In star topology which device is preferable as a star device between switch and hub? Justify.

In star topology which device is preferable as a star device between switch and hub? Justify. 
by

1 Answer

Answer :

Switch in star Topology:

Switch is used as a central device to connect different nodes in star topology.

Switch is an intelligent device. When switch receives a data packet it reads destination address stored in the packet it reads destination address stored in the packet and send it to only that node whose destination address matches with the address contained in the data packet.

Diagram:

image

by

Related questions

In a................ topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Description : In a................ topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Last Answer : Mesh

Which of the following is/ are the drawbacks of Ring Topology? A) Failure of one computer, can affect the whole network B) Adding or removing the computers disturbs the network activity. C) If the central hub fails, the whole network fails to operate. D) Both of A and B

Description : Which of the following is/ are the drawbacks of Ring Topology? A) Failure of one computer, can affect the whole network B) Adding or removing the computers disturbs the network activity. C) If the central hub fails, the whole network fails to operate. D) Both of A and B

Last Answer : D) Both of A and B

If all devices are connected to a central hub, then topology is called

Description : If all devices are connected to a central hub, then topology is called

Last Answer : C) Star Topology

A simple cabling method, known as the..................topology allows about 30 computers on a maximum cable length of about 600 feet. A) Ring B) Bus C) Star D) Mesh

Description : A simple cabling method, known as the..................topology allows about 30 computers on a maximum cable length of about 600 feet. A) Ring B) Bus C) Star D) Mesh

Last Answer : Bus

Which of the following is the logical topology? A) Bus B) Tree C) Star D) Both A and B

Description : Which of the following is the logical topology? A) Bus B) Tree C) Star D) Both A and B

Last Answer : C) Star

What is the name of the network topology in which there are bi-directional links between each possible node? A) Ring B) Star C) Tree D) Mesh

Description : What is the name of the network topology in which there are bi-directional links between each possible node? A) Ring B) Star C) Tree D) Mesh

Last Answer : Mesh

What is the central device in star topology? a. STP serveb. Hub/switch c. PDC d. Router

Description : What is the central device in star topology? a. STP serve b. Hub/switch c. PDC d. Router

Last Answer : b. Hub/switch

Which of the following is correct about Star Topology: a) Data on a star network passes through the hub, swithc or concentrator before continuing to its destination. b) The hub, switch or concentrator manages and controls all functions of the network c) The star topology reduces the chance of network failure by connecting all of the systems to a central node. d) All of Above e) None of These

Description : Which of the following is correct about Star Topology: a) Data on a star network passes through the hub, swithc or concentrator before continuing to its destination. b) The hub, switch or concentrator manages and ... connecting all of the systems to a central node. d) All of Above e) None of These

Last Answer : d) All of Above

State whether the following is True or False. i) In bus topology, heavy Network traffic slows down the busspeed. ii) It is multipoint configuration. A) True, True B) True, False C) False, True D) False, False

Description : State whether the following is True or False. i) In bus topology, heavy Network traffic slows down the busspeed. ii) It is multipoint configuration. A) True, True B) True, False C) False, True D) False, False

Last Answer : A) True, True

It is desired to connect five computers that are joined at a single point called central node. i) Draw the setup. ii) Name the topology. iii) State two advantages and disadvantages of this topology.

Description : It is desired to connect five computers that are joined at a single point called central node. i) Draw the setup. ii) Name the topology. iii) State two advantages and disadvantages of this topology.

Last Answer : i. Setup:  ii. Name of topology: Star topology iii. Advantages of Star Topology 1) As compared to Bus topology it gives far much better performance, signals don't necessarily get ... as well number of nodes which can be added in such topology is depended on capacity of central device.

State two advantages of Mesh topology.

Description : State two advantages of Mesh topology.

Last Answer : Network Topology refers to layout of a network. Network topology specifically refers to the physical layout of the network especially the locations of the computers & how the cable is run ... to Point Connection: Point-to-point links make fault identification and fault isolation easy.

Discuss hybrid topology with suitable diagram.

Description : Discuss hybrid topology with suitable diagram. 

Last Answer : Discuss hybrid topology with suitable dig. Hybrid topology is one that uses two or more basic topologies together Fig.1 depicts this. In this case, the bus, star & ring topologies are used to ... many networks are quite complex but they can be reduced to some form of hybrid topology.

Give any four selection criteria for selecting network topology.

Description : Give any four selection criteria for selecting network topology.

Last Answer : Selection criteria for selecting network topology. 1. Size of the network & number of devices or nodes being connected. 2. Ease of configuration & installing. 3. The ease of adding new device in an ... hubs etc. 7. Costs involved. 8. Need of security. 9. Need of network administration. 

List any two disadvantages of bus topology.

Description : List any two disadvantages of bus topology. 

Last Answer : Disadvantages of bus topology. 1. Heavy network traffic slows down the bus speed .In bus topology only one computer can transmit & other have to wait till their turn comes & there ... connectors will cause reflections & bring down the whole network causing all network activity to stop.

Discuss the role of the HUB. Differentiate between Active Hub and Passive Hub.

Description : Discuss the role of the HUB. Differentiate between Active Hub and Passive Hub.

Last Answer : HUB: Hub is a connecting device; it is also known as multiport repeater. It is normally used for connecting stations in a physical star topology All networks require a central location to bring media segments ... . They are much expensive than passive hubs. 4. They are not much expensive.

State the functions of i. Repeater ii. Switch iii. Gateway iv. Bridges

Description : State the functions of i. Repeater ii. Switch iii. Gateway iv. Bridges

Last Answer : i) Repeater: Repeaters are used to take the distorted, weak and corrupt input signal and regenerate this signal at its output. It ensures that the signals are not distorted or weak before it ... and decides whether to forward or discard it. It sends packets between two networks of same type.

8............. was the first step in the evolution of Ethernet from a coaxial cable bus to hubmanaged, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Description : 8............. was the first step in the evolution of Ethernet from a coaxial cable bus to hubmanaged, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Last Answer : A) Star LAN

A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Description : A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Last Answer : C) Multiplexer

Which topology requires acentral controller or hub? A) Mesh B) Star C) Bus D) Ring

Description : Which topology requires acentral controller or hub? A) Mesh B) Star C) Bus D) Ring

Last Answer : Star

If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Description : If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Last Answer : C) Star Topology

Which network topology requires a central controller or hub? a) Star b) Mesh c) Ring d) Bus

Description : Which network topology requires a central controller or hub? a) Star b) Mesh c) Ring d) Bus

Last Answer : a) Star

Which topology (bus, ring, star, or tree) has a center hub interconnecting the equipments?

Description : Which topology (bus, ring, star, or tree) has a center hub interconnecting the equipments?

Last Answer : Star.

If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Description : If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Last Answer : C) Star Topology

A USB communication device that supports data encryption for secure wireless communication for notebook users is called a a) USB wireless network adapter b) wireless switch c) wireless hub d) router e) None of these

Description : A USB communication device that supports data encryption for secure wireless communication for notebook users is called a a) USB wireless network adapter b) wireless switch c) wireless hub d) router e) None of these

Last Answer : a) USB wireless network adapter

Derive an expression for delta to star transformation.

Description : Derive an expression for delta to star transformation. 

Last Answer : For delta network the resistance between the terminals 1 and 2 consists of R12 in parallel with  (R23+R31) Hence ,the resistance between the terminals 1 and 2 is In case of star network the ... equation( ii) from( i),we get Adding equations (iii) and( iv),we have 

In a star network each node (file server, workstations and peripherals) is connected to a central device called a _____: a) Bug b) Center c) Hub d) None of These

Description : In a star network each node (file server, workstations and peripherals) is connected to a central device called a _____: a) Bug b) Center c) Hub d) None of These

Last Answer : c) Hub

..................mode is used whenever either end of a security association is gateway. A) Tunnel B) Encapsulating C) Transport D) Gateway

Description : ..................mode is used whenever either end of a security association is gateway. A) Tunnel B) Encapsulating C) Transport D) Gateway

Last Answer : A) Tunnel

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, ... iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

State whether the following statement are true. i) An application-level gateway is often referred to as a proxy. ii) In proxy, a direct connection is established between the client and destination server. A) True, False B) False, True C) True, True D) False, False

Description : State whether the following statement are true. i) An application-level gateway is often referred to as a proxy. ii) In proxy, a direct connection is established between the client and destination server. A) True, False B) False, True C) True, True D) False, False

Last Answer : A) True, False

On the upper layer of SSL, a protocol for initial authentication and transfer of encryption keys, called the ………………… A) SSL handshake protocol B) SSL authentication protocol

Description : On the upper layer of SSL, a protocol for initial authentication and transfer of encryption keys, called the ………………… A) SSL handshake protocol B) SSL authentication protocol

Last Answer : A) SSL handshake protocol

While initiating SSL session, the client code recognizes the SSL request and establishes a connection through TCP Part.................to the SSL code on the server. A) 420 B) 1032 C) 443 D) 322

Description : While initiating SSL session, the client code recognizes the SSL request and establishes a connection through TCP Part.................to the SSL code on the server. A) 420 B) 1032 C) 443 D) 322

Last Answer : C) 443

At the lower layer of SSL, a protocol for transferring data using a variety of predefined cipher and authentication combinations called the ………………. A) SSL handshake protocol B) SSL authentication protocol C) SSL record protocol D) SSL cipher protocol

Description : At the lower layer of SSL, a protocol for transferring data using a variety of predefined cipher and authentication combinations called the ………………. A) SSL handshake protocol B) SSL authentication protocol C) SSL record protocol D) SSL cipher protocol

Last Answer : C) SSL record protocol

The............................. Is a collection of protocols designed by Internet Engineering TaskForce(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Description : The............................. Is a collection of protocols designed by Internet Engineering TaskForce(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Last Answer : A) IPsec

In........................mode, a common technique in packet-switched networks consists of wrapping a packet in a new one. A) Tunneling B) Encapsulation C) Both A and B D) None of the above

Description : In........................mode, a common technique in packet-switched networks consists of wrapping a packet in a new one. A) Tunneling B) Encapsulation C) Both A and B D) None of the above

Last Answer : C) Both A and B

The................is used to provide integrity check, authentication and encryption to IPdatagram. A) SSL B) ESP C) TSL D) PSL

Description : The................is used to provide integrity check, authentication and encryption to IPdatagram. A) SSL B) ESP C) TSL D) PSL

Last Answer : B) ESP

The primary goal of the......................protocol is to provide a private channel between communicating application, which ensures privacy of data authentication of the partners, and integrity. A) SSL B) ESP C) TSL D) PSL

Description : The primary goal of the......................protocol is to provide a private channel between communicating application, which ensures privacy of data authentication of the partners, and integrity. A) SSL B) ESP C) TSL D) PSL

Last Answer : A) SSL

A ..................is an extension of an enterprise’s private intranet across a public Network such as the Internet across a public Network such as the Internet, creating a secure private connection. A) VNP B) VPN C) VSN D) VSPN

Description : A ..................is an extension of an enterprise’s private intranet across a public Network such as the Internet across a public Network such as the Internet, creating a secure private connection. A) VNP B) VPN C) VSN D) VSPN

Last Answer : B) VPN

State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Description : State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Last Answer : C) True, True

In.................. Mode, the authentication header is inserted immediately after the IP header. A) Tunnel B) Transport C) Authentication D) Both A and B

Description : In.................. Mode, the authentication header is inserted immediately after the IP header. A) Tunnel B) Transport C) Authentication D) Both A and B

Last Answer : A) Tunnel

.................... is used to carry traffic of one protocol over network that does not support that protocol directly. A) Tunneling

Description : .................... is used to carry traffic of one protocol over network that does not support that protocol directly. A) Tunneling

Last Answer : A) Tunneling

The components of IP security includes …………………. A) Authentication Header (AH) B) Encapsulating Security Payload (ESP) C) Internet key Exchange (IKE) D) All of the above

Description : The components of IP security includes …………………. A) Authentication Header (AH) B) Encapsulating Security Payload (ESP) C) Internet key Exchange (IKE) D) All of the above

Last Answer : D) All of the above

Which of the following is / are the types of firewall? A) Packet Filtering Firewall B) Dual Homed Gateway Firewall C) Screen Host Firewall D) All of the above

Description : Which of the following is / are the types of firewall? A) Packet Filtering Firewall B) Dual Homed Gateway Firewall C) Screen Host Firewall D) All of the above

Last Answer : D) All of the above

A firewall is installed at the point where the secure internal network and untrusted external network meet which is also known as ……………… A) Chock point B) meeting point C) firewall point D) secure point

Description : A firewall is installed at the point where the secure internal network and untrusted external network meet which is also known as ……………… A) Chock point B) meeting point C) firewall point D) secure point

Last Answer : A) Chock point

The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) ... v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

................is to protect data and passwords. A) Encryption B) Authentication C) Authorization D) Non-repudiation

Description : ................is to protect data and passwords. A) Encryption B) Authentication C) Authorization D) Non-repudiation

Last Answer : A) Encryption

Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Description : Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Last Answer : Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

A WAN typically spans a set of countries that have data ratesless than................ Mbps. A) 2 B) 1 C) 4 D) 100

Description : A WAN typically spans a set of countries that have data ratesless than................ Mbps. A) 2 B) 1 C) 4 D) 100

Last Answer : B) 1

............. is a set of information that is exchanged between a client and web browser and a web server during an HTTP transaction. A) infoset B) clientinfo C) cookie D) transkie

Description : ............. is a set of information that is exchanged between a client and web browser and a web server during an HTTP transaction. A) infoset B) clientinfo C) cookie D) transkie

Last Answer : C) cookie

Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Description : Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Last Answer : D) All i, ii, iii and iv

FTP server listens to connections on port ……………………. A) 19 and 20 B) 20 and 21 C) 21 and 22 D) 20 and 22

Description : FTP server listens to connections on port ……………………. A) 19 and 20 B) 20 and 21 C) 21 and 22 D) 20 and 22

Last Answer : B) 20 and 21