What is the standard deviation if P 0.2 and n 400?

What is the standard deviation if P 0.2 and n 400?
by

1 Answer

Answer :

The answer depends on what the distribution is!
by

Related questions

As per IS: 456-2000, recommended value for standard deviation for concrete mix from M30 to M50 is [ A ] 1 N/mm2 [ B ] 2 N/mm2 [ C ] 4 N/mm2 [ D ] 5 N/mm2

Description : As per IS: 456-2000, recommended value for standard deviation for concrete mix from M30 to M50 is [ A ] 1 N/mm2 [ B ] 2 N/mm2 [ C ] 4 N/mm2 [ D ] 5 N/mm2

Last Answer : [ D ] 5 N/mm2

The standard deviation of the variation in the transmission loss of a circuit should not exceed A. 3 dB B. 1 dB C. 5 dB D. 0.5dB

Description : The standard deviation of the variation in the transmission loss of a circuit should not exceed A. 3 dB B. 1 dB C. 5 dB D. 0.5dB

Last Answer : B. 1 dB

As per IS:456, the strength of concrete sample is less than [ A ] The characteristic strength minus 1.35times the standard deviation [ B ] 0.80 times the characteristic strength [ C ] Greater of (a) and (b) [ D ] None of the above

Description : As per IS:456, the strength of concrete sample is less than [ A ] The characteristic strength minus 1.35times the standard deviation [ B ] 0.80 times the characteristic strength [ C ] Greater of (a) and (b) [ D ] None of the above

Last Answer : [ C ] Greater of (a) and (b)

Provided that the ACT is reasonably normally distributed with a mean of 18 and standard deviation of 6, determine the proportion of students with a 33 or higher. a. 0.0062 b. 0.0109 c. 0.0124 d. 0.0217

Description : Provided that the ACT is reasonably normally distributed with a mean of 18 and standard deviation of 6, determine the proportion of students with a 33 or higher. a. 0.0062 b. 0.0109 c. 0.0124 d. 0.0217

Last Answer : a. 0.0062

What does standard deviation result mean?

Description : What does standard deviation result mean?

Last Answer : It shows you how dispersed the results are.

Standard deviation and mean?

Description : Standard deviation and mean?

Last Answer : It is very handy to just memorize the 68 – 95 – 99.7 rule. It means 68% of the population is within +/-1 SD, 95% are within 2 SD and 99.7 are within 3 SD.

Statistics question. Finding the standard deviation for these numbers: 1, 2, 98, 100, 105.

Description : Statistics question. Finding the standard deviation for these numbers: 1, 2, 98, 100, 105.

Last Answer : Hint: There aren’t going to be any trick questions in statistics. There is enough information to calculate the standard deviation.

How to understand this Standard Deviation question?

Description : How to understand this Standard Deviation question?

Last Answer : So, this question is related to the definition of standard deviation, rather then having to calculate it. I refer you to wikipedia, which has a decent write-up. Specifically the rules for normally distributed data ... the math there is too high-level, just take a good look at the plot on the right.

How do I find the mean and standard deviation from a frequency table?

Description : How do I find the mean and standard deviation from a frequency table?

Last Answer : Do you have a graphing calculator?

Range, and Standard Deviation?

Description : Range, and Standard Deviation?

Last Answer : http://en.wikipedia.org/wiki/Range_%28statistics%29 http://en.wikipedia.org/wiki/Arithmetic_mean http://en.wikipedia.org/wiki/Standard_deviation#Basic_example_of_a_population_standard_deviation

How to compute mean and standard deviation for each column of a pandas dataframe -Web-Development

Description : How to compute mean and standard deviation for each column of a pandas dataframe -Web-Development

Last Answer : answer:

What is the standard deviation ?

Description : What is the standard deviation ?

Last Answer : Ideal deviation is a statistical method of measuring business risk.

What type of measures are the range and the standard deviation?

Description : What type of measures are the range and the standard deviation?

Last Answer : They are measures of the spread of data.

What is the standard deviation of the following data set rounded to the nearest tenth 52.1 45.5 51 48.8 43.6?

Description : What is the standard deviation of the following data set rounded to the nearest tenth 52.1 45.5 51 48.8 43.6?

Last Answer : Feel Free to Answer

In the Empirical Rule of data will fall in with two standard deviation.?

Description : In the Empirical Rule of data will fall in with two standard deviation.?

Last Answer : Approx 95% of the observations.

In the Empirical Rule of data will fall in with two standard deviation.?

Description : In the Empirical Rule of data will fall in with two standard deviation.?

Last Answer : Approx 95% of the observations.

What is the standard deviation and what is the probability that a student scored higher than 322 if the mean test score is 312 and 16 percent of the scores are under 307?

Description : What is the standard deviation and what is the probability that a student scored higher than 322 if the mean test score is 312 and 16 percent of the scores are under 307?

Last Answer : Assuming a normal distribution:If 16% are less than 307, then 84% are greater than 307.Using single tailed normal tables we want the z value whichgives 84%-50% = 34% = 0.34 to the left of the mean; this is z ≈ ... 1 - 0.977 = 0.023 = 2.3 % are greater than 322→ probability greater than 322 is 2.3%

What is the qualifying time for the fastest 5 percent of all runners if the average finishing time is 5 minutes 17 seconds with standard deviation of 12 seconds?

Description : What is the qualifying time for the fastest 5 percent of all runners if the average finishing time is 5 minutes 17 seconds with standard deviation of 12 seconds?

Last Answer : Assuming a normal distribution:For the fastest 5% we need to find the z value which gives 100%- 5% = 95% of the area under the normal curve (from -∞).Using single tailed tables, we need the z value which gives 95%- 50% ... deviation≈ 5 min 17 sec + 1.645 12 sec≈ 5 min 17 sec + 20 s= 5 min 37 sec

How many of scores will be within 1 standard deviation of the population mean?

Description : How many of scores will be within 1 standard deviation of the population mean?

Last Answer : Assuming a normal distribution 68 % of the data samples will bewith 1 standard deviation of the mean.

In which of the following towns does the LMT (Local Meridian Time) show the greatest deviation from the 1ST (Indian Standard Time) ? [NDA 1991] (a) Delhi (b) Cochin (c) Mumbai (d) Kohima

Description : In which of the following towns does the LMT (Local Meridian Time) show the greatest deviation from the 1ST (Indian Standard Time) ? [NDA 1991] (a) Delhi (b) Cochin (c) Mumbai (d) Kohima

Last Answer : Ans: (d)

Political unrest, budget overruns, size and complexity of the project Answer: B (8)Decision trees are best used for : 1. Determining the interaction of the amount at stake and the expected value 2. Association of the probabilities with the risk events 3. An illustration of how to see the interactions between decisions and the associated events 4. A flow chart which determines the standard deviation of the risk event

Description : Political unrest, budget overruns, size and complexity of the project  Answer: B  (8)Decision trees are best used for : 1. Determining the interaction of the amount at stake and the expected ... and the associated events  4. A flow chart which determines the standard deviation of the risk event

Last Answer : 3. An illustration of how to see the interactions between decisions and the associated events

The square of standard deviation is (A) Coefficient of variance (B) Standard deviation (C)Variance (D) Mean deviation

Description : The square of standard deviation is (A) Coefficient of variance (B) Standard deviation (C)Variance (D) Mean deviation

Last Answer : (C)Variance

method requires the following data pertaining annual flood series (i) Mean value (ii) Standard deviation (iii) Length of record (iv) Coefficient of skew The correct answer is (A) (i) and (ii) (B) (i),(i) and (iii) (C) (i), (ii) and (iv) (D) (i), (ii), (iii) and (iv)

Description : method requires the following data pertaining annual flood series (i) Mean value (ii) Standard deviation (iii) Length of record (iv) Coefficient of skew The correct answer is (A) (i) and (ii) (B) (i),(i) and (iii) (C) (i), (ii) and (iv) (D) (i), (ii), (iii) and (iv)

Last Answer : Answer: Option B

If the expected time for completion of a project is 10 days with a standard deviation of 2 days, the expected time of completion of the project with 99.9% probability is (A) 4 days (B) 6 days (C) 10 days (D) 16 day

Description : If the expected time for completion of a project is 10 days with a standard deviation of 2 days, the expected time of completion of the project with 99.9% probability is (A) 4 days (B) 6 days (C) 10 days (D) 16 day

Last Answer : (D) 16 days

If the expected time of completion of a project is 60 weeks with a standard deviation of 5 weeks, the probability of completing the project in 50 weeks and 65 weeks respectively will be (A) 2.3% and 84.1% (B) 97.7% and 84.1% (C) 97.7 % and 15.9% (D) 15.9% and 97.7%

Description : If the expected time of completion of a project is 60 weeks with a standard deviation of 5 weeks, the probability of completing the project in 50 weeks and 65 weeks respectively will be (A) 2.3% and 84.1% (B) 97.7% and 84.1% (C) 97.7 % and 15.9% (D) 15.9% and 97.7%

Last Answer : (A) 2.3% and 84.1%

If the average compressive strength is 4000 kg/cm2 and standard deviation is 500, the co-efficient of variation is (A) 10 % (B) 12.5 % (C) 15 % (D) 18.5%

Description : If the average compressive strength is 4000 kg/cm2 and standard deviation is 500, the co-efficient of variation is (A) 10 % (B) 12.5 % (C) 15 % (D) 18.5%

Last Answer : Answer: Option B

86. To apply Shewhart-cusum combined procedure, the Shewhart control limits should be applied almost standard deviation from the center. a) 2 b) 1 c) 1.5 d) 3.5

Description : 86. To apply Shewhart-cusum combined procedure, the Shewhart control limits should be applied almost standard deviation from the center. a) 2 b) 1 c) 1.5 d) 3.5

Last Answer : 2

_________ is a measure of risk-adjusted return a. Simple return b. Standard Deviation c. Beta d. Sharpe Ratio ANS: Sharpe Ratio

Description : _________ is a measure of risk-adjusted return a. Simple return b. Standard Deviation c. Beta d. Sharpe Ratio ANS: Sharpe Ratio

Last Answer : ANS: Sharpe Ratio

The results for accuracy studies in Analytical Method Validation, are expressed in terms of? A. % Relative error B. Correlation coefficient C. Relative standard deviation D. Mean

Description : The results for accuracy studies in Analytical Method Validation, are expressed in terms of? A. % Relative error B. Correlation coefficient C. Relative standard deviation D. Mean

Last Answer : A. % Relative error

Which measures the systematic or non -systematic risk of a security ? a. Beta c. standard deviation b. Variance d. Range

Description : Which measures the systematic or non -systematic risk of a security ? a. Beta c. standard deviation b. Variance d. Range

Last Answer : Answer :a

A measure of risk per unit of expected return A.standard deviation B . Coefficient of variation C.Correlation coefficient D. Beta

Description : A measure of risk per unit of expected return A.standard deviation B . Coefficient of variation C.Correlation coefficient D. Beta 

Last Answer : Answer: B 

The distribution of heights of American women aged 18 to 24 is approximately normally distributed with a mean of 65.5 inches and standard deviation of 2.5 inches. Calculate the z-score for a woman six feet tall. a. 2.60 b. 4.11 c. 1.04 d. 1.33

Description : The distribution of heights of American women aged 18 to 24 is approximately normally distributed with a mean of 65.5 inches and standard deviation of 2.5 inches. Calculate the z-score for a woman six feet tall. a. 2.60 b. 4.11 c. 1.04 d. 1.33

Last Answer : a. 2.60

A national random sample of 20 ACT scores from 2010 is listed below. Calculate the sample mean and standard deviation. 29, 26, 13, 23, 23, 25, 17, 22, 17, 19, 12, 26, 30, 30, 18, 14, 12, 26, 17, 18 a. 20.50, 5.79 b. 20.50, 5.94 c. 20.85, 5.79 d. 20.85, 5.94

Description : A national random sample of 20 ACT scores from 2010 is listed below. Calculate the sample mean and standard deviation. 29, 26, 13, 23, 23, 25, 17, 22, 17, 19, 12, 26, 30, 30, 18, 14, 12, 26, 17, 18 a. 20.50, 5.79 b. 20.50, 5.94 c. 20.85, 5.79 d. 20.85, 5.94

Last Answer : Katie earned 84,92,84,75 and 70 on her first 5 tests. What is the minimum grade Katie needs to earn on the next test to have a mean of 84?

Given IQ scores are approximately normally distributed with a mean of 100 and standard deviation of 15, the proportion of people with IQs above 130 is: a. 95% b. 68% c. 5% d. 2.5%

Description : Given IQ scores are approximately normally distributed with a mean of 100 and standard deviation of 15, the proportion of people with IQs above 130 is: a. 95% b. 68% c. 5% d. 2.5%

Last Answer : d. 2.5%

In a large random data set following normal distribution, the ratio (%) of number of data points which are in the range of (mean ± standard deviation) to the total number of data points, is (A) ~ 50% (B) ~ 67% (C) ~ 97% (D) ~ 47%

Description : In a large random data set following normal distribution, the ratio (%) of number of data points which are in the range of (mean ± standard deviation) to the total number of data points, is (A) ~ 50% (B) ~ 67% (C) ~ 97% (D) ~ 47%

Last Answer : Answer: B

In the following diagram, the path of a ray of light passing through a glass prism is shown: In this diagram the angle of incidence, the angle of emergence and the angle of deviation respectively are (select the correct option): (a) X, R and T (b) Y, Q and T (c) X, Q and P (d) Y, Q and P

Description : In the following diagram, the path of a ray of light passing through a glass prism is shown: In this diagram the angle of incidence, the angle of emergence and the angle of deviation respectively are (select the correct option): (a) X, R and T (b) Y, Q and T (c) X, Q and P (d) Y, Q and P

Last Answer : (d) Y, Q and P

If N is deviation angle the length L of a parabolic vertical curve for overtaking sight distance S, is (A) NS²/9.6 if L > S (B) NS²/9.6 if L < S (C) 2S - 9.6/N if L < S (D) Both (A) and (C)

Description : If N is deviation angle the length L of a parabolic vertical curve for overtaking sight distance S, is (A) NS²/9.6 if L > S (B) NS²/9.6 if L < S (C) 2S - 9.6/N if L < S (D) Both (A) and (C)

Last Answer : Answer: Option D

If N is deviation angle, the length L, of a parabolic vertical curve for safe stopping distance S, is(A) NS²/4.4 if L > S(B) 2S - 4.4/N if L < S(C) 2S - 4.4/N if L > S(D) Both (a) and (b)

Description : If N is deviation angle, the length L, of a parabolic vertical curve for safe stopping distance S, is (A) NS²/4.4 if L > S (B) 2S - 4.4/N if L < S (C) 2S - 4.4/N if L > S (D) Both (a) and (b)

Last Answer : Answer: Option D

square cross section b/h/h'=400/400/40mm with a reinforcement ratio of p=0.015 is loaded for action forces of axial load plus uniaxial bending.the column is to be made of C25/30 concrete & S-460 steel.check whether the column AB is short or long?

Description : square cross section b/h/h'=400/400/40mm with a reinforcement ratio of p=0.015 is loaded for action forces of axial load plus uniaxial bending.the column is to be made of C25/30 concrete & S-460 steel.check whether the column AB is short or long?

Last Answer : 10001/999900

A vibrating machine of 100 kg is mounted on a rubber pad which has stiffness of 500 N/m. Determine force transmitted to the foundation if the unbalanced force 500 N acts on it. The frequency ratio (ω/ω n ) is 1.5 and ξ = 0.5 A. 461.62 N B. 400.23 N C. 450 N D. Insufficient data

Description : A vibrating machine of 100 kg is mounted on a rubber pad which has stiffness of 500 N/m. Determine force transmitted to the foundation if the unbalanced force 500 N acts on it. The frequency ratio (ω/ω n ) is 1.5 and ξ = 0.5 A. 461.62 N B. 400.23 N C. 450 N D. Insufficient data

Last Answer : A. 461.62 N

A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (f n ), respectively, are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz

Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... , are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz

Last Answer : a) 0.471 and 1.19 Hz

A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (f n ), respectively, are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz

Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... .19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz

Last Answer : a) 0.471 and 1.19 Hz

A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the value of E = 0.2 × 106 N/mm2 , the depth of the joist, is (A) 200 mm (B) 250 mm (C) 300 mm (D) 400 mm

Description : A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so  that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the  value of E = 0.2 ... joist, is  (A) 200 mm  (B) 250 mm  (C) 300 mm  (D) 400 mm 

Last Answer : (D) 400 mm 

If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105 N/mm2 ) when subjected to a twisting moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is (A) 0.001 (B) 0.002 (C) 0.0025 (D) 0.003

Description : If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105  N/mm2 ) when subjected to a twisting  moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is  (A) 0.001  (B) 0.002  (C) 0.0025  (D) 0.003 

Last Answer : (C) 0.0025 

Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be  (a) 4.17m3/kgmol  (b) 400 m3/kg mol  (c) 0.15 m3/kg mol  (d) 41.7 m3/kg mol  (e) 417m3/kgmol.

Description : Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be  (a) 4.17m3/kgmol  (b) 400 m3/kg mol  (c) 0.15 m3/kg mol  (d) 41.7 m3/kg mol  (e) 417m3/kgmol.

Last Answer : Answer : a

What is the deviation ratio for an FM-phone signal having a maximum frequency swing of plus or minus 5 kHz and accepting a maximum modulation rate of 3kHz? A. 60 B. 0.16 C. 0.6 D. 1.66

Description : What is the deviation ratio for an FM-phone signal having a maximum frequency swing of plus or minus 5 kHz and accepting a maximum modulation rate of 3kHz? A. 60 B. 0.16 C. 0.6 D. 1.66

Last Answer : D. 1.66

What is 2 400 000 in standard form?

Description : What is 2 400 000 in standard form?

Last Answer : 2,400,000 is 2.4*10^6 in standard form or scientific notation

At standard pressure and temperature the average speed of molecules is A. 400 m s-1 B. 500 m s-1 C. 600 m s-1 D. 700 m s-1

Description : At standard pressure and temperature the average speed of molecules is A. 400 m s-1 B. 500 m s-1 C. 600 m s-1 D. 700 m s-1

Last Answer : 400 m s-1

Standard quantity of material per unit 5KG. Standard Price Rs 5 per KG. actual number of units 400 units. Actual quantity 2,200KG and price of material Rs 4.80 per kg. Calculate material price. a) 100(F) b) 500(A) c) 440(F) d) 600(F)

Description : Standard quantity of material per unit 5KG. Standard Price Rs 5 per KG. actual number of units 400 units. Actual quantity 2,200KG and price of material Rs 4.80 per kg. Calculate material price. a) 100(F) b) 500(A) c) 440(F) d) 600(F)

Last Answer : The standard quantity of material per unit is 5KG, so the standard quantity for 400 units would be: Standard quantity = 5KG/unit x 400 units = 2000KG The standard price per KG is Rs 5, so the ... material cost was lower than the standard material cost. Option (c) is the correct answer: 440(F).

With regard to standard of quality of drinking water as laid down by Indian Railway , the requirement (desirable) limit of total dissolved solids should not be more than---------- mg/l a)200 b) 300 c) 400 d) 500*

Description : With regard to standard of quality of drinking water as laid down by Indian Railway , the requirement (desirable) limit of total dissolved solids should not be more than---------- mg/l a)200 b) 300 c) 400

Last Answer : d) 500*