What does 0.42 round to?

What does 0.42 round to?
by

1 Answer

Answer :

To the nearest tenth it is 0.4
by
selected by

Related questions

Round the number 42.763 to 1 decimal place?

Description : Round the number 42.763 to 1 decimal place?

Last Answer : 42.8

A, B and C start at the same time in the same direction to run around a circular stadium. A completes a round in 252 seconds, B in 308 seconds and C in 198 seconds, all starting at the same point. After what time will they meet again at the starting point? A.15 minutes 15 seconds B.42 minutes 30 seconds C.42 minutes D.46 minutes 12 seconds E.None of these

Description : A, B and C start at the same time in the same direction to run around a circular stadium. A completes a round in 252 seconds, B in 308 seconds and C in 198 seconds, all starting at the same point ... A.15 minutes 15 seconds B.42 minutes 30 seconds C.42 minutes D.46 minutes 12 seconds E.None of these

Last Answer : Answer – D (46 minutes 12 seconds) Explanation – L.C.M. of 252, 308 and 198 = 2772.So, A, B and C will again meet at the starting point in 2772 see i.e., 46 min. 12 sec

Convert each of the following decimals into a percentage: (i) 0.6 (ii) 0.42 (iii) 0.07 (iv) 0.005 -Maths

Description : Convert each of the following decimals into a percentage: (i) 0.6 (ii) 0.42 (iii) 0.07 (iv) 0.005 -Maths

Last Answer : answer:

Find the number of significant figures in the following numbers, i. 25.42 ii. 0.004567 iii. 35.320 iv. 91.000

Description : Find the number of significant figures in the following numbers, i. 25.42 ii. 0.004567 iii. 35.320 iv. 91.000

Last Answer : Find the number of significant figures in the following numbers, i. 25.42 ii. 0.004567 iii. 35.320 iv. 91.000

What is 0.42 repeting as a fraction?

Description : What is 0.42 repeting as a fraction?

Last Answer : It is not possible to answer the question because it isambiguous: the answer depends on what string is repeating. It isnot clear from the question whether the fraction is meant to be0.424242... or 0.4222... .

What is 0.42 times 10?

Description : What is 0.42 times 10?

Last Answer : The product is 4.2

What is 0.42 times 10?

Description : What is 0.42 times 10?

Last Answer : The product is 4.2

What is 0.42 times 0.2?

Description : What is 0.42 times 0.2?

Last Answer : 0.42 × 0.2 = 0.084

A trait has two alleles, and their frequencies are represented by p and q. If p=0.42, what is q?

Description : A trait has two alleles, and their frequencies are represented by p and q. If p=0.42, what is q?

Last Answer : 0.58

What is the molecular formula of the compound CH2 with molar mass = 42.0?

Description : What is the molecular formula of the compound CH2 with molar mass = 42.0?

Last Answer : Apex

What is 96.6 divide by 0.42?

Description : What is 96.6 divide by 0.42?

Last Answer : 230

What is actual length in feet of a one-half wavelength of a coax with a velocity factor of 0.59 at 26 MHz? A. 11.16 B. 40.29 C. 42.46 D. 46.28

Description : What is actual length in feet of a one-half wavelength of a coax with a velocity factor of 0.59 at 26 MHz? A. 11.16 B. 40.29 C. 42.46 D. 46.28

Last Answer : A. 11.16

Smoke volatility index is equal to smoke point plus (A) 0.42 × (% distilled at 204°C) (B) 5 mm (C) 0.84 × (% distilled at 204°C) (D) 10 mm approximately

Description : Smoke volatility index is equal to smoke point plus (A) 0.42 × (% distilled at 204°C) (B) 5 mm (C) 0.84 × (% distilled at 204°C) (D) 10 mm approximately

Last Answer : (A) 0.42 × (% distilled at 204°C)

Co-efficient of discharge (Cd ) is defined as actual discharge/theoretical discharge and is equal to Cc . Cv ; where Cc = Co-efficient of contraction and Cv = co-efficient of velocity. Cd of an orifice is usually about (A) 0.42 (B) 0.62 (C) 0.82 (D) 0.98

Description : Co-efficient of discharge (Cd ) is defined as actual discharge/theoretical discharge and is equal to Cc . Cv ; where Cc = Co-efficient of contraction and Cv = co-efficient of velocity. Cd of an orifice is usually about (A) 0.42 (B) 0.62 (C) 0.82 (D) 0.98

Last Answer : (B) 0.62

Co-efficient of discharge (Cd ) is defined as actual discharge/theoretical discharge and is equal to Cc . Cv ; where Cc = Co-efficient of contraction and Cv = co-efficient of velocity. Cd of an orifice is usually about (A) 0.42 (B) 0.62 (C) 0.82 (D) 0.98

Description : Co-efficient of discharge (Cd ) is defined as actual discharge/theoretical discharge and is equal to Cc . Cv ; where Cc = Co-efficient of contraction and Cv = co-efficient of velocity. Cd of an orifice is usually about (A) 0.42 (B) 0.62 (C) 0.82 (D) 0.98

Last Answer : (B) 0.62

The total length of a valley formed by two gradients - 3% and + 2% curve between the two tangent points to provide a rate of change of centrifugal acceleration 0.6 m/sec2 , for a design speed 100 kmph, is (A) 16.0 m (B) 42.3 m (C) 84.6 m (D) None of these

Description : The total length of a valley formed by two gradients - 3% and + 2% curve between the two tangent points to provide a rate of change of centrifugal acceleration 0.6 m/sec2 , for a design speed 100 kmph, is (A) 16.0 m (B) 42.3 m (C) 84.6 m (D) None of these

Last Answer : Answer: Option C

Interior thickness of concrete road slab for design wheel load 6300 kg and permissible flexural stress 21 kg/cm2 , is (A) 17.0 cm (B) 25.5 cm (C) 34.0 cm (D) 42.5 cm

Description : Interior thickness of concrete road slab for design wheel load 6300 kg and permissible flexural stress 21 kg/cm2 , is (A) 17.0 cm (B) 25.5 cm (C) 34.0 cm (D) 42.5 cm

Last Answer : Answer: Option B

The total value of extra widening required at a horizontal curve on a two lane hill road of radius 42 m for a design speed of 50 kmph and for vehicles with wheel base 6 m, is (A) 0.500 m (B) 0.589 m (C) 1.089 m (D) 0.089 m

Description : The total value of extra widening required at a horizontal curve on a two lane hill road of radius 42 m for a design speed of 50 kmph and for vehicles with wheel base 6 m, is (A) 0.500 m (B) 0.589 m (C) 1.089 m (D) 0.089 m

Last Answer : Answer: Option C

If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Description : If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Last Answer : Answer: Option C

The total length of a cranked bar through a distance (d) at 45° in case of a beam of effective length L, is (A) L + 0.42 d (B) L + (2 × 0.42 d) (C) L - (0.42 d) (D) L - (2 × 0.4 d)

Description : The total length of a cranked bar through a distance (d) at 45° in case of a beam of effective length L, is (A) L + 0.42 d (B) L + (2 × 0.42 d) (C) L - (0.42 d) (D) L - (2 × 0.4 d)

Last Answer : (B) L + (2 × 0.42 d)

√(4.9 − 0.49) = ? a) 10.42 b) 5.84 c) 12.84 d) 2.1 e) None of these

Description : √(4.9 − 0.49) = ? a) 10.42 b) 5.84 c) 12.84 d) 2.1 e) None of these

Last Answer : Answer: d)

A disk drive has 100 cylinders, numbered 0 to 99. Disk requests come to the disk driver for cyclinders 12, 26, 24, 4, 42, 8 and 50 in that order. The driver is currently serving a request at cyclinder 24. A seek takes 6 msec per cyclinder moved. How much seek time is needed for shortest seek time first (SSTF) algorithm? (A) 0.984 sec (B) 0.396 sec (C) 0.738 sec (D) 0.42 sec

Description : A disk drive has 100 cylinders, numbered 0 to 99. Disk requests come to the disk driver for cyclinders 12, 26, 24, 4, 42, 8 and 50 in that order. The driver is currently serving a request at cyclinder 24. A seek takes ... (SSTF) algorithm? (A) 0.984 sec (B) 0.396 sec (C) 0.738 sec (D) 0.42 sec

Last Answer : C