How Sandbags Can Prevent Water Damage?

How Sandbags Can Prevent Water Damage?
by

1 Answer

Answer :

Sandbags can become a property owner’s best friend during timesof torrential rainfall or when a nearby river has overflowed itsbanks. Anyone who owns a home near a lake, oceanfront, river orstream can use properly posititoned sandbags to protect theirproperty and divert flowing or rushing water away from buildings toprevent flood damage.The best sandbags are constructed from burlap, a sturdy materialthat won’t tear or break or slip out of your hands which can happenwith plastic bags. There are also woven plastic bags designed toserve as sandbags that are less expensive than the burlap varietyand work equally as well. It’s important to have these bags on handbefore the danger of flooding is announced, purchased from yourlocal hardware supply store or obtained from your local citygovernment.
by
selected by

Related questions

Where do the sandbags go when the floodwater recedes?

Description : Where do the sandbags go when the floodwater recedes?

Last Answer : They are considered contaminated and have to be disposed of as hazardous waste. The sand and gravel inside them are also considered hazardous waste.

How to Choose the Right Sandbags?

Description : How to Choose the Right Sandbags?

Last Answer : Sandbags provide a simple, effective, and inexpensive use formany things, including protection from floods, reinforcingstructures, diversion of water, control of erosion, construction oflevees, and extra weight ... empty and filled beforeuse so they do not deteriorate, though some may be treated

How do you make your own sandbags at home?

Description : How do you make your own sandbags at home?

Last Answer : Get burlap sacks and sand and fill them. You can buy sand at landscaping stores.

Is there a formula I can use to calculate how many sandbags I should get?

Description : Is there a formula I can use to calculate how many sandbags I should get?

Last Answer : You will need 800 sandbags for every 1 ft of wall that needs covering.

Where can you buy the bags you need to make sandbags?

Description : Where can you buy the bags you need to make sandbags?

Last Answer : You can get them at rawmaterials.com and go under the art selection

where can I find sandbags in dallas tx?

Description : where can I find sandbags in dallas tx?

Last Answer : I would try a local hardware store, or some place like Home Depot.

"I know sandbags are used for levees, but what are some other uses"?

Description : "I know sandbags are used for levees, but what are some other uses"?

Last Answer : Sandbags can be used to fortify just about anything. The military has used sandbags as temporary field fortifications for a long time. Sandbags have also been used in miniature versions as ammunition for certain weapons. Sandbags are used as a prop in yoga classes.

Can applying coconut oil before bleaching my hair prevent less damage?

Description : Can applying coconut oil before bleaching my hair prevent less damage?

Last Answer : answer:My mother was a hairstylist for several years and her rule of thumb for coloring hair was always that the hair should be as clean as possible before applying chemicals. However, I did some poking around and ... and go to sleep. 3. Bleach hair as usual the next day with oil still in the hair.

My cat vs. my carpet. How can I prevent this damage?

Description : My cat vs. my carpet. How can I prevent this damage?

Last Answer : Hard wood. Go Brazilian!

What should I be doing to prevent damage to my knees in the present and the future caused by running/ jogging?

Description : What should I be doing to prevent damage to my knees in the present and the future caused by running/ jogging?

Last Answer : The only way I can think of is to stop jogging. Maybe try swimming instead. Don’t ruin your joints. You’ll regret it later.

how high should beet plants be before thinning to prevent root damage

Description : how high should beet plants be before thinning to prevent root damage

Last Answer : Need Answer

Would a bollard covers be able to help prevent damage?

Description : Would a bollard covers be able to help prevent damage?

Last Answer : Bollard covers do help in preventing damage, however, any time you frequently use a pool table, it will begin showing signs of use.

What is the best protectant (bubble wrap, peanuts, paper, etc.) to use in a box to prevent a product to damage during shipment?

Description : What is the best protectant (bubble wrap, peanuts, paper, etc.) to use in a box to prevent a product to damage during shipment?

Last Answer : Mailer box is widely used to send goods both locally and internationally. They are very popular because of their strength. The sturdy cardboard stock that is used to make them is the secret of ... properly. Generally, they have a rectangular shape, but they can be customized into any desired shape.

An electrical appliance is earthed to 1. Protect the appliance against any damage 2. Prevent electric shocks 3. Avoid short-circuiting Which of the above is/are correct? (a) 1 only (b) 2 only (c) 1 and 2 (d) 2 and 3

Description : An electrical appliance is earthed to 1. Protect the appliance against any damage 2. Prevent electric shocks 3. Avoid short-circuiting Which of the above is/are correct? (a) 1 only (b) 2 only (c) 1 and 2 (d) 2 and 3

Last Answer : Ans:(b)

To prevent damage from lightning, lightning conductors are used on tall structures. The lightning conductor – (1) should be made of a good conductor but can be of any shape (2) should be in the form of a vertical rod (3) can be of any shape (4) should be made of a good conductor like copper with sharp-pointed edges

Description : To prevent damage from lightning, lightning conductors are used on tall structures. The lightning conductor - (1) should be made of a good conductor but can be of any shape (2) should be in the form ... can be of any shape (4) should be made of a good conductor like copper with sharp-pointed edges

Last Answer : (4) should be made of a good conductor like copper with sharppointed edges Explanation: A lightning conductor is made up of a sharp pointed metal (usually copper metal, as it is a very good ... cloud, it will first strike the pointed tip of the lightning conductor and quickly travel to the earth.

Air gap readings for electrical generating equipment should be taken periodicly. This is to _______. I. determine the condition of the bearings II. prevent damage to the rotor and stator A. I only B. II only C. both I and II D. neither I or II

Description : Air gap readings for electrical generating equipment should be taken periodicly. This is to _______. I. determine the condition of the bearings II. prevent damage to the rotor and stator A. I only B. II only C. both I and II D. neither I or II

Last Answer : Answer: C

The air gap in an induction motor should be periodically checked with a feeler gage to prevent possible ___________. A. rotor contact with the stator B. axial misalignment of the rotor C. damage to the motor bearings D. electrical damage to the bearings

Description : The air gap in an induction motor should be periodically checked with a feeler gage to prevent possible ___________. A. rotor contact with the stator B. axial misalignment of the rotor C. damage to the motor bearings D. electrical damage to the bearings

Last Answer : Answer: A

Before servicing the device indicated as 'A' in panels #1 and #3 of the illustration, the device labeled 'CT' must __________. EL-0003 A. have the disconnected leads taped to prevent short circuiting. B. only be connected to multimeter on the ammeter setting C. be short circuited D. have one lead grounded to discharge static electricity for the prevention of damage to electronic components

Description : Before servicing the device indicated as 'A' in panels #1 and #3 of the illustration, the device labeled 'CT' must __________. EL-0003 A. have the disconnected leads taped to prevent ... D. have one lead grounded to discharge static electricity for the prevention of damage to electronic components

Last Answer : Answer: C

When measuring AC current flow, you must always connect the meter _____________. A. in series with the power source and load B. in parallel with the power source and load C. insuring correct polarity D. using the lowest range possible to prevent instrument damage

Description : When measuring AC current flow, you must always connect the meter _____________. A. in series with the power source and load B. in parallel with the power source and load C. insuring correct polarity D. using the lowest range possible to prevent instrument damage

Last Answer : Answer: A

When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Description : When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Last Answer : Answer: B

When a solid-state component of an electronic circuit is mounted to a metallic mass, the general purpose of that mass is to ____________. A. prevent vibration damage to delicate components B. prevent mechanical damage to solid-state components C. dissipate stray magnetic currents D. act as a heat sink

Description : When a solid-state component of an electronic circuit is mounted to a metallic mass, the general purpose of that mass is to ____________. A. prevent vibration damage to delicate components B. prevent ... damage to solid-state components C. dissipate stray magnetic currents D. act as a heat sink

Last Answer : Answer: D

Which of the listed procedures should be carried out to prevent moisture damage to electrical apparatus during extended periods of idleness? A. Fill the motor housing with CO2 to inert the space. B. Strap silica gel around the commutator. C. Place heat lamps in the motor housings. D. Cover the equipment with a canvas tarpaulin.

Description : Which of the listed procedures should be carried out to prevent moisture damage to electrical apparatus during extended periods of idleness? A. Fill the motor housing with CO2 to inert the space. B. Strap ... C. Place heat lamps in the motor housings. D. Cover the equipment with a canvas tarpaulin.

Last Answer : Answer: C

When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only and a low resistance meter for DC measurements C. whenever a low impedance meter is not available, regardless of the components being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Description : When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only ... being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Last Answer : Answer: D

External shunts are sometimes used with ammeters to _______. A. increase meter sensitivity B. permit shunts with larger resistances to be utilized C. prevent damage to the meter movement from heat generated by the shunt D. enable the construction of a compact meter with a virtually unlimited range

Description : External shunts are sometimes used with ammeters to _______. A. increase meter sensitivity B. permit shunts with larger resistances to be utilized C. prevent damage to the meter movement from heat generated by the shunt D. enable the construction of a compact meter with a virtually unlimited range

Last Answer : Answer: C

The purpose of staking is to a. Protect the trunk b. Prevent root damage due to wind action c. Prevent wind injury to branches d. Prevent damage due to fros

Description : The purpose of staking is to a. Protect the trunk b. Prevent root damage due to wind action c. Prevent wind injury to branches d. Prevent damage due to fros

Last Answer : Prevent wind injury to branches

Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Description : Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Last Answer : D) All of the above.

What material is applied to electronic assemblies to prevent damage from corrosion, moisture, and stress?

Description : What material is applied to electronic assemblies to prevent damage from corrosion, moisture, and stress?

Last Answer : Conformal coating

What structurally large, low-resistance conductor is connected in parallel with the meter movement to prevent damage?

Description : What structurally large, low-resistance conductor is connected in parallel with the meter movement to prevent damage?

Last Answer : Shunt.

In the event of cabin depressurization, the actions of the pilot will be to: a. Immediately commence a diversion to a suitable alternate b. Increase engine power to provide additional airflow to the pressurization systems c. Maintain the aeroplane altitude to prevent further damage to the airframe by over loading of the structure d. Commence a descent to an altitude where the supplemental oxygen supply is sufficient for all crew and passengers

Description : In the event of cabin depressurization, the actions of the pilot will be to: a. Immediately commence a diversion to a suitable alternate b. Increase engine power to provide additional ... a descent to an altitude where the supplemental oxygen supply is sufficient for all crew and passengers

Last Answer : d. Commence a descent to an altitude where the supplemental oxygen supply is sufficient for all crew and passengers

To prevent damage from lightning, lightning conductors are used on tall structures. The lightning conductor (1) should be made of a good conductor but can be of any shape (2) should be in the form of a vertical rod (3) can be of any shape (4) should be made of a good conductor like copper with sharp-pointed edges

Description : To prevent damage from lightning, lightning conductors are used on tall structures. The lightning conductor (1) should be made of a good conductor but can be of any shape (2) should be in the form of ... can be of any shape (4) should be made of a good conductor like copper with sharp-pointed edges

Last Answer : should be made of a good conductor like copper with sharp-pointed edges