SEC document C. Business permit D. Radio station license
Last Answer : A. Franchise
Description : Refers to an effect of selective fading. A. A fading effect caused by phase differences between radio wave components of the same transmission, as experienced at the receiving station. B. A fading ... caused by large changes in the height of the ionosphere, as experienced at the receiving station.
Last Answer : A. A fading effect caused by phase differences between radio wave components of the same transmission, as experienced at the receiving station.
Description : Satellite system or part of a satellite system, consisting of only one satellite and the operating earth station. A. Satellite system B. Satellite network C. Space system D. Multi-satellite link
Last Answer : B. Satellite network
Description : A satellite receives an uplink frequency of _______ MHz from a ground station of 3700 MHz. A. 8150 MHz B. 1475 MHz C. 2225 MHz D. 5925 MHz
Last Answer : D. 5925 MHz
Description : Production of radiation by a radio transmitting station A. Monitoring B. Emission C. Radiation D. Transmission
Last Answer : B. Emission