Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Which of the following are the solutions to network security?
i) Encryption ii) Authentication
iii) Authorization iv) Non-repudiation
A) i, ii and iii only
B) ii, iii and iv only
C) i, iii and iv only
D) All i, ii, iii and iv
by

1 Answer

Answer :

Which of the following are the solutions to network security?
i) Encryption ii) Authentication
iii) Authorization iv) Non-repudiation
A) i, ii and iii only
B) ii, iii and iv only
C) i, iii and iv only
D) All i, ii, iii and iv
by

Related questions

Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Description : Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Last Answer : D) All i, ii, iii and iv

................is to protect data and passwords. A) Encryption B) Authentication C) Authorization D) Non-repudiation

Description : ................is to protect data and passwords. A) Encryption B) Authentication C) Authorization D) Non-repudiation

Last Answer : A) Encryption

………… is to protect data and passwords. A) Encryption B) Authentication C) Authorization D) Non-repudiation

Description : ………… is to protect data and passwords. A) Encryption B) Authentication C) Authorization D) Non-repudiation

Last Answer : A) Encryption

The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) ... v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

Write the name of layers that perform the following functions in OSI : I. Data Encryption II. Error Correction III. File Transfer IV. Data Encoding

Description : Write the name of layers that perform the following functions in OSI : I. Data Encryption II. Error Correction III. File Transfer IV. Data Encoding

Last Answer : 1. Data Encryption-Presentation Layer 2. Error Correction-Data link layer and Transport layer 3. File Transfer-Application layer 4. Data Encoding-Presentation layer

On the upper layer of SSL, a protocol for initial authentication and transfer of encryption keys, called the ………………… A) SSL handshake protocol B) SSL authentication protocol

Description : On the upper layer of SSL, a protocol for initial authentication and transfer of encryption keys, called the ………………… A) SSL handshake protocol B) SSL authentication protocol

Last Answer : A) SSL handshake protocol

The................is used to provide integrity check, authentication and encryption to IPdatagram. A) SSL B) ESP C) TSL D) PSL

Description : The................is used to provide integrity check, authentication and encryption to IPdatagram. A) SSL B) ESP C) TSL D) PSL

Last Answer : B) ESP

The components of IP security includes …………………. A) Authentication Header (AH) B) Encapsulating Security Payload (ESP) C) Internet key Exchange (IKE) D) All of the above

Description : The components of IP security includes …………………. A) Authentication Header (AH) B) Encapsulating Security Payload (ESP) C) Internet key Exchange (IKE) D) All of the above

Last Answer : D) All of the above

_____ is unauthorized access to or use of data, systems, server or networks including any attempt to probe scan or test the vulnerability of a system, server or network or to breach security or authentication measures without express authorization of the owner of the system, server or network: a) Hacking b) Cracking c) Viruses d) None of These

Description : _____ is unauthorized access to or use of data, systems, server or networks including any attempt to probe scan or test the vulnerability of a system, server or network or to breach security or authentication ... the system, server or network: a) Hacking b) Cracking c) Viruses d) None of These

Last Answer : a) Hacking

_____ is unauthorized access to or use of data, systems, server or networks including any attempt to probe scan or test the vulnerability of a system, server or network or to breach security or authentication measures without express authorization of the owner of the system, server or network: a) Hacking b) Cracking c) Viruses d) None of These

Description : _____ is unauthorized access to or use of data, systems, server or networks including any attempt to probe scan or test the vulnerability of a system, server or network or to breach security or authentication ... the system, server or network: a) Hacking b) Cracking c) Viruses d) None of These

Last Answer : a) Hacking

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, ... iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Description : Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Last Answer : D) All i, ii, iii and iv

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

(i) Bilateral Network (ii) Node (iii) Loop (iv) Branch

Description : (i) Bilateral Network (ii) Node (iii) Loop (iv) Branch

Last Answer : (i) Bilateral Network: If the characteristic of network (response or behavior) is independent of the direction of current through its elements in it, then the network is called as a bilateral network e. ... A part of an electric network which lies between two junctions or nodes is known as branch. 

State the functions of i. Repeater ii. Switch iii. Gateway iv. Bridges

Description : State the functions of i. Repeater ii. Switch iii. Gateway iv. Bridges

Last Answer : i) Repeater: Repeaters are used to take the distorted, weak and corrupt input signal and regenerate this signal at its output. It ensures that the signals are not distorted or weak before it ... and decides whether to forward or discard it. It sends packets between two networks of same type.

At the lower layer of SSL, a protocol for transferring data using a variety of predefined cipher and authentication combinations called the ………………. A) SSL handshake protocol B) SSL authentication protocol C) SSL record protocol D) SSL cipher protocol

Description : At the lower layer of SSL, a protocol for transferring data using a variety of predefined cipher and authentication combinations called the ………………. A) SSL handshake protocol B) SSL authentication protocol C) SSL record protocol D) SSL cipher protocol

Last Answer : C) SSL record protocol

The primary goal of the......................protocol is to provide a private channel between communicating application, which ensures privacy of data authentication of the partners, and integrity. A) SSL B) ESP C) TSL D) PSL

Description : The primary goal of the......................protocol is to provide a private channel between communicating application, which ensures privacy of data authentication of the partners, and integrity. A) SSL B) ESP C) TSL D) PSL

Last Answer : A) SSL

In.................. Mode, the authentication header is inserted immediately after the IP header. A) Tunnel B) Transport C) Authentication D) Both A and B

Description : In.................. Mode, the authentication header is inserted immediately after the IP header. A) Tunnel B) Transport C) Authentication D) Both A and B

Last Answer : A) Tunnel

A digital signature is required (i) to tie an electronic message to the sender’s identity (ii)for non repudiation of communication by a sender (iii) to prove that a message was sent by the sender in a court of law (iv) in all e-mail transactions a. i and ii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Description : A digital signature is required (i) to tie an electronic message to the sender's identity (ii)for non repudiation of communication by a sender (iii) to prove that a message was sent by the sender in a court of law (iv) in all ... a. i and ii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Last Answer : b. i, ii, iii

A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed

Description : A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed 

Last Answer : For RC series circuit

Compare series and parallel resonance on the basis of (i) Resonating frequency (ii) Impedance (iii) Current (iv) Magnification

Description : Compare series and parallel resonance on the basis of (i) Resonating frequency (ii) Impedance (iii) Current (iv) Magnification

Last Answer : S. No . Parameter Series Circuit Parallel Circuit 1 Resonating frequency 2 Impedance Minimum, Z = R Maximum, Z = L/CR 3 Current Maximum, I ... , I = V/(L/CR)  4 Magnification Voltage magnification takes place Current magnification takes place

The............................. Is a collection of protocols designed by Internet Engineering TaskForce(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Description : The............................. Is a collection of protocols designed by Internet Engineering TaskForce(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Last Answer : A) IPsec

The examples of Interior Gateway Protocols (IGP) are. i) Open Short Path First (OSPF) ii) Routing Information Protocol (RIP) iii) Border Gateway Protocol (BGP) A) i only B) i, and ii only C) i and iii only D) All i, ii and iii

Description : The examples of Interior Gateway Protocols (IGP) are. i) Open Short Path First (OSPF) ii) Routing Information Protocol (RIP) iii) Border Gateway Protocol (BGP) A) i only B) i, and ii only C) i and iii only D) All i, ii and iii

Last Answer : B) i, and ii only

Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or allhosts. ii) The class A network 128.0.0.0 is defined as the loopbacknetwork. A) i only B) ii only C) Both A and B D) None of the above

Description : Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or allhosts. ii) The class A network 128.0.0.0 is defined as the loopbacknetwork. A) i only B) ii only C) Both A and B D) None of the above

Last Answer : A) i only

It is desired to connect five computers that are joined at a single point called central node. i) Draw the setup. ii) Name the topology. iii) State two advantages and disadvantages of this topology.

Description : It is desired to connect five computers that are joined at a single point called central node. i) Draw the setup. ii) Name the topology. iii) State two advantages and disadvantages of this topology.

Last Answer : i. Setup:  ii. Name of topology: Star topology iii. Advantages of Star Topology 1) As compared to Bus topology it gives far much better performance, signals don't necessarily get ... as well number of nodes which can be added in such topology is depended on capacity of central device.

State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Description : State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Last Answer : C) True, True

State whether the following is True or False. i) In bus topology, heavy Network traffic slows down the busspeed. ii) It is multipoint configuration. A) True, True B) True, False C) False, True D) False, False

Description : State whether the following is True or False. i) In bus topology, heavy Network traffic slows down the busspeed. ii) It is multipoint configuration. A) True, True B) True, False C) False, True D) False, False

Last Answer : A) True, True

DES (i) is a symmetric key encryption method (ii)guarantees absolute security (iii) is implementable as hardware VLSI chip (iv) is a public key encryption method a. i and ii b. ii and iii c. i and iii d. iii and iv

Description : DES (i) is a symmetric key encryption method (ii)guarantees absolute security (iii) is implementable as hardware VLSI chip (iv) is a public key encryption method a. i and ii b. ii and iii c. i and iii d. iii and iv

Last Answer : c. i and iii 

..................mode is used whenever either end of a security association is gateway. A) Tunnel B) Encapsulating C) Transport D) Gateway

Description : ..................mode is used whenever either end of a security association is gateway. A) Tunnel B) Encapsulating C) Transport D) Gateway

Last Answer : A) Tunnel

State whether true or false. i) A connection oriented protocol can only use unicast addresses. ii) The any cast service is included in IPV6. A) True, False B) True, True C) False, True D) False, False

Description : State whether true or false. i) A connection oriented protocol can only use unicast addresses. ii) The any cast service is included in IPV6. A) True, False B) True, True C) False, True D) False, False

Last Answer : B) True, True

An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance

Description : An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance 

Last Answer : Solution: For RLC series circuit

For R-C series circuit draw (i) Circuit diagram (ii) Vector diagram (iii) Waveform of voltage and current

Description : For R-C series circuit draw (i) Circuit diagram (ii) Vector diagram (iii) Waveform of voltage and current

Last Answer : i) Circuit diagram ii)Vector diagram iii)Waveform of voltage and current

A ..................is an extension of an enterprise’s private intranet across a public Network such as the Internet across a public Network such as the Internet, creating a secure private connection. A) VNP B) VPN C) VSN D) VSPN

Description : A ..................is an extension of an enterprise’s private intranet across a public Network such as the Internet across a public Network such as the Internet, creating a secure private connection. A) VNP B) VPN C) VSN D) VSPN

Last Answer : B) VPN

.................... is used to carry traffic of one protocol over network that does not support that protocol directly. A) Tunneling

Description : .................... is used to carry traffic of one protocol over network that does not support that protocol directly. A) Tunneling

Last Answer : A) Tunneling

A firewall is installed at the point where the secure internal network and untrusted external network meet which is also known as ……………… A) Chock point B) meeting point C) firewall point D) secure point

Description : A firewall is installed at the point where the secure internal network and untrusted external network meet which is also known as ……………… A) Chock point B) meeting point C) firewall point D) secure point

Last Answer : A) Chock point

........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

............ implies that all subnets obtained from the same network use the subnet mask. A) Static subnetting B) Dynamic Subnetting C) Variable length subnetting D) Both B and C

Description : ............ implies that all subnets obtained from the same network use the subnet mask. A) Static subnetting B) Dynamic Subnetting C) Variable length subnetting D) Both B and C

Last Answer : A) Static subnetting

The combination of ........... and ............. is often termed the local address or the local portion of the IP Address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number. D) All of the above

Description : The combination of ........... and ............. is often termed the local address or the local portion of the IP Address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number. D) All of the above

Last Answer : C) Subnet number and host number.

8............. was the first step in the evolution of Ethernet from a coaxial cable bus to hubmanaged, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Description : 8............. was the first step in the evolution of Ethernet from a coaxial cable bus to hubmanaged, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Last Answer : A) Star LAN

Regional Internet Registers (RIR) of the following? A) American Registry for Internet Numbers (ARIN) B) Europeans Registry for Internet Numbers (ERIN) C) Reseaux IP Europeans (RIPE) D) Asia Pacific Network Information Centre (APNIC)

Description : Which is not the Regional Internet Registers (RIR) of the following? A) American Registry for Internet Numbers (ARIN) B) Europeans Registry for Which is not the Internet Numbers (ERIN) C) Reseaux IP Europeans (RIPE) D) Asia Pacific Network Information Centre (APNIC)

Last Answer : C) i-c, ii-a, iii-d, iv-b

Which is not the Regional Internet Registers (RIR) of the following? A) American Registry for Internet Numbers (ARIN) B) Europeans Registry for Internet Numbers (ERIN) C) Reseaux IP Europeans (RIPE) D) Asia Pacific Network Information Centre (APNIC)

Description : Which is not the Regional Internet Registers (RIR) of the following? A) American Registry for Internet Numbers (ARIN) B) Europeans Registry for Internet Numbers (ERIN) C) Reseaux IP Europeans (RIPE) D) Asia Pacific Network Information Centre (APNIC)

Last Answer : Europeans Registry for Internet Numbers (ERIN)

2.address use 7 bits for the <network> and 24 bits for the <host> portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Description : 2.address use 7 bits for the and 24 bits for the portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Last Answer : A) Class A

Which of the following is/ are the drawbacks of Ring Topology? A) Failure of one computer, can affect the whole network B) Adding or removing the computers disturbs the network activity. C) If the central hub fails, the whole network fails to operate. D) Both of A and B

Description : Which of the following is/ are the drawbacks of Ring Topology? A) Failure of one computer, can affect the whole network B) Adding or removing the computers disturbs the network activity. C) If the central hub fails, the whole network fails to operate. D) Both of A and B

Last Answer : D) Both of A and B

In a................ topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Description : In a................ topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Last Answer : Mesh

In which OSI layers does the FDDI protocol operate? A) Physical B) Data link C) Network D) A and B

Description : In which OSI layers does the FDDI protocol operate? A) Physical B) Data link C) Network D) A and B

Last Answer : D) A and B

Which layers of the OSI determines the interface often system with the user? A) Network B) Application C) Data link D) Session

Description : Which layers of the OSI determines the interface often system with the user? A) Network B) Application C) Data link D) Session

Last Answer : B) Application

Devices on one network can communicate with devices on another network via a ....... A) File Server B) Utility Server C) Printer Server D) Gateway

Description : Devices on one network can communicate with devices on another network via a ....... A) File Server B) Utility Server C) Printer Server D) Gateway

Last Answer : D) Gateway

What is the name of the network topology in which there are bi-directional links between each possible node? A) Ring B) Star C) Tree D) Mesh

Description : What is the name of the network topology in which there are bi-directional links between each possible node? A) Ring B) Star C) Tree D) Mesh

Last Answer : Mesh

Find out the OSI layer, which performs token management. A) Network Layer B) Transport Layer C) Session Layer D) Presentation Layer

Description : Find out the OSI layer, which performs token management. A) Network Layer B) Transport Layer C) Session Layer D) Presentation Layer

Last Answer : C) Session Layer