Description : A column is said to be of medium size if its slenderness ratio is between (A) 20 and 32 (B) 32 and 120 (C) 120 and 160 (D) 160 and 180
Last Answer : (B) 32 and 120
Description : A steel column is a medium column when the slenderness ratio is (a) >120 (b) 30 (d) None
Last Answer : (c) >30
Description : A column whose slenderness ratio is greater than 120 is known as (a) Short column (b) Long column (c) Medium column (d) Composite column
Last Answer : (b) Long column
Description : If the slenderness ratio for a column is 100, then it is said to be a __________ column. (a) Long (b) medium (c)short (d) big
Last Answer : (a) Long
Description : A steel column is a long column when the slenderness ratio is (a) >120 (b) 30 (d) None
Last Answer : (a) >120
Description : A steel column is a short column when the slenderness ratio is (a) >120 (b) 30 (d) None
Last Answer : (b)
Description : The ratio of the effective length of a column and minimum radius of gyration of its cross sectionalarea, is known (a) Buckling factor (b) Slenderness ratio (c) Crippling factor (d) None of these
Last Answer : (b) Slenderness ratio
Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 240 (b) 416 (c) 360 (d) 400
Last Answer : (b) 416
Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 200 (b) 240 (c) 360 (d) 416
Last Answer : (d) 416
Description : Euler’s formula is not valid for mild steel column when slenderness ratio is (a) More than 100 (b) Less than 100 (c) Less than 80 (d)More than 80
Last Answer : (c) Less than 80
Description : The slenderness ratio is the ratio of (a) Length of column to least radius of gyration (b) Moment of inertia to area of cross-section (c) Area of cross-section to moment of inertia (d) Least radius of gyration to length of the column
Last Answer : (a) Length of column to least radius of gyration
Description : Nesha scored 120 out of 150 in English, 120 out of 180 in mathematics and 160 out of 200 in Science. Find Nesha’s score as percentage: (i) in Mathematics (ii) in all the three subjects (on the whole). a) 66 2/3, 78 22/51 b) 71 23/5, 45 7/31 c) 54 13/33, 82 3/4 d) 60 3/4, 76 32/41
Last Answer : Answer: A (i) Percentage scored in Mathematics = 120/180 100 = 12000/180 =1200/18 = 66 2 /3 % (ii) Total maximum of all the three subjects = 150 + 160 + 200 = 510 and Total score in the ... percentage on the whole = (400/510 100) = (40000/510) = 4000/51 = 78 22/51 %
Description : Rankine’s formula is generally used when slenderness ratio lies in between (a) 0-60 (b) 0-80 (c) 0-100 (d) Any value
Last Answer : (d) Any value
Description : If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is (A) 40 (B) 45 (C) 50 (D) 55
Last Answer : Answer: Option D
Description : A column is said to be a short column, when (a) its length is very small (b) its cross-sectional area is small (c) the ratio of its length to the least radhis of gyration is less than 80 (d) the ratio of its length to the least radius of gyration is more than 80
Last Answer : (c) the ratio of its length to the least radhis of gyration is less than 80
Description : A Column is said to be short, when the slenderness ratio is [ A ] Less than 6 [ B ] Less than 12 [ C ] Less than 18 [ D ] None of the above
Last Answer : [ B ] Less than 12
Description : The blood cholesterol level in 100ml of blood in a normal person varies between (1) 150 and 200 mg (2) 120 and 200 mg (3) 100 and 180 mg (4) 80 and 160 mg
Last Answer : (1) 150 and 200 mg Explanation: Cholesterol is defined as a waxy alcohol, fat-like substance that occurs naturally in all areas of the human body. Cholesterol is measured in milligrams per 100 ... to be normal blood cholesterol; 200-239 mg/dL borderlinehigh; and > 240 mg/dl high cholesterol.
Description : The subcritical steam generators operate between a pressure ranges of? (rra) 120-160 bar (rrb) 100-110 bar ( c) 130-180 bar (rrd) 140- 200 bar
Last Answer : ( c) 130-180 bar
Description : What is the pressure range between which Lamont boiler operator ? a. 80-120 bar b. 120-160 bar c. 180-360 bar d. 450-560 bar
Last Answer : b. 120-160 bar
Description : 24+(72 ÷ 48×8+14) × 36 ÷ (3×4) + 36 ÷ 3 ×4 a) 120 b) 140 c) 160 d) 180 e) None of these
Last Answer : 72÷48×8+14 = (72/48) × 8 + 14 = (3/2) × 8 + 14 = 12 +14 = 26 24 + (72 ÷ 48 × 8 + 14) ×36 ÷ (3 × 4) + 36 ÷ 3 × 4 = 24 + 26 × 36÷12 + 36 ÷ 3 × 4 = 24 + 26 × 3 + 12 × 4 = 24 + 78 + 48 = 150 Answer: e)
Description : Two train travel in opposite directions at 36 kmph and 45 kmph and a man sitting in slower train passes the faster train in 8 seconds. Then length of the faster train is: A.120 m B.140 m C.160 m D.180 m E.None of these
Last Answer : Answer – D (180 m) Explanation – When OPP. direction-PLUS Relative speed = (36 + 45) km/hr = [81 x 5/18] m/sec = [45/2] m/sec. Length of train = [45/2 x 8] m = 180 m.
Description : The average life span of red blood corpuscles is about (1) 100 - 200 days (2) 100 - 120 days (3) 160 - 180 days (4) 150 - 200 days
Last Answer : 100 - 120 days
Description : The blood cholesterol level in 100 ml of blood in a normal person varies between— (1) 150 and 200 mg (2) 120 and 200 mg (3) 100 and 180 mg (4) 80 and 160 mg
Last Answer : 150 and 200 mg
Description : Pure Buckling occurs in a (a) Short column (b) Medium Column (c) Long column (d) None
Last Answer : (c) Long column
Description : The Rankine formula holds good for (a) Short column (b) Long column (c) Medium column (d) Both short and long column
Last Answer : (d) Both short and long column
Description : A column that fails due to direct stress is called (a) Short column (b) Long column (c) Medium column (d) Slender column
Last Answer : (a) Short column
Description : The ratio of the effective length of a column and minimum radius of gyration of its cross-sectional area, is known (A) Buckling factor (B) Slenderness ratio (C) Crippling factor (D) None of these
Last Answer : (B) Slenderness ratio
Description : An R.C.C. column is treated as long if its slenderness ratio is greater than (A) 30 (B) 35 (C) 40 (D) 50
Description : An R.C.C. column is treated as short column if its slenderness ratio is less than (A) 30 (B) 35 (C) 40 (D) 50
Description : When a column is supported throughout its length either by masonry walls or by construction on all the sides, then its slenderness ratio is (a) Infinite (b) Zero (c ) Reasonably high (d) Low
Last Answer : (b) Zero
Description : What is the shear stress acting on the outer surface of a hollow shaft subjected to a torque of 100 Nm?(The inner and outer diameter of the shaft is 15 mm and 30 mm respectively.) a. 50.26 N/mm2 b. 40.24 N/mm2 c. 20.120 N/mm2 d. 8.74 N/mm2
Last Answer : c. 20.120 N/mm2
Description : Slenderness ratio of a long column, is (A) Area of cross-section divided by radius of gyration (B) Area of cross-section divided by least radius of gyration (C) Radius of gyration divided by area of cross-section (D) Length of column divided by least radius of gyration
Last Answer : (D) Length of column divided by least radius of gyration
Description : The slenderness ratio of a vertical column of square cross- section of 10 cm side and 500 cm long, is (A) 117.2 (B) 17.3 (C) 173.2 (D) 137.2
Last Answer : (C) 173.2
Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (A) 200 (B) 240 (C) 360 (D) 416
Last Answer : (D) 416
Description : According to IS: 4561978, minimum slenderness ratio for a short column is (A) Less than 12 (B) Less than 18 (C) Between 18 and 24 (D) More than 24
Last Answer : Answer: Option A
Description : According to IS 456, minimum slenderness ratio for a short concrete column is (a) Less than 12 (b) Between 12 and 18 (c) Between 18 and 24 (d) More than 24
Last Answer : (a) Less than 12
Description : The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending ... at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.
Last Answer : (d) Compressive strength based on slenderness ratio and gross cross-sectional area.
Description : According to IS:456-2000, the minimum slenderness ratio for a short column is [ A ] Less than 12 [ B ] Between 12 and 18 [ C ] Less than 18 [ D ] Must be greater than 18
Last Answer : [ A ] Less than 12
Description : Slenderness ratio of the column is the ratio of [ A ] the effective length to width of column [ B ] the effective length to depth of column [ C ] the effective length to least lateral design [ D ] none of the above
Last Answer : [ C ] the effective length to least lateral design
Description : Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B ... What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320
Last Answer : b. 40
Description : A thick cylinder is subjected to an internal pressure of 60 MPa. If the hoop stress on the outer surface is 150 MPa, then the hoop stress on the internal surface is a) 105 MPa b) 180 MPa c) 210 MPa d) 135 MPa.
Last Answer : c) 210 MPa
Description : The width of seed drill with 9 tynes, each spaced at 20 cm is a) 160 cm b) 180 cm c) 200 cm d) 220 cm
Last Answer : ans b
Description : Vessel is said to be thin if a. D/t =20 b. D/t=10 c. D/t >20 d. D/t >10
Last Answer : c. D/t >20
Description : In a four stroke I.C engine completing 3000rpm the natural frequency of vibration of the exhaust valve should be a. 1200 Hz b. 1000 Hz c. 600 Hz d. 120 Hz
Last Answer : b. 1000 Hz
Description : A circular shaft subjected to torsion undergoes a twist of 10in a length of 120 cm. If the maximum shear stress induced is limited to 1000 kg/cm2and if modulus of rigidity G = 0.8 x 106then the radius of the shaft should be (a) p/8 (b) p/27 (c) 18/p (d) 27/p
Last Answer : (d) 27/p
Description : The pipe wall thickness is minimum for a pipe of given nominal size having schedule number (A) 160 (B) 120 (C) 80 (D) 40
Last Answer : (D) 40
Description : The slenderness ratio for masonry walls should not be more than (A) 10 (B) 20 (C) 30 (D) 40
Last Answer : Answer: Option B
Description : Maximum slenderness ratio for load-bearing masonry wall in cement mortar, as per IS code, shall not exceed. (a) 13 (b) 20 (c) 27 (d) 30
Last Answer : (c) 27
Description : A vertical column has two moments of inertia (i.e. Ixx and Iyy ). The column will tend to buckle in the direction of the (a) axis of load (b) perpendicular to the axis of load (c) maximum moment of inertia (d) minimum moment of inertia
Last Answer : (d) minimum moment of inertia
Description : According to Euler’s column theory, the crippling load for a column of length (l) fixed at both ends is __________ the crippling load for a similar column hinged at both ends. (a) equal to (b) two times (c) four times (d) eight times
Last Answer : (c) four times