A capacitor (condenser) is used in an electrical circuit to (a) step down voltage (b) step up voltage (c) store electric charge (d) produce electric charge

A capacitor (condenser) is used in an electrical circuit to (a) step down voltage (b) step up voltage (c) store electric charge (d) produce electric charge
by

1 Answer

Answer :

Ans:(c)
by
selected

Related questions

Which of the device is employed in substation to limit the short circuit current in the power system: a) Shunt condenser b) Reactor c) Series capacitor d) Shunt capacitor

Description : Which of the device is employed in substation to limit the short circuit current in the power system: a) Shunt condenser b) Reactor c) Series capacitor d) Shunt capacitor

Last Answer : Ans: B

A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Description : A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Last Answer : 0.1 microfarads 40% from the graph = 0.5

What is the voltage drop across the resistor in an RC charging circuit when the charge on the capacitor is equal to the battery voltage?

Description : What is the voltage drop across the resistor in an RC charging circuit when the charge on the capacitor is equal to the battery voltage?

Last Answer : Zero.

A 10 farad capacitor is used in a circuit. The voltage difference between the plates of the capacitor is 20 volts. What is the magnitude of the charge on each of the capacitor's plates?

Description : A 10 farad capacitor is used in a circuit. The voltage difference between the plates of the capacitor is 20 volts. What is the magnitude of the charge on each of the capacitor's plates?

Last Answer : ANSWER: 200 COULOMBS

A device used in an electrical circuit to change alternating current to direct current, is known as a _____________. A. current transformer B. rectifier C. condenser D. shunt

Description : A device used in an electrical circuit to change alternating current to direct current, is known as a _____________. A. current transformer B. rectifier C. condenser D. shunt

Last Answer : Answer: B

In a step-up or step-down transformer, electrical power is transferred from one circuit to another without change in

Description : In a step-up or step-down transformer, electrical power is transferred from one circuit to another without change in

Last Answer : In a step-up or step-down transformer, electrical power is transferred from one circuit to another without change in frequency

Device used to store energy in electrical circuits is A. resistor B. inductor C. capacitor D. diode

Description : Device used to store energy in electrical circuits is A. resistor B. inductor C. capacitor D. diode

Last Answer : capacitor

A galvanometer is an instrument used to measure ___________. A. thickness of galvanized metal B. resistance of electrical wiring insulation C. very small amounts of current or voltage D. quantity of galvans in an electric circuit

Description : A galvanometer is an instrument used to measure ___________. A. thickness of galvanized metal B. resistance of electrical wiring insulation C. very small amounts of current or voltage D. quantity of galvans in an electric circuit

Last Answer : Answer: C

A transformer in an electric circuit serves to ____________. A. generate its own electrical power B. transform electrical energy into mechanical energy C. increase or decrease circuit voltage as required D. convert AC current to DC current

Description : A transformer in an electric circuit serves to ____________. A. generate its own electrical power B. transform electrical energy into mechanical energy C. increase or decrease circuit voltage as required D. convert AC current to DC current

Last Answer : Answer: C

Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x) The magnitude of the charge is the same on all of the capacitor plates. y) The capacitance of the system depends on the voltage applied across the three capacitors.

Description : Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x ... y) The capacitance of the system depends on the voltage applied across the three capacitors.

Last Answer : ANSWER: X -- THE MAGNITUDE OF THE CHARGE IS THE SAME ON ALL OF THE CAPACITOR PLATES

An ideal voltage source will charge an ideal capacitor

Description :  An ideal voltage source will charge an ideal capacitor A) in infinite time B) exponentially C) instantaneously D) cannot be guessed

Last Answer : An ideal voltage source will charge an ideal capacitor instantaneously 

The electric charge is stored in a device called: (1) Inductor (2) Capacitor (3) Resister (4) Transformer

Description : The electric charge is stored in a device called: (1) Inductor (2) Capacitor (3) Resister (4) Transformer

Last Answer : (2) Capacitor Explanation: A capacitor is a passive twoterminal electronic component that stores electrical energy in an electric field. The effect of a capacitor is known as capacitance.

When working on electrical circuits containing large capacitors, in addition to deenergizing the circuit, which of the listed precautions should also be taken? A. Keep all radio equipment away. B. Measure capacitor insulation resistance. C. Ground the capacitor terminals. D. Check capacitor circuit polarity.

Description : When working on electrical circuits containing large capacitors, in addition to deenergizing the circuit, which of the listed precautions should also be taken? A. Keep all radio equipment ... capacitor insulation resistance. C. Ground the capacitor terminals. D. Check capacitor circuit polarity.

Last Answer : Answer: C

Electrical circuits are protected against overheating by means of a/an ______________. A. circuit breaker B. amplifier C. diode D. capacitor

Description : Electrical circuits are protected against overheating by means of a/an ______________. A. circuit breaker B. amplifier C. diode D. capacitor

Last Answer : Answer: A

In an L-C circuit shown in figure C=1F, L=4H At time t=0, charge in the capacitor is 4C and it is decreasing at a rate of `sqrt5 C//s` Choose the corr

Description : In an L-C circuit shown in figure C=1F, L=4H At time t=0, charge in the capacitor is 4C and it is decreasing at a rate of `sqrt5 C//s` Choose the corr

Last Answer : In an L-C circuit shown in figure C=1F, L=4H At time t=0, charge in the capacitor is 4C and it is ... a and b are correct D. Both a and b are wrong

In an `LC` circuit shows in Fig. `C = 1 F`, `L = 4 H`. At time `t = 0`, charge in the capacitor is `4 C` and it is decreasing at the rate of `sqrt(5)

Description : In an `LC` circuit shows in Fig. `C = 1 F`, `L = 4 H`. At time `t = 0`, charge in the capacitor is `4 C` and it is decreasing at the rate of `sqrt(5)

Last Answer : In an `LC` circuit shows in Fig. `C = 1 F`, `L = 4 H`. At time `t = 0`, charge in the capacitor is `4 ... ))` C. `2tan^(-1)((2)/(3)) D. None of these

In an `LC` circuit shows in Fig. `C = 1 F`, `L = 4 H`. At time `t = 0`, charge in the capacitor is `4 C` and it is decreasing at the rate of `sqrt(5)

Description : In an `LC` circuit shows in Fig. `C = 1 F`, `L = 4 H`. At time `t = 0`, charge in the capacitor is `4 C` and it is decreasing at the rate of `sqrt(5)

Last Answer : In an `LC` circuit shows in Fig. `C = 1 F`, `L = 4 H`. At time `t = 0`, charge in the capacitor is `4 ... statement. A. 6 C B. 8 C C. 10 C D. 12 C

In the illustration, the small battery and Rb are in the circuit to apply ________. EL-0022 A. forward bias to the emitter-base B. reverse bias to the emitter-base C. a 'reference charge' on the input capacitor D. a buffer between the input ground and the emitter ground

Description : In the illustration, the small battery and Rb are in the circuit to apply ________. EL-0022 A. forward bias to the emitter-base B. reverse bias to the emitter-base C. a 'reference charge' on the input capacitor D. a buffer between the input ground and the emitter ground

Last Answer : Answer: A

The purpose of the capacitor within component 'B' of the circuit shown in the illustration is to ____________. EL-0081 A. prolong the life of the component's contacts B. discharge the neon within the envelope C. counteract the inductive reactance in the circuit D. store power to operate the circuit should 'D' open

Description : The purpose of the capacitor within component 'B' of the circuit shown in the illustration is to ____________. EL-0081 A. prolong the life of the component's contacts B. discharge the neon within ... the inductive reactance in the circuit D. store power to operate the circuit should 'D' open

Last Answer : Answer: A

Capacitance in an AC circuit will _____________. A. stop current flow once the capacitor is fully charged B. allow current flow in only one direction C. oppose any change in circuit voltage D. rectify the current

Description : Capacitance in an AC circuit will _____________. A. stop current flow once the capacitor is fully charged B. allow current flow in only one direction C. oppose any change in circuit voltage D. rectify the current

Last Answer : Answer: C

How do you eliminate radio frequency variation of an oscillator transmitter caused by its supply voltage? A. Use new power supply B. Lossen power supply shielding C. Use of regulated power supply D. Use of high capacitor in the supply circuit

Description : How do you eliminate radio frequency variation of an oscillator transmitter caused by its supply voltage? A. Use new power supply B. Lossen power supply shielding C. Use of regulated power supply D. Use of high capacitor in the supply circuit

Last Answer : C. Use of regulated power supply

At what instant does the greatest voltage appear across the resistor in a series RC circuit when the capacitor is charging?

Description : At what instant does the greatest voltage appear across the resistor in a series RC circuit when the capacitor is charging?

Last Answer : At the instant of the initiation of the action.

a. Define the term "working voltage" of a capacitor. b. What should be the working voltage of a capacitor in a circuit that is operating at 600 volts?

Description : a. Define the term "working voltage" of a capacitor. b. What should be the working voltage of a capacitor in a circuit that is operating at 600 volts?

Last Answer : a. It is the maximum voltage the capacitor can work without risk of damage. b. 900 volts.

What happens to current flow in a capacitive circuit when the DC voltage across the capacitor is

Description : What happens to current flow in a capacitive circuit when the DC voltage across the capacitor is approximately equal to the source voltage?

Last Answer : Capacitor always charges up to the voltage of source. When the capacitor is charged to same as source voltage then there is no current flowing through the capacitor. The current through the capacitor is called displacement current. 

In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor

Description : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor  A) Is always zero B) Can never be greater than the input voltage C) Can be greater than the input ... input voltage D) Can be greater than the input voltage, and is in phase with the input voltage

Last Answer : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor Can be greater than the input voltage, however, it is 90° out of phase with the input voltage 

Electric circuits are protected against overloads and short circuits by means of a/an ______________. A. circuit breaker B. amplifier C. diode D. capacitor

Description : Electric circuits are protected against overloads and short circuits by means of a/an ______________. A. circuit breaker B. amplifier C. diode D. capacitor

Last Answer : Answer: A

A ground is indicated by the ground-detecting system on the main electrical switchboard. The FIRST step in locating the actual ground is to _____________. A. close all circuit breakers in the distribution panel until the ground detector indicates normal B. open the individual circuit breakers, one by one until the ground detection system indicates normal C. change over generators D. check each circuit with a megohmmeter

Description : A ground is indicated by the ground-detecting system on the main electrical switchboard. The FIRST step in locating the actual ground is to _____________. A. close all circuit breakers in ... ground detection system indicates normal C. change over generators D. check each circuit with a megohmmeter

Last Answer : Answer: B

The primary function of an electric motor is to ___________. A. develop torque B. generate high voltages C. produce a magnetic field D. generate high electrical resistance

Description : The primary function of an electric motor is to ___________. A. develop torque B. generate high voltages C. produce a magnetic field D. generate high electrical resistance

Last Answer : Answer: A

Which of the following equipment, for regulating the voltage in distribution feeder, will be most economical ? (a) Static condenser (b) Synchronous condenser (c) Tap changing transformer (d) Booster transformer

Description : Which of the following equipment, for regulating the voltage in distribution feeder, will be most economical ? (a) Static condenser (b) Synchronous condenser (c) Tap changing transformer (d) Booster transformer

Last Answer : (d) Booster transformer

The voltage at the reference electrode of the circuit shown in the illustration is applied to the input of a/an ______________. EL-0090 A. class A detector whose output drives an autotransformer B. operational amplifier whose output controls a step-up voltage reactor C. amplitude modulator whose output drives an 2-stage isolation transformer D. magnetic amplifier whose output controls a saturable reactor

Description : The voltage at the reference electrode of the circuit shown in the illustration is applied to the input of a/an ______________. EL-0090 A. class A detector whose output drives an ... drives an 2-stage isolation transformer D. magnetic amplifier whose output controls a saturable reactor

Last Answer : Answer: D

After closing the circuit breaker to place two similar alternators in parallel, the NEXT step is to balance the _____________. A. power factor B. voltage load C. kilowatt load D. ampere load

Description : After closing the circuit breaker to place two similar alternators in parallel, the NEXT step is to balance the _____________. A. power factor B. voltage load C. kilowatt load D. ampere load

Last Answer : Answer: C

When troubleshooting a console circuit card suspected of being faulty, the last step would be to _______________. A. check the fuses and voltage levels of all power supplies in the console B. clean dust and debris from the card and burnish the sliding connections C. make sure all connections are tight including wire wrappings and push-on types D. substitute a new or repaired spare card and check the operation of the circuit

Description : When troubleshooting a console circuit card suspected of being faulty, the last step would be to _______________. A. check the fuses and voltage levels of all power supplies in the console B. clean dust ... -on types D. substitute a new or repaired spare card and check the operation of the circuit

Last Answer : Answer: D

Normally, the FIRST step in troubleshooting a transistor circuit card is to _____________. A. carefully remove the transistors from the card B. give the circuit an initial test with a signal generator C. test for continuity with a low voltage DC supply D. visually inspect the card

Description : Normally, the FIRST step in troubleshooting a transistor circuit card is to _____________. A. carefully remove the transistors from the card B. give the circuit an initial test with a signal generator C. test for continuity with a low voltage DC supply D. visually inspect the card

Last Answer : Answer: D

When troubleshooting electronic equipment, the FIRST step to be taken before testing the circuit voltage is to _________. A. set the meter to the lowest range B. check the voltage supply from the power source C. remove the suspected component D. check the current flow through the circuit

Description : When troubleshooting electronic equipment, the FIRST step to be taken before testing the circuit voltage is to _________. A. set the meter to the lowest range B. check the voltage supply from the power source C. remove the suspected component D. check the current flow through the circuit

Last Answer : Answer: B

A unit step voltage is applied at t = 0 to a series RL circuit with zero initial conditions

Description : A unit step voltage is applied at t = 0 to a series RL circuit with zero initial conditions  A) It is possible for the current to be oscillatory B) The voltage across the resistor at t ... The energy stored in the inductor in the steady state is zero D) Theresistor current eventually falls to zero 

Last Answer : A

A step voltage E is applied to a series R-L circuit. The rate of change of current is maximum at t = _:

Description : A step voltage E is applied to a series R-L circuit. The rate of change of current is maximum at t = _:  (1) Zero (2) Infinity (3) L/R (4) R/L 

Last Answer : A step voltage E is applied to a series R-L circuit. The rate of change of current is maximum at t = Zero.

The battery has following three major functions to perform: a) To provide a source of current for engine starting, lighting and use of horn. b) To help control the voltage in the electrical system. c) To store the current produced by dynamo/alternator and to furnish the current d) all of the above. Ans. d

Description : The battery has following three major functions to perform: a) To provide a source of current for engine starting, lighting and use of horn. b) To help control the voltage in the electrical system. c ... the current produced by dynamo/alternator and to furnish the current d) all of the above. Ans. d

Last Answer : ans d

Capacitors and inductors are commonly used in circuits. Capacitors store electrical energy in the electric field between their plates. How do inductors store energy?

Description : Capacitors and inductors are commonly used in circuits. Capacitors store electrical energy in the electric field between their plates. How do inductors store energy?

Last Answer : ANSWER: IN A MAGNETIC FIELD SURROUNDING THE INDUCTOR 

Write down the expression for the average output voltage for step down and step up chopper.

Description : Write down the expression for the average output voltage for step down and step up chopper.

Last Answer : Average output voltage for step down chopper is VO= αVS. Average output voltage for step up chopper is VO= αVSx [1/ ( 1- α)].

Write down the expression for average output voltage for step up chopper.

Description : Write down the expression for average output voltage for step up chopper.

Last Answer : Average output voltage for step down chopper V0= Vs, αis the duty cycle 1- α

If output voltage is greater than input voltage, then transformer is A. step up B. step down C. faulty D. fatal

Description : If output voltage is greater than input voltage, then transformer is A. step up B. step down C. faulty D. fatal

Last Answer :  step up

Instrument used to store the electric charge is known by which name? -Do You Know?

Description : Instrument used to store the electric charge is known by which name? -Do You Know?

Last Answer : answer:

The device which is used to store the electric charge is called

Description : The device which is used to store the electric charge is called

Last Answer : Capacitor

Instrument used to store the electric charge is known by which name?

Description : Instrument used to store the electric charge is known by which name?

Last Answer : Capacitor

Regarding an AC generator connected to the main electrical bus; as the electric load and power factor vary, a corresponding change is reflected in the generator armature reaction. These changes in armature reaction are compensated for by the __________ A. governor speed droop setting B. voltage regulator C. balance coil D. phase-balance relay

Description : Regarding an AC generator connected to the main electrical bus; as the electric load and power factor vary, a corresponding change is reflected in the generator armature reaction. These changes in ... . governor speed droop setting B. voltage regulator C. balance coil D. phase-balance relay

Last Answer : Answer: B

The charge build up in a capacitor is due to a) Conduction current density b) Displacement current density c) Polarisation d) Magnetization

Description : The charge build up in a capacitor is due to a) Conduction current density b) Displacement current density c) Polarisation d) Magnetization

Last Answer : b) Displacement current density

The charge build up in the capacitor is due to which quantity? a) Conduction current b) Displacement current c) Convection current d) Direct current

Description : The charge build up in the capacitor is due to which quantity? a) Conduction current b) Displacement current c) Convection current d) Direct current

Last Answer : d) Direct current

In an electric field, energy per unit positive charge is A. voltage B. current C. frequencyD. resistance

Description : In an electric field, energy per unit positive charge is A. voltage B. current C. frequency D. resistance

Last Answer : voltage

What two way where the water vapour changes as it passes down the glass tube in the condenser?

Description : What two way where the water vapour changes as it passes down the glass tube in the condenser?

Last Answer : Feel Free to Answer

Explain two pass down flow surface condenser with a neat sketch.

Description : Explain two pass down flow surface condenser with a neat sketch.

Last Answer : Two pass down flow surface condenser: It consists of horizontal cast iron cylindrical vessel pack with tubes, through which the cooling water flows. The ends of the condenser are cut off by vertical ... convert into water; therefore whole condensate can be the reused in the boiler.