A column is said to be of medium size if its slenderness ratio is between
(A) 20 and 32
(B) 32 and 120
(C) 120 and 160
(D) 160 and 180

1 Answer

Answer :

(B) 32 and 120

Related questions

Description : A column is said to be of medium size if its slenderness ratio is between (a) 20 and 32 (b) 32 and 120 (c) 120 and 160 (d) 160 and 180

Last Answer : (b) 32 and 120

Description : A steel column is a medium column when the slenderness ratio is (a) >120 (b) 30 (d) None

Last Answer : (c) >30

Description : A column whose slenderness ratio is greater than 120 is known as (a) Short column (b) Long column (c) Medium column (d) Composite column

Last Answer : (b) Long column

Description : If the slenderness ratio for a column is 100, then it is said to be a __________ column. (a) Long (b) medium (c)short (d) big

Last Answer : (a) Long

Description : If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is (A) 40 (B) 45 (C) 50 (D) 55

Last Answer : Answer: Option D

Description : Nesha scored 120 out of 150 in English, 120 out of 180 in mathematics and 160 out of 200 in Science. Find Nesha’s score as percentage: (i) in Mathematics (ii) in all the three subjects (on the whole). a) 66 2/3, 78 22/51 b) 71 23/5, 45 7/31 c) 54 13/33, 82 3/4 d) 60 3/4, 76 32/41 

Last Answer :  Answer: A (i) Percentage scored in Mathematics = 120/180 100  = 12000/180  =1200/18  = 66 2 /3 % (ii) Total maximum of all the three subjects = 150 + 160 + 200 = 510 and Total score in the ... percentage on the whole = (400/510 100)  = (40000/510)  = 4000/51  = 78 22/51 %

Description : A Column is said to be short, when the slenderness ratio is [ A ] Less than 6 [ B ] Less than 12 [ C ] Less than 18 [ D ] None of the above

Last Answer : [ B ] Less than 12

Description : A steel column is a long column when the slenderness ratio is (a) >120 (b) 30 (d) None

Last Answer : (a) >120

Description : A steel column is a short column when the slenderness ratio is (a) >120 (b) 30 (d) None

Last Answer : (b)

Description : The ratio of the effective length of a column and minimum radius of gyration of its cross-sectional area, is known (A) Buckling factor (B) Slenderness ratio (C) Crippling factor (D) None of these

Last Answer : (B) Slenderness ratio

Description : An R.C.C. column is treated as long if its slenderness ratio is greater than (A) 30 (B) 35 (C) 40 (D) 50

Last Answer : Answer: Option D

Description : An R.C.C. column is treated as short column if its slenderness ratio is less than (A) 30 (B) 35 (C) 40 (D) 50

Last Answer : Answer: Option D

Description : When a column is supported throughout its length either by masonry walls or by construction on all the sides, then its slenderness ratio is (a) Infinite (b) Zero (c ) Reasonably high (d) Low

Last Answer : (b) Zero

Description : Slenderness ratio of a long column, is  (A) Area of cross-section divided by radius of gyration  (B) Area of cross-section divided by least radius of gyration  (C) Radius of gyration divided by area of cross-section  (D) Length of column divided by least radius of gyration 

Last Answer : (D) Length of column divided by least radius of gyration 

Description : The slenderness ratio of a vertical column of square cross- section of 10 cm side and 500 cm long, is (A) 117.2 (B) 17.3 (C) 173.2 (D) 137.2

Last Answer : (C) 173.2

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm  length, is  (A) 200  (B) 240  (C) 360  (D) 416

Last Answer : (D) 416

Description : According to IS: 4561978, minimum slenderness ratio for a short column is (A) Less than 12 (B) Less than 18 (C) Between 18 and 24 (D) More than 24

Last Answer : Answer: Option A

Description : According to IS 456, minimum slenderness ratio for a short concrete column is (a) Less than 12 (b) Between 12 and 18 (c) Between 18 and 24 (d) More than 24

Last Answer : (a) Less than 12

Description : The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending ... at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Last Answer : (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Description : According to IS:456-2000, the minimum slenderness ratio for a short column is [ A ] Less than 12 [ B ] Between 12 and 18 [ C ] Less than 18 [ D ] Must be greater than 18

Last Answer : [ A ] Less than 12

Description : Slenderness ratio of the column is the ratio of [ A ] the effective length to width of column [ B ] the effective length to depth of column [ C ] the effective length to least lateral design [ D ] none of the above

Last Answer : [ C ] the effective length to least lateral design

Description : The blood cholesterol level in 100ml of blood in a normal person varies between (1) 150 and 200 mg (2) 120 and 200 mg (3) 100 and 180 mg (4) 80 and 160 mg

Last Answer : (1) 150 and 200 mg Explanation: Cholesterol is defined as a waxy alcohol, fat-like substance that occurs naturally in all areas of the human body. Cholesterol is measured in milligrams per 100 ... to be normal blood cholesterol; 200-239 mg/dL borderlinehigh; and > 240 mg/dl high cholesterol.

Description : The subcritical steam generators operate between a pressure ranges of? (rra) 120-160 bar (rrb) 100-110 bar ( c) 130-180 bar (rrd) 140- 200 bar

Last Answer : ( c) 130-180 bar

Description : What is the pressure range between which Lamont boiler operator ? a. 80-120 bar b. 120-160 bar c. 180-360 bar d. 450-560 bar

Last Answer : b. 120-160 bar

Description : 24+(72 ÷ 48×8+14) × 36 ÷ (3×4) + 36 ÷ 3 ×4 a) 120 b) 140 c) 160 d) 180 e) None of these

Last Answer : 72÷48×8+14 = (72/48) × 8 + 14 = (3/2) × 8 + 14 = 12 +14 = 26 24 + (72 ÷ 48 × 8 + 14) ×36 ÷ (3 × 4) + 36 ÷ 3 × 4 = 24 + 26 × 36÷12 + 36 ÷ 3 × 4 = 24 + 26 × 3 + 12 × 4 = 24 + 78 + 48 = 150 Answer: e)

Description : Two train travel in opposite directions at 36 kmph and 45 kmph and a man sitting in slower train passes the faster train in 8 seconds. Then length of the faster train is: A.120 m B.140 m C.160 m D.180 m E.None of these

Last Answer : Answer – D (180 m) Explanation – When OPP. direction-PLUS Relative speed = (36 + 45) km/hr = [81 x 5/18] m/sec = [45/2] m/sec. Length of train = [45/2 x 8] m = 180 m.

Description : The average life span of red blood corpuscles is about (1) 100 - 200 days (2) 100 - 120 days (3) 160 - 180 days (4) 150 - 200 days

Last Answer : 100 - 120 days

Description : The blood cholesterol level in 100 ml of blood in a normal person varies between— (1) 150 and 200 mg (2) 120 and 200 mg (3) 100 and 180 mg (4) 80 and 160 mg

Last Answer :  150 and 200 mg

Description : The ratio of the effective length of a column and minimum radius of gyration of its cross sectionalarea, is known (a) Buckling factor (b) Slenderness ratio (c) Crippling factor (d) None of these

Last Answer : (b) Slenderness ratio

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 240 (b) 416 (c) 360 (d) 400

Last Answer : (b) 416

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 200 (b) 240 (c) 360 (d) 416

Last Answer : (d) 416

Description : Euler’s formula is not valid for mild steel column when slenderness ratio is (a) More than 100 (b) Less than 100 (c) Less than 80 (d)More than 80

Last Answer : (c) Less than 80

Description : The slenderness ratio is the ratio of (a) Length of column to least radius of gyration (b) Moment of inertia to area of cross-section (c) Area of cross-section to moment of inertia (d) Least radius of gyration to length of the column

Last Answer : (a) Length of column to least radius of gyration

Description : The slenderness ratio for masonry walls should not be more than (A) 10 (B) 20 (C) 30 (D) 40

Last Answer : Answer: Option B

Description : Maximum slenderness ratio for load-bearing masonry wall in cement mortar, as per IS code, shall not exceed. (a) 13 (b) 20 (c) 27 (d) 30

Last Answer : (c) 27

Description : Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B ... What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Last Answer : b. 40

Description : The width of seed drill with 9 tynes, each spaced at 20 cm is a) 160 cm b) 180 cm c) 200 cm d) 220 cm

Last Answer : ans b

Description : The pipe wall thickness is minimum for a pipe of given nominal size having schedule number (A) 160 (B) 120 (C) 80 (D) 40

Last Answer : (D) 40

Description : A stratum of clay 2 m thick will get consolidated 80% in 10 years. For the 80% consolidation of 8 m thick stratum of the same clay, the time required is (A) 100 years (B) 120 years (C) 140 years (D) 160 years

Last Answer : Answer: Option D

Description : Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, ... ? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Last Answer : b) 2 and 3 only

Description : Find the vector potential when the field intensity 60x 2 varies from (0,0,0) to (1,0,0). a) 120 b) -20 c) -180 d) 60

Last Answer : b) -20

Description : Find the force on a conductor of length 12m and magnetic flux density 20 units when a current of 0.5A is flowing through it. a) 60 b) 120 c) 180 d) 200

Last Answer : b) 120

Description : What is considered to be the safe limit of daily alcohol consumption by an adult man in the absence of contraindications and interacting drugs: A. 20-40 ml of whisky B. 50-100 ml of whisky C. 120-180 ml of whisky D. 200-300 ml of whisky

Last Answer : B. 50-100 ml of whisky

Description : A sample of metal weighs 219 gms in air, 180 gms in water, 120 gms in an unknown fluid. Then  which is correct statement about density of metal  (A) Density of metal can't be determined  (B) ... as water  (C) Metal will float in water  (D) Metal is twice as dense as unknown fluid 

Last Answer : (A) Density of metal can't be determined 

Description : Weight of one cotton bale is (A)170 Kg (B) 160 Kg (C) 180 Kg (D) 190 Kg

Last Answer : (A)170 Kg

Description : How much area could be covered for giving one irrigation of 3" depth by a pumpset of one cusec output in the operation of 600 hours, if the water conveyance efficiency is 80 per cent ? (A) 180 acres (B) 320 acres (C) 240 acres (D) 160 acres (E) None of these

Last Answer : (C) 240 acres

Description : How much calories (cal) may be obtained from 100 gram chicken egg ? (A) 175 cal (B) 180 cal (C) 160 cal (D) 130 cal

Last Answer : (C) 160 cal

Description : pulse rate of chicken?a 70-80/min b 40-80/ min c 130-160/min d 180-195/min

Last Answer : c 130-160/min

Description : How many maximum character are allowed in sms marketing? A. 150 character B. 160 character C. 170 character D. 180 character

Last Answer : B. 160 character

Description : The volume of a gas under standard atmospheric pressure & 76 cmHg is 200m³. What is the volume when pressure is 80 cmHg if the temperature is unchanged?  a) 180 in³  b) 170 in³  c) 160 in³  d) 190 in³ Formula: P2V2 = P1V1

Last Answer : 190 in³