Which gyro rotor in figure 3-6, view (A) view (B) view (C), will have the greatest rigidity if all are rotated at the same speed?

Which gyro rotor in figure 3-6, view (A) view (B) view (C),  will have the greatest rigidity if all are rotated at the same  speed?
by

1 Answer

Answer :

C.
by

Related questions

What factors determine the rigidity of a gyro?

Description : What factors determine the rigidity of a gyro?

Last Answer : Rotor speed, weight, shape.

What is the name given to the angle through which a transmitters rotor is mechanically rotated?

Description : What is the name given to the angle through which a transmitters rotor is mechanically rotated?

Last Answer : Signal.

In the drawing in figure 3-1, which axis is the gyro spin axis?

Description : In the drawing in figure 3-1, which axis is the gyro spin axis?

Last Answer : X-axis

What gyro characteristic provides the basis of the operation of a rate gyro?

Description : What gyro characteristic provides the basis of the operation of a rate gyro?

Last Answer : Precession.

How many degrees-of-freedom does a rate gyro usually have?

Description : How many degrees-of-freedom does a rate gyro usually have?

Last Answer : One.

What is the purpose of rotating the gimbal assembly in a gyro using a mercury erection system?

Description : What is the purpose of rotating the gimbal assembly in a gyro using a mercury erection system?

Last Answer : Applies torque at the proper point for correct precession.

What is the purpose of an erection system used with a gyro?

Description : What is the purpose of an erection system used with a gyro?

Last Answer : To achieve and maintain the proper operating position for the gyro (usually vertical or horizontal).

What are the three causes of mechanical drift in a gyro?

Description : What are the three causes of mechanical drift in a gyro?

Last Answer : Unbalanced gyro, inertia of gimbals, bearing friction

If a free gyro is placed at the equator at 1200 in a vertical position; in what position should it be at 1800?

Description : If a free gyro is placed at the equator at 1200 in a vertical position; in what position should it be at 1800?

Last Answer : Horizontal.

A universally mounted gyro has how many degrees of freedom?

Description : A universally mounted gyro has how many degrees of freedom?

Last Answer : Two.

What factor determines the direction a gyro will precess in response to a particular force?

Description : What factor determines the direction a gyro will precess in response to a particular force?

Last Answer : Direction of spin.

What type of force acts ONLY through the center of gravity of a gyro, and does NOT cause precession?

Description : What type of force acts ONLY through the center of gravity of a gyro, and does NOT cause precession?

Last Answer : Force of translation.

A universally mounted gyro has how many gimbals?

Description : A universally mounted gyro has how many gimbals?

Last Answer : Two.

In what direction will a gyro precess in response to an outside force?

Description : In what direction will a gyro precess in response to an outside force?

Last Answer : Perpendicular (90º) to the force.

What type(s) of force does a gyro resist?

Description : What type(s) of force does a gyro resist?

Last Answer : Any force that attempts to tilt the spin axis.

What gyro property causes the gyro to remain in a fixed position?

Description : What gyro property causes the gyro to remain in a fixed position?

Last Answer : Rigidity.

The parasitic array can be rotated to receive or transmit in different directions. What is the name given to such an antenna?

Description : The parasitic array can be rotated to receive or transmit in different directions. What is the name given to such an antenna?

Last Answer : Rotary array.

What is the frequency of the output voltage of an alternator with four poles that is rotated at 3600 rpm?

Description : What is the frequency of the output voltage of an alternator with four poles that is rotated at 3600 rpm?

Last Answer : 120 Hz.

Perspective view of an object is shown below. The object is rotated 90 degrees anticlockwise about z-axis (when viewed from a point on the positive z-axis towards the origin) and then rotated 180 degrees about x-axis (when viewed from a point on the positive x-axis towards the origin). Which one of the following perspective view options will be the result of the rotations?

Description : Perspective view of an object is shown below. The object is rotated 90 degrees anticlockwise about z-axis (when viewed from a point on the positive z-axis towards the origin) and then rotated 180 ... Which one of the following perspective view options will be the result of the rotations? 

Last Answer : A

The speed of the rotor is always somewhat less than the speed of the rotating field. What is the difference called?

Description : The speed of the rotor is always somewhat less than the speed of the rotating field. What is the difference called?

Last Answer : Slip.

Using illustrated chart, when will the power factor be least efficient? EL-0006 A. When the motor is operating at full load. B. When the percentage of slip is greatest. C. When there is no load on the motor. D. the power factor is the same from no-load to locked rotor.

Description : Using illustrated chart, when will the power factor be least efficient? EL-0006 A. When the motor is operating at full load. B. When the percentage of slip is greatest. C. When there is no load on the motor. D. the power factor is the same from no-load to locked rotor.

Last Answer : Answer: C

If an ac voltmeter is connected between the S2 and S3 windings on a TX, at what two rotor positions should the voltmeter read maximum voltage?

Description : If an ac voltmeter is connected between the S2 and S3 windings on a TX, at what two rotor positions should the voltmeter read maximum voltage?

Last Answer : . 150º and 330º

What is the amplitude and voltage induced into the rotor when the CX is turned 90º while the CT remains on electrical zero?

Description : What is the amplitude and voltage induced into the rotor when the CX is turned 90º while the CT remains on electrical zero?

Last Answer : The voltage is maximum and in phase with the ac excitation voltage to the CX.

When a CT is on electrical zero, what is the relationship between its rotor and the S2 winding?

Description : When a CT is on electrical zero, what is the relationship between its rotor and the S2 winding?

Last Answer : They are perpendicular to each other.

What three things prevent a CT rotor from turning when voltages are applied to its stator windings?

Description : What three things prevent a CT rotor from turning when voltages are applied to its stator windings?

Last Answer : The rotor is specially wound, it is never connected to an ac supply, and its output is always applied to a high-impedance load.

In a TDR system connected for addition in what direction will the TDR rotor field turn when the TX rotor to which it is connected turns counterclockwise?

Description : In a TDR system connected for addition in what direction will the TDR rotor field turn when the TX rotor to which it is connected turns counterclockwise?

Last Answer : Clockwise.

What is the angular position of a TX rotor when it is

Description : What is the angular position of a TX rotor when it is

Last Answer : The S1 and S3 leads are reversed between the TX and the TDX, and the R1 and R3 leads are reversed between the TDX rotor and the TR.

In a TDX system when does the TR rotor follow the TX rotor exactly?

Description : In a TDX system when does the TR rotor follow the TX rotor exactly?

Last Answer : . When the TDX rotor is on 0º.

In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Description : In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Last Answer : . 80º.

On the synchro schematic symbol, what indicates the angular displacement of the rotor?

Description : On the synchro schematic symbol, what indicates the angular displacement of the rotor?

Last Answer : . The position of the arrow.

In a roll crusher, both the rolls (A) Have the same diameter (B) Are rotated towards each other (C) Run either at the same or different speeds (D) All (A), (B) and (C

Description : In a roll crusher, both the rolls (A) Have the same diameter (B) Are rotated towards each other (C) Run either at the same or different speeds (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Which of the following isn’t the property of a taper roller bearing? (a) High rigidity (b) Easy dismantling (c) Take low radial and heavy loads (d) It is unsuitable for high speed applications

Description : Which of the following isn’t the property of a taper roller bearing? (a) High rigidity (b) Easy dismantling (c) Take low radial and heavy loads (d) It is unsuitable for high speed applications

Last Answer : (c) Take low radial and heavy loads

The synchronous speed for a 3 phase 6-pole induction motor is 1200 rpm. If the number of poles is now reduced to 4 with the frequency remaining constant, the rotor speed with a slip of 5% will be _________. (A) 1690 rpm (B) 1750 rpm (C) 1500 rpm (D) 1710 rpm

Description : The synchronous speed for a 3 phase 6-pole induction motor is 1200 rpm. If the number of poles is now reduced to 4 with the frequency remaining constant, the rotor speed with a slip of 5% will be _________. (A) 1690 rpm (B) 1750 rpm (C) 1500 rpm (D) 1710 rpm

Last Answer : (D) 1710 rpm

The speed of a multi-speed, squirrel-cage, induction motor operating in a fixed frequency system can be changed by _____________. A. reconnecting stator windings for different numbers of poles B. changing the RPM of the rotor flux C. changing the phase sequence of the applied voltage D. reconnecting the stator so that no poles have the same polarity

Description : The speed of a multi-speed, squirrel-cage, induction motor operating in a fixed frequency system can be changed by _____________. A. reconnecting stator windings for different numbers of poles B. ... sequence of the applied voltage D. reconnecting the stator so that no poles have the same polarity

Last Answer : Answer: A

An electric motor in which both stator field and rotor rotates with same speed is called?

Description : An electric motor in which both stator field and rotor rotates with same speed is called?

Last Answer : An electric motor in which both stator field and rotor rotates with same speed is called synchronous motor.

What do you put in your Gyro?

Description : What do you put in your Gyro?

Last Answer : Ooh, maybe some babaganoush if it’s available?

Let's settle this once and for all: How do you pronounce "Gyro"? (Sandwhich)

Description : Let's settle this once and for all: How do you pronounce "Gyro"? (Sandwhich)

Last Answer : \ˈyē-ˌrō, ˈzhir-ō\

How do you pronounce gyro?

Description : How do you pronounce gyro?

Last Answer : Jai-row.

Does the Huawei p9 lite have a gyro (gyroscope) sensor?

Description : I'm wondering if the Huawei p9 lite has this gyro sensor. I want to add VR goggles, and the minimum hardware requirements are that the phone display be at least full HD, with an accelerometer and a gyro sensor. I'm talking about the glasses.      

Last Answer : The Huawei P9 lite has these sensors: Sensors: Fingerprint (rear-mounted), accelerometer, proximity, compass The accelerometer is there, but I can't see the gyroscope. Of course, it's worth checking out if ... think it's in it and I looked at it on the page recommended by the glasses distributor. 

How minutes in one degree of gyro compass?

Description : How minutes in one degree of gyro compass?

Last Answer : There are 60 minutes in 1 degree.

What is a Greek Gyro recipe?

Description : What is a Greek Gyro recipe?

Last Answer : A gyro is a wrap that is typically filled with pork, tzatziki, and vegetables. I have never made gyros so all I can suggest is to look on a cooking website or in a cook book.

Does the Nintendo Switch Lite have gyro controls?

Description : Does the Nintendo Switch Lite have gyro controls?

Last Answer : Yes, the Switch Lite has a gyroscope and accelerometer.

As shown in the illustrations, fine adjustments such as 'weather' and 'turning rate' have no effect on steering stand operation when the 'operation control switch' is in ____________. EL-0097 A. GYRO B. HAND C. NFU D. DIFF

Description : As shown in the illustrations, fine adjustments such as 'weather' and 'turning rate' have no effect on steering stand operation when the 'operation control switch' is in ____________. EL-0097 A. GYRO B. HAND C. NFU D. DIFF

Last Answer : Answer: C

As shown in the illustrations, feedback or rudder angle repeatback is used by the steering stand in which operational modes? EL-0097 A. Gyro-compass and hand steering only B. Hand steering and non-followup only C. Non-followup and gyro-compass only D. Gyro-compass and synchronizing only

Description : As shown in the illustrations, feedback or rudder angle repeatback is used by the steering stand in which operational modes? EL-0097 A. Gyro-compass and hand steering only B. Hand steering and non-followup only C. Non-followup and gyro-compass only D. Gyro-compass and synchronizing only

Last Answer : Answer: A

What controls rudder movement when the Operation Selector Switch shown in the illustration is in the 'NFU' position? EL-0097 A. Steering wheel B. Non-followup controller C. Gyro-compass D. Course selector pointer

Description : What controls rudder movement when the Operation Selector Switch shown in the illustration is in the 'NFU' position? EL-0097 A. Steering wheel B. Non-followup controller C. Gyro-compass D. Course selector pointer

Last Answer : Answer: B

What controls the rudder when the 'operation selector switch' of the steering stand shown in the illustration is in the 'HAND' position? EL-OO98 A. Non-followup controller B. Gyro-compass C. Course selector pointer D. Steering wheel

Description : What controls the rudder when the 'operation selector switch' of the steering stand shown in the illustration is in the 'HAND' position? EL-OO98 A. Non-followup controller B. Gyro-compass C. Course selector pointer D. Steering wheel

Last Answer : Answer: D

What is the highest frequency that can be sent straight upward and be returned to earth? A. MUF B. Gyro frequency C. Skip frequency D. Critical frequency

Description : What is the highest frequency that can be sent straight upward and be returned to earth? A. MUF B. Gyro frequency C. Skip frequency D. Critical frequency

Last Answer : D. Critical frequency

Highest frequency that can be used for skywave HF communications between two given points on earth. A. Gyro frequency B. Maximum usable frequency C. Critical frequency D. Virtual frequency

Description : Highest frequency that can be used for skywave HF communications between two given points on earth. A. Gyro frequency B. Maximum usable frequency C. Critical frequency D. Virtual frequency

Last Answer : B. Maximum usable frequency

Arange ofmicrowave frequenciesmore easilypassed bythe atmospherethan are theothersis called a a.window b. critical frequency c. gyro frequency range d. resonance in the atmosphere

Description : Arange ofmicrowave frequenciesmore easilypassed bythe atmospherethan are theothersis called a a.window b. critical frequency c. gyro frequency range d. resonance in the atmosphere

Last Answer : a.window