Which of the following liquids is most viscous? (1) Oil (2) Milk (3) Water (4) Petrol

1 Answer

Answer :

Oil

Related questions

Description : Which of the following liquids is most viscous? (1) Oil (2) Milk (3) Water (4) petrol

Last Answer : (1) Oil Explanation: Informally, viscosity is the quantity that describes a fluid's resistance to flow. It is dependent on temperature. Viscosity of the different fluids (in cP) is as follows: Edible Oil: 20 to 60; Milk: approximately 1.0; Water: 0.894; and Petrol: around 0.82 to 0.95 cP.

Description : Which of the following liquids has the least density? (1) Fresh water (2) Salt water (3) Petrol (4) Mercury

Last Answer : (3) Petrol Explanation: Gasoline or petrol is a transparent, petroleum-derived liquid that is used primarily as a fuel in internal Combustion engines. It consists mostly of organic compounds obtained by the fractional distillation of petroleum, enhanced with a variety of additives.

Description : Which of the following liquids has the least density ? (1) Fresh water (2) Salt water (3) Petrol (4) Mercury

Last Answer : Petrol

Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes

Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution

Description : Liquids that evaporate quickly are known as _________ liquids. A. Viscous B. Transient C. Volatile D. Light

Last Answer : ANSWER: C

Description : Liquids that evaporate quickly are known as _________ liquids. A. Viscous B. Transient C. Volatile D. Light

Last Answer : ANSWER: C

Description : Petrolatum is (A) Same as petroleum ether (B) Petroleum coke (C) A mixture of microcrystalline wax in viscous hydrocarbon liquids (D) None of these

Last Answer : (C) A mixture of microcrystalline wax in viscous hydrocarbon liquids

Description : Highly viscous liquids & pastes are agitated by (A) Propellers (B) Turbine agitators (C) Multiple blade paddles (D) None of these

Last Answer : (C) Multiple blade paddles

Description : Helical screw agitator is used for (A) Mixing highly viscous pastes (B) Blending immiscible liquids (C) Mixing liquids at very high temperature (> 250 °C) (D) None of these

Last Answer : (A) Mixing highly viscous pastes

Description : Viscous & heat sensitive liquids are concentrated in __________ evaporators. (A) Open pan (B) Long tube (C) Agitated film (D) None of these

Last Answer : (C) Agitated film

Description : Which of the following forced convection heat transfer equation accounts for the liquid viscosity effect for viscous liquids? (A) Dittus-Boelter equation (B) Sieder-Tate equation (C) Nusselt equation (D) None of these

Last Answer : (B) Sieder-Tate equation

Description : Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Last Answer : (D) Boiling of a liquid on a hot surface

Description : Agitated film evaporator is suitable for concentrating __________ liquids. (A) Foaming (B) Viscous (C) Very thin (D) Corrosive

Last Answer : (B) Viscous

Description : The Euler's equation for the motion of liquids is based upon the assumption that (A) The fluid is non - viscous, homogeneous and incompressible (B) The velocity of flow is uniform over the section (C) The flow is continuous, steady and along the stream line (D) All of the above

Last Answer : Answer: Option D

Description : Explain with reason through which side of shell and tube heat exchanges, the following liquids are directed. (i) viscous liquid (ii) high pressure liquid (iii) corrosive liquid

Last Answer : Viscous liquid : Viscous liquid is passed through shell side Reason: because of the presence of baffles in the shell induce turbulence and hence increases heat transfer rate. High pressure liquid: High ... To avoid expensive alloy shells (in order to save the cost of expensive material for shell).

Description : When milk is churned, the cream separates from it clue to: (1) Frictional force (2) Centrifugal force (3) Gravitation al force (4) Viscous forces

Last Answer : (2) Centrifugal force Explanation: The extraction of cream happens because of the work of centrifugal force which works outward. The separation of cream from milk is based on the fact that when liquids ... . Milk can be regarded as two liquids of different specific gravities, the serum and the fat.

Description : When milk is churned, the cream separates from it due to: (1) Frictional force (2) Centrifugal force (3) Gravitational force (4) Viscous forces 

Last Answer : Centrifugal force

Description : Ail oil drop spreads over water because (1) oil is lighter than water (2) oil is more viscous (3) oil does not mix with water (4) surface tension of oil is much smaller than that of water

Last Answer : (4) surface tension of oil is much smaller than that of water Explanation: Surface tension is a contractive tendency of the surface of a liquid that allows it to resist an external force. It is ... is caused by cohesion of similar molecules, and is responsible for many of the behaviors of liquids.

Description : An oil drop spreads over water because (1) oil is lighter than water (2) oil is more viscous (3) oil does not mix with water (4) surface tension of oil is much smaller than that of water

Last Answer : surface tension of oil is much smaller than that of water

Description : On all instruments like measuring cylinder, pipette and burette, readings are always taken at the bottom of the meniscus of liquid. This is not true for liquids like A. Oil B. Ink C. Mercury D. Seawater

Last Answer : Mercury

Description : The commonly used thermometric substance is _____. (1) mineral oil (2) Alcohol (3) Mercury (4) Petrol

Last Answer : (3) Mercury Explanation: Thermometric liquids are used in thermometers to measure temperature. Mercury and alcohol are common thermometric liquids.

Description : A centrifugal pump designed to pump water is employed to pump a more viscous oil. In the later case, the pump (A) Develops a lower head (B) Capacity is reduced (C) Requires more power (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : The hygrometer is an instrument to measure (a) the relative density of liquids (b) the purity of milk (c) relative humidity (d) atmospheric pressure

Last Answer : Ans:(c)

Description : Hygrometer is used for measuring the ------? A. Speed of sound B. Density of milk C. Humidity of air (Answer) D. Specific gravity of liquids E. None of these

Last Answer : C. Humidity of air (Answer)

Description : LSHS is a type of furnace oil, which (A) Is more viscous than high viscosity furnace oil (HVFO) (B) Stands for low sulphur heavy stock (C) Is an ideal fuel for metallurgical furnaces due to its lower sulphur content (< 1%) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : A 30% (by volume) suspension of spherical sand particles in a viscous oil has a hindered settling velocity of 4.44 μm/s. If the Richardson Zaki hindered settling index is 4.5, then the terminal velocity of a sand grain is (A) 0.90 μm/s (B) 1 μm/s (C) 22.1 μm/s (D) 0.02 μm/s

Last Answer : (B) 1 μm/s

Description : Centrifugal pump can't be used to pump (A) Molten sodium (used as a coolant in Fast Breeder Reactor) (B) Moderately viscous vegetable oil used in soap industry (C) Thick molten soap at 80°C (D) None of the above

Last Answer : (C) Thick molten soap at 80°C

Description : Tall oil obtained as a by-product from the black liquor recovery is (A) A black, sticky & viscous liquid (B) Used in the manufacture of greases, emulsions & soaps (C) Composed mainly of rosin & fatty acids (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Description : Zinc is most soluble in which of the following liquids? w) Water x) Alchohol y) Mercury z) Oil

Last Answer : ANSWER: Y -- MERCURY

Description : The force which opposes the relative motion between different layers of liquid or gases is called – (1) Critical Velocity (2) Streamline Flow (3) Terminal Velocity (4) Viscous Force

Last Answer : (4) Viscous Force Explanation: Critical Velocity – The maximum velocity upto which fluid motion is streamline is called Critical Velocity. Streamline Flow – If velocity of all fluid particles is same all the time then it can be said in streamline flow.

Description : When the work done in moving a particle round a closed loop in a field is zero, the forces in the field are called A. Zero forces B. Non-Conservative forces C. Conservative forces D. Viscous forces

Last Answer : Conservative forces

Description : Due to energy dissipation by viscous forces in air, if simple harmonic variations of a pendulum die away after some time, then oscillation is said to be: A. undamped B. free C. damped D. dependent

Last Answer : damped

Description : Bernoulli's principle states that, for streamline motion of an incompressible non-viscous fluid: A. the pressure at any part + the kinetic energy per unit volume = constant B. the kinetic ... + the kinetic energy per unit volume + the potential energy per unit volume = constant

Last Answer : the pressure at any part + the kinetic energy per unit volume + the potential energy per unit volume = constant

Description : What liquids are miscible to oil?

Last Answer : Need answer

Description : Removal of __________ exemplifies an adsorption unit operation. (A) Uranium from its ore (B) Water from petrol (C) Ammonia from coke oven gas (D) Mustard oil from mustard seed

Last Answer : (B) Water from petro

Description : A boiler or steam generator is a device used to create steam by applying heat energy to _____. • Water • Petrol • Oil • All of the above

Last Answer : • Water

Description : Which of the following separates two liquids during convection ?

Last Answer : The semipermeable screen separates the two liquids during convection.

Description : Speed of sound is greater in solids than in liquids?

Last Answer : – Because the solids have high elasticity

Description : A drop of liquid assumes spherical shape because: (1) Intermolecular forces are strong in liquids (2) A sphere has the least surface area for a given volume (3) A sphere has the largest surface area for a given volume (4) Inter molecular forces are weak in liquids

Last Answer : (2) A sphere has the least surface area for a given volume Explanation: A drop of liquid assumes spherical shape because a sphere has the least surface area for a given volume.

Description : At boiling point of liquids, its : (1) Temperature increases (2) Atmospheric pressure increases (3) Timperature remains increases (4) Vapour pressure decreases

Last Answer : (3) Timperature remains increases

Description : A fountain pen works on the principle of (1) Flow of liquids from higher to lower potential (2) Capillary action (3) Bernoulli's principle (4) Viscosity of liquids

Last Answer : (2) Capillary action Explanation: A fountain pen is a nib pen that, unlike its predecessor the dip pen, contains an internal reservoir of water-based liquid ink. The pen draws ink from the ... to flow in narrow spaces without the assistance of, and in opposition to external forces like gravity.

Description : At boiling point of liquids, its – (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases

Last Answer : (3) Temperature remains constant Explanation: An interesting property of matter is that its temperature remains constant during a phase change, assuming its surrounding pressure is constant. A liquid changes into gaseous state at a constant temperature called its boiling point.

Description : The term "laminar flow" is most often associated with the description of: w) conduction of sound by waves x) current flow in transistors y) effects of viscosity of liquids z) passage of light rays through a liquid

Last Answer : ANSWER: Y -- EFFECTS OF VISCOSITY OF LIQUIDS

Description : The amount of heat required to change a boiling liquid to a gas at the same temperature depends on one of the following properties of the liquid. Does it depend on the liquid's: w) heat of fusion x) heat of vaporization y) temperature z) density

Last Answer : ANSWER: X -- HEAT OF VAPORIZATION

Description : At boiling point of liquids, its (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases 

Last Answer : Temperature remains constant

Description : A drop of liquid assumes spherical shape because: (1) Intermolecular forces are strong in liquids (2) A sphere has the least surface area for a given volume (3) A sphere has the largest surface area for a given volume (4) Inter molecular forces are weak in liquids

Last Answer : A sphere has the least surface area for a given volume

Description : A fountain pen works on the principle of (1) flow of liquids from higher to lower potential (2) capillary action (3) Bernoulli’s principle (4) Viscosity of liquids

Last Answer : capillary action

Description : what or where is the error? I feel more fuel and oil consumption feels more like water than oil thank you for the answer (here like) please for feedback from professionals who have experience with this

Last Answer : I see a problem with the AC pump gasoline is flowing through it

Description : The self-ignition temperature of diesel oil compared to petrol is a. higher b. lower c. same d. depends on the quality of fuel

Last Answer : ANSWER a. higher

Description : Gasoline is 1. Same as diesel oil 2. Same as petrol 3. Obtained from natural gas 4. Obtained from crude oil The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 4

Last Answer : Ans:(b)