Describe with the neat sketch of hybrid junction and illustrate its properties.

Describe with the neat sketch of hybrid junction and illustrate its properties.
by

1 Answer

Answer :

image

The magic tee is a combination of E and H plane tees. Arm 3 forms an H-plane tee with arms 1 and 2. Arm 4 forms an E-plane tee with arms 1 and 2. Arms 1 and 2 are sometimes called the side or collinear arms. Port 3 is called the H-plane port, and is also called the Σ port, sum port or the P-port (for "parallel"). Port 4 is the E-plane port, and is also called the Δ port, difference port, or S-port (for "series"). A signal injected into the H-plane port will be divided equally between ports 1 and 2, and will be in phase. A signal injected into the E-plane port will also be divided equally between ports 1 and 2, but will be 180 degrees out of phase. If signals are fed in through ports 1 and 2, they are added at the H-plane port and subtracted at the E-plane port.

by

Related questions

Explain with neat sketch block diagram of optical fiber communication system and list out sources and detectors suitable for it.

Description : Explain with neat sketch block diagram of optical fiber communication system and list out sources and detectors suitable for it.

Last Answer : OR 1. The light source is normally an infrared LED or LASER device which is driven by the current value from the V to I convertor. It emits light which is proportional ... optical energy electrical signal. The light detectors which are used as PIN photodiode and avalanche photo diode.

Illustrate how telemetry tracking and command system used in satellite communication.

Description : Illustrate how telemetry tracking and command system used in satellite communication.

Last Answer : Telemetry, Tracking and Command (TT&C) Subsystem These systems are partly on the satellite and partly at the control earth station. They support the functions of the spacecraft management. Telemetry System ... pulse to the satellite. Then the satellite executes these commands.   OR  

Describe the working of directional coupler with neat diagram.

Description : Describe the working of directional coupler with neat diagram. 

Last Answer : Directional couplers are devices that will pass signal across one path while passing a much smaller signal along another path.  One of the most common uses of the directional coupler is to ... . The frequency determines the separation of the two holes as a fraction of the wavelength.  

Describe working of Reflex Klystron amplifier with a neat diagram.

Description : Describe working of Reflex Klystron amplifier with a neat diagram.

Last Answer : Operation: It is assumed that the oscillations are set up in the tube initially due to noise or switching transients and these oscillations are sustained by device operation. ... on the reference electron. These bunch transfer maximum energy to the gap to get sustained oscillations.

Sketch the construction of tunnel diode and write its operation.

Description : Sketch the construction of tunnel diode and write its operation.

Last Answer : Construction: Applications: • In digital networks. • As a high speed switch. • As a high frequency oscillator. • As a logic memory storage device. • In relaxation oscillator circuits.

With suitable sketch and explain the working of IMPATT diode.

Description : With suitable sketch and explain the working of IMPATT diode.

Last Answer : Any device which exhibits negative resistance for dc will also exhibit for ac i.e. if an ac voltage is applied current will rise when voltage falls at an ac rate. Hence negative resistance can ... due to applied reverse bias at a drift velocity dependent upon the presence of high dc field.

Draw the construction of magnetron and describe it’s working.

Description : Draw the construction of magnetron and describe it’s working.

Last Answer : Working/Operation: 1. Now assume RF oscillations are initiated due to some noise transient within the magnetron, the oscillations will be sustained by device operation. 2. Self- ... these favored electrons imparts enough energy to the RF oscillations so that they are sustained.  

Describe the antenna subsystem of satellite.

Description : Describe the antenna subsystem of satellite. 

Last Answer : Antennas on the satellite serve as an interface between the earth stations on the ground and various satellite subsystems during operations Antennas receive the uplink signals and transmit the downlink ... Types of antenna system use in satellite communication:  Parabolic antenna 

Describe the operation for pulsed radar to detect the object.

Description : Describe the operation for pulsed radar to detect the object.

Last Answer : The Block diagram of high power Pulsed RADAR set is shown in fig. Above. Trigger Source: It Provides pulses for the modulator. Pulse Modulator: This Modulator provides rectangular ... . Sync pulses are applied by the trigger source to the display devices or the display indicator. 

Describe rectangular waveguide in TE & TM mode.

Description : Describe rectangular waveguide in TE & TM mode.

Last Answer : i. Mode is defined as all possible configuration of electric and magnetic field which can exists in the waveguide. ii. Modes in rectangular waveguides are labeled TEm,nif they are transverse ... exist in rectangular waveguides. The formula for characteristic wave impedance for TM modes is,

Draw the construction of Avalanche photodiode. State its working principle.

Description : Draw the construction of Avalanche photodiode. State its working principle.

Last Answer : Avalanche photodiode are used to obtain the large gain, i.e. large output because Conventional photodiodes and PIN photodiodes obtain the limited gain. CONSTRUCTION: APD's are usually variation ... in avalanche with the number of carriers growing exponentially as the process continues.  

Draw the constructions of Gunn diode and explain its working.

Description : Draw the constructions of Gunn diode and explain its working.

Last Answer : Construction: When a dc bias of value equal or more than the threshold field (of about 3.3kV/cm) is applied to an n-type GaAs sample, the charge densities and electric field within ... device. The fundamental frequency in MHz is given by:   drift velocity and L=device length in µm. 

Draw the field pattern of circular waveguide for its dominant mode.

Description : Draw the field pattern of circular waveguide for its dominant mode.

Last Answer : TE1,1 Mode is the dominant mode in circular waveguides. In TEm,n/ TMm,nthe letter m denotes the number of full-wave intensity variations around the circumference and n represents the number of half-wave ... changes radially out from the center to the wall. (Cylindrical co-ordinates are used).

Draw block diagram of OTDR and explain its working.

Description : Draw block diagram of OTDR and explain its working.

Last Answer : Block diagram of OTDR Working principle of OTDR: A light pulse is launched into the fiber in the forward direction from an injection laser using either a ... backscattered light is detected using avalanche photodiode receiver. Output of photodiode receiver drivers an integrator.

State the advantages of circular waveguide and list its applications.

Description : State the advantages of circular waveguide and list its applications. 

Last Answer : Advantages:  The circular waveguide are easier to manufacture than rectangular waveguides and are easier to join. The TM01 modes are rotationally symmetrical and hence rotation of polarization can ... waveguides are also used with the cavity resonators to carry the input and output signals.

Draw the diagram of Fusion Splice and rigid alignment tube splice.

Description : Draw the diagram of Fusion Splice and rigid alignment tube splice. 

Last Answer : Different types of splicing are: 1. Fusion splicing or welding 2. Mechanical splicing 3. Elastic tube splicing FUSION SPLICING: A fiber join is a type of wield. The fiber ends ... figure below is a unique device that automatically performs lateral, longitudinal and angular alignment. 

Write up-link and down-link frequency for c-band, x-band, ka-band &ku-band.

Description : Write up-link and down-link frequency for c-band, x-band, ka-band &ku-band.

Last Answer : Write up-link and down-link frequency for c-band, x-band, ka-band &ku-band.

Explain the working of MTI radar with the help of block diagram and with suitable waveforms.

Description : Explain the working of MTI radar with the help of block diagram and with suitable waveforms.

Last Answer : Explanation : The echo pulse from the target is received by MTI radar antenna. If echo is due to moving target, the echo pulse undergoes a Doppler frequency. The received echo pulses then pass ... for fixed target magnitude and polarity of output will remain the same as shown in figure.

Write radar range equation and state the factor affecting maximum range of radar.

Description : Write radar range equation and state the factor affecting maximum range of radar.

Last Answer : The Radar range equation is given by The factors influencing maximum range are as follows Transmitted power (Pt): if the radar range is to be doubled we have to increase a ... (Pmin): A decrease in minimum receivable power will have the same effect has raising the transmuting power.

Define geo-stationary orbit and the geo-stationary satellite.

Description : Define geo-stationary orbit and the geo-stationary satellite.

Last Answer : Geostationary Orbit: A geostationary orbit, geostationary Earth orbit is a circular geosynchronous orbit 35,786 kilometers (22,236 mi) above the Earth's equator. Geostationary satellite: A geostationary ... such a satellite appears nearly stationary in the sky as seen by a ground-based observer

State two advantages and two applications of continuous wave radar.

Description : State two advantages and two applications of continuous wave radar.

Last Answer : Advantages of CW RADAR. (1) Capable of giving accurate measurement of relative velocity. (2) Low transmitting powers. (3) Compact hence can be used for mobile applications like police radar. (4) ... of the relative velocity of a moving target. (7) Human Gait Recognition (8) In Doppler Radar

Compare between waveguide and two wire transmission line

Description : Compare between waveguide and two wire transmission line

Last Answer :  waveguide and two wire transmission line

Distinguish between LED & LASER.

Description : Distinguish between LED & LASER.

Last Answer : LED & LASER.

Explain advantages of satellite communication system.

Description : Explain advantages of satellite communication system.

Last Answer : Broadcast property - Wide coverage area. Satellites, by virtue of their very nature, are an ideal means of transmitting information over vast geographical areas. This broadcasting property ... building and maintaining a communication facility is directly proportional to the distances involved.

Explain absorption loss and scattering loss occurs in optical fiber.

Description : Explain absorption loss and scattering loss occurs in optical fiber.

Last Answer : Scattering loss:- Basically, scattering losses are caused by the interaction of light with density fluctuations within a fiber. Density changes are produced when optical fibers are manufactured.  ... glass material. iii. Intrinsic absorption by the basic constituent atoms of the fiber material.

Define the following terms with respect to satellite: (i) Azimuth Angle (ii) Elevation Angle

Description : Define the following terms with respect to satellite: (i) Azimuth Angle (ii) Elevation Angle

Last Answer : Angle of Elevation: It is the angle subtended between the line of sight joining the earth station antenna and the satellite and the horizontal plane. Azimuth Angle: The angle measured ... (sub-satellite point) on the horizontal plane at the earth station is called as azimuth.

List different display methods used in Radar. Explain any one display method.

Description : List different display methods used in Radar. Explain any one display method.

Last Answer : Display methods used in RADAR are given below. 1. A-Scope 2. PPI 3. Automatic target detection A scope:   This is the most popular type of the deflection modulation type ... in the true bearing mode) or ship's heading (when the indicator is operated in the relative bearing mode) 

Define the term w.r.t. waveguide: (i) Cut-OFF frequency (ii) Group Velocity

Description : Define the term w.r.t. waveguide: (i) Cut-OFF frequency (ii) Group Velocity

Last Answer : Group velocity: It is defined as the rate at which the wave propagates through the waveguide and is given by The group velocity is also can be defined as the velocity of energy flow ... rectangular waveguide at a frequency below fc TE1,0. This is absolute cut off frequency of the waveguide.

Describe the working of PN junction diode with neat sketch under forward biased condition.

Description : Describe the working of PN junction diode with neat sketch under forward biased condition.

Last Answer : If the p-region (anode) is connected to the positive terminal of the external DC source and nside (cathode) is connected to the negative terminal of the DC source then the biasing ... The large number of majority carriers crossing the junction constitutes a current called as the forward current.

Illustrate the “Contour bund” and “Farm pond” with neat sketch.

Description : Illustrate the “Contour bund” and “Farm pond” with neat sketch.

Last Answer : Contour Bund: 1) Contour bunds are effective methods to conserve soil moisture in watershed for long duration. 2) Contour bunds are suitable in low rainfall areas where monsoon run-off can be impounded by ... cleaned more easily. 9) The sides of pond should be sloped for stability. 

Illustrate the procedure of Ground water recharge pit with neat sketch.

Description : Illustrate the procedure of Ground water recharge pit with neat sketch.

Last Answer : Procedure: 1) It is adopted for buildings having roof area up to 100 sq m. recharge pit of any shape is constructed generally 1 - 2 m wide and 2 - 3 m deep. 2) The pit is filled with ... water in to sub-soil. 5) This method is suitable where permeable strata is available at shallow depth

Illustrate Gabian structure with a neat sketch.

Description : Illustrate Gabian structure with a neat sketch.

Last Answer : i) A gabian wall is a retaining wall made of stacked stone-filled gabians tied together with wire. Gabion walls are usually battered (angled back towards the slope), or stepped back with the slope, ... and this water is used in rural areas for drinking, washing and minor irrigation purpose.

(i) Illustrate with neat sketch the working of absorber type of muffler (ii) sketch bellow type of thermostat

Description : (i) Illustrate with neat sketch the working of absorber type of muffler (ii) sketch bellow type of thermostat

Last Answer : (i) Working of absorber type of muffler: It consists of a perforated tube, around which a sound absorbing material, like fiber glass or steel wool is placed. The exhaust gases pass through the perforated tube. ... thus reducing the noise intensity.  (ii) Bellow type of thermostat:

Illustrate with neat sketch the working of battery ignition system.

Description : Illustrate with neat sketch the working of battery ignition system.

Last Answer : Battery ignition system': Figure shows line diagram of battery ignition system for a 4-cylinder petrol engine. It mainly consists of a 6 or 12 volt battery, ammeter, ignition switch, auto- ... charge is ignited-combustion startsproducts of combustion expand and produce power.    OR  

Illustrate with neat sketch the construction of fuel injector

Description : Illustrate with neat sketch the construction of fuel injector

Last Answer : Diesel Fuel Injector: The injector assembly consists of - i) a needle valve ii) a compression spring iii) a nozzle iv) an injector body. When the fuel is supplied to lift the injection pump it ... and hence the valve opening pressure is controlled by adjusting the screw provided at the top.  

Illustrate with neat sketch the process to control production of NOx in combustion chamber.

Description : Illustrate with neat sketch the process to control production of NOx in combustion chamber.

Last Answer : Method to control NOx: The EGR system is used to reduce the amount of NOx in the exhaust. NOx production increases as the temperature inside the combustion chamber rises due to acceleration or heavy engine loads, ... (less than 10% of total) to be supplied into the incoming air: fuel mixture.  

Explain ionospheric propagation with neat sketch. Explain two properties of layers of ionosphere.

Description : Explain ionospheric propagation with neat sketch. Explain two properties of layers of ionosphere.

Last Answer : Diagram :   Explanation: The transmitted signal travels into the upper atmosphere where it is reflected back to earth due to the presence of layers called as ionosphere in the upper ... having highest electron density of all layers, due to this F2 layer remains present at night time.

Describe avalanche and zener breakdown of PN junction with neat graph.

Description : Describe avalanche and zener breakdown of PN junction with neat graph.

Last Answer : Avalanche Breakdown It is observed in diodes having Vz> 8V. is called Avalanche Breakdown It occurs due to accelerating minority carriers. It shows gradual change. Breakdown voltage ... field. Breakdown is very sharp. Breakdown voltage decreases with increase in temperature 

Illustrate with the sketch functional relationship of major components of power transmission system

Description : Illustrate with the sketch functional relationship of major components of power transmission system

Last Answer : Fig:- major assembly & There location on chassis frame 1. Chassis Frame: - it is backbone of vehicle. all sub systems mounted on chassis frame 2. Engine:-it is heart of vehicle ... 7. Wheels & Tyres:-it carry weight of vehicle , transmit driving thrust, absorb road shocks

Illustrate with neat wiring diagram a single lamp control by two point method.

Description : Illustrate with neat wiring diagram a single lamp control by two point method.

Last Answer : Single lamp control by two point method:  This system is commonly used for stair case wiring. It consists of two way switches (the switch operates always in one of the two possible positions) the ... the person will change the position of switch S2, so that the lamp will be switched OFF'.

Describe with neat sketch working of air compressor used in automobile workshops. State its two advantages

Description : Describe with neat sketch working of air compressor used in automobile workshops. State its two advantages

Last Answer : As shown in ig. Shows two stages reciprocating air compressor with water cooled and intercooler First of all fresh air is sucked from atmosphere in low pressure (L.P) cylinder during its suction ... :  1) Less power is required to drive the compressor.  2) Higher volumetric efficiency 

Describe with neat sketch, the optical square and explain its principle.

Description : Describe with neat sketch, the optical square and explain its principle.

Last Answer : Principal of optical square :- the angle between the first incident ray and the last reflected ray is twice the angle between the two mirrors OR If there are two plane mirrors whose reflecting surfaces ... is 450 while that between the first incident ray and last reflected ray is 900 .  

Sketch and describe the layout of series hybrid vehicles.

Description : Sketch and describe the layout of series hybrid vehicles. 

Last Answer : Series-Hybrid vehicle  In Series Hybrid vehicles, the Internal Combustion Engine (ICE) drives a generator, which charges the battery and supplies current to the electronically controlled motor. The ... drive have to be rated to the maximum power. It has low overall system efficiency.

Describe in brief with neat sketch: i) English bond ii) Flemish bond

Description : Describe in brief with neat sketch: i) English bond ii) Flemish bond

Last Answer : English bond : The Bond with alternate courses of headers and stretchers with a closer placed next to quoin header is called as the English Bond. Points Should be Remembered for English bond: 1. A ... . 4. Flemish Bond is slightly economical as a number of brick bats can be used.

Describe push rod overhead valve operating mechanism with neat sketch.

Description : Describe push rod overhead valve operating mechanism with neat sketch.

Last Answer : Push rod Overhead valve operating mechanism (OHV 4 -S engine): An overhead valve engine (OHV engine) is an engine in which the valves are placed over the cylinder head. The camshaft drive-chain ... . Overhead valve arrangement makes the engine slightly shorter than overhead camshaft.   OR  

Describe mono-shock regular swing arm suspension system with neat sketch.

Description : Describe mono-shock regular swing arm suspension system with neat sketch.

Last Answer : Mono-shock Regular swing arm : Original technology of mono-shock comes from the racing world where motor cycles compete in most extreme conditions. More advanced version of this technology is employed in these ... only one shock to adjust, and there is no worry about matching two shocks.   

Describe working of constant mesh gear box with neat sketch.

Description : Describe working of constant mesh gear box with neat sketch.

Last Answer : Working of constant mesh gear box: A simplified diagram of constant mesh box has been shown in Figure. In this gear box, all gears on the main transmission shaft are constantly connected to corresponding ... In this way by sliding the second dog clutch, second and first gears are obtained.

Describe constructional details of single cradle frame with neat sketch.

Description : Describe constructional details of single cradle frame with neat sketch.

Last Answer : Single cradle frame :  The single cradle is the simplest type of motorcycle frame, and looks similar to the first ever motorcycle frames. It is made from steel tubes that surround the engine with a main ... found in off-road motorcycles.  Figure: Typical motor cycle frame of cradle type

Describe with neat sketch the working of “Air Suspension”

Description : Describe with neat sketch the working of “Air Suspension”

Last Answer : Working: An air compressor takes the atmospheric air through a filter and compresses it to a pressure of about 240 MPa, at which pressure the air in the accumulator tank is maintained, which ... air gets further compressed and absorbs the shock when the wheel encounters a bump on the road. 

Describe working of Stabilizer bar with neat sketch

Description : Describe working of Stabilizer bar with neat sketch 

Last Answer : Stabilizer (Anti Roll) Bar: Working: When the wheel strikes a bump, it starts vibrating up & down, thus exerting torque on the bar, which acts as a spring. When one road wheel is ... obviate this tendency, a stabilizer is used in car suspension system. It prevents lateral swaying.