Description : _______ is designed to be usedin wirelessapplications in which stations must be ableto sharethe medium without interception by an eavesdropperand without beingsubject tojamming from a malicious intruder. A) Spread spectrum B) Multiplexing C) Modulation D) None of the above
Last Answer : Spread spectrum
Description : Modulation is theprocessof A. converting analogsignals todigital signals B. converting digital signals toanalog signals C. Multiplexing various signals intohigh speed line signals D. performing data encryption
Last Answer : converting digital signals toanalog signals
Description : A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation
Last Answer : c. multiplexing
Description : Unipolar, bipolar, and polar encoding are typesof _______ encoding. A) line B) block C) NRZ D) Manchester
Last Answer : line
Description : ________is the set of techniques that allows the simultaneous transmission of multiple signalsacrossa single data link. A) Demodulating B) Multiplexing C) Compressing D) None of the above
Last Answer : Multiplexing
Description : Rate of change of a signal on a transmission medium after encoding and modulation have occurred
Last Answer : baud rate
Description : In a _______ connection, more thantwo devices can share asingle link. A) point-to-point B) multipoint C) primary D) secondary
Last Answer : multipoint
Description : In the _______ method, the primary device controls the link; thesecondary devices follow its instructions. A) reservation B) polling C) token passing D) none of the above
Last Answer : polling
Description : In ATM, the _____ layer defines thetransmission medium,bit transmission,encoding, and electrical-to-optical transformation. A) physical B) ATM layer C) AAL D) none of the above
Last Answer : physical
Description : The _______ layer ensures interoperability between communicating devices through transformation of data into a mutually agreed upon format. a. network b. presentation c. transport d. data link
Last Answer : b. presentation
Description : Demodulation is aprocessof A. converting analog to digital signals B. converting digital to analogsignals C. multiplexing various signals intoone high speed line signals D. performing data description
Last Answer : converting analog to digital signals
Description : A _______is the optical link connecting two neighbor devices. A) section B) line C) path D) none of the above
Description : The receive GCE system in an earth station performs what function(s)? A. Modulation and multiplexing B. Up conversion C. Demodulation and demultiplexing D. Down conversion
Last Answer : C. Demodulation and demultiplexing
Description : Used for time division multiplexing. A. Frequency modulation B. Pulsed modulation C. SSB D. Amplitude modulation
Last Answer : B. Pulsed modulation
Description : A good example of a pilot tone system used in commercial frequency modulation stations. A. FDM B. Time division C. Stereo multiplexing D. Frequency modulation
Last Answer : C. Stereo multiplexing
Description : DWDM stands for: a. Digital Wavelength-Division Modulation b. Dense Wavelength-Division Modulation c. Double Wavelength-Division Modulation d. Dense Wavelength-Division Multiplexing
Last Answer : d. Dense Wavelength-Division Multiplexing
Description : Which of the following statements is correct for the use of packet switching? A. the subdivision of information into individuallyaddressed packets in conjunction with alternativerouting arrangementenabled the transmission path ... capacity could be achieved. D. All of theabove E. None of the above
Last Answer : All of theabove
Description : Inan HFC network, the upstream data are modulated using the _______ modulation technique. A) QAM B) QPSK C) PCM D) ASK
Last Answer : QPSK
Description : Inan HFC network, the downstream data are modulated using the _______ modulation technique. A) PSK B) QAM C) PCM D) ASK
Last Answer : QAM
Description : DMT is a modulation technique that combineselements of _______ and _______. A) FDM; TDM B) QDM; QAM C) FDM; QAM D) PSK; FSK
Last Answer : FDM; QAM
Description : In a fiber-optic cable, the signal is propagatedalong theinner core by _______. A) reflection B) refraction C) modulation D) none of the above
Last Answer : reflection
Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit
Last Answer : High-leveldata link control
Description : The word______ refers to the portion of a _______ that carriesa transmission. A) channel; link B) link; channel C) line; channel D) line; link
Last Answer : channel; link
Description : _____ isa digital multiplexing technique for combiningseveral low-ratechannels into onehigh-rate one. A) FDM B) TDM C) WDM D) None of the above
Last Answer : TDM
Description : _____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above
Last Answer : WDM
Description : ________ can beachievedbyusing multiplexing; ______ canbe achieved by using spreading. A) Efficiency; privacy and antijamming B) Privacyand antijamming;efficiency C) Privacyand efficiency; antijamming D) Efficiency and antijamming; privacy
Last Answer : Efficiency; privacy and antijammin
Description : Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above
Description : Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above
Last Answer : FDM
Description : Which multiplexing technique transmits digital signals? A) FDM B) TDM C) WDM D) None of the above
Description : Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)
Last Answer : (a) and (c)
Description : In ATM, the ______ layerprovides routing, traffic management, switching, and multiplexing services. A) physical B) ATM C) AAL D) none of the above
Last Answer : ATM
Description : What are the functions of the transport layer? a. Multiplexing/ Demultiplexing b. Connection less Services c. Connection oriented service d. Congestion control
Last Answer : a. Multiplexing/ Demultiplexing
Description : In a ________ connection, three or more devices share a link. A) multipoint B) point-to-point C) (a) and(b) D) none of the above
Description : Three or more devices share a link in ________ connection. a) Unipoint b) Multipoint c) Point to point d) Simplex
Last Answer : b) Multipoint
Description : Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a ... versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D
Last Answer : b. A,B,C
Description : The functions of a Logical Link Layer (LLC) are a. Error control b. Flow control c. Creating and managing the communication link between two devices with the help of the Transport layer. d. All the above
Last Answer : d. All the above
Description : The functions of a Logical Link Layer (LLC) are ___. A. Error control B. Flow control C. Creating and managing the communication link between two devices with the help of the Transport layer. D. All the above
Last Answer : D. All the above
Description : The two sublayers of a Data Link layer are a. LLC Logical Link Control Layer b. MAC Medium Access Control Layer c. Both A and B d. Data Layer
Last Answer : c. Both A and B
Description : Which sublayer of the data link layer performs data link functions that depend upon the type of medium? a. logical link control sublayer b. media access control sublayer c. network interface control sublayer d. error control sublayer
Last Answer : b. media access control sublayer
Description : Identify the non suitable medium for 802.3 ethernet? a. A thin coaxial cable b. A twisted pair cable c. A microwave link d. A fiber optical cable
Last Answer : c. A microwave link
Description : Which sublayer of the data link layer performs data link functions that depend upon the type of medium? A. logical link control sublayer B. media access control sublayer C. network interface control sublayer D. error control sublayer
Last Answer : B. media access control sublayer
Description : Which of the following cannot be used as a medium for 802.3 ethernet? a) A thin coaxial cable b) A twisted pair cable c) A microwave link d) A fiber optical cable
Last Answer : c) A microwave link
Description : The physical layer is responsible for _____ a) line coding b) channel coding c) modulation d) all of the mentioned
Last Answer : d) all of the mentioned
Description : The ASCII encoding of binary data is called a. base 64 encoding b. base 32 encoding c. base 16 encoding d. base 8 encoding
Last Answer : a. base 64 encoding
Description : Bluetooth is a _______ technology that connects devices (called gadgets) ina small area. A) wired LAN B) wirelessLAN C) VLAN D) none of the above
Last Answer : wirelessLAN
Description : Given the following statements: (a) Frequency Division Multiplexing is a technique that can be applied when the bandwidth of a link is greater than combined bandwidth of signals to be transmitted. (b) Wavelength Division Multiplexing (WDM) ... c) is true. (D) (a), (b) and (d) are true; (c) is false.
Last Answer : (D) (a), (b) and (d) are true; (c) is false.
Description : Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester
Last Answer : Manchester
Description : In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above
Last Answer : synchronization
Description : Which encoding method uses alternating positive and negative values for1s? A) NRZ-I B) RZ C) Manchester D) AMI
Last Answer : AMI
Description : Which of the following encoding methods does not provide for synchronization? A) NRZ-L B) RZ C) NRZ-I D) Manchester
Last Answer : NRZ-L