Along with expression, define slenderness ration.

Along with expression, define slenderness ration.
by

1 Answer

Answer :

Slenderness Ratio: Slenderness ratio is defined as the ratio of effective length of column to its minimum radius of gyration.

image

by

Related questions

Along with the expression define radius of gyration and sectional modulus.

Description : Along with the expression define radius of gyration and sectional modulus.

Last Answer : Radius of gyration (K): The radius of gyration of a given area about any axis is the distance from the given axis at which the area is assumed to be concentrated without changing the MI about the given ... It is the ratio of moment of inertia to the distance of extreme fiber from neutral axis.

Slenderness ratio of a long column, is (A) Area of cross-section divided by radius of gyration (B) Area of cross-section divided by least radius of gyration (C) Radius of gyration divided by area of cross-section (D) Length of column divided by least radius of gyration

Description : Slenderness ratio of a long column, is  (A) Area of cross-section divided by radius of gyration  (B) Area of cross-section divided by least radius of gyration  (C) Radius of gyration divided by area of cross-section  (D) Length of column divided by least radius of gyration 

Last Answer : (D) Length of column divided by least radius of gyration 

The slenderness ratio of a vertical column of square cross- section of 10 cm side and 500 cm long, is (A) 117.2 (B) 17.3 (C) 173.2 (D) 137.2

Description : The slenderness ratio of a vertical column of square cross- section of 10 cm side and 500 cm long, is (A) 117.2 (B) 17.3 (C) 173.2 (D) 137.2

Last Answer : (C) 173.2

The ratio of the effective length of a column and minimum radius of gyration of its cross-sectional area, is known (A) Buckling factor (B) Slenderness ratio (C) Crippling factor (D) None of these

Description : The ratio of the effective length of a column and minimum radius of gyration of its cross-sectional area, is known (A) Buckling factor (B) Slenderness ratio (C) Crippling factor (D) None of these

Last Answer : (B) Slenderness ratio

A column is said to be of medium size if its slenderness ratio is between (A) 20 and 32 (B) 32 and 120 (C) 120 and 160(D) 160 and 180

Description : A column is said to be of medium size if its slenderness ratio is between (A) 20 and 32 (B) 32 and 120 (C) 120 and 160 (D) 160 and 180

Last Answer : (B) 32 and 120

The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (A) 200 (B) 240 (C) 360 (D) 416

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm  length, is  (A) 200  (B) 240  (C) 360  (D) 416

Last Answer : (D) 416

If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is (A) 40 (B) 45 (C) 50 (D) 55

Description : If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is (A) 40 (B) 45 (C) 50 (D) 55

Last Answer : Answer: Option D

An R.C.C. column is treated as long if its slenderness ratio is greater than (A) 30 (B) 35 (C) 40 (D) 50

Description : An R.C.C. column is treated as long if its slenderness ratio is greater than (A) 30 (B) 35 (C) 40 (D) 50

Last Answer : Answer: Option D

An R.C.C. column is treated as short column if its slenderness ratio is less than (A) 30 (B) 35 (C) 40 (D) 50

Description : An R.C.C. column is treated as short column if its slenderness ratio is less than (A) 30 (B) 35 (C) 40 (D) 50

Last Answer : Answer: Option D

According to IS: 4561978, minimum slenderness ratio for a short column is (A) Less than 12 (B) Less than 18 (C) Between 18 and 24 (D) More than 24

Description : According to IS: 4561978, minimum slenderness ratio for a short column is (A) Less than 12 (B) Less than 18 (C) Between 18 and 24 (D) More than 24

Last Answer : Answer: Option A

The slenderness ratio for masonry walls should not be more than (A) 10 (B) 20 (C) 30 (D) 40

Description : The slenderness ratio for masonry walls should not be more than (A) 10 (B) 20 (C) 30 (D) 40

Last Answer : Answer: Option B

Why Slenderness Ratio Is Considered In Design Of Members?

Description : Why Slenderness Ratio Is Considered In Design Of Members?

Last Answer : When length of the member is increased, the member may fail due to buckling even though the member is symmetrical in all respects and the load is concentric.

According to IS 456, minimum slenderness ratio for a short concrete column is (a) Less than 12 (b) Between 12 and 18 (c) Between 18 and 24 (d) More than 24

Description : According to IS 456, minimum slenderness ratio for a short concrete column is (a) Less than 12 (b) Between 12 and 18 (c) Between 18 and 24 (d) More than 24

Last Answer : (a) Less than 12

Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, if cement mortar 1:6 is used\ Which of these statements are correct? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Description : Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, ... ? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Last Answer : b) 2 and 3 only

Maximum slenderness ratio for load-bearing masonry wall in cement mortar, as per IS code, shall not exceed. (a) 13 (b) 20 (c) 27 (d) 30

Description : Maximum slenderness ratio for load-bearing masonry wall in cement mortar, as per IS code, shall not exceed. (a) 13 (b) 20 (c) 27 (d) 30

Last Answer : (c) 27

When a column is supported throughout its length either by masonry walls or by construction on all the sides, then its slenderness ratio is (a) Infinite (b) Zero (c ) Reasonably high (d) Low

Description : When a column is supported throughout its length either by masonry walls or by construction on all the sides, then its slenderness ratio is (a) Infinite (b) Zero (c ) Reasonably high (d) Low

Last Answer : (b) Zero

The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending strength and axial yield strength of material (c) Buckling strength based on the net area of the section and percentage elongation at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Description : The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending ... at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Last Answer : (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

According to IS:456-2000, the minimum slenderness ratio for a short column is [ A ] Less than 12 [ B ] Between 12 and 18 [ C ] Less than 18 [ D ] Must be greater than 18

Description : According to IS:456-2000, the minimum slenderness ratio for a short column is [ A ] Less than 12 [ B ] Between 12 and 18 [ C ] Less than 18 [ D ] Must be greater than 18

Last Answer : [ A ] Less than 12

Which of the following method that is used to taken into account the slenderness effect of columns according to IS:456 - 2000 [ A ] Reduction coefficient method [ B ] Slenderness method [ C ] Moment magnification method [ D ] None of the above

Description : Which of the following method that is used to taken into account the slenderness effect of columns according to IS:456 - 2000 [ A ] Reduction coefficient method [ B ] Slenderness method [ C ] Moment magnification method [ D ] None of the above

Last Answer : [ A ] Reduction coefficient method

A Column is said to be short, when the slenderness ratio is [ A ] Less than 6 [ B ] Less than 12 [ C ] Less than 18 [ D ] None of the above

Description : A Column is said to be short, when the slenderness ratio is [ A ] Less than 6 [ B ] Less than 12 [ C ] Less than 18 [ D ] None of the above

Last Answer : [ B ] Less than 12

Slenderness ratio of the column is the ratio of [ A ] the effective length to width of column [ B ] the effective length to depth of column [ C ] the effective length to least lateral design [ D ] none of the above

Description : Slenderness ratio of the column is the ratio of [ A ] the effective length to width of column [ B ] the effective length to depth of column [ C ] the effective length to least lateral design [ D ] none of the above

Last Answer : [ C ] the effective length to least lateral design

The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 240 (b) 416 (c) 360 (d) 400

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 240 (b) 416 (c) 360 (d) 400

Last Answer : (b) 416

If the slenderness ratio for a column is 100, then it is said to be a __________ column. (a) Long (b) medium (c)short (d) big

Description : If the slenderness ratio for a column is 100, then it is said to be a __________ column. (a) Long (b) medium (c)short (d) big

Last Answer : (a) Long

The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 200 (b) 240 (c) 360 (d) 416

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 200 (b) 240 (c) 360 (d) 416

Last Answer : (d) 416

The ratio of the effective length of a column and minimum radius of gyration of its cross sectionalarea, is known (a) Buckling factor (b) Slenderness ratio (c) Crippling factor (d) None of these

Description : The ratio of the effective length of a column and minimum radius of gyration of its cross sectionalarea, is known (a) Buckling factor (b) Slenderness ratio (c) Crippling factor (d) None of these

Last Answer : (b) Slenderness ratio

A column is said to be of medium size if its slenderness ratio is between (a) 20 and 32 (b) 32 and 120 (c) 120 and 160 (d) 160 and 180

Description : A column is said to be of medium size if its slenderness ratio is between (a) 20 and 32 (b) 32 and 120 (c) 120 and 160 (d) 160 and 180

Last Answer : (b) 32 and 120

A steel column is a medium column when the slenderness ratio is (a) >120 (b) <30 (c) >30 (d) None

Description : A steel column is a medium column when the slenderness ratio is (a) >120 (b) 30 (d) None

Last Answer : (c) >30

A steel column is a long column when the slenderness ratio is (a) >120 (b) <30 (c) >30 (d) None

Description : A steel column is a long column when the slenderness ratio is (a) >120 (b) 30 (d) None

Last Answer : (a) >120

A steel column is a short column when the slenderness ratio is (a) >120 (b) <30 (c) >30 (d) None

Description : A steel column is a short column when the slenderness ratio is (a) >120 (b) 30 (d) None

Last Answer : (b)

Euler’s formula is not valid for mild steel column when slenderness ratio is (a) More than 100 (b) Less than 100 (c) Less than 80 (d)More than 80

Description : Euler’s formula is not valid for mild steel column when slenderness ratio is (a) More than 100 (b) Less than 100 (c) Less than 80 (d)More than 80

Last Answer : (c) Less than 80

Rankine’s formula is generally used when slenderness ratio lies in between (a) 0-60 (b) 0-80 (c) 0-100 (d) Any value

Description : Rankine’s formula is generally used when slenderness ratio lies in between (a) 0-60 (b) 0-80 (c) 0-100 (d) Any value

Last Answer : (d) Any value

The slenderness ratio is the ratio of (a) Length of column to least radius of gyration (b) Moment of inertia to area of cross-section (c) Area of cross-section to moment of inertia (d) Least radius of gyration to length of the column

Description : The slenderness ratio is the ratio of (a) Length of column to least radius of gyration (b) Moment of inertia to area of cross-section (c) Area of cross-section to moment of inertia (d) Least radius of gyration to length of the column

Last Answer : (a) Length of column to least radius of gyration

A column whose slenderness ratio is greater than 120 is known as (a) Short column (b) Long column (c) Medium column (d) Composite column

Description : A column whose slenderness ratio is greater than 120 is known as (a) Short column (b) Long column (c) Medium column (d) Composite column

Last Answer : (b) Long column

Would you ration to survive?

Description : Would you ration to survive?

Last Answer : Yes. I already do in an informal way.

In Tamil Nadu, 75% of the people living in rural areas use a ration shop, whereas in Jharkhand only 8% of rural people do so. -SST 10th

Description : In Tamil Nadu, 75% of the people living in rural areas use a ration shop, whereas in Jharkhand only 8% of rural people do so. -SST 10th

Last Answer : Health and nutritional status of people depends on availability of cheap and reasonable quality food grains, sugar and other item from the PDS system. So, in Kerala, the people will be better off, since more people there unities the facilities provided by the PDS system.

in tamil nadu 90 percent of the people living in rural areas use ration shops whereas in west bengla only 35 percent of the people use ration shops tell where the people are better off and why -SST 10th

Description : in tamil nadu 90 percent of the people living in rural areas use ration shops whereas in west bengla only 35 percent of the people use ration shops tell where the people are better off and why -SST 10th

Last Answer : Tamil Nadu Because of public facilities development in Tam Nadu is better. It is closely linked to public facilities in West Bengal, all the poor people cannot get good food because of the very ... the literacy rate decreases. Thus, West Bengal is regarded as less developed than that of Tamilnadu.

What is balanced ration made with ?

Description : What is balanced ration made with ?

Last Answer : : Balanced ration is made with granular food.

What is the meaning of the word ration ?

Description : What is the meaning of the word ration ?

Last Answer : Allocated amount , ration , division

For minimum curved surface area and given volume, the ration of the height and radius of base of a cone is :

Description : For minimum curved surface area and given volume, the ration of the height and radius of base of a cone is :

Last Answer : For minimum curved surface area and given volume, the ration of the height and radius of base of a cone is : A. ` ... : 1` C. `1 : 2` D. None of these

In the extraction of iron from haematitie, the charge used is haematite, coke and lime stone in the following weight ration

Description : In the extraction of iron from haematitie, the charge used is haematite, coke and lime stone in the following weight ration

Last Answer : In the extraction of iron from haematitie, the charge used is haematite, coke and lime stone in the following weight ration ... C. `8:1:4` D. `1:4:8`

What is Event ration of paralytic diaphragm?

Description : What is Event ration of paralytic diaphragm?

Last Answer : Need answer

What was the name of the man who helped Corrie get the ration cards?

Description : What was the name of the man who helped Corrie get the ration cards?

Last Answer : Feel Free to Answer

How many ration shops in India?

Description : How many ration shops in India?

Last Answer : What is the answer ?

What does ration mean in hickory toothpick?

Description : What does ration mean in hickory toothpick?

Last Answer : Need answer

If the reducing equivalents enter from FAD in the respiratory chain, the phosphate.oxygen ration (P:O) is (A) 2 (B) 1 (C) 3 (D) 4

Description : If the reducing equivalents enter from FAD in the respiratory chain, the phosphate.oxygen ration (P:O) is (A) 2 (B) 1 (C) 3 (D) 4

Last Answer : Answer : A

A patient to be commenced on oral anticoagulant therapy for DVT would be treated with (a) Oral anticoagulant therapy with warfarin for a goal intenational normalized ration (INR) of 2–3 (b) Oral anticoagulant therapy with warfarin for a goal INR of 2.5–3.5 (c) Oral anticoagulant therapy with aspirin for a goal INR of 2–3

Description : A patient to be commenced on oral anticoagulant therapy for DVT would be treated with (a) Oral anticoagulant therapy with warfarin for a goal intenational normalized ration (INR) of 2-3 (b) Oral anticoagulant therapy ... of 2.5-3.5 (c) Oral anticoagulant therapy with aspirin for a goal INR of 2-3

Last Answer : Ans: A

The stoichiometric air fuel ration for petrol is 15:1 . What is the air fuel ratio required for maximum power? (a) 16:1 – 18:1 (b) 15:1 (c) 12:1 – 14:1 (d) 9:1 – 11:1

Description : The stoichiometric air fuel ration for petrol is 15:1 . What is the air fuel ratio required for maximum power? (a) 16:1 – 18:1 (b) 15:1 (c) 12:1 – 14:1 (d) 9:1 – 11:1

Last Answer : Ans :c

e-KYC is possible only for those who have _______ A. PAN Card B. Driving License C. Ration Card D. Aadhaar Number E. None of the Above

Description : e-KYC is possible only for those who have _______ A. PAN Card B. Driving License C. Ration Card D. Aadhaar Number E. None of the Above

Last Answer : D. Aadhaar Number Explanation: e-KYC is possible only for those who have Aadhaar numbers. While using e-KYC service, you have to authorise the Unique Identification Authority of India (UIDAI), ... data comprising name, age, gender, and photograph of the individual, electronically to the bank/BC.

What is the term for the ration of the radiation resistance of an antenna to the total resistance of the system? A. Effective radiated power B. Beamwidth C. Radiation conversion loss D. Antenna efficiency

Description : What is the term for the ration of the radiation resistance of an antenna to the total resistance of the system? A. Effective radiated power B. Beamwidth C. Radiation conversion loss D. Antenna efficiency

Last Answer : D. Antenna efficiency

Which of the following is and impedance matching ration of coax balun? A. 2:8 B. 1:2 C. 4:1 D. 2:1

Description : Which of the following is and impedance matching ration of coax balun? A. 2:8 B. 1:2 C. 4:1 D. 2:1

Last Answer : C. 4:1