Why a piece of iron can be turned into magnet but not a copper piece?

Why a piece of iron can be turned into magnet but not a copper piece?
by

1 Answer

Answer :

Iron has the property of being ferromagnetic, most othermaterials don't.The difference is that in iron, groups of adjacentatoms have a tendency to form magnetic domains.
by
selected by

Related questions

When a piece of iron is rubbed with a magnet it acquires magnetism ' What kind of change is this and why ?

Description : When a piece of iron is rubbed with a magnet it acquires magnetism ' What kind of change is this and why ?

Last Answer : When a piece of iron is rubbed by a magnet, it acquires magnetism ' is a physical or positional change. This is because when rubbed by a magnet, no other substance is formed from iron. Again , when a piece of magnetized iron is heated, it loses its magnetism and is converted into ordinary iron.

When a piece of iron rod is brought near a permanent magnet for a while it becomes magnitised by?

Description : When a piece of iron rod is brought near a permanent magnet for a while it becomes magnitised by?

Last Answer : Need answer

The most suitable metal for making permanent magnet is a) Iron b) Steel c) Silver d) Copper

Description : The most suitable metal for making permanent magnet is a) Iron b) Steel c) Silver d) Copper

Last Answer : a) Iron

Rohan had learnt that non-metals on beating with hammer are generally broken into pieces. Which of the following is a non-metal? a) iron nail b)aluminium wire c)copper wire d)piece of coal

Description : Rohan had learnt that non-metals on beating with hammer are generally broken into pieces. Which of the following is a non-metal? a) iron nail b)aluminium wire c)copper wire d)piece of coal

Last Answer : d)piece of coal

When a bar magnet is cut into two equal halves, the pole strength of each piece (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Description : When a bar magnet is cut into two equal halves, the pole strength of each piece (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Last Answer : (4) remains the same Explanation: The poles remains same whether the magnet is cut into two equal half or more and also pole strength remains same but magnetic moment reduces due to decrease in the length of ... is called north pole (N-poled of the magnet and the other end the south pole (S-pole).

When a bar magnet is cut into two equal halves, the pole strength of each piece – (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Description : When a bar magnet is cut into two equal halves, the pole strength of each piece – (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Last Answer : remains the same

A rectangular magnet of magnetic moment M is cut into two piece ...

Description : A rectangular magnet of magnetic moment M is cut into two piece of same length, the magnetic moment of each piece will be

Last Answer : A rectangular magnet of magnetic moment M is cut into two piece of same length, the magnetic moment of each piece will be M/2.

Magnetic lines of force have all but one of the following characteristics. The one that they DO NOT have is: w) they go from the South-pole to the North-pole of a magnet outside of the magnet x) they are most concentrated at the poles of a magnet y) they pass through copper z) they never cross one another

Description : Magnetic lines of force have all but one of the following characteristics. The one that they DO NOT have is: w) they go from the South-pole to the North-pole of a magnet outside of the magnet ... most concentrated at the poles of a magnet y) they pass through copper z) they never cross one another

Last Answer : ANSWER: W -- THEY GO FROM THE SOUTH-POLE TO THE NORTH-POLE OF THE M AGNET 

A manufacture undertakes to supply 2000 pieces of a particular component at Rs.25 per piece. According to his estimates, even if 5% fail to pass the quality tests, then he will make a profit of 25%. However as it turned out, 50% of the components were rejected. What is the loss to the manufacture? [TCS recruitment exam question] A. Rs 12,000 B. Rs 13,000 C. Rs 14,000 D. Rs 15,000 E. None f these

Description : A manufacture undertakes to supply 2000 pieces of a particular component at Rs.25 per piece. According to his estimates, even if 5% fail to pass the quality tests, then he will make a profit of 25%. However as it turned out, ... A. Rs 12,000 B. Rs 13,000 C. Rs 14,000 D. Rs 15,000 E. None f these

Last Answer : Answer - B. Rs 13,000 Explanation: 5% of 2000=100 so 2000-100=1900 so,if he sells 1900 he will get 25% profit cost per piece rs 25 so 25x 1900 don't solve here if 125% . ... /125=38000=CP if 50% rejected,only 1000 pieces sold so 1000 25=25000=SP loss=cp-sp= 38000-25000=13000

Which energy is converted into which energy when iron is converted to magnet ?

Description : Which energy is converted into which energy when iron is converted to magnet ?

Last Answer : When iron is converted to magnet, magnetic energy is converted into heat energy.

Which magnet is used in a crane to move heavy iron beams ?

Description : Which magnet is used in a crane to move heavy iron beams ?

Last Answer : : Strong electromagnets are used in cranes to move heavy iron beams.

Which of the following iron and steel is used to make a permanent magnet ?

Description : Which of the following iron and steel is used to make a permanent magnet ?

Last Answer : Steel is used between cast iron and steel to make permanent magnets.

How can iron fillings be used to map the magnetic field of a bar magnet?

Description : How can iron fillings be used to map the magnetic field of a bar magnet?

Last Answer : What is the answer ?

What part of a magnet would pick up most iron filling?

Description : What part of a magnet would pick up most iron filling?

Last Answer : The one that the field strength is stronger

Can a magnet attract to a demagnetized iron rod?

Description : Can a magnet attract to a demagnetized iron rod?

Last Answer : Yes. In this case, the magnet will induce magnetism in the iron,which is originally unmagnetized. Once the magnet is removed, theiron may return to an unmagnetized state; unless the magnetic fieldnear the piece of iron is very strong.

If you are given some iron fillings and a magnet describe how you would find the poles of the magnet?

Description : If you are given some iron fillings and a magnet describe how you would find the poles of the magnet?

Last Answer : If possible cover the magnet with a sheet of paper and gentlysprinkle the iron filings over the sheet ot paper, they will stickin a pattern following the magnetic "lines of flux" which will ... . Without the paper thefilings will usually become tightly stuck to the magnet, making ithard to clean.

Permanent magnet is normally made of- (a) Aluminum (b) Wrought iron (c) Cast iron (d) Alnico alloys

Description : Permanent magnet is normally made of- (a) Aluminum (b) Wrought iron (c) Cast iron (d) Alnico alloys

Last Answer : Ans: C

Which of the following electric meter movements uses a stationary permanent magnet and movable coil? A. D'Arsonval B. Electrodynamometer C. Moving iron-vane D. Inclined coil iron-vane

Description : Which of the following electric meter movements uses a stationary permanent magnet and movable coil? A. D'Arsonval B. Electrodynamometer C. Moving iron-vane D. Inclined coil iron-vane

Last Answer : Answer: A

Why is magnet always made of soft iron?

Description : Why is magnet always made of soft iron?

Last Answer : Ans: Magnet is always made of soft iron because ‘magnetisation’ and ‘demagnetisation’ both are possible in soft iron.

The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields (a) meter is surrounded by strong magnetic fields (b) a soft iron shielding is used (c) a plastic shielding is provided (d) a shielding of anon-magnetic material is used

Description : The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields (a) meter is surrounded by strong magnetic fields (b) a soft ... is used (c) a plastic shielding is provided (d) a shielding of anon-magnetic material is used

Last Answer : (b) a soft iron shielding is used

The most effective and quickest may of making a magnet from soft iron is by

Last Answer : The most effective and quickest may of making a magnet from soft iron is by placing it inside a coil carrying current.

`1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Description : `1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Last Answer : `1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Ten coulombs of positive charge are placed on an irregularly-shaped, solid piece of copper. Once the charge has stopped moving, the electric field inside the copper is: w) zero x) changes as one over the radius squared y) becomes smaller as you approach the center z) becomes larger as you approach the center

Description : Ten coulombs of positive charge are placed on an irregularly-shaped, solid piece of copper. Once the charge has stopped moving, the electric field inside the copper is: w) zero x) changes as one ... squared y) becomes smaller as you approach the center z) becomes larger as you approach the center

Last Answer : ANSWER: W -- ZERO

A COPPER strip is placed in one compartment of a voltaic cell and a wire connects this strip to a piece of metal in the other compartment through a voltmeter. If the voltmeter reads zero, the other piece of metal is: w) zinc x) mercury y) silver z) copper

Description : A COPPER strip is placed in one compartment of a voltaic cell and a wire connects this strip to a piece of metal in the other compartment through a voltmeter. If the voltmeter reads zero, the other piece of metal is: w) zinc x) mercury y) silver z) copper

Last Answer : ANSWER: Z -- COPPER

By inserting a soft iron piece into solenoid, what does the strength of the magnetic field?

Description : By inserting a soft iron piece into solenoid, what does the strength of the magnetic field?

Last Answer : Increase

A bucket of water is hanging from a spring balance. An iron piece is suspended into water without touching sides of bucket from another support. The spring balance reading will (A) Increase (B) Decrease (C) Remain same (D) Increase/decrease depending on depth of immersion

Description : A bucket of water is hanging from a spring balance. An iron piece is suspended into water without touching sides of bucket from another support. The spring balance reading will (A) Increase (B) Decrease (C) Remain same (D) Increase/decrease depending on depth of immersion

Last Answer : Answer: Option C

What piece of equipment would iron and other metallic objects use to separate?

Description : What piece of equipment would iron and other metallic objects use to separate?

Last Answer : A magnet.

How A 500 g piece of iron changes 7 C when heat is added. How much heat energy in joules is produced due to this change in temperature?

Description : How A 500 g piece of iron changes 7 C when heat is added. How much heat energy in joules is produced due to this change in temperature?

Last Answer : Need answer

What can you do to align all of the domains in a piece of iron?

Description : What can you do to align all of the domains in a piece of iron?

Last Answer : Need answer

What does it mean to season a piece of iron cookware?

Description : What does it mean to season a piece of iron cookware?

Last Answer : Iron cookware has been around for a long time and therefore is obviously something very useful, even with today's "modern" cookware. Iron cookware needs to be seasoned by coating it in some type of cooking oil and baking it in the oven - thus giving it a finished coating by baking it on.

I bent a piece of my new wrought iron patio furniture set, is there an easy fix to this?

Description : I bent a piece of my new wrought iron patio furniture set, is there an easy fix to this?

Last Answer : Unfortunately, you will indeed have to contact the manufacturer to get the part replaced. If you have a warranty, you'll be in luck as it will be replaced for free.

Which of the following has the maximum specific heat capacity? (1) water (2) piece of iron (3) piece of gold (4) chloroform

Description : Which of the following has the maximum specific heat capacity? (1) water (2) piece of iron (3) piece of gold (4) chloroform

Last Answer : (1) water Explanation: The quantity of heat required to raise the temperature of a substance by one degree Celsius is called its specific heat capacity.

Which of the following has got more heat capacity? (1) Iron piece (2) Water (3) Gold piece (4) Benzene

Description : Which of the following has got more heat capacity? (1) Iron piece (2) Water (3) Gold piece (4) Benzene

Last Answer : (2) Water Explanation: Heat capacity (usually denoted by a capital C, often with subscripts), or thermal capacity, is the measurable physical quantity that characterizes the amount of heat required to change a substance's ... (SI), heat capacity is expressed in units of joule(s) (J) per Kelvin (K).

What happens when a iron nail or a piece of aluminium wire is dipped in concentrated nitric acid?

Description : What happens when a iron nail or a piece of aluminium wire is dipped in concentrated nitric acid?

Last Answer : Iron nail or aluminium wire does not react with concentrated nitric acid. It makes iron more passive.

When an iron piece is placed in a magnetic field (a) the magnetic lines of force will bend away from their usual paths in order to go away from the piece (b) the magnetic lines of force will bend away from their usual paths in order to pass through the piece (c) the magnetic field will not be affected (d) the iron piece will break

Description : When an iron piece is placed in a magnetic field (a) the magnetic lines of force will bend away from their usual paths in order to go away from the piece (b) the magnetic lines of force will bend ... to pass through the piece (c) the magnetic field will not be affected (d) the iron piece will break

Last Answer : (b) the magnetic lines of force will bend away from their usual paths in order to pass through the piece

A substance which reacts with oxygen giving heat is called a combustible substance. Which one of the following is a combustible substance? a) iron nail b)glass c)stone piece d)wood

Description : A substance which reacts with oxygen giving heat is called a combustible substance. Which one of the following is a combustible substance? a) iron nail b)glass c)stone piece d)wood

Last Answer : d)wood

Which of the following has got more heat capacity ? (1) Iron piece (2) Water (3) Gold piece(4) Benzene

Description : Which of the following has got more heat capacity ? (1) Iron piece (2) Water (3) Gold piece(4) Benzene

Last Answer : Water

When an iron piece is placed in a magnetic field

Last Answer :  When an iron piece is placed in a magnetic field the magnetic lines of force will bend away from their usual paths in order to pass through the piece.

________ does not react with dilute hydrochloric acid but reacts with sulphuric acid and does not liberate hydrogen gas. a) iron b)copper c)gold d)zinc

Description : ________ does not react with dilute hydrochloric acid but reacts with sulphuric acid and does not liberate hydrogen gas. a) iron b)copper c)gold d)zinc

Last Answer : b)copper

Why is steel attracted to a magnet but not brass?

Description : Why is steel attracted to a magnet but not brass?

Last Answer : Feel Free to Answer

An iron nail is placed into some blue copper sulphate solution. A reaction takes place between the iron and the copper sulphate.?

Description : An iron nail is placed into some blue copper sulphate solution. A reaction takes place between the iron and the copper sulphate.?

Last Answer : Hdhdhrh

The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Description : The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Last Answer : (A) Lead

The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Description : The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Last Answer : Option A

If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Last Answer : The answer is '6'

If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Last Answer : answer:

If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Last Answer : answer:

Which energy is converted into an energy magnet by which energy ?

Description : Which energy is converted into an energy magnet by which energy ?

Last Answer : Electromagnets convert electrical energy into magnetic energy.

What turns the particles in the flex mag sheet into a magnet?

Description : What turns the particles in the flex mag sheet into a magnet?

Last Answer : Every substance is made up of tiny units called atoms. Each atom has electrons, particles that carry electric charges. Spinning like tops, the electrons circle the nucleus, or core, of an atom. Their movement generates an electric current and causes each electron to act like a microscopic magnet.

If a bar magnet is cut length wise into 3 parts, what will the total number of poles be?

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be?

Last Answer : 6

Induced current in coil by a magnet turns it into an A. straight wire B. magnet C. ammeter D. electromagnet

Description : Induced current in coil by a magnet turns it into an A. straight wire B. magnet C. ammeter D. electromagnet

Last Answer : electromagnet