Why are feed water heaters are used?

Why are feed water heaters are used?
by

1 Answer

Answer :

Regenerative Feedwater heaters are employed in steam power plants to improve the cycle efficiency. Also it increases the steam flow rate and reduces the steam flow to the condenser. They raise the temperature of the feed water before it enters the economizer
by

Related questions

List the types of super heaters:

Description : List the types of super heaters:

Last Answer : 1. Radiant super heater- absorb heat by radiation 2. Convention super heater-absorb heat via a fluid 3. Separately fixed super heaters- it is totally separated from the boiler

What consists of feed water and steam flow circuit in steam power?

Description : What consists of feed water and steam flow circuit in steam power?

Last Answer : The feed water and steam flow circuit consists of feed pump, economizer boiler drum super heater, turbine and condenser.

What consists of cooling water circuit and coal & ash circuit in steam power plant?

Description : What consists of cooling water circuit and coal & ash circuit in steam power plant?

Last Answer : The cooling water circuit consists of a pump, condenser and cooling tower. The coal and ash circuit consists of coal delivery, preparation of coal, handling of coal to the boiler furnace, ash handling and ash storage.

What type of cooling is provided for Generator in power plant?

Description : What type of cooling is provided for Generator in power plant?

Last Answer : Hydrogen gas cooling is employed for large size generators because of better heat carrying ability of the hydrogen. Hydrogen cooling is provided for rotors and core of the generator. Water cooling is provided for the stator of the alternator.

What are different types of circuit breakers employed in thermal power plant?

Description : What are different types of circuit breakers employed in thermal power plant?

Last Answer : For low voltage operation 415/220V vacuum circuit breakers or air break circuit breakers are employed. For voltage ratings about 6.6kV and beyond SF6 circuit breakers are employed.

How Generator Transformer is cooled in Thermal Power Plant?

Description : How Generator Transformer is cooled in Thermal Power Plant?

Last Answer : MVA power rating of the Generator Transformer will be equal to the alternator. Hence lot of heat will be generated while generator transformer is under operation. Oil Forced Air Forced (OFAF) type of cooling is employed for generator transformer

What are the different Generator Protections employed in Thermal Power Plants?

Description : What are the different Generator Protections employed in Thermal Power Plants?

Last Answer : Faults in the windings, Over load protection, Over heating of windings or bearings, Over speed protection, Loss of Excitation protection, Motoring operation protection, Inadvertent energisation ... , out of step operation protection, sub-synchronous oscillations protection and earth fault protection

What are the major electric systems in Thermal Power Plant?

Description : What are the major electric systems in Thermal Power Plant?

Last Answer : Major electrical equipment in thermal power plant are Turbine Generator Exciter System Generator Protection System Generator Transformer HT/LT switch gear Electrical Switch-yard

On what factors efficiency (thermal) of the steam plant depends?

Description : On what factors efficiency (thermal) of the steam plant depends?

Last Answer : Efficiency of the thermal plant depends on three factors, they are pressure of steam entering the turbine temperature of the steam entering the turbine pressure in the condenser Thermal efficiency ... as low as possible. Thermal efficiency also increases by reheating the steam between turbine stages

Why the Thermal efficiency of the steam power plant is quite low?

Description : Why the Thermal efficiency of the steam power plant is quite low?

Last Answer : In Steam power station, more than 50% of the total heat of combustion is lost as heat rejected to the condenser and the loss is unavoidable as the heat energy cannot be converted in to mechanical ... lowest temperature. This is the reason that the thermal efficiency of the power plant is quite low.

What is the overall efficiency of the Thermal Power Plant or Steam Power Plant?

Description : What is the overall efficiency of the Thermal Power Plant or Steam Power Plant?

Last Answer : Overall efficiency of the system is defined as the ratio of heat equivalent of electrical output to the heat of combustion. Generally Overall efficiency of the steam plant will always be ... by multiplying the thermal efficiency of the plant with efficiency of the generator (electrical efficiency)

What is the Thermal efficiency of steam power plant?

Description : What is the Thermal efficiency of steam power plant?

Last Answer : Thermal efficiency of steam power plant is defined as the ratio of heat equivalent of mechanical energy transmitted to the turbine shaft to the heat of combustion. Generally Thermal efficiency of the steam power plant will be in the range of 30-35%

Steam power plant works on which cycle?

Description : Steam power plant works on which cycle?

Last Answer : Steam power plant works on the principle of Rankine Cycle

What are the main circuits in the Thermal Power Plant?

Description : What are the main circuits in the Thermal Power Plant?

Last Answer : Thermal Power plant consists of four main circuits, they are: Feed water and steam flow circuit Coal and ash circuit Air and gas circuit Cooling water circuit

Why cooling towers require in the Steam power plant ?

Description : Why cooling towers require in the Steam power plant ?

Last Answer : Cooling towers cool the warm water discharged from the condenser and feed the cooled water back to the condenser. There are two types of cooling methods provided in the cooling towers, they can be either ... finned tubes over which cooling air is passed. Heat is rejected to air as water is cooled

What is the purpose of deaerator in steam power plant?

Description : What is the purpose of deaerator in steam power plant?

Last Answer : The presence of dissolved gases like oxygen and carbon dioxide in water makes the water corrosive, as they react with metal and forms iron oxide. The solubility of the gases in the water ... deaerator by heating the feed water to saturation temperature through the bled steam from the turbine.

Why Thermal Power Plants are always situated by the side of rivers or lakes?

Description : Why Thermal Power Plants are always situated by the side of rivers or lakes?

Last Answer : Thermal Power Plants are situated close to the rivers or lakes because to meet the large quantity of the water requirement. Water is required in the steam power plants steam in the boiler for cooling purposes such as in condensers as carrying medium such as in disposal of ash for drinking purpose

Write about classification of draught?

Description : Write about classification of draught?

Last Answer : Draught is classified as 1. Natural draught 2. Artificial draught

Define draught, what is the use of draught in thermal power plants?

Description : Define draught, what is the use of draught in thermal power plants?

Last Answer : Draught is defined as a small pressure difference required between the fuel bed (furnace) and outside air to maintain constant flow of air and to discharge the gases through chimney to the atmosphere. ... combustion products through the system. · To remove burnt products from the system

What is the working principle of Cooling Towers?

Description : What is the working principle of Cooling Towers?

Last Answer : The hot water is sprayed from the top of the tower, while the air is made to flow from the bottom of the tower to the top. This air cools the hot water in the cooling tower. Air vaporises ... and leaves at the top of the tower and cooled water leaves at the bottom and recirculated to the condenser.

What are different types of Steam boilers used in Thermal Power Plants?

Description : What are different types of Steam boilers used in Thermal Power Plants?

Last Answer : Different type of boiler used in thermal power plants are: Fire tube boiler Water tube boiler Natural Circulation boiler Forced Circulation boiler Once through boiler

What is meant by cooling Towers?

Description : What is meant by cooling Towers?

Last Answer : It is a tower or building like device in which atmospheric air circulates in direct or indirect contact with warmer water and water is thereby cooled. Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid

What consists of air and flue gas circuit?

Description : What consists of air and flue gas circuit?

Last Answer : Air and flue gas circuit consists of forced draught fan, air-pre-heater, boiler, furnace, super heater, economizer, dust collector, induced draught fan and chimney.

Name the four major circuits in steam power plant.

Description : Name the four major circuits in steam power plant.

Last Answer : • Coal and ash circuit • Air and flue gas circuit • Feed water and steam circuit • Cooling water circuit

What is the function of Air preheater?

Description : What is the function of Air preheater?

Last Answer : Air pre heater is used to transfer heat from the flue gases to the air before it passes into the furnace for combustion thereby increasing the thermal efficiency of the process.

What is an Economizer?

Description : What is an Economizer?

Last Answer : An economizer is a mechanical device which is used as a heat exchanger by preheating water by recovering residual heat from the flue gases in thermal power plant.

What is superheater?

Description : What is superheater?

Last Answer : A superheater is a device used to convert saturated steam or wet steam into dry steam

Why the preparation of coal is necessary?

Description : Why the preparation of coal is necessary?

Last Answer : The coal from coal nines cannot be directly fed into the furnace. Proper preparation of coal should be done before feeding the coal to the furnace. In the coal preparation, the coal passes through the different equipments like 1.Crushers 2. Sizers 3. Driers and Magnetic Separators.

Explain the working of thermal power plant.

Description : Explain the working of thermal power plant.

Last Answer : It uses coal as the primary fuel to boil the water available to superheated steam for driving the steam turbine. The steam turbine is then mechanically coupled to an alternator rotor, the rotation of which results in the generation of electric power.

List the factors to be considered while choosing a site for steam power station:

Description : List the factors to be considered while choosing a site for steam power station:

Last Answer : 1.Supply of fuel 2.Availability of water 3.Transportation facilities 4.Cost and type of land 5.Nearness to load centres 6.Distance from populated area

Explain the differences between the two types of feed water heaters.

Description : Explain the differences between the two types of feed water heaters. 

Last Answer : a. Open type: In which bleed steam and condensed water are mixes directly and there is also dearation of steam.  b. Closed type (shell type): It has tubes and shell. The water passes through the tubes and steam passes through shell. The heat exchange takes placcce through the metal tubes. 

The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual magnetism C. kept warm by using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Description : The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual ... using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Last Answer : Answer: C

On large generators, space heaters are used to ____________. A. keep the machine at ambient tmperature of the machinery space B. maintain rotor and stator winding temperatures above the dew point to prevent the formation of condensation C. prevent condensation in the lube oil D. prevent electrolysis due to condensation in the bearings

Description : On large generators, space heaters are used to ____________. A. keep the machine at ambient tmperature of the machinery space B. maintain rotor and stator winding temperatures above the dew point ... C. prevent condensation in the lube oil D. prevent electrolysis due to condensation in the bearings

Last Answer : Answer: B

In the illustration, when the energy saver switch is in the 'lo' position, the _________. EL-0043 A. mullion and frz flange heaters will not energize B. mullion heater and refrig light will not energize C. mullion, frz flange, defrost heaters will not energize D. range of the freezer temperature control is increased causing the cut-in temp to become warmer

Description : In the illustration, when the energy saver switch is in the 'lo' position, the _________. EL-0043 A. mullion and frz flange heaters will not energize B. mullion heater and refrig light will ... energize D. range of the freezer temperature control is increased causing the cut-in temp to become warmer

Last Answer : Answer: A

Some large A.C. motors are equipped with with heaters. These could be ___________. I. resistance heaters bolted directly to the frame II. low voltage windings embedded in the motor windings A. I only B. II only C. either I or II D. neither I or II

Description : Some large A.C. motors are equipped with with heaters. These could be ___________. I. resistance heaters bolted directly to the frame II. low voltage windings embedded in the motor windings A. I only B. II only C. either I or II D. neither I or II

Last Answer : Answer: C

In the illustration, when the energy saver switch is in the 'lo' position _________. EL-0042 A. the mullion and frz flange heaters will not energize B. the mullion heater and refrig light will not energize C. the mullion, frz flange, defrost heaters will not energize D. the range of the freezer temperature control is increased causing the cut-in temp to become warmer

Description : In the illustration, when the energy saver switch is in the 'lo' position _________. EL-0042 A. the mullion and frz flange heaters will not energize B. the mullion heater and refrig light will ... D. the range of the freezer temperature control is increased causing the cut-in temp to become warmer

Last Answer : Answer: A

Which of the following procedures should be used to maintain a large electric motor during periods of inactivity? A. A thin layer of air-drying varnish should be applied on the windings. B. Compressed air should be blown over areas where dust is deposited. C. Spraying a solvent periodically to remove carbon dust. D. Space heaters should be used to prevent condensation of moisture.

Description : Which of the following procedures should be used to maintain a large electric motor during periods of inactivity? A. A thin layer of air-drying varnish should be applied on the windings. B. ... periodically to remove carbon dust. D. Space heaters should be used to prevent condensation of moisture.

Last Answer : Answer: D

The heaters for the winch circuit shown in the illustration are powered from _____________. EL-0102 A. a separate source B. the winch main bus C. the master switch power circuit D. the contactor control circuit

Description : The heaters for the winch circuit shown in the illustration are powered from _____________. EL-0102 A. a separate source B. the winch main bus C. the master switch power circuit D. the contactor control circuit

Last Answer : Answer: A

Motor controllers are seldom troubled by grounds because ________________. A. cabinet heaters always keep internal components dry B. special insulation is used on wire for vital circuits C. shock mounts on controller panels greatly reduce vibration D. contactors and relays are mounted on nonconducting panels

Description : Motor controllers are seldom troubled by grounds because ________________. A. cabinet heaters always keep internal components dry B. special insulation is used on wire for vital circuits C. ... on controller panels greatly reduce vibration D. contactors and relays are mounted on nonconducting panels

Last Answer : Answer: D

In addition to testing the calibration of a circuit breaker, maintenance should include all of the following EXCEPT ______________. A. changing out of magnetic elements and thermal heaters yearly B. checking for corrosion, accumulation of dirt and thermal fatigue C. inspecting for loose or missing parts D. making sure foreign matter does not block tripping element

Description : In addition to testing the calibration of a circuit breaker, maintenance should include all of the following EXCEPT ______________. A. changing out of magnetic elements and thermal heaters yearly B. ... for loose or missing parts D. making sure foreign matter does not block tripping element

Last Answer : Answer: A

Which of the listed devices may be installed on a large diesel-electric alternating current propulsion generator? A. Temperature detector coils inserted in the stator slots for measuring stator temperature. B. A CO2 fire extinguishing system. C. Electric space heaters to prevent condensation of moisture. D. All of the above.

Description : Which of the listed devices may be installed on a large diesel-electric alternating current propulsion generator? A. Temperature detector coils inserted in the stator slots for measuring stator temperature. B. ... . C. Electric space heaters to prevent condensation of moisture. D. All of the above.

Last Answer : Answer: D

Electric strip heaters are used in motor controllers to _____________. A. prevent freezing of movable contacts B. keep the components at their design ambient temperature C. prevent condensation of moisture D. minimize resistance in internal circuits

Description : Electric strip heaters are used in motor controllers to _____________. A. prevent freezing of movable contacts B. keep the components at their design ambient temperature C. prevent condensation of moisture D. minimize resistance in internal circuits

Last Answer : Answer: C

Moisture damage, as a result of condensation occurring inside of the cargo winch master switches, can be reduced by __________________. A. installing a light bulb in the pedestal stand B. coating the switch box internals with epoxy sealer C. venting the switch box regularly D. using strip heaters inside the switch box

Description : Moisture damage, as a result of condensation occurring inside of the cargo winch master switches, can be reduced by __________________. A. installing a light bulb in the pedestal stand B. coating the ... epoxy sealer C. venting the switch box regularly D. using strip heaters inside the switch box

Last Answer : Answer: D

Which of the listed devices may be installed on a large turbo-electric alternating current propulsion generator? A. Temperature detector coils inserted in the stator slots for measuring stator temperature. B. A CO2 fire extinguishing system. C. Electric space heaters to prevent condensation of moisture. D. All of the above.

Description : Which of the listed devices may be installed on a large turbo-electric alternating current propulsion generator? A. Temperature detector coils inserted in the stator slots for measuring stator temperature. B. A ... . C. Electric space heaters to prevent condensation of moisture. D. All of the above.

Last Answer : Answer: D

In MAPS Unit # 1 end-shield cooling system has got heaters. Why?

Description : In MAPS Unit # 1 end-shield cooling system has got heaters. Why?

Last Answer : Unit # 1 end-shield is made of nickel steel, which had a nil ductility temperature of -100°C while commissioning. After 30 years of operation this will rise to +32°C, because of radiation exposure. ... #2 this problem is not existed because in this unit end-shields are made up of stainless steel. 

Have you had any experience with tankless water heaters?

Description : Have you had any experience with tankless water heaters?

Last Answer : Yes, I had a gas tankless. It still needed electricity to heat water. If your electricity goes out you instantly have zero hot water, unlike a tank you can usually have warm water 2-3 days if ... sink or bathtub That basically give you instant hot at the location. Takes up less space than a tank.

How do water heaters work, and why not make them like electric tea kettles?

Description : How do water heaters work, and why not make them like electric tea kettles?

Last Answer : Electric hot water heaters have a heating element (usually coiled) that is powered on whenever the thermostat detects that the temp in the tank is below what has been set. Your electric kettle has, at ... the US because people like hot showers and the tankless heaters can't keep up with the demand.

Is it a law that the phone must ring while you're in the shower, and hot water heaters and furnaces must break down on Holiday long weekends?

Description : Is it a law that the phone must ring while you're in the shower, and hot water heaters and furnaces must break down on Holiday long weekends?

Last Answer : It’s a Laws of the Universe thing.

Should the government pay for or at least subsidize the installation of new hot water heaters?

Description : Should the government pay for or at least subsidize the installation of new hot water heaters?

Last Answer : answer:That is more on the last mile end of energy conservation of things. While it would make sense, it's also a costly undertaking. A water heater may only be $250 but how many millions ... only see someplace like the EU. We are too stuck in the 19th century to do something that progressive.

Instant hot water heaters?

Description : Instant hot water heaters?

Last Answer : We put one in recently….I have mixed feelings about it. It’s nice in reducing bills, but because we do not have a supplementary tank, it can take 30sec to a minute to heat. And the further the faucet is from the heater, it seems to take longer.