Describe natural sampling with neat sketch.

Describe natural sampling with neat sketch.
by

1 Answer

Answer :

1. Natural Sampling or Chopper Sampling

Natural Sampling is a practical method of sampling in which pulse have finite width equal to T. Sampling is done in accordance with the carrier signal which is digital in nature.

image

With the help of functional diagram of a Natural sampler, a sampled signal g(t) is obtained by multiplication of sampling function c(t) and the input signal x(t). Spectrum of Natural Sampled Signal is given by: 

image

Natural Sampled Waveform

image

by

Related questions

Describe the working of an ADM transmitter with neat block diagram.

Description : Describe the working of an ADM transmitter with neat block diagram.

Last Answer : ADM transmitter Block diagram:- OR Working:- A DM system that adjusts its step size according to the information signal characteristics is called as Adaptive Delta ... result is an increase in step size and a reduction in slope-overload distortion as shown in figure

Describe North American (T-carrier) digital multiplexing hierarchy with neat diagram.

Description : Describe North American (T-carrier) digital multiplexing hierarchy with neat diagram.

Last Answer : Explanation:- T1 Carrier System T1 carrier systems were designed to combine PCM and TDM Techniques for the Transmission of 24 64Kbps channels with each channel Capable of Carrying ... 8064 64Kbps voice or data channels and transmit them at 560.16Mbps over a single coaxial cable.

State sampling theorem.

Description : State sampling theorem.

Last Answer : Sampling theorem: Sampling theorem states that a band-limited signal of finite energy having the highest frequency component fm Hz can be represented and recovered completely from a set of samples taken ... ≥ 2fm. Where, fs = sampling frequency  fm = maximum frequency of continuous original signal

Explain flat top sampling with circuit diagram.Draw flat top sampled signal.

Description : Explain flat top sampling with circuit diagram.Draw flat top sampled signal.

Last Answer : Flat top sampling: In flat top sampling, the top of the samples remains constant and equal to the instantaneous value of the modulating signal at the start of the sampling. Thus the ... the sampled signal and the pulse signal. Flat top sampling is mostly used in digital transmission

State sampling theorem. Define Nyquist rate.

Description : State sampling theorem. Define Nyquist rate.

Last Answer : SAMPLING THEOREM: Sampling theorem states that a band-limited signal of finite energy having the highest frequency component fm Hz can be represented and recovered completely from a set of samples taken ... frequency should be equal to or greater than twice the maximum signal frequency (fs≥ 2fm)

Describe slope overload and granular noise in DM system

Description : Describe slope overload and granular noise in DM system

Last Answer : SLOPE-OVERLOAD DISTORTION: If the slope of the analog signal x(t) is much higher (steep) than that of the approximated signal xq(t) over a long duration then xq(t) will not follow x(t) ... , the step size should be as small as possible. However, this will increase slope-overload distortion.

Describe PCM transmitter with block diagram.

Description : Describe PCM transmitter with block diagram.

Last Answer : OR Block diagram of PCM transmitter The analog signal x (t) is passes through band limiting / low pass filter, which has a cutoff frequency fc=W Hz. This will ensure x ... acts as clock signals for parallel to converter .the frequency f is adjusted to satisfy the criteria. 

Describe amplitude shift keying (ASK) modulation with suitable circuit diagram.

Description : Describe amplitude shift keying (ASK) modulation with suitable circuit diagram.

Last Answer : Explanation:- ASK MODULATOR: The process where a binary information signal directly modulates the amplitude of an analog carrier. The digital signal is used to switch the carrier between amplitude levels is ... Block diagram of ASK Transmitter / ASK modulator:-  Waveforms:- 

Explain with the help of block diagram, spread spectrum modulation system.

Description : Explain with the help of block diagram, spread spectrum modulation system.

Last Answer : SPREAD-SPECTRUM COMUNICATION SYSTEM  Baseband DS spread spectrum communication system model (a)transmitter (b) channel (c)receiver Explanation:- In actual DSSS system, the ... PN sequence pattern which the receiver will recognize in the presence of interference with high probability.

Explain TDM technique with relevant diagram.

Description : Explain TDM technique with relevant diagram. 

Last Answer : TIME DIVISION MULTIPLEXING (TDM): TDM is a digital multiplexing technique in which many signals are transmitted for very short time (time slot) over common transmission channel. Here each signal ... sample (or word) synchronization is necessary to properly separate the samples within each frame.

Explain digital communication system with the help of block diagram.

Description : Explain digital communication system with the help of block diagram.

Last Answer : Source coding:1In source coding the source converts the digital signal generated at the source output into another signal in digital form. Source coding is needed to reduce or eliminate redundancy for ... channel. The modulator can use any of the CW digital Modulation techniques ASK,PSK and FSK.

Compare TDMA and CDMA on the basis of sharing of time and B.W. Synchronization, code word ,guard band and guard time.

Description : Compare TDMA and CDMA on the basis of sharing of time and B.W. Synchronization, code word ,guard band and guard time.

Last Answer : Sr. No Parameters TDMA CDMA 1 Sharing of time & B.W Sharing of time of satellite Transponder using entire BW Sharing of time and bandwidth both. 2 ... guard times and guard bands are required if it uses along with TDMA & FDMA. Otherwise not required.

Draw the block diagram of TDMA system and explain its working.

Description : Draw the block diagram of TDMA system and explain its working.

Last Answer : Block diagram of TDMA system:- OR Explanation:- In TDMA, each user has all the bandwidth, all the power and part of the time. It is frequently used with data and ... receives the bursts from all other earth stations and must select from them the traffic destined only for itself.

Draw the block diagram of PCM receiver with the help of relevant wave form and explain its working

Description : Draw the block diagram of PCM receiver with the help of relevant wave form and explain its working

Last Answer : Block diagram of PCM receiver:- Explanation:- A PCM signal contaminated with noise is available at the receive input. The regeneration circuit at the receiver will separate PCM pulses from noise ... quantized PAM signal is passed through a low pass filter recovers the analog signal x (t).

Explain any one method of error detection with example.

Description : Explain any one method of error detection with example.

Last Answer : Duplicating each data unit for the purpose of detecting errors is a form of error detection called redundancy. Adding bits for the purpose of detecting errors is called redundancy checking. There are four basic ... 00111001 ● The number are added using one's complement arithmetic

State Hartley’s law and Shannon Hartley’s theorem.

Description : State Hartley’s law and Shannon Hartley’s theorem. 

Last Answer : Hartley's law The amount of information that can be sent in a given transmission is dependent on the bandwidth of communication channel and the duration of transmission.  OR  Hartley's theorem state ... Where, B = Channel Bandwidth S = Signal Power N = Noise within the channel bandwidth

State applications of spread spectrum modulation.

Description : State applications of spread spectrum modulation.

Last Answer : 1. Jam-resistant communication systems 2. CDMA radios 3. High Resolution Ranging: Spread Specturm Communications is often used in high resolution ranging. It is possible to locate an object ... range wireless phones for home and industry 7. Cellular base stations interconnection. 8. Bluetooth.

State the need of multiplexing.

Description : State the need of multiplexing.

Last Answer : Need of multiplexing  In the application like telephony there are large numbers of users involved. It is not possible to lay a separate pair of wires from each subscriber to the other ... as a coaxial cable or an optical fiber cable because of multiplexing bandwidth utilization is possible.

State advantages of TDMA over FDMA

Description : State advantages of TDMA over FDMA

Last Answer : 1. In TDMA since only one station is present at any given time so the crosstalk will avoided this is present in FDMA. 2. The entire channel band which can be allocated to signal channel at ... secure than FDMA. 8. Intermodulation products are absent as there is one carrier only in all time slots.

List different digital modulation techniques.

Description : List different digital modulation techniques. 

Last Answer : List of Different Digital Modulation technique:- (i) Amplitude shift keying -ASK (ii) Phase shift keying - PSK (iii) Frequency shift keying - FSK (iv) Quadrature Phase shift keying - QPSK (v) Differential Phase shift keying -DPSK (vi) Quadrature amplitude modulation- QAM

State characteristics of communication channel.

Description : State characteristics of communication channel. 

Last Answer : Characteristics of communication channel. 1. Bit rate 2.Baud rate 3.Bandwidth 4.Repeater distance 5.Channel capacity

State any two advantages and disadvantages of digital communication system.

Description : State any two advantages and disadvantages of digital communication system.

Last Answer : Advantages of digital communication Digital signals are better suited than analog signals for procession and combining using technique called multiplexing. Digital transmission systems are ... transmission requires precise time synchronization between the clocks in the transmitter and receiver.

Compare binary ASK, FSK &PSK modulation techniques

Description : Compare binary ASK, FSK &PSK modulation techniques 

Last Answer : Sr. No Parameter Binary ASK Binary FSK Binary PSK 1 Variable Characteristic Amplitude Frequency Phase 2 Maximum bandwidth(Hz) 2fb 5 fb /3 2fb 3 ... 1200 bits/sec Suitable for high bit rates 8 Detection method Envelope Envelope Coherent

Explain fast frequency hopping techniques with suitable waveforms. State its advantage and disadvantages.

Description : Explain fast frequency hopping techniques with suitable waveforms. State its advantage and disadvantages. 

Last Answer : In Fast Frequency hopping multiple frequencies or hops are used to transmit one symbol. The hop rate is higher than symbol rate but chip rate is equal to hop rate For each symbol ... at receiver 3. Complex and expensive digital frequency synthesizers are required 4. Data rates are low

Explain direct sequence spread spectrum (DSSS) transmitter with block diagram.

Description : Explain direct sequence spread spectrum (DSSS) transmitter with block diagram.

Last Answer : In direct sequence, the serial binary data is mixed with a higher frequency pseudorandom binary code at a faster rate and the result is used to phase-modulate a carrier. The ... 1010 with odd parity. le of spread spectrum modulation and demodulation using PSK for primary modulation.

State the Shannon Hartley’s theorem for channel capacity. Explain the effect of S/N ratio and bandwidth on channel capacity.

Description : State the Shannon Hartley’s theorem for channel capacity. Explain the effect of S/N ratio and bandwidth on channel capacity.

Last Answer : In information theory, the Shannon-Hartley theorem tells the maximum rate at which information can be transmitted over a communications channel of a specified bandwidth in the presence of noise. According to Shannon, ... value of S/N with increase in B,assuming the signal power S to be constant.

Compare FDM & TDM systems

Description : Compare FDM & TDM systems

Last Answer : Sr. No. FDM TDM 1 Divides the channel into the two or more frequency ranges that do not overlap. Divides and allocates certain Time periods to each channel. 2 Code word is ... Needs guard bands  Needs guard time 4 Problem of crosstalk No problem of crosstalk

Distinguish between TDMA and CDMA

Description : Distinguish between TDMA and CDMA

Last Answer : Sr. No. Parameter TDMA CDMA 1 Definition Entire bandwidth is shared among different subscribers at Fixed predetermined or dynamically assigned time intervals/slots. Entire bandwidth is ... phone, system(AMPS), Cordless telephone IS95 Wide band, CDMA 2000,2.5G and 3G

Explain DPCM with block diagram.

Description : Explain DPCM with block diagram.

Last Answer : The above figure shows the block diagram of DPCM transmitter x(t) is the analog input signal and x^(t) is its approximated signal. What is important to know is whether x^(t) ... used to produce the approximated signal x^(t)by passing the quantizer output through a predictor and accumulator.

Draw the block diagram of digital communication system.Explain the function of source encoder and channel encoder.

Description : Draw the block diagram of digital communication system.Explain the function of source encoder and channel encoder.

Last Answer : Source Encoder : The input to the source encoder (also referred to as the source coder) is a string of symbols occurring at a rate symbols/sec. The source encoder converts the ... it possible for the receiver to detect and/or correct some of the errors in the information bearing bits.

Draw the block diagram of DM transmitter.Explain each block in detail.

Description : Draw the block diagram of DM transmitter.Explain each block in detail.

Last Answer : Block diagram of DM transmitter:-  Explanation:-  Sample and Hold:- The input analog is sampled and converted to PAM signal, which is compared with the output of the DAC. The output of the DAC ... counter is decremented, alogic 0 is transmitted.  (Waveform is optional):- OR

State the advantages and disadvantages of digital communication system.

Description : State the advantages and disadvantages of digital communication system.

Last Answer : Advantages of Digital Communication :  1. High noise interference tolerance due to digital nature of the signal. 2. With channel coding, error detection and correction at receiver is possible. ... consumption (Due to various stages of conversion). 3. Needs synchronization 4.Sampling Error.

Define the concept of spread spectrum.

Description : Define the concept of spread spectrum.

Last Answer : Concept of spread spectrum :- Spread-spectrum techniques are methods by which a signal (e.g. an electrical, electromagnetic, or acoustic signal) generated with a particular bandwidth is deliberately ... to spread the power of the transmitted spread spectrum signal over a very large bandwidth. 

List the various multiple access techniques.

Description : List the various multiple access techniques.

Last Answer : 1. Frequency Division Multiple Access (FDMA) 2. Time Division Multiple Access (TDMA) 3. Code Division Multiple Access (CDMA) 4. Space Division Multiple Access (SDMA)

State two advantages of WDM technique.

Description : State two advantages of WDM technique.

Last Answer : ADVANTAGES OF WDM: 1. WDM has enhanced capacity. 2. WDM can be used for full duplex transmission with a single fiber. 3. It is inherently easier to reconfigure (addition or ... use optical components which are simpler and more reliable and often less costly than their electronic counterparts

Classify the modulation techniques.

Description : Classify the modulation techniques.

Last Answer : Classification of the modulation techniques:- 1. Amplitude Shift Keying (ASK) 2. Frequency Shift Keying (FSK) 3. Phase Shift Keying (PSK)

State the Hartley’s law with mathematical expression.

Description : State the Hartley’s law with mathematical expression.

Last Answer : Hartley's Law / Nyquist Theorem:- Statement: Hartley s Theorem/Law states that the channel capacity of the transmission channel of bandwidth B which carries a signal having M levels in the ... levels in the coding system, the greater the information rate that can be sent through the channel.

Define (i)Bit rate (ii)Baud rate

Description : Define (i)Bit rate (ii)Baud rate

Last Answer : (i)Bit rate :- Bit rate is simply the number of bits transmitted during one second and is expressed in bits per second (bps). Mathematically bit rate is given by:- Rb =1 / Tb where Tb is time ... 1 / Ts Where, baud rate = symbol rate (symbols per second) and Ts = time interval of one symbol.

Describe with neat sketch working of natural draft cooling towers.

Description : Describe with neat sketch working of natural draft cooling towers.

Last Answer : Natural draft cooling tower: -In natural draught cooling tower, the circulation of air is produced by the pressure difference of air inside the tower and outside atmospheric air Hot cooling water falls down ... the pressure difference of air inside and outside of cooling tower (natural flow).

Explain with the help of a neat sketch one of the evaporators covered under the group of natural circulation evaporators.

Description : Explain with the help of a neat sketch one of the evaporators covered under the group of natural circulation evaporators.

Last Answer : Natural circulation evaporators: The movement of liquid takes place as a result of convection current set up by heating process. Ex. evaporating pan, evaporating still, and short tube evaporator.  1. Evaporating ... area for evaporation. It consist of product outlet at bottom. Diagram:

Describe in brief with neat sketch: i) English bond ii) Flemish bond

Description : Describe in brief with neat sketch: i) English bond ii) Flemish bond

Last Answer : English bond : The Bond with alternate courses of headers and stretchers with a closer placed next to quoin header is called as the English Bond. Points Should be Remembered for English bond: 1. A ... . 4. Flemish Bond is slightly economical as a number of brick bats can be used.

Describe push rod overhead valve operating mechanism with neat sketch.

Description : Describe push rod overhead valve operating mechanism with neat sketch.

Last Answer : Push rod Overhead valve operating mechanism (OHV 4 -S engine): An overhead valve engine (OHV engine) is an engine in which the valves are placed over the cylinder head. The camshaft drive-chain ... . Overhead valve arrangement makes the engine slightly shorter than overhead camshaft.   OR  

Describe mono-shock regular swing arm suspension system with neat sketch.

Description : Describe mono-shock regular swing arm suspension system with neat sketch.

Last Answer : Mono-shock Regular swing arm : Original technology of mono-shock comes from the racing world where motor cycles compete in most extreme conditions. More advanced version of this technology is employed in these ... only one shock to adjust, and there is no worry about matching two shocks.   

Describe working of constant mesh gear box with neat sketch.

Description : Describe working of constant mesh gear box with neat sketch.

Last Answer : Working of constant mesh gear box: A simplified diagram of constant mesh box has been shown in Figure. In this gear box, all gears on the main transmission shaft are constantly connected to corresponding ... In this way by sliding the second dog clutch, second and first gears are obtained.

Describe constructional details of single cradle frame with neat sketch.

Description : Describe constructional details of single cradle frame with neat sketch.

Last Answer : Single cradle frame :  The single cradle is the simplest type of motorcycle frame, and looks similar to the first ever motorcycle frames. It is made from steel tubes that surround the engine with a main ... found in off-road motorcycles.  Figure: Typical motor cycle frame of cradle type

Describe with neat sketch the working of “Air Suspension”

Description : Describe with neat sketch the working of “Air Suspension”

Last Answer : Working: An air compressor takes the atmospheric air through a filter and compresses it to a pressure of about 240 MPa, at which pressure the air in the accumulator tank is maintained, which ... air gets further compressed and absorbs the shock when the wheel encounters a bump on the road. 

Describe working of Stabilizer bar with neat sketch

Description : Describe working of Stabilizer bar with neat sketch 

Last Answer : Stabilizer (Anti Roll) Bar: Working: When the wheel strikes a bump, it starts vibrating up & down, thus exerting torque on the bar, which acts as a spring. When one road wheel is ... obviate this tendency, a stabilizer is used in car suspension system. It prevents lateral swaying.  

Describe with neat sketch working of air compressor used in automobile workshops. State its two advantages

Description : Describe with neat sketch working of air compressor used in automobile workshops. State its two advantages

Last Answer : As shown in ig. Shows two stages reciprocating air compressor with water cooled and intercooler First of all fresh air is sucked from atmosphere in low pressure (L.P) cylinder during its suction ... :  1) Less power is required to drive the compressor.  2) Higher volumetric efficiency 

Describe with neat sketch the construction and working of surface condenser

Description : Describe with neat sketch the construction and working of surface condenser

Last Answer : Construction- It consists of horizontal cast iron cylindrical vessel pack with tubes, through which the cooling water flows. The ends of the condenser are cut off by vertical perforated type plates into ... ; the secondary function of condenser is to supply pure and hot feed water to boiler.  

Describe with neat sketch of working of bomb calorimeter

Description : Describe with neat sketch of working of bomb calorimeter

Last Answer : working of bomb calorimeter:   The calorimeter is made of austenitic steel which provides considerable resistant to corrosion and enables it to withstand high pressure. In the calorimeter use of a strong ... the calorimeter. From the above data the calorific value of the fuel can be found.