Air is completely removed from an electric bulb to prevent (a) oxidation of tungsten filament (b) bursting of the bulb (c) loss of light due to absorption (d) none of these

Air is completely removed from an electric bulb to prevent (a) oxidation of tungsten filament (b) bursting of the bulb (c) loss of light due to absorption (d) none of these
by

1 Answer

Answer :

Ans:(a)  
by
selected

Related questions

Consider the following statements: 1. when an electric bulb is switched on, the resistance of its tungsten filament increases. 2. the resistance of pure metals increases on heating. Which of the above statements is/are correct? (a) Both 1 and 2 (b) only 1 (c) only 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. when an electric bulb is switched on, the resistance of its tungsten filament increases. 2. the resistance of pure metals increases on heating. Which of the above statements is/are correct? (a) Both 1 and 2 (b) only 1 (c) only 2 (d) Neither 1 nor 2

Last Answer : Ans:(a)

An electric bulb has a filament made of (a) Copper (b) Iron (c) Lead (d) Tungsten

Description : An electric bulb has a filament made of (a) Copper (b) Iron (c) Lead (d) Tungsten

Last Answer : Ans:(d)

Why is the filament of electric bulb made of tungsten ?

Description : Why is the filament of electric bulb made of tungsten ?

Last Answer : When electricity flows through the coil or filament of the thin wire of the bulb, it becomes very hot and radiates all around. Tungsten is a metal with the highest melting point and the highest tensile strength, making it a filament to make the bulb more durable.

The filament of electric bulb is made of (1) Iron (2) Nichrome (3) Tungsten (4) Graphite

Description : The filament of electric bulb is made of (1) Iron (2) Nichrome (3) Tungsten (4) Graphite

Last Answer : (3) Tungsten Explanation: The filament is the part of the light bulb that produces light. Filaments in incandescent light bulbs are made of tungsten.

Tungsten is used for the manufacture of the filament of an electric bulb, because – (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Description : Tungsten is used for the manufacture of the filament of an electric bulb, because – (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Last Answer : (4) It has a very high melting point Explanation: Tungsten is used because it has the highest melting point of all the metallic elements. It melts at 3410 degrees Celsius. When current passes ... bulb. The first successful light bulb filaments were made of carbon (from carbonized paper or bamboo).

The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Description : The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Last Answer : (4) Tungsten Explanation: An incandescent light bulb, incandescent lamp or incandescent light globe is an electric light which produces light with a filament wire heated to a high temperature by an electric ... through it, until it glows. Tungsten, also known as wolfram, is a chemical element.

For the filament of electric bulb tungsten is used because

Description : For the filament of electric bulb tungsten is used because

Last Answer : Its Melting point is very high

The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Description : The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Last Answer : Tungsten

Tungsten is used for the manufacture of the filament of an electric bulb, because (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Description : Tungsten is used for the manufacture of the filament of an electric bulb, because (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Last Answer : It has a very high melting point

After long periods of use, a gray spot develops on the inside of a bulb. This is because of: A. The tungsten filament evaporates and collects there B. The heat of the bulb scorches the glass at the top C. Dust inside the bulb condenses on the top D. Glass undergoes a change due to the heat

Description : After long periods of use, a gray spot develops on the inside of a bulb. This is because of: A. The tungsten filament evaporates and collects there B. The heat of the bulb scorches the glass at the top C. Dust inside the bulb condenses on the top D. Glass undergoes a change due to the heat

Last Answer : ANSWER: A

After long periods of use, a grey spot develops on the inside of a bulb. This is because – (1) the tungsten filament evaporates and collects there (2) the heat of the bulb scorches the glass at the top (3) dust inside the bulb condenses on the top (4) glass undergoes a change due to the heat

Description : After long periods of use, a grey spot develops on the inside of a bulb. This is because – (1) the tungsten filament evaporates and collects there (2) the heat of the bulb scorches the glass at the top (3) dust inside the bulb condenses on the top (4) glass undergoes a change due to the heat

Last Answer : (3) dust inside the bulb condenses on the top Explanation: At high operating temperatures, tungsten evaporates from the filament and gradually forms a gray film on the inside of the bulb. The inert ... spot develops in the filament. When this happens, the filament will break and the bulb fails.

After long periods of use, a grey spot develops on the inside of a bulb. This is because (1) the tungsten filament evaporates and collects there (2) the heat of the bulb scorches the glass at the top (3) dust inside the bulb condenses on the top (4) glass undergoes a change due to the heat

Description : After long periods of use, a grey spot develops on the inside of a bulb. This is because (1) the tungsten filament evaporates and collects there (2) the heat of the bulb scorches the glass at the top (3) dust inside the bulb condenses on the top (4) glass undergoes a change due to the heat

Last Answer : dust inside the bulb condenses on the top

Circuit diagram at tungsten filament bulb

Description : Circuit diagram at tungsten filament bulb

Last Answer : Circuit diagram at tungsten filament bulb

In order to prevent the hot metal filament from getting burnt, when the electric current is switched on, the bulb is filled with

Description : In order to prevent the hot metal filament from getting burnt, when the electric current is switched on, the bulb is filled with

Last Answer : In order to prevent the hot metal filament from getting burnt, when the electric current is switched on, the bulb is ... gas C. `CO_(2)` D. `Cl_(2)`

The element used in an electric filament is (a) Copper (b) Aluminium (c) Iron (d) Tungsten

Description : The element used in an electric filament is (a) Copper (b) Aluminium (c) Iron (d) Tungsten

Last Answer : Ans:(d)

The material used in the filament of electric bulbs is (A) Nichrome (B) Tungsten (C) Constantan (D) German silver

Description : The material used in the filament of electric bulbs is (A) Nichrome (B) Tungsten (C) Constantan (D) German silver

Last Answer : (B) Tungsten

In a filament type light bulb most of the electric power consumed appears as – (1) visible light (2) infra-red rays (3) ultra-violet rays (4) fluorescent light

Description : In a filament type light bulb most of the electric power consumed appears as – (1) visible light (2) infra-red rays (3) ultra-violet rays (4) fluorescent light

Last Answer : (2) infra-red rays Explanation: When electricity is passed through the filament, the filament gets hot. Depending on the temperature of the filament, radiation is emitted from the filament. The ... energy converts into visible light and rest of it is emitted as heat or infrared radiation.

In a Filament type Light bulb most of the electric power consumed appear as

Description : In a Filament type Light bulb most of the electric power consumed appear as

Last Answer : Infrared rays

In a filament type light bulb most of the electric power consumed appears as (1) visible light (2) infra-red rays (3) ultra-violet rays (4) fluorescent light

Description : In a filament type light bulb most of the electric power consumed appears as (1) visible light (2) infra-red rays (3) ultra-violet rays (4) fluorescent light

Last Answer : infra-red rays

By what process is heat transmitted from the filament of an evacuated electric bulb to the glass? (a) Conduction (b) Convection (c) Radiation (d) Heat cannot be transmitted through vacuum

Description : By what process is heat transmitted from the filament of an evacuated electric bulb to the glass? (a) Conduction (b) Convection (c) Radiation (d) Heat cannot be transmitted through vacuum

Last Answer : Ans:(c)

The filament of an electric bulb is made of which metal? -General Knowledge

Description : The filament of an electric bulb is made of which metal? -General Knowledge

Last Answer : The answer is 'Tungsten'

The filament of an electric bulb is made of which metal? -General Knowledge

Description : The filament of an electric bulb is made of which metal? -General Knowledge

Last Answer : answer:

Filament of electric bulb is made of which metal ?

Description : Filament of electric bulb is made of which metal ?

Last Answer : The filament of an electric bulb is made of tungsten metal.

The filament of an electric bulb is made of which metal

Description : The filament of an electric bulb is made of which metal

Last Answer : Tungsten

The filament of electric bulb is made up o

Description : The filament of electric bulb is made up o

Last Answer : Tungsten

The filament of an electric bulb is made of which metal?

Description : The filament of an electric bulb is made of which metal?

Last Answer : Tungsten

The filament of an electric bulb is made of?

Description : The filament of an electric bulb is made of?

Last Answer : The filament of an electric bulb is made of tungsten.

What two properties of the metal tungsten that make it good material for the filament?

Description : What two properties of the metal tungsten that make it good material for the filament?

Last Answer : Magnesium and Titanium.

Neon gas is (A) Flammable in nature (B) Used in color discharge tube (C) Filled in lamps having tungsten filament (D) All (A), (B) and (C)

Description : Neon gas is (A) Flammable in nature (B) Used in color discharge tube (C) Filled in lamps having tungsten filament (D) All (A), (B) and (C)

Last Answer : (B) Used in color discharge tube

How many wires are normally connected to a double- filament light bulb?

Description : How many wires are normally connected to a double- filament light bulb?

Last Answer : 5

Why a bulb with a filament gives off light?

Description : Why a bulb with a filament gives off light?

Last Answer : Electricity goes through the filament in the bulb.The filament is made of a material that is not a good conductor and therefore offers "resistance" to the electricity going through it.The "resistance" results ... hot, then very hot.The filament gets so hot that it starts to glow, giving off light.

Is the filament resistance lower or higher in a 500 watt light bulb than in a 100 watt light? Assume that both bulbs have been designed to operate at 110 volts.

Description : Is the filament resistance lower or higher in a 500 watt light bulb than in a 100 watt light? Assume that both bulbs have been designed to operate at 110 volts. 

Last Answer : ANSWER: LOWER

In heating frozen foods in sealed pouches in microwaves, why do you first poke holes in the pouch? (1) To prevent the steam pres-sure from bursting open the pouch (2) To allow the heat to get into the food through the hole (3) To allow the microwaves to get into the food through the holes (4) To allow the aroma of the food to come out through the holes

Description : In heating frozen foods in sealed pouches in microwaves, why do you first poke holes in the pouch? (1) To prevent the steam pres-sure from bursting open the pouch (2) To allow the heat to get into ... into the food through the holes (4) To allow the aroma of the food to come out through the holes

Last Answer : (1) To prevent the steam pres-sure from bursting open the pouch Explanation: Anything in a tight skin or shell can explode in a microwave because the water inside can expand and burst through. It ... of shells and holes should be poked in the plastic wrap or sealed pouches of frozen packaged foods.

In heating frozen foods in sealed pouches in a microwaves, why do you first poke holes in the pouch? (1) To prevent the steam pressure from bursting open the pouch (2) To allow the heat to get into the food through the hole (3) To allow the microwaves to get into the food through the holes (4) To allow the aroma of the food to come out through the holes

Description : In heating frozen foods in sealed pouches in a microwaves, why do you first poke holes in the pouch? (1) To prevent the steam pressure from bursting open the pouch (2) To allow the heat to get into ... into the food through the holes (4) To allow the aroma of the food to come out through the holes

Last Answer : To prevent the steam pressure from bursting open the pouch

The filament of a bulb is made up of -General Knowledge

Description : The filament of a bulb is made up of -General Knowledge

Last Answer : answer:

Will the filament resistance of a bulb be higher at normal temperature or in incandescent condition ?

Description : Will the filament resistance of a bulb be higher at normal temperature or in incandescent condition ?

Last Answer : As the resistance increases with increasing temperature, the resistance of the filament of the bulb will be higher than the normal temperature.

A filament bulb `(500 W, 100 V)` is to be used in a `230 V` main supply. When a resistance `R` is connected in series, it works perfectly and the bulb

Description : A filament bulb `(500 W, 100 V)` is to be used in a `230 V` main supply. When a resistance `R` is connected in series, it works perfectly and the bulb

Last Answer : A filament bulb `(500 W, 100 V)` is to be used in a `230 V` main supply. When a resistance `R` is ... Omega` B. `46 Omega` C. `26Omega` D. `13 Omega`

What is the status of a bulb with a broken filament?

Description : What is the status of a bulb with a broken filament?

Last Answer : With a broken filament, the bulb is dead. It needs to be replaced with a new bulb.

If the filament of the bulb is broken would the circuit be complete?

Description : If the filament of the bulb is broken would the circuit be complete?

Last Answer : If the bulb's filament is broken, the whole circuit becomes open. If the bulb is in a series circuit or is the only bulb, the electricity would no longer flow. If the bulb is in a parallel circuit, along with other bulbs, then only the blown bulb would go out, and the other bulbs would still work.

There are three bulbs of 60W 100W and 200W which bulb has thickest filament. a. 100W b. 200W c. 60W d. All

Description : There are three bulbs of 60W 100W and 200W which bulb has thickest filament. a. 100W b. 200W c. 60W d. All

Last Answer : b. 200W

Which one of the following materials is useful for making bulb filaments? a. aluminum b. Iron c. Copper d. Tungsten

Description : Which one of the following materials is useful for making bulb filaments? a. aluminum b. Iron c. Copper d. Tungsten

Last Answer : a. aluminum

When an electric bulb breaks, there is a mild bang due to (a) the chemical reaction between the enclosed gases (b) the compressed gases rushing out suddenly (c) the air rushing in to fill the evacuated space (d) some other unknown reason

Description : When an electric bulb breaks, there is a mild bang due to (a) the chemical reaction between the enclosed gases (b) the compressed gases rushing out suddenly (c) the air rushing in to fill the evacuated space (d) some other unknown reason

Last Answer : Ans:(c)

Water hammer in a pipeline results from the (A) Bursting of pipelines due to closure by a valve (B) Rapid pressure change due to a rapid change in the rate of flow (C) Pressure increase due to closure of a valve resulting in decrease in rate of flow (D) None of these

Description : Water hammer in a pipeline results from the (A) Bursting of pipelines due to closure by a valve (B) Rapid pressure change due to a rapid change in the rate of flow (C) Pressure increase due to closure of a valve resulting in decrease in rate of flow (D) None of these

Last Answer : (B) Rapid pressure change due to a rapid change in the rate of flow

When applying to pressure ratings listed in ASME B16.5 at high or low temperatures which of the following must be considered? a) Risk of leakage due to forces and moments developed. b) Bursting of the flanged fitting. c) The bolting forces at the flange. d) All of the above.

Description : When applying to pressure ratings listed in ASME B16.5 at high or low temperatures which of the following must be considered? a) Risk of leakage due to forces and moments developed. b) Bursting of the flanged fitting. c) The bolting forces at the flange. d) All of the above.

Last Answer : a) Risk of leakage due to forces and moments developed.

Light bulbs are bursting in the apartment almost daily

Description : It has never done that before. Previously, a light bulb burst, for example, once every two years. It's almost two days now. They crack all over the apartment. What can it be?

Last Answer : Either you are using some "low quality" light bulbs or there is an overvoltage in the network. You can try to ask your neighbors if they have similar problems, but they will probably have no choice but to contact the electricity distributor to check the voltage.

Loss due to the diffraction of light when it strikes on the irregularities formed during the manufacturing process of the fiber optics. A. Absorption loss B. Attenuation C. Bending loss D. Rayleigh scattering loss

Description : Loss due to the diffraction of light when it strikes on the irregularities formed during the manufacturing process of the fiber optics. A. Absorption loss B. Attenuation C. Bending loss D. Rayleigh scattering loss

Last Answer : D. Rayleigh scattering loss

The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Description : The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Last Answer : Ans:(b)

Calculate the number of free electrons passing through the filament of an electric lamp in one hour when the current through the filament is 0.32 A.

Description : Calculate the number of free electrons passing through the filament of an electric lamp in one hour when the current through the filament is 0.32 A.

Last Answer : Calculate the number of free electrons passing through the filament of an electric lamp in one hour when the current through the filament is 0.32 A.

Full form of CFL used in place of electric bulbs is – (1) compact fluorescent lamp (2) constantan filament lamp (3) closed filament lamp (4) closed fluorescent lamp

Description : Full form of CFL used in place of electric bulbs is – (1) compact fluorescent lamp (2) constantan filament lamp (3) closed filament lamp (4) closed fluorescent lamp

Last Answer : (1) compact fluorescent lamp Explanation: A compact fluorescent lamp (CFL) is a fluorescent lamp designed to replace an incandescent lamp; some types fit into light fixtures formerly used for incandescent lamps.

Full form of CFL used in place of electric bulbs is (1) compact fluorescent lamp (2) constantan filament lamp (3) closed filament lamp (4) closed fluorescent lamp

Description : Full form of CFL used in place of electric bulbs is (1) compact fluorescent lamp (2) constantan filament lamp (3) closed filament lamp (4) closed fluorescent lamp

Last Answer : compact fluorescent lamp