Define critical frequency w.r. to wave propagation.

Define critical frequency w.r. to wave propagation.
by

1 Answer

Answer :

Define critical frequency w.r. to wave propagation.

image

by

Related questions

Compare ground wave and space wave propagation on the basis of: (i) Frequency range (ii) Method of propagation.

Description : Compare ground wave and space wave propagation on the basis of: (i) Frequency range (ii) Method of propagation.

Last Answer : Compare ground wave and space wave propagation on the basis of: (i) Frequency range (ii) Method of propagation.

Explain virtual height with respect to wave propagation with neat sketch.

Description : Explain virtual height with respect to wave propagation with neat sketch.

Last Answer : In ionization layer the incident wave refracts and bends down gradually than sharply.   The incident and refracted rays follow paths that are exactly the same as they would have been if reflection had taken place from a surface located at a greater height called virtual height of this layer. 

Compare ground wave propagation. Sky wave propagation and space wave propagation.

Description : Compare ground wave propagation. Sky wave propagation and space wave propagation.

Last Answer : Sr. N o Parameter Ground Wave Propagation Sky Wave Propagation Space wave Propagation 1 Frequency Range 30 kHz to 3 MHz  3 MHz to 30 MHz frequencies above 30 MHz 2 ... These waves have line of sight propagation, ... 6 Fading Problem less Severe Less

Describe the effect of ionosphere on sky wave propagation.

Description : Describe the effect of ionosphere on sky wave propagation.

Last Answer : The Ionosphere is the upper portion of the atmosphere. The ultra violet radiation from the sun will ionize the upper layer of the atmosphere. In this layer free electrons and positive and negative ions are ... layer. Its Frequency Range is from 3 MHz to 30 MHz Polarization: Vertical.  

Explain the transverse electromagnetic waves in wave propagation.

Description : Explain the transverse electromagnetic waves in wave propagation.

Last Answer : 1. The electromagnetic waves are oscillations, which propagate through free space. 2. Em wave travel in free space at the speed of light. 3. Figure shows the simple EM wave, in which the direction of ... electromagnetic waves (TEM). Diagram:- Transverse electromagnetic wave(TEM) OR

Explain the following in wave propagation: 1) Actual height 2) Virtual height

Description : Explain the following in wave propagation: 1) Actual height 2) Virtual height

Last Answer : 1) Actual height:- The height attained by the wave during propagation through the ionosphere is known as Actual height. 2)Virtual height: -The incident wave returns back to the earth due to ... It is also defined as the maximum height that the hypothetical reflected wave would have reached.

Define electromagnetic wave and polarization.

Description : Define electromagnetic wave and polarization.

Last Answer : Electromagnetic wave:-An electromagnetic wave such as light consists of a coupled oscillating electric field and magnetic field which are always perpendicular; by convention Polarization:-polarization" of electromagnetic waves refers to the direction of the electric field.

Define standing wave ratio.

Description : Define standing wave ratio. 

Last Answer : Standing wave ratio is defined as the ratio of maximum voltage (Vmax) to minimum voltage (Vmin). Standing wave ratio is also defined as the ratio of maximum current (Imax) to minimum current (Imin).

Explain duct propagation with neat sketch.

Description : Explain duct propagation with neat sketch.

Last Answer : Duct propagation is a special type and used for very high microwave frequencies. New phenomenon which occurs in super-refraction, also known as ducting. As the height above earth increases, ... in the standard atmosphere. The Duct propagation is used for very high frequencies in GHz range.

Describe line of sight propagation in brief.

Description : Describe line of sight propagation in brief.

Last Answer : Line of sight propagation or Space wave propagation:-   Explanation:- Space wave propagation of electromagnetic energy includes radiated energy that travels in the lower few miles of Earth's ... waves reflected by Earth's surface as they propagate between the transmit and receive antennas. 

A telephone cable has following primary constants per loop kilometer ,R=30Ω, L=20mH,C=0.06µF,G=0.If the applied signal has an angular frequency of 5000 rad/sec.., Determine (i) Characteristics impedence (ii) Attenuation constant

Description : A telephone cable has following primary constants per loop kilometer ,R=30Ω, L=20mH,C=0.06µF,G=0.If the applied signal has an angular frequency of 5000 rad/sec.., Determine (i) Characteristics impedence (ii) Attenuation constant

Last Answer : A telephone cable has following primary constants per loop kilometer ,R=30Ω, L=20mH,C=0.06µF,G=0.If the applied signal has an angular frequency of 5000 rad/sec.., Determine (i) Characteristics impedence (ii) Attenuation constant

Define: 1)Frequency 2)Bandwidth 3)Wavelength 4)Time period

Description : Define: 1)Frequency 2)Bandwidth 3)Wavelength 4)Time period

Last Answer : Frequency: Frequency is the number of cycles per second. Bandwidth: A range of frequencies within a given band, in particular that used for transmitting a signal. Wavelength: Wavelength can be defined as ... for one complete cycle of vibration to pass a given point.  OR Time period=1/frequency

Define: (i) Image frequency and (ii) Double spotting

Description : Define: (i) Image frequency and (ii) Double spotting

Last Answer : i)Image frequency:- Image Frequency is defined as the signal frequency plus twice the intermediate frequency. It is denoted as fsi = fs+2fi Where, fs = Signal Frequency fi =intermediate frequency ... It is due to the poor front end selectivity i.e., inadequate image frequency rejection.

Define the terms: 1) Maximum usable frequency 2) Fading

Description : Define the terms: 1) Maximum usable frequency 2) Fading

Last Answer : 1)Maximum usable frequency:- Maximum usable frequency is defined as the limiting frequency ,when the angle of incidence is other than the normal . OR The highest frequency that can be used for sky ... which left the same source but arrived at the destination by different paths is known as fading.

Compare sky wave and space wave propagation w.r.t. following points. (i) Frequency range (ii) Effect of fading (iii)Polarization (iv)Application

Description : Compare sky wave and space wave propagation w.r.t. following points. (i) Frequency range (ii) Effect of fading (iii)Polarization (iv)Application

Last Answer : Sr. No  Parameters Sky Wave Propagation Space Wave Propagation 1 Frequency range 3 MHz to 30 MHz  Above 30 MHz 2 Effect of fading Problem of fading is ... horizontally Polarized 4 Application RadioBroadcasting (SW Range) Used for TV and FM broadcasting

A load of 200 ohm is used to match 300 ohm transmission line to achieve SWR=1. Find out the required characteristic impedance of a quarter of a quarter wave transformer connected directly to the load.

Description : A load of 200 ohm is used to match 300 ohm transmission line to achieve SWR=1. Find out the required characteristic impedance of a quarter of a quarter wave transformer connected directly to the load.

Last Answer : Solution :

Explain ground wave propogation with neat sketch.

Description : Explain ground wave propogation with neat sketch. 

Last Answer : Sketch-   Explanationi) It consists of direct wave which travels near the ground from Transmitter to Receiver. ii) The electromagnetic wave leaves the transmitting antenna & remains close to earth surface ... . The ground wave is the path chosen when frequency in between 30 KHz & 3 MHz 

Why electromagnetic waves are said to be transverse wave ? Explain.

Description : Why electromagnetic waves are said to be transverse wave ? Explain.

Last Answer : The electromagnetic waves are oscillations which propagate through free space. In electromagnetic waves the direction of electric field, magnetic field & propagation are mutually perpendicular. Hence electromagnetic waves are called as transverse wave.

How quarter wave transformer is used for impedance matching.

Description : How quarter wave transformer is used for impedance matching. 

Last Answer : In all applications of transmission line, it is required that the load be matched to line, Which requires tuning out the unwanted load reactance and the transformation of resulting impedance to the required value ... Step down transformer If ZL <Zo then it acts as a Step up transformer  

Describe the term virtual height with the help of diagram showing ionized layer and the path of wave.

Description : Describe the term virtual height with the help of diagram showing ionized layer and the path of wave.

Last Answer : Virtual height: -The incident wave returns back to the earth due to refraction. In this process it bends down gradually and not sharply, but the incident and reflected rays follow exactly ... . It is also defined as the maximum height that the hypothetical reflected wave would have reached. 

For transmission line, the incident voltage Ei = 6V, and Er = 3V. Calculate: (1) Reflection coefficient (2) Standing wave ratio

Description : For transmission line, the incident voltage Ei = 6V, and Er = 3V. Calculate: (1) Reflection coefficient (2) Standing wave ratio

Last Answer : (1)Reflection coefficient  (2) Standing wave ratio (1)Reflection coefficient Reflection coefficient R=Er/Ei  =3/6  R=0.5 (2) Standing wave ratio SWR=Ei+Er/Ei-Er  =6+3/6-3  SWR =3

List and explain the properties of quarter wave transformer.

Description : List and explain the properties of quarter wave transformer.

Last Answer : Properties of quarter wave transformer: 1. Impedance transfomation: it provides impedance transformation upto the highest frequencies and is compatible with transmission line. 2. Impedance inversion: if ZL is ... or step up transformer,depending on whether ZL IS greater than or less than ZO.

Draw the radiation pattern for Dipole antenna: (i) Half wave dipole (ii) Folded dipole.

Description : Draw the radiation pattern for Dipole antenna: (i) Half wave dipole (ii) Folded dipole.

Last Answer : The radiation pattern for Half wave dipole antenna The radiation pattern for Folded dipole antenna.

Define fading w.r.t. wave propagation.

Description : Define fading w.r.t. wave propagation. 

Last Answer : Fading: The fluctuation in signal strength at a receiver, which is mainly due to the interference of two waves which left the same source but arrived at the destination by different paths, is known as fading. 

To obtain the most reliable sky wave propagation the ____ should be used. A. Lowest useable frequency (LUF). B. Maximum useable frequency (MUF). C. Optimum useable frequency (OUF). D. Critical frequency

Description : To obtain the most reliable sky wave propagation the ____ should be used. A. Lowest useable frequency (LUF). B. Maximum useable frequency (MUF). C. Optimum useable frequency (OUF). D. Critical frequency

Last Answer : C. Optimum useable frequency (OUF).

Distancesnearthe skip distance should beused forthe sky-wave propagation a. to avoid tilting b.topreventsky-wave andupper rayinterference c. to avoid the Faraday effect d. so as nor to exceed the critical frequency

Description : Distancesnearthe skip distance should beused forthe sky-wave propagation a. to avoid tilting b.topreventsky-wave andupper rayinterference c. to avoid the Faraday effect d. so as nor to exceed the critical frequency

Last Answer : b.topreventsky-wave andupper rayinterference

A superheterodyne radio receiver with an IF of 455KHZ is turned to 1000KHZ. Find: (i) Image frequency (ii) Local oscillator frequency

Description : A superheterodyne radio receiver with an IF of 455KHZ is turned to 1000KHZ. Find: (i) Image frequency (ii) Local oscillator frequency

Last Answer : Given Intermediate Frequency fi=455KHz Signal frequency =fs=1000KHz Local oscillator frequency fo=fs+fi  Fo=1000KHz+455KHz  =1455KHz Image frequency is the input frequency which produces the same intermediate frequency fsi=fs+2fi  =1000KHz+2*455KHz  =1910KHz 

Why should local oscillator frequency be greater than signal frequency in AM receiver? Also explain why IF has constant value?

Description : Why should local oscillator frequency be greater than signal frequency in AM receiver? Also explain why IF has constant value?

Last Answer : Reason for LO frequency to be greater than signal frequency The local oscillator frequency (f0) is made greater than signal frequency (Fs) in radio receiver: Local oscillator frequency range is 995 ... frequency of desired signal because the IF is constant and same for all the incoming RF signal.

In a FM system, the maximum deviation is 75KHz. Find bandwidth for modulating frequency i. fm=500Hz ii. fm=5KHz iii. fm=10KHz Draw conclusion for bandwidth of FM from answer.

Description : In a FM system, the maximum deviation is 75KHz. Find bandwidth for modulating frequency i. fm=500Hz ii. fm=5KHz iii. fm=10KHz Draw conclusion for bandwidth of FM from answer.

Last Answer : Given deviation∆=75kHz i) fm=500Hz bandwidth B.W=2(∆+fm)  =2(75k+500)=151kHz  ii). fm=5KHz bandwidth B.W=2(∆+fm)  =2(75k+5k)=160KHz iii) fm=10KHz bandwidth B.W=2(∆+fm)  =2(75k+10k)=170KHz As the modulating frequency increases bandwidth also increases.

A super heterodyne AM receiver is tuned to a station operating at 1200 KHz .Find local oscillator frequency and image frequency.

Description : A super heterodyne AM receiver is tuned to a station operating at 1200 KHz .Find local oscillator frequency and image frequency.

Last Answer : A super heterodyne AM receiver is tuned to a station operating at 1200 KHz Intermediate frequency is 455KHz. IF frequency=f0-fs Local oscillator frequency is f0=IF +fs=455K+1200K=1655kHz The image frequency which gives the same IF is f0+2*IF=2110KHz

State the IF frequency and bandwidth of FM receiver.

Description : State the IF frequency and bandwidth of FM receiver.

Last Answer : IF for FM receiver: 10.7 MHz. Bandwidth of FM receiver:88MHz to 108 MHz

State the frequency range for audio frequency and voice frequency.

Description : State the frequency range for audio frequency and voice frequency.

Last Answer : The generally accepted standard range of audible frequencies is 20 to 20,000 Hz, The usable voice frequency band ranges from approximately 300 Hz to 3400 Hz.

Explain any four different frequency bands and give their two applications of each.

Description : Explain any four different frequency bands and give their two applications of each.

Last Answer : Explain any four different frequency bands and give their two applications of each.

Write down different frequencies for following(frequency ranges). (1) Voice frequency (2) High frequency (3) IR frequency (4) Visible frequency(light)

Description : Write down different frequencies for following(frequency ranges). (1) Voice frequency (2) High frequency (3) IR frequency (4) Visible frequency(light)

Last Answer : Sr. No Frequency Range 1 Voice Frequency 300 Hz to 3kHz 2 High Frequency  3 MHz to 30 MHz 3 IR Frequency 30 THz to 430 THz 4 Visible Spectrum (light) 375 THz to 750 THz

Draw amplitude modulated waveform in time domain and frequency domain with proper labeling.

Description : Draw amplitude modulated waveform in time domain and frequency domain with proper labeling.

Last Answer : AM in Time domain  AM in frequency domain

Calculate the characteristics impedance for a transmission line having L=0.5 mH/Km, C=0.08 µF and negligible R and G.

Description : Calculate the characteristics impedance for a transmission line having L=0.5 mH/Km, C=0.08 µF and negligible R and G.

Last Answer : L=0.5 mH/Km C=0.08 µF

a) For a transmission line, Find SWR and reflection coefficient R if, i. There is no reflected voltage. ii. Reflected voltage and incident voltage is equal. iii. If reflected voltage=20V and incident voltage=10V. iv. If reflected voltage=10V and incident voltage =20V.

Description : a) For a transmission line, Find SWR and reflection coefficient R if, i. There is no reflected voltage. ii. Reflected voltage and incident voltage is equal. iii. If reflected voltage=20V and incident voltage=10V. iv. If reflected voltage=10V and incident voltage =20V.

Last Answer : reflection coefficient R=Vr/Vi i. There is no reflected voltage. i.e,Vr=0 R=0 SWR= 1+R/1-R=1 ii. Reflected voltage and incident voltage is equal. Vr=Vi; R=1 SWR= 1+R/1-R=1+1/1-1=infinity iii. If reflected ... and incident voltage =20V. Vr=10 and Vi=20 R=10/20=0.5 SWR= 1+R/1-R=1+.5/1-.5=3 

The parameters of Transmission line are R = 50 Ω/ km, L= 1mH/km ,C = 0.1µf/km, G = 2µV/km. calculate characteristic impedance.

Description : The parameters of Transmission line are R = 50 Ω/ km, L= 1mH/km ,C = 0.1µf/km, G = 2µV/km. calculate characteristic impedance.

Last Answer : The parameters of Transmission line are R = 50 Ω/ km, L= 1mH/km ,C = 0.1µf/km, G = 2µV/km. calculate characteristic impedance.

Define the following terms related to antennas; (i) Antenna resistance (ii) Directivity (iii) Antenna gain (iv) Power density

Description : Define the following terms related to antennas; (i) Antenna resistance (ii) Directivity (iii) Antenna gain (iv) Power density

Last Answer : Antenna Resistance - The resistance of an antenna has two components: 1. Its radiation resistance due to conversion of power into electromagnetic waves 2. The resistance due to actual losses in the ... the transmitter power divided by the surface area of a sphere (4πR2) at that distance.

Define and explain the term beam width related to antenna with a sketch.

Description : Define and explain the term beam width related to antenna with a sketch.

Last Answer : Definition: The beam width of an antenna is described as the angles created by comparing the half power point (3dB) on the main radiation lobe to its maximum power point. As an example the beam width ... max voltage at center of lobe (these point are known as half power points.) Sketch-  

Define VSWR with refernce to standing waves.

Description : Define VSWR with refernce to standing waves.

Last Answer : Voltage Standing Wave Ratio: The voltage standing wave ratio (VSWR) is the ratio of max voltage to min voltage. VSWR= VMAX /VMIN

Define sensitivity with graph.

Description : Define sensitivity with graph.

Last Answer : Define sensitivity with graph.

Define PAM, PWM, and PPM. Draw waveforms.

Description : Define PAM, PWM, and PPM. Draw waveforms.

Last Answer : Pulse amplitude modulation is defined as a process of varying the amplitude of the carrier pulse in accordance to the modulating signal variations. Pulse width modulation is defined as a ... of varying the position of the carrier pulse, in accordance to the modulating signal variations.

Define the transmission line? Draw it‟s general equivalent circuit.

Description : Define the transmission line? Draw it‟s general equivalent circuit.

Last Answer : Transmission line: A conductor or conductors designed to carry electricity or an electrical signal over large distances with minimum losses and distortion.  Equivalent circuit:

State the types of electromagnetic polarization? Define any one of it.

Description : State the types of electromagnetic polarization? Define any one of it.

Last Answer : Transverse electromagnetic wave:- The polarization of a plane EM wave is simply the orientation of the electric field vector with respect to the surface (i.e. looking at the horizon) If ... the field strength varies with change in polarization the wave is said to have an elliptical polarization 

Define modulation? State the desirable value of modulation index of AM.

Description : Define modulation? State the desirable value of modulation index of AM.

Last Answer : Modulation: It is the process in which any of these Parameters (Amplitude, Frequency, Phase) of high frequency signal (carrier signal) are varied in accordance with low frequency signal(modulating signal) For an AM, modulation index range is 0 to 1.

Define stub. Explain single and double stub in brief with neat sketch.

Description : Define stub. Explain single and double stub in brief with neat sketch.

Last Answer : Stub:- Stub is the piece of short circuited transmission line which is used to tune out the reactance of the load when connected across the transmission line as close as possible ... but lengths are independently adjustable. The double stub matching provides wide range of impedance matching. 

Define fading? List the causes.

Description : Define fading? List the causes.

Last Answer : The fluctuation in signal strength at a receiver, which is mainly due to the interference of two waves which left the same source but arrived at the destination by different paths, is known ... , such as irrigation, or from multiple transmission paths, irregular earth surfaces, and varying terrains.

Define the term baluns and explain where is it used?

Description : Define the term baluns and explain where is it used?

Last Answer : A type of electrical transformer used to connect an unbalanced circuit to a balanced oneORA balun is a type of transformer: it's used to convert an unbalanced signal to a balanced ... :- In audio applications, baluns convert between high-impedance unbalanced and low impedance balanced lines.

Define selectivity and sensitivity of AM Receiver.

Description : Define selectivity and sensitivity of AM Receiver. 

Last Answer : Selectivity:-It needs to accept signals of the wanted frequency and reject other unwanted frequencies. Sensitivity:-The sensitivity of a radio receiver is its ability to amplify weak signals. It is ... the receiver input terminals to give a standard output power, measured at the output terminals.