State the meaning of G90, G91.

State the meaning of G90, G91.
by

1 Answer

Answer :

Meaning of following G-Codes:

G90 :- Absolute Dimensioning

G91:- Incremental Dimensioning
by

Related questions

Give the meaning of following ISO codes. 1) M02 2) M30 3) G90 4) G91

Description : Give the meaning of following ISO codes. 1) M02 2) M30 3) G90 4) G91

Last Answer : Meaning of ISO codes. 1) M02-Program end 2) M30-Program stop & Tape rewind 3) G90 :- Absolute Dimensioning 4) G91:- Incremental Dimensioning

State the function of the programming code. (i) G01 (ii) G90

Description : State the function of the programming code. (i) G01 (ii) G90

Last Answer : (i) G01: Linear Interpolation. (ii) G90: Absolute Programming.

Maximum spindle speed limitation code in CNC Machine a.G90 b.G91 c.G92 d.G93

Description : Maximum spindle speed limitation code in CNC Machine a.G90 b.G91 c.G92 d.G93

Last Answer : c.G92

Write CNC program format with meaning of each term.

Description : Write CNC program format with meaning of each term.

Last Answer : N001 G01 X12345 Y06789 M03 EOB 1. N001 represents the sequence number of the operation. 2. G01 represents linear interpolation 3. X12345 will move the table 1.2345 in. in a positive direction along the X axis. ... in. along the Y axis. 5. M03 Spindle on CW. 6. EOB End of Block

List any four G codes, give their meaning.

Description : List any four G codes, give their meaning.  

Last Answer : Answer:

Explain the shielded metal arc welding (SMAW) processes with neat sketch. State its two advantages and disadvantages.

Description : Explain the shielded metal arc welding (SMAW) processes with neat sketch. State its two advantages and disadvantages.

Last Answer : Working  : Shielded metal arc welding uses a metallic consumable electrode of a proper composition for generating arc between itself and the parent work piece. The molten electrode metal fills the weld ... . 2. Weld may contain slag inclusions 3. Fumes make difficult the process control.

Explain the resistance spot welding process with neat sketch. State its two advantage and disadvantage.

Description : Explain the resistance spot welding process with neat sketch. State its two advantage and disadvantage. 

Last Answer : Resistance Spot welding: Spot welding is employed to join overlapping strips, sheets or plates of metal at small areas .The pieces are assembled between two electrodes, which must possess high electrical & thermal ... for making the RSW a success. 4. The thick jobs are not easy to weld. 

Draw flatter and Fuller. State its use in forging.

Description : Draw flatter and Fuller. State its use in forging.

Last Answer : 1. Fuller: Use of Fuller: Fuller is a forging tool, used to spread the metal. The fuller is placed against the metal stock, and then either the fuller or the stock is struck ... are used to give smoothness and accuracy to articles which have already been shaped by fullers and swages. 

What is interpolation? State its types. Explain linear interpolation with neat sketch

Description : What is interpolation? State its types. Explain linear interpolation with neat sketch

Last Answer : Definition : When the feed rates of individual axis are not constant and they vary continuously through the move it is called interpolation. Following are the types of interpolation: 1. G00- Rapid Traverse 2. ... to clear the job for loading /Unloading N9 M02 EOB  Programme End.  

State the function of G00, G94, M08 and M30 used in CNC part programming.

Description : State the function of G00, G94, M08 and M30 used in CNC part programming. 

Last Answer : 1) G00 :- Rapid Traverse Function G00 is the basic G-code for CNC programming to initiate rapid motion mode i.e used for quickly positioning the tool. G00 can be used where the tool is not ... production. As soon as the program ends he can place the next component and start the next cycle. 

State salient features of CNC machines.

Description : State salient features of CNC machines.

Last Answer : Salient Features of CNC machines .. 1. A part program can be fed to the controller unit through a keyboard. 2. The part program once entered can be used again and again. That is why ... control unit allows compensation for any changes in the dimensions of cutting tools caused due wear or otherwise. 

Name the different types of presses used in industry. State the working principle of press.

Description : Name the different types of presses used in industry. State the working principle of press. 

Last Answer : Types of presses used in industry: According to Source of power to ram: 1. Crank 2. Cam 3. Eccentric 4. Power screw 5. Rack and pinion 6. Toggle 7. ... ) hydraulic, mechanical, pneumatic and respectively working on principle of Pascal law, Mechanical Pressure and Pneumatic Pressure.

State the factors on which weldability depends.

Description : State the factors on which weldability depends.

Last Answer : Factors on which weldability depends: 1. Material grade, material thickness, design, weld property requirement 2. Equipment type, edge preparation design 3. Tip / work piece distance, ... Cost of materials 15. Code or specification requirements 16. Mechanical properties desired in joints

State any two advantages of forging process.

Description : State any two advantages of forging process. 

Last Answer : Advantages of forging processes: 1) Complex shaped parts can be forged 2) Mass production with greater accuracy is achieved. 3) It is very easy to maintain close tolerances. 4) ... highly skilled operator. 6) Better reproducibility. 7) Machining is not necessary to obtain final shape 

State function of preparatory and miscellaneous code with two examples each.

Description : State function of preparatory and miscellaneous code with two examples each.

Last Answer : Function of Preparatory Code (G-Code): Preparatory functions are the G-codes that identify the type of activities the machine will execute. [1] A program block may contain one or more G-codes. [2 ... (CW) Rotation M06 Tool Change M08 Coolant On M09 Coolant Off M30 Program Stop and Tape Rewind

State canned cycle & subroutines.

Description : State canned cycle & subroutines.

Last Answer : Canned cycle (Fixed cycle): It is defined as a set of instructions, inbuilt or stored in the system memory, to perform a fixed sequence of operations. [1] It reduces programming time and ... also called as sub programs. [4] After completion of subroutine the control returns to main program. 

State advantages of CNC over NC.

Description : State advantages of CNC over NC.

Last Answer : Advantages of CNC over NC 1. Complex machining operations can be easily done. 2. It requires less inspection. 3. It reduces scrap & waste. 4. It gives high production rate. 5. ... is available in CNC lathe which gives idea about job. This feature is not available in conventional machine 

State blasting and tumbling.

Description : State blasting and tumbling.

Last Answer : 1. Blasting (Abrasive blast cleaning): This method is widely used for removing all classes of scale and rust from forgings, Castings, weld elements, and heat treated parts. Depending on the finish ... by friction a fine cutting action which removes fins, flashes, and scales from the products. 

Enlist die accessories and state function of knock out

Description : Enlist die accessories and state function of knock out

Last Answer : Die Accessories are as follows: 1) Stops a)Button stop b) Lever stop 2) Pilot a)Direct pilot b)Indirect Pilot 3) Knock out 4) Strippers a) Fixed stripper b) Spring ... Pad Knock out: The function of knock out is to eject the finished components from the die cavity. 

State terminology used in presses

Description : State terminology used in presses

Last Answer : Shut Height- The space available between the press bed or bolster and the slide or ram is called the shut height. It is always measured with the press shut or at bottom dead center. It may ... the motion. Stroke length relates to speed ranges, the longer the stroke the slower the press speed range.

Classify forging. State Fullering

Description : Classify forging. State Fullering

Last Answer : Answer: Classification of forging processes 1.Open die forging: a) Hand forging b) Power forging: i. Hammer forging ii. Press forging 2.Close die forging: a) Drop forging b) ... The force is applied on the top fuller which results in decreasing the cross section at that point.  

State machine reference point for CNC.

Description : State machine reference point for CNC. 

Last Answer : The machine reference point – R The position of the reference point R is determined by the manufacturer. The value of machine reference co-ordinates XMR and ZMR are fixed and cannot be changed by the user. The machine reference point serves for the calibration of the measuring system.

State objective of surface cleaning.

Description : State objective of surface cleaning.

Last Answer : Objective of surface cleaning is to remove oil and grease from machined surface when extreme cleanliness is required.

State the function of „G‟ Codes and „M‟ codes with any two examples.

Description : State the function of „G‟ Codes and „M‟ codes with any two examples.

Last Answer : G Codes ( Preparatory Functions) The preparatory function instructs the machine tool to get prepared for the operation to follow, the preparatory function is represented by two digits preceded by letter G e.g. ... . i) M02 - Program end ii) M06 - Tool change iii) M08 - Coolant ON

State the procedure for developing the part program.

Description : State the procedure for developing the part program. 

Last Answer : Procedure for developing part program There are two methods of part programming:- A) Manual Part Programming: To prepare a part program using the manual method 1) The programmer writes the ... verified for accuracy. 5)The NC system machine makes the part according to the instructions on tape 

State the working principle of gas welding.

Description : State the working principle of gas welding.

Last Answer : Working principle of gas welding: Gas Welding is a fusion welding process. It joins metals, using the heat of combustion of the oxygen/air and combustible gas (i.e. acetylene, hydrogen, propane, ... the components to be forced together under pressure until the weld is forms and solidifies. 

State “Plane washer” making process with use of combination die.

Description : State “Plane washer” making process with use of combination die.

Last Answer : (Note: The plain washers can be produced by using Compound die or Progressive die. It is not possible to use combination die for making plain washers, so consider compound die or progressive die for answer. ... Stop 2.sheet metal 3.pilot 4.blanking punch 5.ram 6.piercing punch 7.stripper 8.die

State the forging sequence for production of spanner.

Description : State the forging sequence for production of spanner.

Last Answer : Forging sequence for production of spanner Forging Sequence for Spanner: (1) The heated stock is elongated by reducing its cross section in first die. The operation is known as Fullering . (2) ... (5) Flash is removed. (6) Heat treatment and machining is done as per requirement.

State the function of following codes: (1) G18, (2) G71, (3) M05, (4) M30

Description : State the function of following codes: (1) G18, (2) G71, (3) M05, (4) M30

Last Answer : G18 – aligns the arc plane with the X and Z axes G71-Metric Input or input in mm, M05- Spindle stop M30-End of program & reset 

State function of ATC in CNC machine.

Description : State function of ATC in CNC machine.

Last Answer : An Automatic tool changer or ATC is used in computerized numerical control (CNC) machine tools to improve the production and tool carrying capacity of the machine. ATC changes the tool very quickly, reducing the non-productive time.

State the function of pilot and stopper in a die.

Description : State the function of pilot and stopper in a die.

Last Answer : Function of pilot and Stopper: Pilots: The pilot positions the stock strip accurately and bring it into proper position for blanking and piercing operations. They act as guides during the piercing or blanking ... it is fed below the punch to give the greatest output in given length of the plate. 

Explain constructional features, and working of progressive die. Also state the functions of any four parts of progressive die.

Description : Explain constructional features, and working of progressive die. Also state the functions of any four parts of progressive die. 

Last Answer : Constructional features and Working of Progressive Die:  A progressive die consists of the following parts. 1. Stop 2. Sheet metal 3. Pilot 4. Blanking punch 5. Ram 6. Piercing ... 7. Piercing punch: The function of piercing punch is to produce punched holes into the sheet metal. 

State the various advantages and limitations of CNC machine.

Description : State the various advantages and limitations of CNC machine. 

Last Answer : Advantages of CNC Machines:-  [1] Greater machine utilization. [2] Complex machining operations can be easily done. [3] It gives high degree of accuracy. [4] It requires less inspection. [5] ... tooling cost. 6) Temperature, humidity & dust must be affect machining. 7) Initial cost is high. 

State advantages and limitations of honing process.

Description : State advantages and limitations of honing process. 

Last Answer : Advantages: 1. Less complex or low cost fixtures. 2. It is highly accurate. 3. It can be used for both long and short bores. 4. It maintains original bore centerline. 5. Any ... rotated or supported. If the workpiece is thin, even hand pressure may cause a slightly oval hole. 

Give detail classification of welding. State important factors upon which selection of welding process depends.

Description : Give detail classification of welding. State important factors upon which selection of welding process depends. 

Last Answer : Answer: Classification of Welding 1. Arc welding a. Carbon Arc Welding; b. Shielded Metal Arc Welding (SMAW) c. Submerged Arc Welding (SAW) d. Metal Inert Gas Welding (MIG, ... workers 14. Cost of materials 15. Code or specification requirements 16. Mechanical properties desired in joints 

State the functions of the following die accessories: pilots, stops, strippers, pressure pad.

Description : State the functions of the following die accessories: pilots, stops, strippers, pressure pad. 

Last Answer : Answer: Functions of die accessories. 1. Pilots: The pilot positions, the stock strip accurately and bring it into proper position for blanking and piercing operations. They act as guides during the ... 4. Pressure pad: It is used for drawing operation for maintaining flat surface of the cup. 

State various advantages and limitations of forging processes.

Description : State various advantages and limitations of forging processes. 

Last Answer : Answer: Advantages of forging processes  1) Complex shaped parts can be forged 2) Mass production with greater accuracy is achieved. 3) It is very easy to maintain close tolerances. 4) ... cannot be produced by forging. 8) Rapid oxidation of metal surface at high temperature wears the dies 

State any four applications of resistance welding.

Description : State any four applications of resistance welding. 

Last Answer : Answer: Applications of resistance welding: 1. Resistance welding is widely used in automotive industries. 2. Projection welding is widely used in production of nut and bolt. Projection welding is ... welding is applied in manufacturing of wheel rims, wire joints and railway track joints etc. 

State different methods by which forged components can be made.

Description : State different methods by which forged components can be made. 

Last Answer : Answer: Different types of forging method - I. Open die forging: a) Hand forging b) Power forging: i. Hammer forging ii. Press forging II. Close die forging: a) Drop forging b) Press forging c) Machine forging OR

State the principle used in Lapping. List four applications of Lapping.

Description : State the principle used in Lapping. List four applications of Lapping.

Last Answer : Principle of Lapping: Lapping is basically an abrasive process in which loose abrasives function as cutting points finding momentary support of the lap. The process has the following features. (a) Use of ... roller bearings ii. Gears iii. Piston rings iv. Slip gauges v. Crankshaft.

State four advantages and limitations of forging.

Description : State four advantages and limitations of forging.

Last Answer : Advantages of Forging: 1. Strength: i. Forging reduces the failures. ii. High strength to weight ratio. iii. It can be able to withstand fluctuating stress caused by sudden shock loading. ... be produced by forging. 8. Rapid oxidation of metal surface at high temperature wears the dies.

State four advantages of CNC machines over conventional machines.

Description : State four advantages of CNC machines over conventional machines.

Last Answer : Advantages of CNC machines over conventional machines: 1) Greater machine utilization. 2) Complex machining operations can be easily done. 3) It gives high degree of accuracy. 4) It requires less ... is reduced. 15) Elimination of special jigs and fixtures. 16) Accurate costing & scheduling. 

State four advantages of welding.

Description : State four advantages of welding.

Last Answer : Advantages of Welding Process: 1) It produce permanent joint. 2) Large number of metals can be welded. 3) Freedom in design. 4) Strong and tight joining 5) Cost effectiveness 6) Simplicity of welded structures design 7) Welding processes may be mechanized and automated.

Sketch and describe the following press operations: 1. Punching 2. Shearing and 3. Trimming

Description : Sketch and describe the following press operations: 1. Punching 2. Shearing and 3. Trimming

Last Answer : (i) Punching : In punching operation, a hole is the desired result. The size of hole is determined by the size of punch and clearance is allowed on the die. The figure shows the ... still hot for maximum efficiency; therefore it is usually incorporated into the larger production process.

Describe with sketch the surface treatment process used to built-up worn out metal components of automotive engines.

Description : Describe with sketch the surface treatment process used to built-up worn out metal components of automotive engines.

Last Answer : Metal spraying is to build-up worn out metal components of automotive engines.   Metal Spraying of metalizing literally means to treat with or coat with a metal or metallic compound. Metalizing as ... being coated, by compressed air. A sectional view of metal spraying gun is shown in fig.  

Explain with sketch construction and application of progressive die.

Description : Explain with sketch construction and application of progressive die.

Last Answer : OR Construction A progressive die consists of the following parts.: 1. Stop 2. Sheet metal 3. Pilot 4. Blanking punch 5. Ram 6. Piercing punch 7. Stripper Plate 8. Die ... such as automotive, electronics and appliances. Example car brake caliper, washer, lid of a beverage can etc.

Draw neat labeled sketch of ply press.

Description : Draw neat labeled sketch of ply press.

Last Answer : sketch of ply press

Explain seam welding process with the help of neat sketch.

Description : Explain seam welding process with the help of neat sketch.

Last Answer : Seam Welding is a Resistance Welding (RW) process used for producing continuous joint of overlapping sheets by passing them between two rotating electrode wheels. Heat generated by the electric current flowing through ... the electrodes and cool the work rapidly to speed up the operation.    

List the materials used in press work for automobile components parts with example.

Description : List the materials used in press work for automobile components parts with example.

Last Answer : Materials used in press work: 1) Aluminium, 2) Copper, 3) Brass, 4) Mild Steel, 5) Galvanized iron (G.I) sheets, 6) Duralumin, 7) Y-alloys, 8) Naval Brass, 9) Cartridge Brass, ... 8) Carburettor bodies 9) Valves 10) Combustion Chamber 11) Cylinder heads , blocks,  12) Gear box cases

Explain the following press operations (a) Punching (b) Drawing

Description : Explain the following press operations (a) Punching (b) Drawing

Last Answer : a) Punching: In punching operation, a hole is the desired result. The size of hole is determined by the size of punch and clearance is allowed on the die. The figure shows the spacing of hole on plate2 ... between punch and die is greater. [5] The drawing operation is illustrated in Fig.