how do i reset a replaced ignition on a 2000 chevy impala

how do i reset a replaced ignition on a 2000 chevy impala
by

1 Answer

Answer :

Need Answer
by

Related questions

how do i reset the change engine oil light on a 2004 chevy impala

Description : how do i reset the change engine oil light on a 2004 chevy impala

Last Answer : Turn the ignition to "ON", with the engine off. Fully press and release the accelerator pedal three times within five seconds. If the "CHANGE ENGINE OIL" message flashes, the system is reset.

How do you reset lights and signals etc. on 2005 Honda odyssey after ignition lock has been removed and replaced?

Description : How do you reset lights and signals etc. on 2005 Honda odyssey after ignition lock has been removed and replaced?

Last Answer : What is the answer ?

how to replace a 72 chevy impala convertable top switch

Description : how to replace a 72 chevy impala convertable top switch

Last Answer : Need Answer

How much does my 2006 Chevy impala weigh?

Description : How much does my 2006 Chevy impala weigh?

Last Answer : What is the answer ?

What size engine is standard for the Chevy Impala?

Description : What size engine is standard for the Chevy Impala?

Last Answer : All three versions of the 2010 Impala come standard with a 3.5 liter V6 engine. For an overview of all the available options you can go to http://autos.aol.com/cars-Chevrolet-Impala-2010/options-trimless/.

How do you reset the engine check light for a 2008 Chevy Cobalt?

Description : How do you reset the engine check light for a 2008 Chevy Cobalt?

Last Answer : Fix the cause of the light coming on and the light will resetitself within a few drive cycles.

How do you reset tire pressure on 2008 Chevy Colorado truck?

Description : How do you reset tire pressure on 2008 Chevy Colorado truck?

Last Answer : Put the required air in the tire and drive it, it will resetitself unless there is something wrong with the TPMS (Tire PressureMoniter System).

How to Reset abs light on a 2014 Chevy Spark?

Description : How to Reset abs light on a 2014 Chevy Spark?

Last Answer : The ABS light is on because the ABS module detects a problemwith the ABS system. Until the problem is fixed correctly the lightwill remain on. Once the problem is fixed the ABS module will ... auto parts store can scan for codes todetermine what the problem is then you can make repairsaccordingly.

How do I reset the check engine light on my chevy cavalier?

Description : How do I reset the check engine light on my chevy cavalier?

Last Answer : 1. To reset the check engine light on your Chevy Cavalier, this is what you have to do. First, open the hood to the car, then turn the retaining nut on the battery’s negative cable clamps ... ignition on and the check engine light will reset itself by blinking a few times and then shutting off.

A circuit breaker differs from a fuse in that a circuit breaker _____________. A. melts and must be replaced B. is enclosed in a tube of insulating material with metal ferrules at each end C. gives no visual indication of having opened the circuit D. trips to break the circuit and may be reset

Description : A circuit breaker differs from a fuse in that a circuit breaker _____________. A. melts and must be replaced B. is enclosed in a tube of insulating material with metal ferrules at each end C. gives no visual indication of having opened the circuit D. trips to break the circuit and may be reset

Last Answer : Answer: D

Having two separate gauge issues with my 2000 Chevy Lumina. Are they related?

Description : Having two separate gauge issues with my 2000 Chevy Lumina. Are they related?

Last Answer : answer:First your gas guage. Chevrolet has always used a floating gas guage , They never were and never will be accurate. They float on top of the gasoline in your fuel tank. Many factors can ... you do not know how to replace the thermostat, then take your car to a reliable neighborhood mechanic.

If you could hit a reset button back to year 2000 would you and why?

Description : If you could hit a reset button back to year 2000 would you and why?

Last Answer : Who wouldn’t want to prevent 9/11?

How do i reset engine warning light on 2000 Jeep Wrangler?

Description : How do i reset engine warning light on 2000 Jeep Wrangler?

Last Answer : Need answer

How often does an impala have babies?

Description : How often does an impala have babies?

Last Answer : Need answer

When i turn on brights on my 05 impala low beam goes out?

Description : When i turn on brights on my 05 impala low beam goes out?

Last Answer : When i turn on brights on my 05 impala low bean goes out

What year was the Impala SS first released?

Description : What year was the Impala SS first released?

Last Answer : The Impala SS edition was first released by Chevrolet in 1961 and was in production until 1969. The SS (Super Sport) edition of the impala was reintroduced briefly in the mid '90's and again in 2004.

How much is a 2015 impala limited worth?

Description : How much is a 2015 impala limited worth?

Last Answer : 31000

Two springs have spring stiffness of 1500 N/m and 2000 N/m respectively. If they are connected in series, what is the spring stiffness if they are replaced by an equivalent system.3500 N/m A. 3500 N/m B. 1166 N/mC. 857.63 N/m D. None of the above

Description : Two springs have spring stiffness of 1500 N/m and 2000 N/m respectively. If they are connected in series, what is the spring stiffness if they are replaced by an equivalent system.3500 N/m A. 3500 N/m B. 1166 N/mC. 857.63 N/m D. None of the above

Last Answer : C. 857.63 N/m

Two springs have spring stiffness of 1500 N/m and 2000 N/m respectively. If they are connected in series, what is the spring stiffness if they are replaced by an equivalent system.3500 N/m A) 3500 N/m B) 1166 N/m C) 857.63 N/m D) None of the above

Description : Two springs have spring stiffness of 1500 N/m and 2000 N/m respectively. If they are connected in series, what is the spring stiffness if they are replaced by an equivalent system.3500 N/m A) 3500 N/m B) 1166 N/m C) 857.63 N/m D) None of the above

Last Answer : C) 857.63 N/m

Two springs have spring stiffness of 1500 N/m and 2000 N/m respectively. If they are connected in series, what is the spring stiffness if they are replaced by an equivalent system.3500 N/m a. 3500 N/m b. 1166 N/m c. 857.63 N/m d. None of the above

Description : Two springs have spring stiffness of 1500 N/m and 2000 N/m respectively. If they are connected in series, what is the spring stiffness if they are replaced by an equivalent system.3500 N/m a. 3500 N/m b. 1166 N/m c. 857.63 N/m d. None of the above

Last Answer : c. 857.63

Does your push button ignition car beep when you walk away with the key when it's on?

Description : Does your push button ignition car beep when you walk away with the key when it's on?

Last Answer : No, only shows “No key detected” on dash. Have two carbon monoxide detectors in house; one connected to whole system in front hall (AC wired with battery backup) second is stand-alone with seven year battery next to door from garage)

Is there a valid reason, in terms of technology or wiring, for it taking, like a hundred years, for them to start manufacturing cars where the default is that your headlights turn off when you turn off your ignition?

Description : Is there a valid reason, in terms of technology or wiring, for it taking, like a hundred years, for them to start manufacturing cars where the default is that your headlights turn off when you turn off your ignition?

Last Answer : answer:Volvo and Saab have had it for years. When I had my ‘82 Volvo, I left my lights on all the time, because they’d go off when i turned off the car. I think it’s not on American cars because of a lack of imagination.

What could happen if you just turn off the ignition while the car is in Drive with your foot on the brake?

Description : What could happen if you just turn off the ignition while the car is in Drive with your foot on the brake?

Last Answer : A few things happen: 1)If she had a car built after about 1985 she has a steering column lock that would prevent her from turning the wheel. 2)The power steering pump stopped working and it ... starters. Also many have electric power steering and power brake pumps so there is no loss of control.

Why am i only getting spark from the coil when i release the ignition?

Description : Why am i only getting spark from the coil when i release the ignition?

Last Answer : Malow, I first suspect the switch itself. I'm guessing that when you rotate the switch it loses contact inside it. Those switches are ususally pretty simple and very cheap at the parts store. They make an ... that looks similar to yours and try it. Wish I was there I would be happy to help!!!

Have you tried LogMeIn Ignition?

Description : Have you tried LogMeIn Ignition?

Last Answer : I didn't try it on the iPhone app, but I have accessed my computer through logmein on my PSP. The screen was very small and tough to see, but it actually worked better than I expected. Some Apple ... you can try it out. They usually have a business display with a lot of palm-type applications.

Ignition key lock?

Description : Ignition key lock?

Last Answer : I don’t know, uber! My friend has an ‘89 corolla that has the opposite ‘feature’. well, we haven’t decided if it’s a feature or a defect, but you can pull the key straight out of the ignition without turning, and the car will stay on. it comes in pretty handy. good question!

What is the opposite of ignition ?

Description : What is the opposite of ignition ?

Last Answer : Extinguish the opposite of ignition

If there is a problem with the ignition, should it be taken to a workshop for service or electricity?

Description : If the ignition or transformer in the car is bad, who should it be taken to?

Last Answer : The mechanic replaces one again, the electrical might be able to repair the old one. If I need cheaper equipment, I'd take it to electricity for you.

Pepo and the ignition of the grill

Description : If I light coal with PEPA, won't grilled meat be poisonous?

Last Answer : It's best to split the chips and then heat the coals.

IGNITION GAP FOR CRAFTSMAN RIDING MOWER

Description : IGNITION GAP FOR CRAFTSMAN RIDING MOWER

Last Answer : Need Answer

is there a chip in the ignition key of a 2011 Nissan versa

Description : is there a chip in the ignition key of a 2011 Nissan versa

Last Answer : Need Answer

how do I disconnect the wires from a 1999 dodge ram 2500 clutch safety ignition switch?

Description : how do I disconnect the wires from a 1999 dodge ram 2500 clutch safety ignition switch?

Last Answer : Need Answer

How do you remove ignition lock cylinder, on a 2006 Dodge Sprinter

Description : How do you remove ignition lock cylinder, on a 2006 Dodge Sprinter

Last Answer : Need Answer

What type of oil is in old ignition coils?

Description : What type of oil is in old ignition coils?

Last Answer : They would contain transformer oil if they have an oilfilling.Old transformer oil (made before 1979) included PCBs as a fireretardent. PCBs have been found to cause many health problemsincluding cancers and are now banned from transformer oils.

What do The ignition points set at on a 1.1 L ford industrial motor?

Description : What do The ignition points set at on a 1.1 L ford industrial motor?

Last Answer : Need answer

How do you replace ignition tumblers on 1951 Ford car?

Description : How do you replace ignition tumblers on 1951 Ford car?

Last Answer : Need answer

What type of oil is in old ignition coils?

Description : What type of oil is in old ignition coils?

Last Answer : They would contain transformer oil if they have an oilfilling.Old transformer oil (made before 1979) included PCBs as a fireretardent. PCBs have been found to cause many health problemsincluding cancers and are now banned from transformer oils.

What does Perma-Flame Instant Re-Ignition mean on the Dacor SGM304S 30" Preference All-Gas 4 Burner Cooktop ?

Description : What does Perma-Flame Instant Re-Ignition mean on the Dacor SGM304S 30" Preference All-Gas 4 Burner Cooktop ?

Last Answer : If the piolet light blows out it will reignite instantly so you do not need matches.

Automatic Honeywell Gas Furnace Ignition Control?

Description : Automatic Honeywell Gas Furnace Ignition Control?

Last Answer : Some intermittent pilot valves are controlled by an automatic ignition control module. A Honeywell gas furnace would probably have the S8610U ignition control module controlling gas release. It opens ... effective in controlling hot water boilers, steam boilers or fan limited Honeywell gas furnaces.

What causes ignition to occur in a diesel engine?

Description : What causes ignition to occur in a diesel engine?

Last Answer : When the piston compresses the fuel-air mixture, the spark ignites it, causing combustion

The knock in diesel engine occurs due to A. instantaneous and rapid burning of the first part of the charge B. instantaneous auto ignition of the last part of the charge C. delayed burning of the last part of the charge D. reduction of delay period

Description : The knock in diesel engine occurs due to A. instantaneous and rapid burning of the first part of the charge B. instantaneous auto ignition of the last part of the charge C. delayed burning of the last part of the charge D. reduction of delay period

Last Answer : ANSWER : A

Most high speed compression ignition engine operate on A. dual cycle B. otto cycle C. diesel cycle D.Carnot cycle

Description : Most high speed compression ignition engine operate on A. dual cycle B. otto cycle C. diesel cycle D.Carnot cycle

Last Answer : ANSWER : A

In a battery ignition system, the intensity of spark is A. minimum at low engine speed B. minimum at low engine speed and increases with engine speed C. maximum al low engine speed and decreases with engine speed D. maximum at low engine speed

Description : In a battery ignition system, the intensity of spark is A. minimum at low engine speed B. minimum at low engine speed and increases with engine speed C. maximum al low engine speed and decreases with engine speed D. maximum at low engine speed

Last Answer : ANSWER : C

Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Description : Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Last Answer : ANSWER : C

The accumulation of carbon in a cylinder results in increase of A. clearance volume B. volumetric efficiency C. ignition time D. effective compression ratio

Description : The accumulation of carbon in a cylinder results in increase of A. clearance volume B. volumetric efficiency C. ignition time D. effective compression ratio

Last Answer : ANSWER : D

In compression ignition (CI) engine, the compression ratio is a. Cylinder volume / Clearance volume b. Swept Volume / Cylinder Volume c. Clearance volume / Cylinder volume d. Cylinder volume / Swept volume (Ans:a)

Description : In compression ignition (CI) engine, the compression ratio is a. Cylinder volume / Clearance volume b. Swept Volume / Cylinder Volume c. Clearance volume / Cylinder volume d. Cylinder volume / Swept volume (Ans:a)

Last Answer : In two stroke engine there is one power stroke in _____ of crankshaft rotation. a. 90° b. 180° c. 270° d. 360° (Ans:d)

The compression ratio in a Spark Ignition (SI) engine is generally in between a. 7 to 10 b. 10 to 14 c. 14 to 18 d. 18 to 22 (Ans:a)

Description : The compression ratio in a Spark Ignition (SI) engine is generally in between a. 7 to 10 b. 10 to 14 c. 14 to 18 d. 18 to 22 (Ans:a)

Last Answer : Which of the following is not true for two stroke engine as compared to four stroke engine? a. Less cooling is required b. Greater lubrication is required c. More uniform torque on crankshaft d. Complete exhaust of products of combustion (Ans:a)

In spark ignition engines, the knocking tendency can be decreased by a) decreasing compression ratio b) controlling intake throttle c) controlling ignition timing d) adding dopes like tetraethyl lead and ethylene dibromide

Description : In spark ignition engines, the knocking tendency can be decreased by a) decreasing compression ratio b) controlling intake throttle c) controlling ignition timing d) adding dopes like tetraethyl lead and ethylene dibromide

Last Answer : Answer: d Explanation: None.

Alcohols alone cannot be used in CI engines as a) their self ignition temperature is high b) latent heat of vaporization is high c) all of the mentioned d) none of the mentioned

Description : Alcohols alone cannot be used in CI engines as a) their self ignition temperature is high b) latent heat of vaporization is high c) all of the mentioned d) none of the mentioned

Last Answer : Answer: c Explanation: None.

The _____________ sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The _____________ sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: d Explanation: The knock sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded while the camshaft position sensor, senses ... the engine intake manifold so that the mixture strength can be adjusted with changes in engine load.