How much power does a Chevy Volt require from electricity?

How much power does a Chevy Volt require from electricity?
by

1 Answer

Answer :

It costs about $0.16 per kilowatt of energy you use in your home. To fully charge the Chevrolet Volt is takes 16 kilowatts. So to charge a Chevrolet Volt it would cost 16 KWH X 0.16= $2.64. With only 8 KWH of charge you can travel up to 40 miles without ever tapping into your gas. Once you start using your gas, which will simultaneously start your generator, the Chevrolet will automatically charge itself. All of the cars energy levels are very easy to keep track of too using the power grid in the car or by accessing it over your cell phone with a new app by OnStar. This car is extremely efficient and is a revolutionary step in the hybrid industry. Kudos to Chevrolet for this one.
by

Related questions

How much does it cost to fix my disc brakes on my Chevy Volt?

Description : How much does it cost to fix my disc brakes on my Chevy Volt?

Last Answer : Spongy brakes are usually a sign that the brakes need to be bled. This is an easy procedure that you can do yourself relatively cheaply or you can take it to a mechanic and it can be done for about $50. If the brakes need to be replaced you are looking at $75-$100 dollars per pair.

Anyone own a Chevy Volt?

Description : Anyone own a Chevy Volt?

Last Answer : It is just as likely for me to get a Chevrolet as it is for me to get an Apple product.

Why does the Chevy Volt only travel 40 miles on a full charge, while as early as 1999, GM had the EV-1, which could travel up to 140 miles between charges?

Description : Why does the Chevy Volt only travel 40 miles on a full charge, while as early as 1999, GM had the EV-1, which could travel up to 140 miles between charges?

Last Answer : Possibly, but I think it depends on how you look at it. The technology exists to have an electric vehicle that will go for 140 Miles or more on a single charge, but would it be ... miles and that the gasoline engine can run at a constant RPM allowing for much more efficient fuel consumption

Can you buy a refrigerator that uses 220 volt electricity?

Description : Can you buy a refrigerator that uses 220 volt electricity?

Last Answer : General Electric makes and sells refrigerators that use 220 volt electricity. They are manufactured for use overseas, but are sold in the US as well.

What are some ingenious devices that do not require electricity or chemistry?

Description : What are some ingenious devices that do not require electricity or chemistry?

Last Answer : Handcuffs, although a little sexual chemistry does help.

What kind of warranty does Chevy offer on new car power trains?

Description : What kind of warranty does Chevy offer on new car power trains?

Last Answer : All new Chevy vehicles come with a 5yr/100k Mile Powertrain Ltd Warranty. You can read details on the Chevy warranty program at www.Chevrolet.com/Warranty.

Which of the following statements is true if a 100 watt lamp and a 75 watt lamp are connected in parallel across a 100 volt power supply? A. The 75 watt lamp will draw as much current as the 100 watt lamp. B. The 100 watt lamp will have a greater resistance. C. Current flow will be the same across each lamp. D. The 75 watt lamp will have a higher resistance.

Description : Which of the following statements is true if a 100 watt lamp and a 75 watt lamp are connected in parallel across a 100 volt power supply? A. The 75 watt lamp will draw as much current as the 100 ... Current flow will be the same across each lamp. D. The 75 watt lamp will have a higher resistance.

Last Answer : Answer: D

An electric clothes dryer is connected to a 100-volt source. How much current does it use if it requires 2,000 watts of electric power?

Description : An electric clothes dryer is connected to a 100-volt source. How much current does it use if it requires 2,000 watts of electric power?

Last Answer : 20 Amphere

If voltage across a bulb rated 220 volt-100 watt drops by `2.5 %` of its value, the percentage of the rated value by which the power would decrease is

Description : If voltage across a bulb rated 220 volt-100 watt drops by `2.5 %` of its value, the percentage of the rated value by which the power would decrease is

Last Answer : If voltage across a bulb rated 220 volt-100 watt drops by `2.5 %` of its value, the percentage of the rated value ... 20%` B. `2.5%` C. `5%` D. `10%`

Is the Ridgid R849 18-Volt Cordless Flashlight compatible with other Ridgid power tool chargers?

Description : Is the Ridgid R849 18-Volt Cordless Flashlight compatible with other Ridgid power tool chargers?

Last Answer : Unfortunately, each Rigid charger is only compatible with the product it was sold alongside. You'll have to buy another charger.

As shown in the illustration, the function of the switch labeled 'PFSW' is to determine the ______________. EL-0003 A. bus frequency B. reactive volt amperes of the bus C. frequency of either generator D. power factor of either generator

Description : As shown in the illustration, the function of the switch labeled 'PFSW' is to determine the ______________. EL-0003 A. bus frequency B. reactive volt amperes of the bus C. frequency of either generator D. power factor of either generator

Last Answer : Answer: D

A common-emitter circuit has an input voltage of 0.1 volt, an output voltage of 2.0 volts, an input current of 0.5 milliamps, and an output current of 10 milliamps. What is the power gain? A. 20 B. 40 C. 400 D. 4000

Description : A common-emitter circuit has an input voltage of 0.1 volt, an output voltage of 2.0 volts, an input current of 0.5 milliamps, and an output current of 10 milliamps. What is the power gain? A. 20 B. 40 C. 400 D. 4000

Last Answer : Answer: C

Two 100 watt light bulbs are connected in parallel across a 100 volt power supply. The total power developed in the circuit is _______________. A. 200 watts B. 100 watts C. 50 watts D. equal to the product of the amperes times the voltage in each branch

Description : Two 100 watt light bulbs are connected in parallel across a 100 volt power supply. The total power developed in the circuit is _______________. A. 200 watts B. 100 watts C. 50 watts D. equal to the product of the amperes times the voltage in each branch

Last Answer : Answer: A

What current is required to light two 75 watt lamps and one 40 watt lamp when connected in series to a 120 volt power source? A. 0.161 amperes B. 0.631 amperes C. 1.583 amperes D. 6.199 amperes

Description : What current is required to light two 75 watt lamps and one 40 watt lamp when connected in series to a 120 volt power source? A. 0.161 amperes B. 0.631 amperes C. 1.583 amperes D. 6.199 amperes

Last Answer : Answer: C

In the illustration, the component VR2 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal 1 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 2 at 9.1 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR2 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal ... 2 at 9.1 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: C

In the illustration, the component VR1 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal 9 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR1 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to ... terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: A

In the illustration, the component VR1 on the A1A1 PCB is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply B. a variable resistor diode to control the output to terminal 9 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR1 on the A1A1 PCB is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply B. a variable resistor diode to control the output to terminal 9 that controls ... terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: C

In the illustrated circuit 'A', what power is consumed by a 3 ohm resistor with a 12 volt source? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Description : In the illustrated circuit 'A', what power is consumed by a 3 ohm resistor with a 12 volt source? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Last Answer : Answer: B

The 24 volt DC bus on the emergency switchboard is used to supply power to the _____________. A. general alarm system B. gyrocompass power failure alarm system C. smoke detection system D. all of the above

Description : The 24 volt DC bus on the emergency switchboard is used to supply power to the _____________. A. general alarm system B. gyrocompass power failure alarm system C. smoke detection system D. all of the above

Last Answer : Answer: D

Which of the listed sections of an emergency switchboard is used to supply power for alarm signals under emergency conditions? A. The generator and bus transfer section B. The 450 volt, 60 cycle, 3 phase bus C. The 120 volt, 3 phase, 60 cycle bus D. The 24 volt DC bus

Description : Which of the listed sections of an emergency switchboard is used to supply power for alarm signals under emergency conditions? A. The generator and bus transfer section B. The 450 volt, 60 cycle, 3 phase bus C. The 120 volt, 3 phase, 60 cycle bus D. The 24 volt DC bus

Last Answer : Answer: D

Power necessary to operate the horn relay shown in the illustration ____________. EL-0093 A. comes from each station's magneto B. is supplied from a 115 volt source C. is conducted through the relay's contacts D. also lights lamps 'R' and 'T'

Description : Power necessary to operate the horn relay shown in the illustration ____________. EL-0093 A. comes from each station's magneto B. is supplied from a 115 volt source C. is conducted through the relay's contacts D. also lights lamps 'R' and 'T'

Last Answer : Answer: A

The +5 volt regulated power supply shown in the illustration is fed directly from the _______________. EL-0094 A. 115 volt AC bus B. Annunciator Module C. +24 volt supply D. Annunciator Controller

Description : The +5 volt regulated power supply shown in the illustration is fed directly from the _______________. EL-0094 A. 115 volt AC bus B. Annunciator Module C. +24 volt supply D. Annunciator Controller

Last Answer : Answer: C

Power necessary to operate the horn shown in the illustration _____________. EL-0093 A. comes from each station's magneto B. is supplied from a 115 volt source C. is conducted through a relay coil D. also lights lamps 'R' and 'T'

Description : Power necessary to operate the horn shown in the illustration _____________. EL-0093 A. comes from each station's magneto B. is supplied from a 115 volt source C. is conducted through a relay coil D. also lights lamps 'R' and 'T'

Last Answer : Answer: B

The electrical energy necessary to power a sound-powered telephone's small vibrating bell is obtained from _________. A. the emergency batteries for the general alarm B. each station's hand-cranked generator C. the emergency switchboard D. normal 115 volt DC supplies

Description : The electrical energy necessary to power a sound-powered telephone's small vibrating bell is obtained from _________. A. the emergency batteries for the general alarm B. each station's hand-cranked generator C. the emergency switchboard D. normal 115 volt DC supplies

Last Answer : Answer: B

Ships’ generators produce 450-volt, three-phase, ac power; however, most equipment uses 117-volt, single-phase power What transformers and connections are used to convert 450- volt, threephase power to 117-volt, single-phase power?

Description : Ships’ generators produce 450-volt, three-phase, ac power; however, most equipment uses 117-volt, single-phase power What transformers and connections are used to convert 450- volt, threephase power to 117-volt, single-phase power?

Last Answer : A method of generating oscillations, a method of turning the oscillations on and off (keying), and an antenna to radiate the energy.

[23] Transformers are rated in KVA instead of KW because A. load power factor is often not known B. KVA is fixed whereas KW depends on load power factor C. Total transformer loss depends on volt ampere D. It has become customary

Description : [23] Transformers are rated in KVA instead of KW because A. load power factor is often not known B. KVA is fixed whereas KW depends on load power factor C. Total transformer loss depends on volt ampere D. It has become customary

Last Answer : C. Total transformer loss depends on volt ampere

How much does it cost to replace the parking break on a Chevy s-10?

Description : How much does it cost to replace the parking break on a Chevy s-10?

Last Answer : Feel Free to Answer

How much can I get for my running 1995 2wd 2500 Chevy Silverado With a bad cam at a junk yard?

Description : How much can I get for my running 1995 2wd 2500 Chevy Silverado With a bad cam at a junk yard?

Last Answer : Prices for scrap metal change almost daily. Call your localwrecking yard for current price. Drive it in for the bestprice.

How much does my 2006 Chevy impala weigh?

Description : How much does my 2006 Chevy impala weigh?

Last Answer : What is the answer ?

How much can I get for my running 1995 2wd 2500 Chevy Silverado With a bad cam at a junk yard?

Description : How much can I get for my running 1995 2wd 2500 Chevy Silverado With a bad cam at a junk yard?

Last Answer : Prices for scrap metal change almost daily. Call your localwrecking yard for current price. Drive it in for the bestprice.

How much is the average cost of auto insurance on a Chevy HHR in the 89511 zip code?

Description : How much is the average cost of auto insurance on a Chevy HHR in the 89511 zip code?

Last Answer : The average price for auto insurance on a Chevy HHR in zipcode 89511 is $ 249 dollars a month. Price wil reach the $300 dollar mark if you have any other drivers in your household.

How much trunk space does the Chevy Avalanche have?

Description : How much trunk space does the Chevy Avalanche have?

Last Answer : The Chevy Avalanche is not a normal SUV, but is rather an SUV pickup. Thusly, it does not have any closed trunk space. The bed size is 5 feet 3 inches.

how much would a complete brake job cost for a chevy astro van ?

Description : how much would a complete brake job cost for a chevy astro van ?

Last Answer : Front and rear discs at the min would be about 150.00, rotor work, caliper work, master cyl., vac. boost or hydra boost all cost xtra between 100.00 to 900.00 for complete overhaul entire system. If your van is locking up at little brake pressure its hydra boost. greg

how much would it cost to replace a transmission on a 1995 chevy blazer 4.0L V6 4x4?

Description : how much would it cost to replace a transmission on a 1995 chevy blazer 4.0L V6 4x4?

Last Answer : There are a few variables that can determine the cost of replacing a transmission in your Blazer. If you can find a used transmission at a junk yard, or buy a "totaled" Blazer for scrap parts ... , it can cost you upwards of $1500-$2000 for a new one installed by a certified transmission specialist.

How much would it cost to repair a Transmission for a 1994 Chevy Suburban 1500 4x2 Automatic?

Description : How much would it cost to repair a Transmission for a 1994 Chevy Suburban 1500 4x2 Automatic?

Last Answer : The approximate cost to repair your automatic transmission would be $1,200 dollars.

How much does it cost for a Chevy Cobalt?

Description : How much does it cost for a Chevy Cobalt?

Last Answer : The Price of Chevy Cobalt is between the price of 10,000-17,000 dollars depending on what year car you are looking for and also If you want to buy it used or brand new. It's a good car, because Cobalt gets good gas mileage and is comfortable car to drive.

Can you explain my Chevy truck's ventilation controls?

Description : Can you explain my Chevy truck's ventilation controls?

Last Answer : Sounds like the inlet may be clogged with leaves or other debris. The air vent for the A/C and heater is just in front of the windshield. The cooler air you get when recirculation is off is ... fresh air (possibly partially heated by engine heat or sun on hood) when recirculation button is off. .

How do I hook up my iPod to our 2003 Chevy Suburban?

Description : How do I hook up my iPod to our 2003 Chevy Suburban?

Last Answer : The cable probably isnt supported by the iPod, and have you tried all the RCA ports? If all faisl jsut go and get a $15 ipod charger/fm transmiter from canadian tire or something.

Having two separate gauge issues with my 2000 Chevy Lumina. Are they related?

Description : Having two separate gauge issues with my 2000 Chevy Lumina. Are they related?

Last Answer : answer:First your gas guage. Chevrolet has always used a floating gas guage , They never were and never will be accurate. They float on top of the gasoline in your fuel tank. Many factors can ... you do not know how to replace the thermostat, then take your car to a reliable neighborhood mechanic.

Ford Ranger vs. Chevy S-10 vs. Toyota Tacoma vs. Dodge Dakota?

Description : Ford Ranger vs. Chevy S-10 vs. Toyota Tacoma vs. Dodge Dakota?

Last Answer : I’ve got a Dodge Dakota for sale :)

Where could I buy a replacement license plate light cover for my 2001 Chevy Tahoe?

Description : Where could I buy a replacement license plate light cover for my 2001 Chevy Tahoe?

Last Answer : Probably @ Checkers, for one..

What would be the best and most reliable computer programmer for a 99 V6 Chevy Camaro?

Description : What would be the best and most reliable computer programmer for a 99 V6 Chevy Camaro?

Last Answer : The closest thing I can think of that will do what you want is an AEM engine management system. It connects between your stock ECM and your wiring harness to allow you to override sensors and controls. ... would help with both power and economy, and won't cost more than a couple of hundred bucks.

how do i reset a replaced ignition on a 2000 chevy impala

Description : how do i reset a replaced ignition on a 2000 chevy impala

Last Answer : Need Answer

how to clean crank shaft of a 2004 chevy malibu

Description : how to clean crank shaft of a 2004 chevy malibu

Last Answer : Need Answer

How do you remove the service air bag alert on a chevy silverado 2003

Description : How do you remove the service air bag alert on a chevy silverado 2003

Last Answer : Need Answer

How do I change the oil and filter in a 2013 Chevy Sonic?

Description : How do I change the oil and filter in a 2013 Chevy Sonic?

Last Answer : Need Answer

how do i reset the change engine oil light on a 2004 chevy impala

Description : how do i reset the change engine oil light on a 2004 chevy impala

Last Answer : Turn the ignition to "ON", with the engine off. Fully press and release the accelerator pedal three times within five seconds. If the "CHANGE ENGINE OIL" message flashes, the system is reset.

what is the wheelbase of 1990's chevy

Description : what is the wheelbase of 1990's chevy

Last Answer : Need Answer

how to remove a thermostat on a 1997 chevy luminia

Description : how to remove a thermostat on a 1997 chevy luminia

Last Answer : Need Answer

how to change front spindles on a Chevy Astro

Description : how to change front spindles on a Chevy Astro

Last Answer : Need Answer