Define the term standards ,state the type of standard.

Define the term standards ,state the type of standard. 
by

1 Answer

Answer :

Standards:-Standard is a physical representation of a unit of measurement. A known accurate measure of physical quantity is termed as standard. These standards are used to determine the values of other physical quantities by comparison method.

Classifications:-

1) International standards:

International standards are fixed and develop by international agreement.

These standards are maintained at International Bureau of Weights and Measures in France.

This standard gives different unit having best accuracy.

To preserve best accuracy these standards are periodically check by absolute measurement.

These standards are used to calibrate primary standard only.

These are not available to ordinary user for measurement.

2) Primary standards

These standards are preserved and maintained by National Standard Laboratories which are located at different part of the world.

e.g.-NBS (National Bureau of Standards) located at Washington.

These standards are periodically calibrated by International standards. 

3) Secondary standards

These standards are also called as basic standards.

These standards are used by industries and calibration laboratories.

Each industry has its own laboratory.

4) Working standards

These standards are used in general laboratories.

These standards are used to check components and calibrating laboratory instruments to achieve good accuracy and better performance.

 
by

Related questions

Define standards. State and explain classification of standards.

Description : Define standards. State and explain classification of standards.

Last Answer : Standards:-Standard is a physical representation of a unit of measurement. A known accurate measure of physical quantity is termed as standard. These standards are used to determine ... used to check components and calibrating laboratory instruments to achieve good accuracy and better performance.

Define the term ‘Measurement’.

Description : Define the term ‘Measurement’.

Last Answer : Measurement is the result or act of a quantitative comparison between a predetermined standard and an unknown magnitude. Or Measurement is the result of an opinion formed by one or more observers about the relative size or intensity of some physical quantity.

Define wave analyser and state its need, Draw the block diagram of it.

Description : Define wave analyser and state its need, Draw the block diagram of it. 

Last Answer : Wave analyzer:- Wave analyzer is an instrument which is used to measure the magnitude of the various harmonics of a complex waveform. It is an instrument that is designed to measure the relative amplitudes ... distortion and the system signal to noise ratio. Block Diagram of Wave analyser

Define signal generator and state its need.

Description : Define signal generator and state its need.

Last Answer : Signal Generator: A signal generator is an electronic device that generates repeating or Non-repeating electronic signals in either the analog or the digital domain. Need: The generation of ... of various electronic systems and for replacing missing signals in systems being analysed for repair. 

Define the following: 1) Speed of response 2) Lag 3) Fidelity 4) Dynamic Error.

Description : Define the following: 1) Speed of response 2) Lag 3) Fidelity 4) Dynamic Error. 

Last Answer : (1) Speed of Response: It is the rapidity with which an instrument responds to changes in the measured quantity.  (2) Lag : It is the retardation or delay in the response of an instrument ... with time and value indicated by instrument if no static error is assumed is called as dynamic error.

Define: i)Accuracy ii)Precision

Description : Define: i)Accuracy ii)Precision

Last Answer : Accuracy: The degree of closeness with which an instrument approaches the true value of the quantity being measured is known as accuracy.  Precision:The measure of the degree to which successive measurements differ from each other is known as precision 

Define Lissajous pattern. Explain how Lissajous pattern is useful for frequency and phase measurement.

Description : Define Lissajous pattern. Explain how Lissajous pattern is useful for frequency and phase measurement.

Last Answer : Lissajous Pattern : The CRO is set to operate in the X- Y mode, when two sine waves of the same frequency are applied to the CRO (One vertical and one horizontal deflection plates) then the display obtained on ... 1. Lissajous pattern for ratio 3:1    2. Lissajous pattern for ratio 3:2  

List four dynamic characteristics of instruments. Define any two of them.

Description : List four dynamic characteristics of instruments. Define any two of them.

Last Answer : Dynamic characteristics of instruments are: 1. Speed of response 2. Fidelity 3. Lag 4. Dynamic error. Definition: 1. Speed of response: The rapidity with which instrument responds to make ... and the value indicated by the instrument if no static error is assumed is called as dynamic error.

Define calibration of instruments. Explain why calibration is needed for measuring instruments.

Description : Define calibration of instruments. Explain why calibration is needed for measuring instruments.

Last Answer : Calibration - It is a process of estimating the value of a quantity by comparing that quantity with a standard quantity. Need of calibration: - Calibration defines the accuracy and quality ... aim of calibration is to minimize any measurement uncertainty by ensuring the accuracy of test equipment.

Define: (i) Accuracy (ii) Sensitivity

Description : Define: (i) Accuracy  (ii) Sensitivity

Last Answer : (i) Accuracy: It is the degree of closeness with which an instrument reading approaches the true value of the quantity being measured. (ii) Sensitivity: The ratio of change in output of an instrument to the change in input is known as sensitivity.  Sensitivity = Change in output/ Change in input

Define: (i) Absolute Instrument (ii) Secondary Instrument

Description : Define: (i) Absolute Instrument (ii) Secondary Instrument 

Last Answer : i)Absolute Instrument:An instrument whose calibration can be determined by means of physical measurements on the instrument.  ii)Secondary Instrument:Secondary instruments are those, in which the ... instruments, only when they have been pre-calibrated by comparison with an absolute instrument.

Define signal conditioning system.

Description : Define signal conditioning system.

Last Answer : Signal conditioning is the manipulation of a signal in a way that prepares it for the next stage of processing. Many applications involve environmental or structural measurement, such as temperature and vibration, from sensors.

Define any two dynamic characteristics of measurements.

Description : Define any two dynamic characteristics of measurements.

Last Answer : 1. Speed of response: The rapidity with which instrument responds to make changes in the measured quantity is called as speed of response. 2. Fidelity: The degree to which instrument indicates the ... the value indicated by the instrument if no static error is assumed is called as dynamic error.

Define : (i) Sensor (ii) Transducer

Description : Define : (i) Sensor (ii) Transducer

Last Answer : (i) Sensor : A device which detects or measures a physical property and records, indicates, or otherwise responds to it. (ii) Transducer : a device that converts variations in a physical quantity, such as pressure or brightness, into an electrical signal, or vice versa.

Define : (i) Resolution (ii) Accuracy

Description : Define : (i) Resolution (ii) Accuracy

Last Answer : (i) Resolution: The smallest change in input to which instrument can respond is known as resolution. (ii) Accuracy: It is the degree of closeness with which an instrument reading approaches the true value of the quantity being measured. 

Define : (i) Laminar flow (ii) Turbulent flow

Description : Define : (i) Laminar flow (ii) Turbulent flow

Last Answer : Laminar flow: - 1. Laminar flow occurs when the fluid flows in infinitesimal parallel layers with no disruption between them. For laminar flow Reynolds number Re < 2300 OR 2. The flow in which ... such a way that its velocity changes irregularly, such type of flow is known as turbulent flow. 

Define transducer. Give two examples of transducer.

Description : Define transducer. Give two examples of transducer.

Last Answer : It is a device which convert any form of physical energy in to electrical energy. Two examples of transducer (1) Strain gauge (2) Thermistor (3) Thermocouple (4) LVDT

Draw and state how Aryton shunt type DC ammeter . State advantage of using Aryton shunt.

Description : Draw and state how Aryton shunt type DC ammeter . State advantage of using Aryton shunt.

Last Answer : OR The Aryton shunt eliminates the possibility of having the meter in the circuit without a shunt. This advantage is gained at the price of slightly higher overall Aryton shunt ammeter. In this ... between shunts. 3. Another advantage is that it may be used as a wide range ammeter. 

Explain the calibration of series type ohmmeter.

Description : Explain the calibration of series type ohmmeter.

Last Answer : Series Ohmmeter If the resistor's value is unknown and has to be measured by placing it in series with the ohmmeter, then that ohmmeter is called series ohmmeter. The circuit diagram of ... hand of the scale respectively. Series ohmmeter is useful for measuring high values of resistances.

Draw block diagram of DMM. State its advantages.

Description : Draw block diagram of DMM. State its advantages.

Last Answer : Advantages of DMM: 1. DMM provides numerical readouts that eliminate observational errors. Thus providing better readability. 2. DMM offers better accuracy and versatility as compared to ... memory devices for further computations. 5. The decreased size of DMM increases the portability

Draw block diagram of spectrum analyser, State applications of spectrum analyser.

Description : Draw block diagram of spectrum analyser, State applications of spectrum analyser.

Last Answer : Block Diagram: Applications: 1. Spectrum analyzer is a very important item of test equipment for someone designing or repairing electronic equipment that uses radio frequency signals. 2. Its ... of the dominant frequency within a signal 8. Used to measure the properties of RF devices

State and describe different triggering available in CRO

Description : State and describe different triggering available in CRO

Last Answer : A trigger is an external signal or input signal condition that initiates one or more instrument functions. Trigger settings include digital edges, software functions, and analog levels. This tutorial ... the external trigger input. The following figure shows an entering window trigger.  

Draw block diagram of DSO . State applications of DSO

Description : Draw block diagram of DSO . State applications of DSO

Last Answer : Applications of DSO : 1. It can be used to measure both AC and DC voltages and currents. It can also calculate RMS value, peak value, peak to peak value etc. 2. It ... . 5. It can be used to determine the modulation characteristics and detect the standing waves of transmission lines.

What is video pattern generator? State its application.

Description : What is video pattern generator? State its application.

Last Answer : A pattern generator provides video signals directly, and with RF modulation, on standard TV channels for alignment ,testing and servicing of TV receivers. The output signal designed to produce simple ... section checking 6. Trouble shooting video amplifier and using variable video output.

State two uses of logic analyser.

Description : State two uses of logic analyser. 

Last Answer : 1. Real time application 2. Troubleshooting and analysis of digital systems 3. Compatible with printer using RS 232 and IEEE 488 interface 4. Testing the IC s to detect defect before constructed. ... Industries. 7. In various software industries. 8. To find fault in Bio- medical instruments. 

State the difference between CRO and DSO.

Description : State the difference between CRO and DSO.

Last Answer : CRO DSO Direcly reads analog voltage and displays it on screen. It reads the analog voltage and converts it into digital form before being displayed on the screen. ... DSP algorithms available and ported on microprocessor which can operate on stored samples of input voltage. 

State the advantages of Digital instrument.

Description : State the advantages of Digital instrument.

Last Answer : 1. They are having high input impedance, so there is no loading effect 2. They are having higher accuracy 3. An unambiguous reading is obtained 4. The output can be interfaced with external equipment 5. They are available in smaller size

State applications of digital frequency meter.

Description : State applications of digital frequency meter.

Last Answer : 1. For testing radio equipment 2. Measuring the temperature, pressure, and other physical values. 3. Measuring vibration, strain 4. Measuring transducers

Draw block diagram of successive approximation digital voltmeter. State its two advantages and two disadvantages

Description : Draw block diagram of successive approximation digital voltmeter. State its two advantages and two disadvantages

Last Answer : Block diagram Or Advantages: o It is economical method of analog to digital conversion. o The resolution is up to 5 important digits are obtained. Disadvantages: o ... depends on which type of switches are used. o The conversion time required for digital to analog converter.

Draw block diagram of frequency meter and state it’s principle of operation

Description : Draw block diagram of frequency meter and state it’s principle of operation

Last Answer : Block diagram Principle  The signal may be amplified before being applied to the Schmitt trigger. The Schmitt trigger converts the input signal into a square wave with fast rise and fall times, ... time interval between start and stop gate then, frequency of unknown signalis, f = N / t

State significance of ½ digit with an example

Description : State significance of ½ digit with an example

Last Answer : The number of digit position in a digital meter determine the resolution. ½ digit has a maximum value of 1 and has 2 possible conditions (0 or 1). Hence 3 digit display on a DVM for a 0 -1 ... above 999 up to 1999, to give overlap between ranges for convenience, a process called over ranging. 

Draw the diagram of PMMC instrument and state the deflection torque equation

Description : Draw the diagram of PMMC instrument and state the deflection torque equation

Last Answer : Equation Ʈ= B*A*I*N Where r= torque Newton. Meter B = flux density in the air gap. Wb/m2 A = effective coil area (m) N= number of turns of wire of the coil

Sketch block diagram of single trace CRO. State function of delay line.

Description : Sketch block diagram of single trace CRO. State function of delay line.

Last Answer : Function of Delay line: This block is used to delay the signal for a period of time in the vertical section of CRT. The input signal is not applied directly to the vertical plates because the part ... when the delay time is not used. Therefore, the input signal is delayed by a period of time.

State any four precautions to be taken while using an Ammeter and Voltmeter.

Description : State any four precautions to be taken while using an Ammeter and Voltmeter. 

Last Answer : Precautions to be taken while using Ammeters: Ammeters are to be connected in series of circuits. 1. While connecting ammeters across emf source always a series resistance should be used. This ... first &then range should be decreased. 4. Loading effect can be minimized by using high sensitivity

State any four applications of spectrum analyzer.

Description : State any four applications of spectrum analyzer.

Last Answer : Applications: 1. Spectrum analyzer is a very important item of test equipment for someone designing or repairing electronic equipment that uses radio frequency signals. 2. Its key factor is that it is ... of the dominant frequency within a signal 8. Used to measure the properties of RF devices

State any four specifications of digital voltmeter.

Description : State any four specifications of digital voltmeter. 

Last Answer : DC Voltage – 1 Five voltage ranges from ±200 to ±1000 2 Accuracy is about ±0.03% 3 Resolution is about 10µV AC Voltage1. Five voltage range available for 200mV to 750V 2. Accuracy is dependent on frequency. Best accuracy obtained is 0.5%

State need of delay line in CRO.

Description : State need of delay line in CRO. 

Last Answer : The delay line is used in CRO to delay the signal for some time in thevertical sections. As horizontal channel consists of trigger circuit andtime based generator. This causes more time to reach ... vertical plates. For synchronization of reachinginput signal at same time to both the plates in CRT. 

State different types of errors in Instruments.

Description : State different types of errors in Instruments.

Last Answer : There are three types of error 1) Gross Error: These errors are mainly human mistakes in reading instruments and recording and calculating measurement results. 2) Systematic Error : These types of ... operator 3) Random Error.:These errors are due to unknown causes which are not determinable.

State the meaning of PT-100.

Description : State the meaning of PT-100.

Last Answer : Pt-100:- A platinum resistance temperature detector (RTD) Pt100 is a device with a typical resistance of 100 Ω at 0°C (it is called Pt100). It changes resistance value as its temperature changes following a positive slope (resistance increases when temperature is increasing). 

Compare CRO and DSO. State the formula for phase measurement using CRO with necessary diagram.

Description : Compare CRO and DSO. State the formula for phase measurement using CRO with necessary diagram.

Last Answer : CRO DSO Directly reads analog voltage and displays it on screen. It reads the analog voltage and converts it into digital form before being displayed on the screen. ... algorithms available and ported on microprocessor which can operate on stored samples of input voltage.

State need of level measurement.

Description : State need of level measurement.

Last Answer : In almost all industries, vast quantities of liquid such as water solvents, chemicals etc. are used in number of processes. It is widely employed to monitor as well as measure ... and therefore its measurement becomes important in a variety of processes encountered in modern manufacturing plants.

Explain Piezo-electric transducer with diagram. State its applications, advantages and disadvantages.

Description : Explain Piezo-electric transducer with diagram. State its applications, advantages and disadvantages.

Last Answer : Explanation: Principle of operation: When a pressure or force or vibration applied to the crystalline material like quartz crystal or crystalline substances then an e.m.f. is generated across the ... destructive test (NDT) equipment's 4) Piezoelectric materials are use in ultrasonic transducers.

Draw the sketch of electromagnetic flow meter and explain it. State advantages, disadvantages and applications of it.

Description : Draw the sketch of electromagnetic flow meter and explain it. State advantages, disadvantages and applications of it.

Last Answer : Diagram:  Explanation: Electromagnetic flow meters works based on Faraday's Law of Electromagnetic Induction. According to this principle, when a conductive medium passes through a magnetic ... water, chilled water. Used for flow measurement of Corrosive liquids, slurries and pastes.

State significance of Lissajous figure.

Description : State significance of Lissajous figure. 

Last Answer : Significance of Lissajous figure. The characteristics patterns that appear on the screen of a cathode ray tube, when sinusoidal voltages are simultaneously applied to horizontal and vertical plates .these ... is presented as a Lissajous figure. it is used for measurement of phase and frequency.

Draw block diagram of digital frequency meter in time mode and describe its operation.

Description : Draw block diagram of digital frequency meter in time mode and describe its operation.

Last Answer : OR Operation: The input signal is amplified and converted to a square wave by a Schmitt Trigger circuit. In this diagram the square wave is differentiated and clipped to ... thereby closing it. The decimal counter and display unit output correspond to the number of input pulses. 

What is LCR meter? Draw digital LCR –Q meter block diagram.

Description : What is LCR meter? Draw digital LCR –Q meter block diagram.

Last Answer : An LCR meter is a type of electronic test equipment used to measure the inductance (L), capacitance (C), and resistance (R) of an electronic component. Block diagram digital LCR –Q meter  

Draw Q meter circuit of series connection and explain it.

Description : Draw Q meter circuit of series connection and explain it.

Last Answer : Q meter circuit of series connection OR Explanation The Q meter works on series resonant. The resonance is the condition exists in the circuit when their inductance and capacitance reactance are ... . Hence E=Q Ec so ,the voltmeter is calibrated for finding the value of Q factor.  

Draw block diagram of distortion factor meter and explain its operation.

Description : Draw block diagram of distortion factor meter and explain its operation.

Last Answer : Block Diagram Operation This meter consist following four sections 1. Impedance converter along with input circuit 2. Rejection amplifier 3. Metering circuit 4. Power circuit 1. ... of the total input voltage. 4. The power supply unit provides the supply for proper operation 

Draw block diagram of RF signal generator and explain its operation.

Description : Draw block diagram of RF signal generator and explain its operation.

Last Answer : RF signal generator contains three other main sections: 1.OSCILLATOR CIRCUIT, 2. MODULATOR, 3. OUTPUT CONTROL CIRCUIT. The modulator modulates the RF signal of the ... . Metal shielding surrounds the unit to prevent signals from the oscillator from affecting the circuit under test

Explain sensitivity and loading effect in voltmeter.

Description : Explain sensitivity and loading effect in voltmeter.

Last Answer : Sensitivity: The sensitivity of a voltmeter is just its capability to detect voltage, usually meaning smaller and smaller voltages. When selecting a meter for a certain voltage measurement, it is ... called loading effect of the voltmeters. It is mainly caused due to low sensitivity instruments.