How much does it cost to have auto tires rotated?

How much does it cost to have auto tires rotated?
by

1 Answer

Answer :

Auto tire rotation often comes at the grand price of free. If you return to the location where the tires were purchased they will, quite often rotate them for free.
by

Related questions

Where can I get my tires balanced, rotated and aligned?

Description : Where can I get my tires balanced, rotated and aligned?

Last Answer : If you are going to get your tires rotated you should also align and balance them. The reason for this is to make sure nothing is out of place. You can get this done at places like AutoZone.

Are tires from Costco going to be much cheaper than an auto dealer?

Description : Are tires from Costco going to be much cheaper than an auto dealer?

Last Answer : answer:Don’t know your specifics. Hope this link helps. It was cheaper for us in the past, but that was in Hawaii. Things tend to be more expensive there anyway and the tires were for a sports car.

Has anyone had a bad experience with auto tires made in China?

Description : Has anyone had a bad experience with auto tires made in China?

Last Answer : answer:It would seem your new Michelins may have also been made in China. So I don't think you can judge the quality of a tire strictly on where it was made. If you're unhappy with them, that makes ... I'd go with the ones on the car until they wore and then replace them with your brand of choice.

How many miles before I should switch auto tires?

Description : How many miles before I should switch auto tires?

Last Answer : Some say to change your auto tires every 5000 miles. Other people just check the tread on their tires and when the tread looks worn, they switch their tires.

Diligently Purchase Auto Tires?

Description : Diligently Purchase Auto Tires?

Last Answer : Tires are a key part of every vehicle yet they can be one of the most overlooked parts when car owners are maintaining their cars.When the overall safety of a vehicle depends heavily on ... aspect of vehicle safety, drivers cannot afford to be anything but diligent when making purchase decisions.

What are the best kinds of auto tires?

Description : What are the best kinds of auto tires?

Last Answer : There are many factors involved in choosing the best tires for your car. It would be a good idea to discuss this topic with a dealer that specializes in your make and model of car. Once you find out what kind of wheels you need, you can buy them someplace cheaper, such as Sam's club.

When microwave energy is passed through a piece of ferrite in a magnetic field, another effect occurs. If the frequency of the microwave energy is much greater than the electron wobble frequency, the plane of polarization of the wavefront is rotated. This is known as

Description : When microwave energy is passed through a piece of ferrite in a magnetic field, another effect occurs. If the frequency of the microwave energy is much greater than the electron wobble frequency, the plane of polarization of the wavefront is rotated. This is known as

Last Answer : Faraday Rotation Effect

An ellipse can also be rotated about its center coordinates by rotating a.End points b.Major and minor axes c.Only a d.None

Description : An ellipse can also be rotated about its center coordinates by rotating a.End points b.Major and minor axes c.Only a d.None

Last Answer : b.Major and minor axes

A line AB with end point A (2,3) & B (7,8) is to be rotated about origin by 300 inclockwise direction. Determine the coordinates of end points S of rotated line. a.(3.232, 2.598) b.(5.232, 3.598) c.(3.232, 1.298) d.(3.232, 1.598)

Description : A line AB with end point A (2,3) & B (7,8) is to be rotated about origin by 300 inclockwise direction. Determine the coordinates of end points S of rotated line. a.(3.232, 2.598) b.(5.232, 3.598) c.(3.232, 1.298) d.(3.232, 1.598)

Last Answer : d.(3.232, 1.598)

The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Description : The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Last Answer : a. 628

A rectangular coil of copper wires is rotated in a magnetic field. The direction of the induced current changes once in each -Physics-10

Description : A rectangular coil of copper wires is rotated in a magnetic field. The direction of the induced current changes once in each -Physics-10

Last Answer : half revolution When a rectangular coil is rotated in magnetic field, the direction of the induced current changes once in half revolution. As a result, the direction of the current in the coil remains the same. In text 13.7 Page:238

what- A triangle is rotated repeatedly around point P to make a pinwheel.Which angle appears to be the angle of rotation?

Description : what- A triangle is rotated repeatedly around point P to make a pinwheel.Which angle appears to be the angle of rotation?

Last Answer : 40

What is it called as the screw moves away when only one part of the circular scale is rotated ?

Description : What is it called as the screw moves away when only one part of the circular scale is rotated ?

Last Answer : The smallest calculation is when the screw moves when only one part of the circular scale is rotated.

The screen has rotated 90 degrees. How can I restore it?

Description : I must have pressed something, but I don't know what, and I can't reset the screen.

Last Answer : Press CTRL + ALT + UP ARROW to return to the screen.

Rotated image on the monitor

Description : I accidentally squeezed something and my image turned, I have an Aspire E 15 laptop and Windows 10. Please don't know how to get it back to its original state?

Last Answer : Ctrl + Alt + up or down arrow. That should work

how to print on both sides of a tent card & have the name rotated on the other side

Description : how to print on both sides of a tent card & have the name rotated on the other side

Last Answer : Need Answer

Newman projection of Butane is given, C-2 is rotated by `120^(º)` along `C_(2)-C_(3)` bond in anticloclwise direction, the conformation formed is :

Description : Newman projection of Butane is given, C-2 is rotated by `120^(º)` along `C_(2)-C_(3)` bond in anticloclwise direction, the conformation formed is :

Last Answer : Newman projection of Butane is given, C-2 is rotated by `120^(º)` along `C_(2)-C_(3)` ... A. anti B. fully eclipsed C. gauche D. partially eclipsed

Which conformational state of n-butane lies in higher energy state when rotated along `C_(2)-C_(3)` bond?

Description : Which conformational state of n-butane lies in higher energy state when rotated along `C_(2)-C_(3)` bond?

Last Answer : Which conformational state of n-butane lies in higher energy state when rotated along `C_(2)-C_(3)` bond?

What time period on earth would be 10 hours long if earth rotated on its axis every 10 hours?

Description : What time period on earth would be 10 hours long if earth rotated on its axis every 10 hours?

Last Answer : Feel Free to Answer

Basic electrical motor action depends on _______________. A. a conductor rotated within a magnetic field B. a current carrying conductor placed in a magnetic field C. the relative force of the commutator and commutating poles D. the relative force of the armature and interpoles

Description : Basic electrical motor action depends on _______________. A. a conductor rotated within a magnetic field B. a current carrying conductor placed in a magnetic field C. the relative force of the commutator and commutating poles D. the relative force of the armature and interpoles

Last Answer : Answer: B

As an armature revolves within a magnetic field, friction is developed between the rotated magnetized particles as they pass through each magnetization cycle. This results in ____________. A. copper loss B. eddy-current loss C. hysteresis loss D. armature reaction

Description : As an armature revolves within a magnetic field, friction is developed between the rotated magnetized particles as they pass through each magnetization cycle. This results in ____________. A. copper loss B. eddy-current loss C. hysteresis loss D. armature reaction

Last Answer : Answer: C

If the steering stand selector switch is allowed to remain in the 'Non-Followup' mode after testing of the steering gear, the rudder will _____________. EL-0097 A. not respond to commands from the helm B. move in one direction only regardless of the movement of the helm C. not respond to output from the rotary actuator D. stop moving only when the helm is counter-rotated to put the pump at neutral stroke

Description : If the steering stand selector switch is allowed to remain in the 'Non-Followup' mode after testing of the steering gear, the rudder will _____________. EL-0097 A. not respond to commands from the ... actuator D. stop moving only when the helm is counter-rotated to put the pump at neutral stroke

Last Answer : Answer: A

In a roll crusher, both the rolls (A) Have the same diameter (B) Are rotated towards each other (C) Run either at the same or different speeds (D) All (A), (B) and (C

Description : In a roll crusher, both the rolls (A) Have the same diameter (B) Are rotated towards each other (C) Run either at the same or different speeds (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

In nut and bolt fastener, nut is generally held stationary while bolt is rotated. a) True b) False

Description : In nut and bolt fastener, nut is generally held stationary while bolt is rotated. a) True b) False

Last Answer : b) False

The Philippine Code of Ethics requires that lead engagement partners of listed entities be rotated at least once every: a. 2 years b. 3 years c. 5 years d. 7 years

Description : The Philippine Code of Ethics requires that lead engagement partners of listed entities be rotated at least once every: a. 2 years b. 3 years c. 5 years d. 7 years

Last Answer : 5 years

_____codes arespecial linear block codes with one extraproperty. If a codeword is rotated, the result is another codeword. A) Non-linear B) Convolution C) Cyclic D) none of the above

Description : _____codes arespecial linear block codes with one extraproperty. If a codeword is rotated, the result is another codeword. A) Non-linear B) Convolution C) Cyclic D) none of the above

Last Answer : Cyclic

Pick up the correct statement from the following: (A) The theodolite in which telescope can be rotated in vertical plane is called a transmit (B) When the vertical circle is to the left of the telescope during observation, it is called to be in left face (C) When the vertical circle is to the right of the telescope during observation, it is called to be in right face (D) All the above

Description : Pick up the correct statement from the following:  (A) The theodolite in which telescope can be rotated in vertical plane is called a transmit  (B) When the vertical circle is to the left of ... the telescope during observation, it is called to be  in right face  (D) All the above 

Last Answer : (D) All the above 

A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier A reads (A) Azimuth of the forward line (B) Bearing of the forward line (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Description : A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier ... (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Last Answer : (A) Azimuth of the forward line

The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error such that each ray is equally rotated either clockwise or anti clockwise 5. The points obtained by three rays are the correct location. The correct sequence is (A) 1, 3, 2, 4, 5 (B) 1, 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Description : The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error ... 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Last Answer : (A) 1, 3, 2, 4, 5

In a shaft rotated by a couple, the shear force varies (A) From zero at the centre to a maximum at the circumference (B) From minimum at the centre of maximum at the circumference (C) From maximum at the centre to zero at the circumference (D) Equally throughout the section

Description : In a shaft rotated by a couple, the shear force varies (A) From zero at the centre to a maximum at the circumference (B) From minimum at the centre of maximum at the circumference (C) From maximum at the centre to zero at the circumference (D) Equally throughout the section

Last Answer : (A) From zero at the centre to a maximum at the circumference

With fractures of the femoral neck, the leg is a) shortened, adducted, and externally rotated. With fractures of the femoral neck, the leg is shortened, adducted, and externally rotated.

Description : With fractures of the femoral neck, the leg is a) shortened, adducted, and externally rotated. With fractures of the femoral neck, the leg is shortened, adducted, and externally rotated. b) ... rotated. With fractures of the femoral neck, the leg is shortened, adducted, and externally rotated.

Last Answer : a) shortened, adducted, and externally rotated. With fractures of the femoral neck, the leg is shortened, adducted, and externally rotated.

When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow

Description : When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow

Last Answer : Answer: Option C

What is the name given to the angle through which a transmitters rotor is mechanically rotated?

Description : What is the name given to the angle through which a transmitters rotor is mechanically rotated?

Last Answer : Signal.

Which gyro rotor in figure 3-6, view (A) view (B) view (C), will have the greatest rigidity if all are rotated at the same speed?

Description : Which gyro rotor in figure 3-6, view (A) view (B) view (C), will have the greatest rigidity if all are rotated at the same speed?

Last Answer : C.

The parasitic array can be rotated to receive or transmit in different directions. What is the name given to such an antenna?

Description : The parasitic array can be rotated to receive or transmit in different directions. What is the name given to such an antenna?

Last Answer : Rotary array.

What is the frequency of the output voltage of an alternator with four poles that is rotated at 3600 rpm?

Description : What is the frequency of the output voltage of an alternator with four poles that is rotated at 3600 rpm?

Last Answer : 120 Hz.

Consider a triangle A(0, 0), B(1, 1), C(5, 2). The triangle has to be rotated by an angle of 450 about the point P(-1, -1). What shall be the coordinates of the new triangle? (A) A'=(1, √2-1), B'=(-1, 2√2-1), C'=(3√2-1, (9/2)√2-1) (B) A'=(1, √2-1), B'=(2√2-1, -1), C'=(3√2-1, (9/2)√2-1) (C) A'=(-1, √2-1), B'=(-1, 2√2-1), C'=(3√2-1, (9/2)√2-1) (D) A'=(√2-1, -1), B'=(-1, 2√2-1), C'=(3√2-1, (9/2)√2-1)

Description : Consider a triangle A(0, 0), B(1, 1), C(5, 2). The triangle has to be rotated by an angle of 450 about the point P(-1, -1). What shall be the coordinates of the new triangle? (A) A'=(1, √2-1), B'=(-1, 2√2-1), C'=(3√2-1, ... 3√2-1, (9/2)√2-1) (D) A'=(√2-1, -1), B'=(-1, 2√2-1), C'=(3√2-1, (9/2)√2-1)

Last Answer : (C) A'=(-1, √2-1), B'=(-1, 2√2-1), C'=(3√2-1, (9/2)√2-1)

Consider a unit square centred at origin. The coordinates of the square are translated by a factor (1/2, 1) and rotated by an angle of 90o . What shall be the coordinates of the new square ? (A) (-1/2, 0), (-1/2, 1), (-3/2, 1), (-3/2, 0) (B) (-1/2, 0), (1/2, 1), (3/2, 1), (3/2, 0) (C) (-1/2, 0), (1/2, 0), (-3/2, 1), (-3/2, 0) (D) (-1/2, 0), (1/2, 1), (-3/2, 1), (-3/2, 0)

Description : Consider a unit square centred at origin. The coordinates of the square are translated by a factor (1/2, 1) and rotated by an angle of 90o . What shall be the coordinates of the new square ? (A) (-1/2, 0), (-1/2, 1), (-3/2, 1), (-3/2, ... , 1), (-3/2, 0) (D) (-1/2, 0), (1/2, 1), (-3/2, 1), (-3/2, 0)

Last Answer : (A) (-1/2, 0), (-1/2, 1), (-3/2, 1), (-3/2, 0)

A point P(5,1) is rotated by 900 about a pivot point (2,2). What is the coordinate of new transformed point P’ ? (A) (3,5) (B) (5,3) (C) (2,4) (D) (1,5)

Description : A point P(5,1) is rotated by 900 about a pivot point (2,2). What is the coordinate of new transformed point P’ ? (A) (3,5) (B) (5,3) (C) (2,4) (D) (1,5)

Last Answer : (A) (3,5) 

Perspective view of an object is shown below. The object is rotated 90 degrees anticlockwise about z-axis (when viewed from a point on the positive z-axis towards the origin) and then rotated 180 degrees about x-axis (when viewed from a point on the positive x-axis towards the origin). Which one of the following perspective view options will be the result of the rotations?

Description : Perspective view of an object is shown below. The object is rotated 90 degrees anticlockwise about z-axis (when viewed from a point on the positive z-axis towards the origin) and then rotated 180 ... Which one of the following perspective view options will be the result of the rotations? 

Last Answer : A

If a copper disc is rotated rapidly below a freely suspended magnetic...

Description : If a copper disc is rotated rapidly below a freely suspended magnetic needle, the magnetic needle shall start rotating with a velocity

Last Answer : If a copper disc is rotated rapidly below a freely suspended magnetic needle, the magnetic needle shall start rotating with a velocity less than that of disc and in the same direction.

Do you know how much sandals made of tires cost in Kenya or elsewhere?

Description : Do you know how much sandals made of tires cost in Kenya or elsewhere?

Last Answer : I don’t know the answer, but perhaps one of the items on this search list will help you.

How much does it generally cost to replace rims on all four tires?

Description : How much does it generally cost to replace rims on all four tires?

Last Answer : The cost for replacing rims on four tires varies based on the type of car and the type of rims being put on. However, it normally costs about $500-$700 to purchase nice rims and have them put on the car.

Why do SUV tires cost so much more than sedan tires?

Description : Why do SUV tires cost so much more than sedan tires?

Last Answer : Generally the tires used for SUV's are larger or meant for all terrain. Depending on the brand, size, and type of tire, you can expect to pay $100-300 more per tire.

How much do Yokohama tires cost ?

Description : How much do Yokohama tires cost ?

Last Answer : Yokohama tires are expensive! This particualr brand of tires vary from place to place but they start at $100 per tire. For a set of four you are looking at about $400 dollars and thats before tax.

How much do Kelly tires usually cost ?

Description : How much do Kelly tires usually cost ?

Last Answer : Kelly tires can be anywhere from $60 to $200 dollars.

How much does it cost to replace all four car tires?

Description : How much does it cost to replace all four car tires?

Last Answer : It depends on the type of tires you want & the place you are getting them done. They are pretty expensive though. 4 tires on a big truck with normal non expensive tires but just because they are big is $712.

How much do the tractor tires cost?

Description : How much do the tractor tires cost?

Last Answer : Tractor tires, depending on what you are buying, can cost anywhere from $300.00 all the way up to $2,500.00 or even more. You may be able to find better deals if you search, but it's more than likely that to buy good tractor tires you'll have to pay a bit more.

How much does it cost to get auto detailing?

Description : How much does it cost to get auto detailing?

Last Answer : Auto detailing can cost anywhere from $35 on up to over $100. Depending on the size of your car, the degree of detailing you want done and the area you live. It will be cheaper to get your car detailed in Tulsa, OK than it would in New York, NY.

How much is the average cost of auto insurance on a Chevy HHR in the 89511 zip code?

Description : How much is the average cost of auto insurance on a Chevy HHR in the 89511 zip code?

Last Answer : The average price for auto insurance on a Chevy HHR in zipcode 89511 is $ 249 dollars a month. Price wil reach the $300 dollar mark if you have any other drivers in your household.