The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

The following protocols and system are commonly used to provide various degrees of security
services in computer network.
i) IP filtering ii) Reverse Address Translation
iii) IP security Architecture (IPsec) iv) Firewalls v) Socks
A) i, ii, iii and iv only
B) i, iii, iv and v only
C) ii, iii, iv and v only
D) All i, ii, iii, iv and v
by

1 Answer

Answer :

B) i, iii, iv and v only
by

Related questions

The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks ... only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, ... iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The............................. Is a collection of protocols designed by Internet Engineering TaskForce(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Description : The............................. Is a collection of protocols designed by Internet Engineering TaskForce(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Last Answer : A) IPsec

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Description : Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Last Answer : Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii ... and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The …………………………. Is a collection of protocols designed by Internet Engineering Task Force(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Description : The …………………………. Is a collection of protocols designed by Internet Engineering Task Force(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Last Answer : A) IPsec

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) Address Resolution Protocol (ARP) A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) ... C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

The examples of Interior Gateway Protocols (IGP) are. i) Open Short Path First (OSPF) ii) Routing Information Protocol (RIP) iii) Border Gateway Protocol (BGP) A) i only B) i, and ii only C) i and iii only D) All i, ii and iii

Description : The examples of Interior Gateway Protocols (IGP) are. i) Open Short Path First (OSPF) ii) Routing Information Protocol (RIP) iii) Border Gateway Protocol (BGP) A) i only B) i, and ii only C) i and iii only D) All i, ii and iii

Last Answer : B) i, and ii only

The standard suit of protocols used by the Internet, Intranets, extranets andsome other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Description : The standard suit of protocols used by the Internet, Intranets, extranets andsome other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Last Answer : A) TCP/IP

Which of the following TCP/IP protocols is used for transferring files form one machine to another. A) FTP B) SNMP C) SMTP D) RPC

Description : Which of the following TCP/IP protocols is used for transferring files form one machine to another. A) FTP B) SNMP C) SMTP D) RPC

Last Answer : A) FTP

Give the name of protocols used by different layers of TCP/IP. Discuss the function of ARP and RARP.

Description : Give the name of protocols used by different layers of TCP/IP. Discuss the function of ARP and RARP.

Last Answer : TCP/IP Model contains following layer. 1) Host-to-Network Layer - It defines characteristics of transmission media. It also concern with delivery of data when two systems are attached to same network ... such broadcasts are not forwarded by routers, so a RARP server is needed on each network. 

State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Description : State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Last Answer : C) True, True

The combination of ........... and ............. is often termed the local address or the local portion of the IP Address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number. D) All of the above

Description : The combination of ........... and ............. is often termed the local address or the local portion of the IP Address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number. D) All of the above

Last Answer : C) Subnet number and host number.

2.address use 7 bits for the <network> and 24 bits for the <host> portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Description : 2.address use 7 bits for the and 24 bits for the portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Last Answer : A) Class A

........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

Proxy application gateway (i) acts on behalf of all intranet users wanting to access interne securely (ii)monitors all accesses to internet and allows access to only specified IP addresses (iii) disallows use of certain protocols with security problems (iv) disallows all internet users from accessing intranet a. i, ii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Description : Proxy application gateway (i) acts on behalf of all intranet users wanting to access interne securely (ii)monitors all accesses to internet and allows access to only specified IP addresses (iii) disallows use of certain protocols with ... ii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Last Answer : b. i, ii, iii 

A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed

Description : A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed 

Last Answer : For RC series circuit

Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Description : Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Last Answer : D) All i, ii, iii and iv

Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or allhosts. ii) The class A network 128.0.0.0 is defined as the loopbacknetwork. A) i only B) ii only C) Both A and B D) None of the above

Description : Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or allhosts. ii) The class A network 128.0.0.0 is defined as the loopbacknetwork. A) i only B) ii only C) Both A and B D) None of the above

Last Answer : A) i only

(i) Bilateral Network (ii) Node (iii) Loop (iv) Branch

Description : (i) Bilateral Network (ii) Node (iii) Loop (iv) Branch

Last Answer : (i) Bilateral Network: If the characteristic of network (response or behavior) is independent of the direction of current through its elements in it, then the network is called as a bilateral network e. ... A part of an electric network which lies between two junctions or nodes is known as branch. 

Explain following protocols: I. PPP II. SLIP

Description : Explain following protocols: I. PPP II. SLIP

Last Answer : (i)PPP:-PPP means point to point protocol. It is a much more developed protocol than SLIP(which is why it is replacing it).It transfers additional data, better suited to data transmission over the ... character(the END character, the ASCII code of which is 192).A SLIP frame looks like:

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Which of the following OSI layers correspond to TCP/IP's application layer? A) Application B) IP Address C) Session D) All of the above

Description : Which of the following OSI layers correspond to TCP/IP's application layer? A) Application B) IP Address C) Session D) All of the above

Last Answer : D) All of the above

DNS can obtain the ..................of host if its domain name is known and vice versa. A) Station address B) IP address C) Port address D) Checksum

Description : DNS can obtain the ..................of host if its domain name is known and vice versa. A) Station address B) IP address C) Port address D) Checksum

Last Answer : B) IP address

List different classes of IP Address.

Description : List different classes of IP Address.

Last Answer : Different classes of IP address. Class A Class B Class C Class D Class E

The components of IP security includes …………………. A) Authentication Header (AH) B) Encapsulating Security Payload (ESP) C) Internet key Exchange (IKE) D) All of the above

Description : The components of IP security includes …………………. A) Authentication Header (AH) B) Encapsulating Security Payload (ESP) C) Internet key Exchange (IKE) D) All of the above

Last Answer : D) All of the above

State the functions of i. Repeater ii. Switch iii. Gateway iv. Bridges

Description : State the functions of i. Repeater ii. Switch iii. Gateway iv. Bridges

Last Answer : i) Repeater: Repeaters are used to take the distorted, weak and corrupt input signal and regenerate this signal at its output. It ensures that the signals are not distorted or weak before it ... and decides whether to forward or discard it. It sends packets between two networks of same type.

Write the name of layers that perform the following functions in OSI : I. Data Encryption II. Error Correction III. File Transfer IV. Data Encoding

Description : Write the name of layers that perform the following functions in OSI : I. Data Encryption II. Error Correction III. File Transfer IV. Data Encoding

Last Answer : 1. Data Encryption-Presentation Layer 2. Error Correction-Data link layer and Transport layer 3. File Transfer-Application layer 4. Data Encoding-Presentation layer

Explain the services provided by transport layer in TCP/IP model.

Description : Explain the services provided by transport layer in TCP/IP model.

Last Answer : Responsibility of process to process delivery of message Ensure that whole message arrives in order. 1. Service point addressing: -several programs run at a time on computer. Delivery is ... transport layer without error(damage or loss or duplication). Error correction is done by retransmission.

Regional Internet Registers (RIR) of the following? A) American Registry for Internet Numbers (ARIN) B) Europeans Registry for Internet Numbers (ERIN) C) Reseaux IP Europeans (RIPE) D) Asia Pacific Network Information Centre (APNIC)

Description : Which is not the Regional Internet Registers (RIR) of the following? A) American Registry for Internet Numbers (ARIN) B) Europeans Registry for Which is not the Internet Numbers (ERIN) C) Reseaux IP Europeans (RIPE) D) Asia Pacific Network Information Centre (APNIC)

Last Answer : C) i-c, ii-a, iii-d, iv-b

Which is not the Regional Internet Registers (RIR) of the following? A) American Registry for Internet Numbers (ARIN) B) Europeans Registry for Internet Numbers (ERIN) C) Reseaux IP Europeans (RIPE) D) Asia Pacific Network Information Centre (APNIC)

Description : Which is not the Regional Internet Registers (RIR) of the following? A) American Registry for Internet Numbers (ARIN) B) Europeans Registry for Internet Numbers (ERIN) C) Reseaux IP Europeans (RIPE) D) Asia Pacific Network Information Centre (APNIC)

Last Answer : Europeans Registry for Internet Numbers (ERIN)

Which of the following is / are the types of firewall? A) Packet Filtering Firewall B) Dual Homed Gateway Firewall C) Screen Host Firewall D) All of the above

Description : Which of the following is / are the types of firewall? A) Packet Filtering Firewall B) Dual Homed Gateway Firewall C) Screen Host Firewall D) All of the above

Last Answer : D) All of the above

Point out the correct statement. a) Service Oriented Architecture (SOA) describes a standard method for requesting services from distributed components and managing the results b) SOA provides the translation and management layer in an architecture that removes the barrier for a client obtaining desired services c) With SOA, clients and components can be written in different languages and can use multiple messaging protocols d) All of the mentioned

Description : Point out the correct statement. a) Service Oriented Architecture (SOA) describes a standard method for requesting services from distributed components and managing the results b) SOA provides the ... written in different languages and can use multiple messaging protocols d) All of the mentioned

Last Answer : All of the mentioned

Point out the correct statement. a) Service Oriented Architecture (SOA) describes a standard method for requesting services from distributed components and managing the results b) SOA provides the translation and management layer in an architecture that removes the barrier for a client obtaining desired services c) With SOA, clients and components can be written in different languages and can use multiple messaging protocols d) All of the mentioned

Description : Point out the correct statement. a) Service Oriented Architecture (SOA) describes a standard method for requesting services from distributed components and managing the results b) SOA provides the ... written in different languages and can use multiple messaging protocols d) All of the mentioned

Last Answer : All of the mentioned

Define protocol. Give the name of any two protocols.

Description : Define protocol. Give the name of any two protocols.

Last Answer : Define protocol: There are certain rules that must be followed to ensure proper communication & a set of such rules is known as protocol. Example: UDP, TCP/IP, SMTP, HTTP, SSL, FTP etc

Compare series and parallel resonance on the basis of (i) Resonating frequency (ii) Impedance (iii) Current (iv) Magnification

Description : Compare series and parallel resonance on the basis of (i) Resonating frequency (ii) Impedance (iii) Current (iv) Magnification

Last Answer : S. No . Parameter Series Circuit Parallel Circuit 1 Resonating frequency 2 Impedance Minimum, Z = R Maximum, Z = L/CR 3 Current Maximum, I ... , I = V/(L/CR)  4 Magnification Voltage magnification takes place Current magnification takes place

Explain the architecture of Bluetooth technology with suitable diagram.

Description : Explain the architecture of Bluetooth technology with suitable diagram.

Last Answer : Bluetooth is short range wireless technology. Range of Bluetooth is 10 meters. Bluetooth Architecture defines 2 types of networks. 1)Piconet 2)Scatternet Piconet: - It is a Bluetooth network that ... . This node is called bridge slave. This node cannot be the master of two piconets.

Why layered architecture is used in OSI reference model? Discuss.

Description : Why layered architecture is used in OSI reference model? Discuss.

Last Answer : The OSI reference model is as shown in the figure.There are seven layers in the model. Physical layer, Data link layer, Network layer, Transport layer, Session layer, Presentation layer, ... the entire package is converted to a form that can be transferred to the receiving machine. 

The type of threats on the security of a computer system or network are …………………….. i) Interruption ii)Interception iii) Modification iv) Creation v)Fabrication a) i, ii, iii and iv only b) ii, iii, iv and v only c) i, ii, iii and v only d) All i, ii, iii, iv and v

Description : The type of threats on the security of a computer system or network are …………………….. i) Interruption ii)Interception iii) Modification iv) Creation v)Fabrication a) i, ii, iii and iv only b) ii, iii, iv and v only c) i, ii, iii and v only d) All i, ii, iii, iv and v

Last Answer : c) i, ii, iii and v only

The type of threats on the security of a computer system or network are …………………….. i) Interruption ii) Interception iii) Modification iv) Creation v) Fabrication A) i, ii, iii and iv only B) ii, iii, iv and v only C) i, ii, iii and v only D) All i, ii, iii, iv and v

Description : The type of threats on the security of a computer system or network are …………………….. i) Interruption ii) Interception iii) Modification iv) Creation v) Fabrication A) i, ii, iii and iv only B) ii, iii, iv and v only C) i, ii, iii and v only D) All i, ii, iii, iv and v

Last Answer : C) i, ii, iii and v only

In.................. Mode, the authentication header is inserted immediately after the IP header. A) Tunnel B) Transport C) Authentication D) Both A and B

Description : In.................. Mode, the authentication header is inserted immediately after the IP header. A) Tunnel B) Transport C) Authentication D) Both A and B

Last Answer : A) Tunnel

Which of the following is not the layer of TCP/IP protocol? A) Application Layer B) Session Layer C) Transport Layer D) Internetwork layer

Description : Which of the following is not the layer of TCP/IP protocol? A) Application Layer B) Session Layer C) Transport Layer D) Internetwork layer

Last Answer : B) Session Layer

Which of the following of the TCP/IP protocolsis the used for transferring filesfrom one machine to another? A) FTP C) SNMP B) SMTP D) Rpe

Description : Which of the following of the TCP/IP protocolsis the used for transferring filesfrom one machine to another? A) FTP C) SNMP B) SMTP D) Rpe

Last Answer : A) FTP

The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Description : The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Last Answer : D) Frame

TCP/IP ..................layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Description : TCP/IP ..................layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Last Answer : A) UDP

The name of the protocol which provides virtual terminal in TCP/IP model is. A) Telnet B) SMTP C) HTTP

Description : The name of the protocol which provides virtual terminal in TCP/IP model is. A) Telnet B) SMTP C) HTTP

Last Answer : A) Telnet

It is desired to connect five computers that are joined at a single point called central node. i) Draw the setup. ii) Name the topology. iii) State two advantages and disadvantages of this topology.

Description : It is desired to connect five computers that are joined at a single point called central node. i) Draw the setup. ii) Name the topology. iii) State two advantages and disadvantages of this topology.

Last Answer : i. Setup:  ii. Name of topology: Star topology iii. Advantages of Star Topology 1) As compared to Bus topology it gives far much better performance, signals don't necessarily get ... as well number of nodes which can be added in such topology is depended on capacity of central device.