Why a bulb with a filament gives off light?

Why a bulb with a filament gives off light?
by

1 Answer

Answer :

Electricity goes through the filament in the bulb.The filament is made of a material that is not a good conductor and therefore offers "resistance" to the electricity going through it.The "resistance" results in the filament is a form of friction to the electric current.The electrical friction results in the wire getting warm, then hot, then very hot.The filament gets so hot that it starts to glow, giving off light.
by

Related questions

How many wires are normally connected to a double- filament light bulb?

Description : How many wires are normally connected to a double- filament light bulb?

Last Answer : 5

Air is completely removed from an electric bulb to prevent (a) oxidation of tungsten filament (b) bursting of the bulb (c) loss of light due to absorption (d) none of these

Description : Air is completely removed from an electric bulb to prevent (a) oxidation of tungsten filament (b) bursting of the bulb (c) loss of light due to absorption (d) none of these

Last Answer : Ans:(a)

In a filament type light bulb most of the electric power consumed appears as – (1) visible light (2) infra-red rays (3) ultra-violet rays (4) fluorescent light

Description : In a filament type light bulb most of the electric power consumed appears as – (1) visible light (2) infra-red rays (3) ultra-violet rays (4) fluorescent light

Last Answer : (2) infra-red rays Explanation: When electricity is passed through the filament, the filament gets hot. Depending on the temperature of the filament, radiation is emitted from the filament. The ... energy converts into visible light and rest of it is emitted as heat or infrared radiation.

In a Filament type Light bulb most of the electric power consumed appear as

Description : In a Filament type Light bulb most of the electric power consumed appear as

Last Answer : Infrared rays

Is the filament resistance lower or higher in a 500 watt light bulb than in a 100 watt light? Assume that both bulbs have been designed to operate at 110 volts.

Description : Is the filament resistance lower or higher in a 500 watt light bulb than in a 100 watt light? Assume that both bulbs have been designed to operate at 110 volts. 

Last Answer : ANSWER: LOWER

In a filament type light bulb most of the electric power consumed appears as (1) visible light (2) infra-red rays (3) ultra-violet rays (4) fluorescent light

Description : In a filament type light bulb most of the electric power consumed appears as (1) visible light (2) infra-red rays (3) ultra-violet rays (4) fluorescent light

Last Answer : infra-red rays

The filament of an electric bulb is made of which metal? -General Knowledge

Description : The filament of an electric bulb is made of which metal? -General Knowledge

Last Answer : The answer is 'Tungsten'

The filament of an electric bulb is made of which metal? -General Knowledge

Description : The filament of an electric bulb is made of which metal? -General Knowledge

Last Answer : answer:

The filament of a bulb is made up of -General Knowledge

Description : The filament of a bulb is made up of -General Knowledge

Last Answer : answer:

Filament of electric bulb is made of which metal ?

Description : Filament of electric bulb is made of which metal ?

Last Answer : The filament of an electric bulb is made of tungsten metal.

Why is the filament of electric bulb made of tungsten ?

Description : Why is the filament of electric bulb made of tungsten ?

Last Answer : When electricity flows through the coil or filament of the thin wire of the bulb, it becomes very hot and radiates all around. Tungsten is a metal with the highest melting point and the highest tensile strength, making it a filament to make the bulb more durable.

Will the filament resistance of a bulb be higher at normal temperature or in incandescent condition ?

Description : Will the filament resistance of a bulb be higher at normal temperature or in incandescent condition ?

Last Answer : As the resistance increases with increasing temperature, the resistance of the filament of the bulb will be higher than the normal temperature.

In order to prevent the hot metal filament from getting burnt, when the electric current is switched on, the bulb is filled with

Description : In order to prevent the hot metal filament from getting burnt, when the electric current is switched on, the bulb is filled with

Last Answer : In order to prevent the hot metal filament from getting burnt, when the electric current is switched on, the bulb is ... gas C. `CO_(2)` D. `Cl_(2)`

A filament bulb `(500 W, 100 V)` is to be used in a `230 V` main supply. When a resistance `R` is connected in series, it works perfectly and the bulb

Description : A filament bulb `(500 W, 100 V)` is to be used in a `230 V` main supply. When a resistance `R` is connected in series, it works perfectly and the bulb

Last Answer : A filament bulb `(500 W, 100 V)` is to be used in a `230 V` main supply. When a resistance `R` is ... Omega` B. `46 Omega` C. `26Omega` D. `13 Omega`

What is the status of a bulb with a broken filament?

Description : What is the status of a bulb with a broken filament?

Last Answer : With a broken filament, the bulb is dead. It needs to be replaced with a new bulb.

If the filament of the bulb is broken would the circuit be complete?

Description : If the filament of the bulb is broken would the circuit be complete?

Last Answer : If the bulb's filament is broken, the whole circuit becomes open. If the bulb is in a series circuit or is the only bulb, the electricity would no longer flow. If the bulb is in a parallel circuit, along with other bulbs, then only the blown bulb would go out, and the other bulbs would still work.

The filament of an electric bulb is made of which metal

Description : The filament of an electric bulb is made of which metal

Last Answer : Tungsten

After long periods of use, a gray spot develops on the inside of a bulb. This is because of: A. The tungsten filament evaporates and collects there B. The heat of the bulb scorches the glass at the top C. Dust inside the bulb condenses on the top D. Glass undergoes a change due to the heat

Description : After long periods of use, a gray spot develops on the inside of a bulb. This is because of: A. The tungsten filament evaporates and collects there B. The heat of the bulb scorches the glass at the top C. Dust inside the bulb condenses on the top D. Glass undergoes a change due to the heat

Last Answer : ANSWER: A

Consider the following statements: 1. when an electric bulb is switched on, the resistance of its tungsten filament increases. 2. the resistance of pure metals increases on heating. Which of the above statements is/are correct? (a) Both 1 and 2 (b) only 1 (c) only 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. when an electric bulb is switched on, the resistance of its tungsten filament increases. 2. the resistance of pure metals increases on heating. Which of the above statements is/are correct? (a) Both 1 and 2 (b) only 1 (c) only 2 (d) Neither 1 nor 2

Last Answer : Ans:(a)

An electric bulb has a filament made of (a) Copper (b) Iron (c) Lead (d) Tungsten

Description : An electric bulb has a filament made of (a) Copper (b) Iron (c) Lead (d) Tungsten

Last Answer : Ans:(d)

By what process is heat transmitted from the filament of an evacuated electric bulb to the glass? (a) Conduction (b) Convection (c) Radiation (d) Heat cannot be transmitted through vacuum

Description : By what process is heat transmitted from the filament of an evacuated electric bulb to the glass? (a) Conduction (b) Convection (c) Radiation (d) Heat cannot be transmitted through vacuum

Last Answer : Ans:(c)

After long periods of use, a grey spot develops on the inside of a bulb. This is because – (1) the tungsten filament evaporates and collects there (2) the heat of the bulb scorches the glass at the top (3) dust inside the bulb condenses on the top (4) glass undergoes a change due to the heat

Description : After long periods of use, a grey spot develops on the inside of a bulb. This is because – (1) the tungsten filament evaporates and collects there (2) the heat of the bulb scorches the glass at the top (3) dust inside the bulb condenses on the top (4) glass undergoes a change due to the heat

Last Answer : (3) dust inside the bulb condenses on the top Explanation: At high operating temperatures, tungsten evaporates from the filament and gradually forms a gray film on the inside of the bulb. The inert ... spot develops in the filament. When this happens, the filament will break and the bulb fails.

The filament of electric bulb is made of (1) Iron (2) Nichrome (3) Tungsten (4) Graphite

Description : The filament of electric bulb is made of (1) Iron (2) Nichrome (3) Tungsten (4) Graphite

Last Answer : (3) Tungsten Explanation: The filament is the part of the light bulb that produces light. Filaments in incandescent light bulbs are made of tungsten.

Tungsten is used for the manufacture of the filament of an electric bulb, because – (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Description : Tungsten is used for the manufacture of the filament of an electric bulb, because – (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Last Answer : (4) It has a very high melting point Explanation: Tungsten is used because it has the highest melting point of all the metallic elements. It melts at 3410 degrees Celsius. When current passes ... bulb. The first successful light bulb filaments were made of carbon (from carbonized paper or bamboo).

The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Description : The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Last Answer : (4) Tungsten Explanation: An incandescent light bulb, incandescent lamp or incandescent light globe is an electric light which produces light with a filament wire heated to a high temperature by an electric ... through it, until it glows. Tungsten, also known as wolfram, is a chemical element.

For the filament of electric bulb tungsten is used because

Description : For the filament of electric bulb tungsten is used because

Last Answer : Its Melting point is very high

The filament of electric bulb is made up o

Description : The filament of electric bulb is made up o

Last Answer : Tungsten

The filament of an electric bulb is made of which metal?

Description : The filament of an electric bulb is made of which metal?

Last Answer : Tungsten

There are three bulbs of 60W 100W and 200W which bulb has thickest filament. a. 100W b. 200W c. 60W d. All

Description : There are three bulbs of 60W 100W and 200W which bulb has thickest filament. a. 100W b. 200W c. 60W d. All

Last Answer : b. 200W

After long periods of use, a grey spot develops on the inside of a bulb. This is because (1) the tungsten filament evaporates and collects there (2) the heat of the bulb scorches the glass at the top (3) dust inside the bulb condenses on the top (4) glass undergoes a change due to the heat

Description : After long periods of use, a grey spot develops on the inside of a bulb. This is because (1) the tungsten filament evaporates and collects there (2) the heat of the bulb scorches the glass at the top (3) dust inside the bulb condenses on the top (4) glass undergoes a change due to the heat

Last Answer : dust inside the bulb condenses on the top

The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Description : The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Last Answer : Tungsten

Tungsten is used for the manufacture of the filament of an electric bulb, because (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Description : Tungsten is used for the manufacture of the filament of an electric bulb, because (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Last Answer : It has a very high melting point

Circuit diagram at tungsten filament bulb

Description : Circuit diagram at tungsten filament bulb

Last Answer : Circuit diagram at tungsten filament bulb

The filament of an electric bulb is made of?

Description : The filament of an electric bulb is made of?

Last Answer : The filament of an electric bulb is made of tungsten.

What is a threadlike wire that gives off light in an electric light bulb that starts with f?

Description : What is a threadlike wire that gives off light in an electric light bulb that starts with f?

Last Answer : Need answer

there are 3 light bulbs in three seperate rooms. in front of you, there is a panel with 3 seperate switches. they only turn on or off. you may look inside each room only once. how can you tell which bulb belongs to which switch? -Riddles

Description : there are 3 light bulbs in three seperate rooms. in front of you, there is a panel with 3 seperate switches. they only turn on or off. you may look inside each room only once. how can you tell which bulb belongs to which switch? -Riddles

Last Answer : you turn on any two switches, leave them for a few minutes, and turn one off. you enter each room only once. you know that the lightbulb that is lit beongs to the switch that was left on, the ... hot, belongs to the switch you turned off, and the cold bulb belongs to the switch you never touched.

There are 100 light bulbs lined up in a row in a long room. Each bulb has its own switch and is currently switched off. The room has an entry door and an exit door. There are 100 people lined up outside the entry door. Each bulb is numbered consecutively from 1 to 100. So is each person. Person No. 1 enters the room, switches on every bulb, and exits. Person No. 2 enters and flips the switch on every second bulb (turning off bulbs 2, 4, 6, ...). Person No. 3 enters and flips the switch on every third bulb (changing the state on bulbs 3, 6, 9, ...). This continues until all 100 people have passed through the room. What is the final state of bulb No. 64? And how many of the light bulbs are illuminated after the 100th person has passed through the room? -Riddles

Description : There are 100 light bulbs lined up in a row in a long room. Each bulb has its own switch and is currently switched off. The room has an entry door and an exit door. There are 100 people ... And how many of the light bulbs are illuminated after the 100th person has passed through the room? -Riddles

Last Answer : First think who will operate each bulb, obviously person #2 will do all the even numbers, and say person #10 will operate all the bulbs that end in a zero. So who would operate for example bulb 48: Persons numbered: 1 & 48 ... 100 (1, 4, 9, 16, 25, 36, 49, 64, 81 & 100) hence 10 bulbs remain on.

There is a lamp inside a photography darkroom. When the darkroom door is closed, it is impossible to tell from outside the room whether or not the lamp is on. There are two switches outside the door of the darkroom. One or both of the switches may control the lamp. It also could be that neither of the switches control the lamp. All you know is that the light bulb is currently off and that the lamp and bulb are in working condition. The darkroom door is closed and once you open the door you cannot touch either of the switches. If you can only open the dark-room door one time, how can you tell which switches, if any, control the lamp? -Riddles

Description : There is a lamp inside a photography darkroom. When the darkroom door is closed, it is impossible to tell from outside the room whether or not the lamp is on. There are two switches outside the door of ... dark-room door one time, how can you tell which switches, if any, control the lamp? -Riddles

Last Answer : Turn the first switch on and leave it on for ten minutes. After ten minutes, turn that switch off and turn the second switch on. Open the darkroom door, and lightly (in case it is hot) touch the ... one controls the lamp. If the lamp is off, and the bulb is cool, neither switch controls the lamp.

How can I perform a light bulb replacement when the bulb broke off at the base?

Description : How can I perform a light bulb replacement when the bulb broke off at the base?

Last Answer : The best way to remove a blub that has broken off at the base is to use a raw potato. Cut the potato in half and, with the light switch turned off, shove the raw edge of the potato ... . Replace the bulb as you would normally after making sure all potato residue is removed from the light socket.

A frosted bulb which may be taken as an isotropic source, gives as illumination of `8lm//m^(2)` at a distance of 5m. Calculate (i) its luminous intens

Description : A frosted bulb which may be taken as an isotropic source, gives as illumination of `8lm//m^(2)` at a distance of 5m. Calculate (i) its luminous intens

Last Answer : A frosted bulb which may be taken as an isotropic source, gives as illumination of `8lm//m^(2)` ... and (ii) the total luminous flux from the blub.

What is filament of spirogyra?

Description : What is filament of spirogyra?

Last Answer : Spirogyra is a genus of green algae that is commonly found in freshwater environments such as ponds, streams, and ditches. The filament of Spirogyra is a long, slender, multicellular structure ... , which occurs when the filament breaks into individual cells that can grow into new filaments.

Approximately when did car makers stop using two headlights (and start using one with a high beam filament)?

Description : Approximately when did car makers stop using two headlights (and start using one with a high beam filament)?

Last Answer : I’m sure that I’ve seen late-model BMW and Chevy cars with separate high/low beam headlights. And I’ve seen models from the 1970s which had single-lamp assemblies with the high and low beam filaments built into the lamp, as you suggest.

What is filament of a flower? -Biology

Description : What is filament of a flower? -Biology

Last Answer : answer:

What is filament of a flower? -Biology

Description : What is filament of a flower? -Biology

Last Answer : answer:

whether axial filament in tail travels through its complete length or certain part? -Biology

Description : whether axial filament in tail travels through its complete length or certain part? -Biology

Last Answer : answer:

whether axial filament in tail travels through its complete length or certain part? -Biology

Description : whether axial filament in tail travels through its complete length or certain part? -Biology

Last Answer : answer:

what does the filament do in the flower?

Description : what does the filament do in the flower?

Last Answer : it holds up the anther so the insects get to it quickly also itdevelopes the pollen and everythin gels thats there and i just gootmy hair done and tis pretty i and i go to east and my name is jalenholla back

What is filament ?

Description : What is filament ?

Last Answer : : Inside the bulb is a thin tungsten wire coil attached to both ends of the wire. This is called filament.

What is the filament of a diode called ?

Description : What is the filament of a diode called ?

Last Answer : The two electrodes in a diode valve emit an electron , called a cathode or filament.

What is Filament ?

Description : What is Filament ?

Last Answer : Filament means penis.