Describe construction and working of hydrogen oxygen fuel cell.

Describe construction and working of hydrogen oxygen fuel cell.
by

1 Answer

Answer :

image

Construction:-

1. It consists essentially of an electrolytic solution such as 25% KOH or NaOH solution, & two inert porous electrodes (like porous carbon) containing suitable catalyst.

2. Hydrogen & oxygen gases are bubbled through the anode & cathode compartment respectively.


image
by

Related questions

Describe construction and working of H2-O2 fuel cell.

Description : Describe construction and working of H2-O2 fuel cell.

Last Answer : Construction :- )One of the simplest & most successful fuel cell is hydrogen oxygen fuel cell. ii) It consists essentially of an electrolytic solution such as 25% KOH or NaOH ... . Hydrogen & oxygen gases are bubbled through the anode & cathode compartment respectively.

Describe construction and working of Daniel cell.

Description : Describe construction and working of Daniel cell.

Last Answer : Answer : Construction: It consists of zinc electrode dipped in ZnSO4 Solution & Copper electrode dipped in CuSO4 solution. The two solutions are separated by a porous pot. The two solutions can seep ... as Cu & hence copper electrode becomes positively charged. The emf of cell is 1.1 volt.

Describe construction and working of dry cell.

Description : Describe construction and working of dry cell.

Last Answer : Construction: It consists of zinc container (vessel) which acts as an anode. Cathode is a Graphite rod. It acts as inert electrode. The Graphite rod is surrounded by a paste of MnO2 (Manganese dioxide) ... Working At zinc anode: - Dissolution of zinc electrode to form zinc ions

Explain the construction and working of Lead acid storage cell with the help of diagram.

Description : Explain the construction and working of Lead acid storage cell with the help of diagram.

Last Answer : Construction  i)A group of lead plates packed with spongy lead serves as anode (negative electrode). ii) Another group of lead plates bearing lead dioxide serve as cathode (positive electrode).The two ... 38% ( by mass) of H2SO4 of density about 1.2 g/ml which serve as electrolyte.

Explain construction and working of Ni- Cd cell with diagram.

Description : Explain construction and working of Ni- Cd cell with diagram.

Last Answer : Construction: i) Positive plates are made up of nickel plated tubes, containing a mixture of nickel oxide (NiO2) & hydroxide + 17% flakes of graphite or metallic nickel for increasing ... which small quantity of lithium hydroxide (LiOH) is added to increase the capacity of cell.

Describe the hydrogen evolution mechanism of immersed corrosion

Description : Describe the hydrogen evolution mechanism of immersed corrosion

Last Answer : Steel tank: - Anode Cu - strip:- Cathode These types of corrosion occur usually in acidic environments, like industrial waste, solutions of non - oxidizing acids (like HCl). Process: A ... steel tank in contact with copper is corroded most with the evolution of hydrogen gas. 

Explain fuel cell. State two advantages.

Description : Explain fuel cell. State two advantages.

Last Answer : Fuel cell- Fuel cell is a electrochemical cell which converts the chemical energy of fuels directly into electrical energy by an electrochemical process in which the fuel is oxidized at the ... fossil fuels 15. Fuel cell automotive batteries can render electric vehicles efficient & refillable  

Show the fuel cell differ from battery. What are the advantages of fuel cell?

Description : Show the fuel cell differ from battery. What are the advantages of fuel cell?

Last Answer : Fuel cell : Fuel cell is an electrochemical cellwhich converts the chemical enrgy of fuel directly into the electrical energy by an electrochemical process, in whichthe fuel is oxidised at ... fossil fuels 15. Fuel cell automotive batteries can render electric vehicles efficient & refillable 

Define fuel cell. Give the advantages and limitations of H2-O2 fuel cell.

Description : Define fuel cell. Give the advantages and limitations of H2-O2 fuel cell.

Last Answer : Fuel cell: Fuel cell is an electrochemical cell which converts the chemical energy of fuel directly into the electrical energy by an electrochemical process, in which the fuel is oxidized at the anode. OR ... requires 30% of the stored energy. 7. Life span of the cells is not accurately known.

Write the mechanism of corrosion of metal due to action of oxygen.

Description : Write the mechanism of corrosion of metal due to action of oxygen.

Last Answer : Mechanism: Metallic surfaces when exposed to air undergo oxidation and the process of corrosion is represented by the equation.   A thin oxide layer is formed on the metal surface and the nature of this film decides further action depending upon the film so produced.   

Describe metal spraying process for protection of metal from corrosion .Write its two applications.

Description : Describe metal spraying process for protection of metal from corrosion .Write its two applications.

Last Answer : Process:- i) In this method, coating metal sprayed on the surface of base metal with the help of spraying gun or pistol. ii) The spraying gun consist of a duct for compressed air and is fitted with the oxy- ... 4) Coating of metals like Al, Zn, Ni, Sn, Pb etc. is made by the method of spraying.

Describe galvanizing process with suitable diagram.

Description : Describe galvanizing process with suitable diagram.

Last Answer : It is the process of coating iron or steel sheets with a thin coat of zinc to prevent it from rusting. Process: The iron or steel sheet to be galvanized is first cleaned with dilute ... rollers to remove excess zinc and in order to get uniform coating. Finally it is annealed at 6500C. 

Describe electrolytic reduction of alumina.

Description : Describe electrolytic reduction of alumina.

Last Answer : i) Aluminium is extracted from alumina by electrolysis of mixture of alumina (20%) , Cryolite (60%) & Calcium fluoride (20%). Addition of cryolite& fluorspar not only makes alumina a ... set free at the cathode is removed periodically in the molten condition from bottom of the cell.

Define cementation. Describe sherardizing with help of neat labeled diagram

Description : Define cementation. Describe sherardizing with help of neat labeled diagram

Last Answer : Cementation: Cementation is the process in which metal coatings are obtained by heating the base metal in a revolving drum containing a powder of the coating metal.   Process: i) The iron articles ... iron forming Fe - Zn alloy at the surface which protects iron surface from corrosion.   

Describe Bessemerisation process with the help of chemical reaction & diagram.

Description : Describe Bessemerisation process with the help of chemical reaction & diagram. 

Last Answer : After smelting the molten matte is then transferred to a Bessemer converter which is a pear shaped furnace made up of steel and internally lined with lime or magnesia. It is mounted on trunnions and can be ... surface of copper hence it is called as blister copper. It is 96 to 98% pure.  

Describe Bessemerization process with neat labeled diagram

Description : Describe Bessemerization process with neat labeled diagram 

Last Answer : After smelting the molten matte is then transferred to a Bessemer converter which is a pear shaped furnace made up of steel and internally lined with lime or magnesia. It is mounted on trunnions and can ... on the surface of copper hence it is called as blister copper. It is 96 to 98% pure

Describe the tinning process. Write its two applications.

Description : Describe the tinning process. Write its two applications.

Last Answer : Tinning: -The process of covering iron or steel sheets with a thin coat of tin to prevent it from rusting is called as tinning.   Process: i) The sheet of steel to be ... Tinned copper sheets are used for cooking utensils and refrigeration equipment. Cu tubes are used in refrigeration. 

Describe the process of purification of aluminium by electrolytic refining with the help of neat, labelled diagram.

Description : Describe the process of purification of aluminium by electrolytic refining with the help of neat, labelled diagram.

Last Answer : Process: 1) The electrolytic cell consists of an iron tank lined at the bottom with carbon, which serve as anode. A number of graphite rods serve as cathode. 2) The cell is filled with ... . Crude or impure Al is added to the bottom layer from time to time. The process is thus continued.

Describe smelting process with neat labeled diagram.

Description : Describe smelting process with neat labeled diagram.

Last Answer : Roasted copper ore is then mixed with coke & sand particles & then strongly heated at about 13500 C in a water jacketed blast furnace. At high temperature ferrous sulphide (FeS) is oxidised & ... of ferrous sulphide (FeS) is called as matte which is then removed from the lower outlet.

State two applications of lead acid storage cell.

Description : State two applications of lead acid storage cell.

Last Answer : Applications of lead acid storage cell: 1. Lead acid storage cellis commonly used in automobiles. 2. To Supply current for electric vehicles 3. In Gas engine ignition 4. In telephone exchanges ... hospitals 7. In broad casting stations, power stations 8. For distribution work 9. In inverters

Explain discharging and charging process of lead acid storage cell.

Description : Explain discharging and charging process of lead acid storage cell. 

Last Answer : Discharging: - While discharging chemical energy gets converted into electrical energy. At anode: - The lead electrode loses electrons, which flow through the wire.   Lead sulphate is precipited at ... are reversed by passing an external e.m.f. greater than 2 volts from a generator.  

Why does a dry cell became dead after a long time even if it has been not used?

Description : Why does a dry cell became dead after a long time even if it has been not used?

Last Answer : Dry cell become dead after a long time, even if it has not been used because acidic NH4Cl corrodes the zinc vessel.

Distinguish between primary cell and secondary cell.

Description : Distinguish between primary cell and secondary cell.

Last Answer : Distinguish between primary cell and secondary cell.

Write two properties and two uses of Bakelite.

Description : Write two properties and two uses of Bakelite.

Last Answer : Properties Uses Hard,Rigid,strong,scratch resistant & brittle material. insulation of electrical wires & cables electrical switches, switch board sockets, plugs for ... Rolling mills, Decorative laminates wall covering & industrial laminates for electrical parts. 

Define charging, discharging, specific resistance and Ohm’s law.

Description : Define charging, discharging, specific resistance and Ohm’s law.

Last Answer : Charging:- It is the operation of the cell in which external source of current reverses the electrochemical cell reaction in order to restore the battery to its original fully charged state. ... across the conductor & inversely proportional to the resistance (R) of a conductor. 

Define extrinsic polymers with example.

Description : Define extrinsic polymers with example.

Last Answer : Extrinsic polymer- The electrical conductivity of polymers can be increased by doping with a charge transfer agent or by making their composites with other conducting materials like ... called as extrinsic polymer  Examples-Trans-polyacetylene, polyparaphenylene, polypyrrole, polyaniline etc. 

State the two methods of Hot dipping.

Description : State the two methods of Hot dipping. 

Last Answer : Two methods of hot dipping-1. Galvanizing 2. Tinning

Write the action of Nitric acid on Aluminium.

Description : Write the action of Nitric acid on Aluminium.

Last Answer : Aluminium metal does not react with dilute as well as concentrated Nitric acid 

Define the term metallurgy. Name the process of extraction of Aluminium.

Description : Define the term metallurgy. Name the process of extraction of Aluminium. 

Last Answer : Metallurgy:-The process of extraction of metal from its ore economically & profitably is called as metallurgy. The process used for extraction of Aluminium metal is Bayer’s process, Electrolytic reduction of alumina, Electrolytic refining. 

What are applications of sherardizing process?

Description : What are applications of sherardizing process?

Last Answer : Applications:- i)Sherardizing is used especially for protecting small odd shaped steel articles like bolts, screws, nuts, threaded parts washers, valves, gauge, tools etc.against atmospheric corrosion. ... has crevices or depression and there is practically no change in the dimensions of articles.

State the two functions of pigment.

Description : State the two functions of pigment.

Last Answer : 1) Provide opacity and colour to paint film. 2) Give strength to the film. 3) Give protection to the paint film by reflecting harmful ultraviolet light. 4) Provide resistance to paint film against abrasion, ... and weather. 5) Give an aesthetical appeal (i.e pleasing to look at) to the paint film.

Define immersed corrosion.

Description : Define immersed corrosion.

Last Answer : Definition: The corrosion which is brought about through ionic reactions in the presence of moisture or solution as a conducting medium when two dissimilar metals are in contact with each other is called electro chemical corrosion. 

State two properties and two uses of silicone fluids.

Description : State two properties and two uses of silicone fluids.

Last Answer : Properties :- 1. They can be used in temperature range of -90 0C to 220 0C 2. They have excellent dielectric properties over a wide range of temperature 3. They have ... release material: an odourless, non-toxic, noncarbonizing moulds release for rubber, plastics and metal die castings.

Define liquid crystal polymers.

Description : Define liquid crystal polymers.

Last Answer : Liquid crystal polymers are a class of aromatic polyester polymers which are capable of forming regions of highly ordered structure (like crystal) even in the liquid phase.

Define electrochemical corrosion.

Description : Define electrochemical corrosion.

Last Answer : Electrochemical corrosion:- The corrosion which is brought about through ionic reactions in the presence of moisture or solution as a conducting medium when two dissimilar metals are in contact with each other is called electro chemical corrosion. 

Write two characteristics and two uses of Ni-Cd battery.

Description : Write two characteristics and two uses of Ni-Cd battery.

Last Answer : Characteristics: 1. The e.m.f. of cell is 1.4 V when fully charged. 2. It has low internal resistance & longer life span (5 years). 3. It is expensive in cost. 4. It can be ... lighting and air conditioning because of its long life & low maintenance cost. 3. It is widely used in calculators.

Write two applications and two properties of Rose metal.

Description : Write two applications and two properties of Rose metal.

Last Answer : Properties: 1. It is easily fusible alloy. 2. It’s melting point is 89 0C. Applications: 1. It is used for making fire – alarms, fuses wires. 2. It is used for casting dental works 3. It is used in automatic sprinkler system.

Define specific conductance. Write its unit.

Description : Define specific conductance. Write its unit.

Last Answer : Specific conductance is the conductance offered by 1 cm3 of the substance or 1ml solution.  OR The conductance offered by a solution or a conducting material having unit length & unit area of cross ... conductance. Unit of specific conductance: ohm-1 cm-1 or mhos-cm-1 or S.cm-1

Which oxide film is most protective against corrosion? Why?

Description : Which oxide film is most protective against corrosion? Why?

Last Answer : Non-porous stable oxide film is most protective oxide film. This oxide film is extremely adherent and non-porous (protective). Due to the absence of pores or cracks in the oxide film, it forms barrier for further action and therefore, the rate of corrosion of metal decreases rapidly. 

Write the action of water on Aluminium.

Description : Write the action of water on Aluminium.

Last Answer : Pure aluminium is not affected by pure water. However, impure aluminium is readily corroded by water containing salts (seawater). It decomposes boiling water with evolution of hydrogen.

Write two applications of copper.

Description : Write two applications of copper.

Last Answer : 1) For making electrical wires, cables and conducting apparatus. 2) As a coinage metal and in ornaments, jewelry for making them hard. 3) For making water stills, kettles, vacuum pans, steam pipes ... such as hypsometers, colorimeters, etc. 7) For making alloys like brass, bronze, gun metal, etc.

Define the following: Electrolyte, conductivity of electrolytes, specific conductance and equivalent conductance.

Description : Define the following: Electrolyte, conductivity of electrolytes, specific conductance and equivalent conductance.

Last Answer : Electrolyte: A substance which produces ions in solution or in fused state and allows the electric current to pass through it, is known as electrolyte. Conductivity of electrolytes: The power ... equivalent of solute / electrolyte when placed between two sufficiently large electrodes 1 cm apart.

Classify electrochemical cells. Give examples of each.

Description : Classify electrochemical cells. Give examples of each.

Last Answer : Electrochemical cells are classified as: 1) Primary cells. 2) Secondary cells. Examples of primary cells: Dry Cell (Leclanche’s cell). Daniel Cell. Examples of secondary cells: Lead-acid storage cell. Ni-Cd battery.

Define glass. Give its two characteristics.

Description : Define glass. Give its two characteristics.

Last Answer : Glass is amorphous material which is a mixture of silicates, phosphates, borates and other material with 50-80-% silica . Characteristics: 1) Glass is most widely used as an ... high electric constant. 5) Pyrex glass is most chemically stable and having excellent electrical properties.

Define paint. Give its two properties

Description : Define paint. Give its two properties

Last Answer : Paint: - Paint is a mechanical dispersion mixture of one or more pigment in a vehicle. Properties of paint: 1) Paint imparts opacity and colour to the surface on which it is applied. 2) It ... and weather. 4) Paint imparts luster, gloss and durability to the surface on which it is applied.

Explain cathodic protection. Give one example.

Description : Explain cathodic protection. Give one example.

Last Answer : Cathodic protection: It is the method in which the metal to be protected is forced to behave as a cathode. Examples: 1) To protect buried water or gas pipelines. 2) To protect buried cables. 3) ... water box coolers. 6) To protect water tanks. 7) To protect transmission line towers, etc.  

State the composition of Rose metal.

Description : State the composition of Rose metal.

Last Answer : Composition: Bi = 50%  Pb = 28%  Sn = 22%

Write any four uses of aluminium.

Description : Write any four uses of aluminium.

Last Answer : 1) For preparing utensils, surgical instruments, heating appliances, parts of aeroplanes, containers for chemical industry etc. 2) For making electric wires and cables for transmission lines. 3) ... furnace and for making refractory bricks. 14) For preparation of mirrors for telescope

Write the different types of oxide films formed on the metal surface. Explain the oxide film which is more protective against corrosion.

Description : Write the different types of oxide films formed on the metal surface. Explain the oxide film which is more protective against corrosion.

Last Answer : Types of oxide films 1. Stable porous oxide film 2. Stable non porous oxide film 3. Unstable oxide film 4. Volatile oxide film i) Stable nonporous oxide film ii) Unstable oxide films are protective ... . Example: - Such type of oxide film is formed in the metals like Ag, Au, and Pt.

Write the properties and applications of epoxy resin.

Description : Write the properties and applications of epoxy resin.

Last Answer : Properties: i) They have good chemical resistance. ii) They have low shrinkage during curing. iii) They possess good electrical resistance. iv) These compounds can be used in solid and ... to their electrical resistance they are widely used in making insulators, bushings etc. for high voltage.