How many devices can I link to a router?

How many devices can I link to a router?
by

1 Answer

Answer :

The number of devices you can link to a router will depend on the specific router,typically 4 devices can be connected.
by

Related questions

Will having multiple IDLE devices connected to a router still slow it down?

Description : Will having multiple IDLE devices connected to a router still slow it down?

Last Answer : Mostly routers don't handle 10 devices at once, at least the ones I am aware of, mostly. If they are sleeping, they might occasionally ping your system, but they shouldn't cause much of a slow down ... pretty good modem/router (300). You can go bigger, or smaller, and that will change your service.

Will the Buffalo WZR-HP-G300NH wireless router handle both "g" and "n" devices simultaneosuly?

Description : Will the Buffalo WZR-HP-G300NH wireless router handle both "g" and "n" devices simultaneosuly?

Last Answer : answer: N is backward compatible, so yes. Both ways - 802.11g clients will connect with 802.11n routers, and 802.11n clients will connect with 802.11g routers. There may be ... wireless-reviews/29885?task=view&limit=1&start=6 http://www.buffalotech.com/support/getfile/WZR-HP-G300NH_Manual_web.pdf

Wireless router not connecting with SOME devices...

Description : Wireless router not connecting with SOME devices...

Last Answer : It is pretty common for me to have to reboot my wireless router about every other month. I have about 10 devices (computers, the kids gameboys, etc.) that connect to it. It is not uncommon for me ... same behavoir, cisco, netgear, linksys and apple I've yet to find one that works 24/7 consitently.

Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1) DSL modem 2) A multi-homed firewall 3) VLAN 4) A brouter that acts both as a bridge and a router

Description : Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1) DSL modem 2) A multi-homed firewall 3) VLAN 4) A brouter that acts both as a bridge and a router

Last Answer : 2) A multi-homed firewall

Which of the following devices discriminates between multicast and unicast packets? 1) Multicast switch 2) Bicast switch 3) Bicast router 4) Mulicast Router

Description : Which of the following devices discriminates between multicast and unicast packets? 1) Multicast switch 2) Bicast switch 3) Bicast router 4) Mulicast Router

Last Answer : 4) Mulicast Router

Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1 DSL modem 2 A multi-homed firewall 3 VLAN 4 A brouter that acts both as a bridge and a router

Description : Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1 DSL modem 2 A multi-homed firewall 3 VLAN 4 A brouter that acts both as a bridge and a router

Last Answer : 2 A multi-homed firewall

Which of the following devices discriminates between multicast and unicast packets? 1 Multicast switch 2 Bicast switch 3 Bicast router 4 Mulicast Router

Description : Which of the following devices discriminates between multicast and unicast packets? 1 Multicast switch 2 Bicast switch 3 Bicast router 4 Mulicast Router

Last Answer : 4 Mulicast Router

The network layer consists of which hardware devices? A. Router B. Bridges C. Switches D. All of the above

Description : The network layer consists of which hardware devices? A. Router B. Bridges C. Switches D. All of the above 

Last Answer : D. All of the above  

In the following list of devices which device is used in network layer? (1) Repeaters (2) Router (3) Application Gateway (4) Switch

Description : In the following list of devices which device is used in network layer? (1) Repeaters (2) Router (3) Application Gateway (4) Switch

Last Answer : Router

Why can't I get online w/ Ubuntu and D-Link DIR-655 router?

Description : Why can't I get online w/ Ubuntu and D-Link DIR-655 router?

Last Answer : You don’t want WPA Enterprise, you want WPA Personal. The password it’s asking for is the same as the key. The two are used interchangeably in this case.

Is my DL-624 D-Link Wireless Router kaput?

Description : Is my DL-624 D-Link Wireless Router kaput?

Last Answer : answer:I've had several d-link switches and one d-link router die on me. How old is it? I haven't had good luck with d-link but for some reason I seem to keep buying them when they're ... shows up on the network. The default configuration probably puts the ip address of the router at 192.168.1.1

What to do if I forget the login password of TP-Link Wireless Router?

Description : What to do if I forget the login password of TP-Link Wireless Router?

Last Answer : You will have to reset your TP-link router to its default settings.

Can we update the D-link router firmware manually?

Description : Can we update the D-link router firmware manually?

Last Answer : Yes, it is possible by downloading the firmware’s recent version through dlink-router-local.net support website.

What to do if my D-link Router is not Performing Properly?

Description : What to do if my D-link Router is not Performing Properly?

Last Answer : This could be due to several reasons such as an outdated firmware or overheating of the firmware. You must ensure that your firmware is of the latest date, else update it. Also, try to reset your router and reboot it.

What is a D link router do exactly?

Description : What is a D link router do exactly?

Last Answer : A D Link router is a router that allows computers to be connected to the internet through a wireless network. The D Link router isn't much different than other routers except it may provide faster internet connectivity and more plugs for more computers to be hooked-up.

A _________ interconnects LAN having identical protocols at the physical and data link layers. A. All of these B. bridge C. router D. Gateway

Description : A _________ interconnects LAN having identical protocols at the physical and data link layers. A. All of these B. bridge C. router D. Gateway

Last Answer : B. bridge

A ________operates in both thephysical andthe data link layer. A) passive hub B) repeater C) bridge D) router

Description : A ________operates in both thephysical andthe data link layer. A) passive hub B) repeater C) bridge D) router

Last Answer : bridge

A _______ is a connecting devicethat operates in the physical and data link layers of theInternet model. A) repeater B) bridge C) router D) none of the above

Description : A _______ is a connecting devicethat operates in the physical and data link layers of theInternet model. A) repeater B) bridge C) router D) none of the above

Last Answer : bridge

In OSPF, a ________ link is a network is connectedto only one router. A) point-to-point B) transient C) stub D) none of the above

Description : In OSPF, a ________ link is a network is connectedto only one router. A) point-to-point B) transient C) stub D) none of the above

Last Answer : stub

In OSPF, a ________ link connects two routers without anyother host or router in between. A) point-to-point B) transient C) stub D) none of the above

Description : In OSPF, a ________ link connects two routers without anyother host or router in between. A) point-to-point B) transient C) stub D) none of the above

Last Answer : point-to-point

The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Description : The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : physical and data link

The layer one of the OSI model is A) Physical layer B) Link layer C) Router layer D) Broadcast layer

Description : The layer one of the OSI model is A) Physical layer B) Link layer C) Router layer D) Broadcast layer

Last Answer : A) Physical layer

An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes. The number of fragments that the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Description : An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes ... the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Last Answer : d. 13

The layer one of the OSI model is A) Physical layer B) Link layer C) Router layer D) Broadcast layer

Description : The layer one of the OSI model is A) Physical layer B) Link layer C) Router layer D) Broadcast layer

Last Answer : A) Physical layer

The layer one of the OSI model is A) Physical layer B) Link layer C) Router layer D) Broadcast layer

Description : The layer one of the OSI model is A) Physical layer B) Link layer C) Router layer D) Broadcast layer

Last Answer : A) Physical layer

In the _______ method, the primary device controls the link; thesecondary devices follow its instructions. A) reservation B) polling C) token passing D) none of the above

Description : In the _______ method, the primary device controls the link; thesecondary devices follow its instructions. A) reservation B) polling C) token passing D) none of the above

Last Answer : polling

The sharing of a medium and its link by two or more devices is called _______. A) modulation B) encoding C) line discipline D) multiplexing

Description : The sharing of a medium and its link by two or more devices is called _______. A) modulation B) encoding C) line discipline D) multiplexing

Last Answer : multiplexing

A _______is the optical link connecting two neighbor devices. A) section B) line C) path D) none of the above

Description : A _______is the optical link connecting two neighbor devices. A) section B) line C) path D) none of the above

Last Answer : line

In a ________ connection, three or more devices share a link. A) multipoint B) point-to-point C) (a) and(b) D) none of the above

Description : In a ________ connection, three or more devices share a link. A) multipoint B) point-to-point C) (a) and(b) D) none of the above

Last Answer : multipoint

In a _______ connection, more thantwo devices can share asingle link. A) point-to-point B) multipoint C) primary D) secondary

Description : In a _______ connection, more thantwo devices can share asingle link. A) point-to-point B) multipoint C) primary D) secondary

Last Answer : multipoint

The _______ layer ensures interoperability between communicating devices through transformation of data into a mutually agreed upon format. a. network b. presentation c. transport d. data link

Description : The _______ layer ensures interoperability between communicating devices through transformation of data into a mutually agreed upon format. a. network b. presentation c. transport d. data link

Last Answer : b. presentation

The functions of a Logical Link Layer (LLC) are a. Error control b. Flow control c. Creating and managing the communication link between two devices with the help of the Transport layer. d. All the above

Description : The functions of a Logical Link Layer (LLC) are a. Error control b. Flow control c. Creating and managing the communication link between two devices with the help of the Transport layer. d. All the above

Last Answer : d. All the above

The functions of a Logical Link Layer (LLC) are ___. A. Error control B. Flow control C. Creating and managing the communication link between two devices with the help of the Transport layer. D. All the above

Description : The functions of a Logical Link Layer (LLC) are ___. A. Error control B. Flow control C. Creating and managing the communication link between two devices with the help of the Transport layer. D. All the above

Last Answer : D. All the above

Three or more devices share a link in ________ connection. a) Unipoint b) Multipoint c) Point to point d) Simplex

Description : Three or more devices share a link in ________ connection. a) Unipoint b) Multipoint c) Point to point d) Simplex

Last Answer : b) Multipoint

Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a physical layer device, and a switch is a data link layer device. C. A hub causes larger collision domains. D. Hubs are more sophisticated versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Description : Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a ... versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Last Answer : b. A,B,C

The _____layer defines the electrical and physical specifications for devices: a) Data Link Layer b) Presentation Layer c) Physical Layer d) None of These

Description : The _____layer defines the electrical and physical specifications for devices: a) Data Link Layer b) Presentation Layer c) Physical Layer d) None of These

Last Answer : c) Physical Layer

Which protocol is used to link all the devices in the IoT? A. TCP/IP B. Network C. UDP D. HTTP

Description : Which protocol is used to link all the devices in the IoT? A. TCP/IP B. Network C. UDP D. HTTP

Last Answer : A. TCP/IP 

In a fully connected mesh network with n devices, there are ................ physical channels to link all devices. (A) n(n–1)/2 (B) n(n+1)/2 (C) 2n (D) 2n+1

Description : In a fully connected mesh network with n devices, there are ................ physical channels to link all devices. (A) n(n–1)/2 (B) n(n+1)/2 (C) 2n (D) 2n+1

Last Answer : (A) n(n–1)/2