How is heat transferred from the surface of a block of ice to its center?

How is heat transferred from the surface of a block of ice to its center?
by

1 Answer

Answer :

Need answer
by
selected by

Related questions

When does the heat generated by fluid friction becomes appreciable compared to the heat transferred between the fluids? (A) At high fluid velocity (B) At low velocity (C) When fluid flows past a smooth surface (D) None of these

Description : When does the heat generated by fluid friction becomes appreciable compared to the heat transferred between the fluids? (A) At high fluid velocity (B) At low velocity (C) When fluid flows past a smooth surface (D) None of these

Last Answer : (A) At high fluid velocity

Extended heat transfer surface like fins are used to increase the heat transfer rate. Fin efficiency is defined as the ratio of heat transferred across the fin surface to the theoretical heat transfer across an equal area held at the (A) Surrounding temperature (B) Average temperature of the fin (C) Temperature of the fin end (D) Constant temperature equal to that of the base

Description : Extended heat transfer surface like fins are used to increase the heat transfer rate. Fin efficiency is defined as the ratio of heat transferred across the fin surface to the theoretical heat transfer ... (C) Temperature of the fin end (D) Constant temperature equal to that of the base

Last Answer : (D) Constant temperature equal to that of the base

The Sun. Center, Surface Heat How much ?

Last Answer : of the sun Center, Surface Heat 150,000,000 _ _ _ _, 6000 Celsius.

Increasing carbon dioxide will cause sea ice to reduce in spatial coverage. In turn, the reduced sea ice extent is a (a) Positive feedback on surface temperature because it has a greater albedo than ocean (b) Positive feedback on surface temperature because it has a lower albedo than ocean (c) Positive feedback on surface temperature because sea ice has lower heat ca- pacity than ocean (d) Both B and C are true

Description : Increasing carbon dioxide will cause sea ice to reduce in spatial coverage. In turn, the reduced sea ice extent is a (a) Positive feedback on surface temperature because it has a greater albedo than ocean ( ... because sea ice has lower heat ca- pacity than ocean (d) Both B and C are true

Last Answer :  Positive feedback on surface temperature because it has a greater albedo than ocean

When a wave is reflected from a surface, energy is transferred. When is the transfer of energy greatest?

Description : When a wave is reflected from a surface, energy is transferred. When is the transfer of energy greatest?

Last Answer : When the incident wave is nearly parallel with the surface.

How much “current” is actually being transferred from the Earth's surface via the wire to a grounding product?

Description : How much “current” is actually being transferred from the Earth's surface via the wire to a grounding product?

Last Answer : There is no A. There is no constant measurable current flow beyo constant measurable current flow beyond the equaliza nd the equalization charge that is instantly tion charge that is instantly ... all extremely difficult, if not impossible, to extremely difficult, if not impossible, to measure.

What makes heat transferred in all directions? -Physics

Description : What makes heat transferred in all directions? -Physics

Last Answer : Heat can spread out in all directions. There are three main ways for heat to travel:Radiation: All wavelengths of electromagnetic waves, including light, carry energy. When the electromagnetic waves strike an object, ... . For this reason, "heat" and "hot air" tend to be confused with each other.

An electric drill transfer some energy wastefully . aside from heat , what else carries the energy that is transferred wastefully?

Description : An electric drill transfer some energy wastefully . aside from heat , what else carries the energy that is transferred wastefully?

Last Answer : sound waves

In order for heat to be transferred by conduction, which of the following must occur?

Description : In order for heat to be transferred by conduction, which of the following must occur?

Last Answer : A hot object must go throught the cold object

When you touch the hot sand heat is transferred by?

Description : When you touch the hot sand heat is transferred by?

Last Answer : Conduction

What is the main way heat is transferred through the air from the fire to the fire fighter?

Description : What is the main way heat is transferred through the air from the fire to the fire fighter?

Last Answer : Feel Free to Answer

How can heat be transferred across space?

Description : How can heat be transferred across space?

Last Answer : Light energy, like from the sun.

Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation (B) Film co-efficient for vaporisation decreases as a result of vapor binding (C) In industrial practice, sub-cooling of condensate is required, when thecondensate is a volatile liquid and is to be transferred for storage(D) Overall heat transfer co-efficient in a heat exchanger is controlled by thevalue of the film co-efficient, which is higher

Description : Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation ( ... in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Last Answer : (D) Overall heat transfer co-efficient in a heat exchanger is controlled by the value of the film co-efficient, which is higher

In regenerative air preheater (as practised in heating of coke ovens), the heat is transferred (A) Through a metallic wall (B) By direct contact of hot flue gas with air (C) By heating an intermediate material (like chequor bricks) and then heating the air from this hot material (D) None of these

Description : In regenerative air preheater (as practised in heating of coke ovens), the heat is transferred (A) Through a metallic wall (B) By direct contact of hot flue gas with air (C) By ... material (like chequor bricks) and then heating the air from this hot material (D) None of these

Last Answer : (C) By heating an intermediate material (like chequor bricks) and then heating the air from this hot material

Convective heat transfer, in which heat is transferred by movement of warmed matter is described by (A) Fourier's law (B) Newton's law of cooling (C) Fick's law (D) None of these

Description : Convective heat transfer, in which heat is transferred by movement of warmed matter is described by (A) Fourier's law (B) Newton's law of cooling (C) Fick's law (D) None of these

Last Answer : (B) Newton's law of cooling

In pipe flow, heat is transferred from hot wall to the liquid by(A) Conduction only (B) Forced convection only (C) Forced convection and conduction (D) Free and forced convection

Description : In pipe flow, heat is transferred from hot wall to the liquid by(A) Conduction only (B) Forced convection only (C) Forced convection and conduction (D) Free and forced convection

Last Answer : (C) Forced convection and conduction

In salt bath furnace, heat is transferred to the charge mainly by (A) Conduction (B) Convection (C) Radiation (D) None of these

Description : In salt bath furnace, heat is transferred to the charge mainly by (A) Conduction (B) Convection (C) Radiation (D) None of these

Last Answer : (A) Conduction

The product of efficiency & heat transferred to the working fluid is? a. Net temperature change b. Net work done c. Net enthalpy change d. None of the mentioned

Description : The product of efficiency & heat transferred to the working fluid is? a. Net temperature change b. Net work done c. Net enthalpy change d. None of the mentioned

Last Answer : b. Net work done

The generated heat is transferred to water to make ______ the process of boiling. • Steam • Boiler • Both • None

Description : The generated heat is transferred to water to make ______ the process of boiling. • Steam • Boiler • Both • None

Last Answer : • Steam

The theory that heat consisted of a fluid, which could be transferred from one body to another, but not “created” or “destroyed”.  a. Clausius Theorem  b. Caloric Theory  c. Joules Law  d. Newton’s Law of cooling

Description : The theory that heat consisted of a fluid, which could be transferred from one body to another, but not “created” or “destroyed”.  a. Clausius Theorem  b. Caloric Theory  c. Joules Law  d. Newton’s Law of cooling

Last Answer : Caloric Theory

Ten cu. ft of air at 300psia and 400°F is cooled to 140°F at constant volume. What is the transferred heat?  a.-120Btu  b. -220Btu  c.-320Btu  d. -420Btu formula: Q= mcv(T2-T1)

Description : Ten cu. ft of air at 300psia and 400°F is cooled to 140°F at constant volume. What is the transferred heat?  a.-120Btu  b. -220Btu  c.-320Btu  d. -420Btu formula: Q= mcv(T2-T1)

Last Answer : -420Btu

A process by which heat is transferred through a material without a bulk movement of the material.  a. Convection  b. Conduction  c. Radiation  d. Emission

Description : A process by which heat is transferred through a material without a bulk movement of the material.  a. Convection  b. Conduction  c. Radiation  d. Emission

Last Answer : Conduction

The flow of a fluid when heat is transferred by convection.  a. placidity  b. mass flow  c. convection current  d. heat transfer

Description : The flow of a fluid when heat is transferred by convection.  a. placidity  b. mass flow  c. convection current  d. heat transfer

Last Answer : convection current

A process in which heat energy is transferred by the flow of fluid.  a. Convection  b. Conduction  c. Radiation  d. Sublimation

Description : A process in which heat energy is transferred by the flow of fluid.  a. Convection  b. Conduction  c. Radiation  d. Sublimation

Last Answer : Convection

Entropy is transferred by ______.  A. Work  B. Heat  C. Energy  D. Work and heat

Description : Entropy is transferred by ______.  A. Work  B. Heat  C. Energy  D. Work and heat

Last Answer : Heat

How is heat transferred?  A. By conduction  B. By convection  C. By radiation  D. All of the above

Description : How is heat transferred?  A. By conduction  B. By convection  C. By radiation  D. All of the above

Last Answer : All of the above

If there is no heat transferred during the process, it is called a ______ process.  A. Static  B. Isobaric  C. Polytropic  D. Adiabatic

Description : If there is no heat transferred during the process, it is called a ______ process.  A. Static  B. Isobaric  C. Polytropic  D. Adiabatic

Last Answer : Adiabatic

What is an energy that can be transferred from one object to another causing a change in temperature of each object?  A. Power  B. Heat transfer  C. Heat  D. Work

Description : What is an energy that can be transferred from one object to another causing a change in temperature of each object?  A. Power  B. Heat transfer  C. Heat  D. Work

Last Answer : Heat

In a Carnot cycle, heat is transferred at  (a) constant pressure  (b) constant volume  (c) constant temperature  (d) constant enthaply  (e) any one of the above.

Description : In a Carnot cycle, heat is transferred at  (a) constant pressure  (b) constant volume  (c) constant temperature  (d) constant enthaply  (e) any one of the above.

Last Answer : Answer : c

Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Description : Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Last Answer : Answer : c

Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Description : Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Last Answer : Answer : a

According to first law of thermodynamics  (a) work done by a system is equal to heat transferred by the system  (b) total internal energy of a system during a process remains constant  (c) internal energy, enthalpy and entropy during a process remain constant  (d) total energy of a system remains constant

Description : According to first law of thermodynamics  (a) work done by a system is equal to heat transferred by the system  (b) total internal energy of a system during a process remains constant  ( ... , enthalpy and entropy during a process remain constant  (d) total energy of a system remains constant

Last Answer : Answer : d

Explain how heat is transferred from the source of the article.

Description : Explain how heat is transferred from the source of the article.

Last Answer : Heat is Transferred from the source of the article by following Methods: 1. Conduction: The heat transfer takes place by transmission of momentum of individual molecule. Ex. Heat transfer in solid and ... liquid. 3. Radiation: Energy transfer takes place through space i.e without using any medium.

In EXTRA-TERRESTRIAL SPACE, heat is transferred by: w) conduction x) convection y) conduction and convention z) radiation

Description : In EXTRA-TERRESTRIAL SPACE, heat is transferred by: w) conduction x) convection y) conduction and convention z) radiation

Last Answer : ANSWER: Z -- RADIATION

Heat is transferred from the sun to the earth primarily by: w) conduction x) convection y) radiation z) condensation

Description : Heat is transferred from the sun to the earth primarily by: w) conduction x) convection y) radiation z) condensation 

Last Answer : ANSWER: Y -- RADIATION

The ice sheet that covered northeastern United States came from which of the following locations? w) Labrador center in eastern Canada x) Keewatin center in central Canada y) Cordilleran center in the Rocky Mountains z) Greenland

Description : The ice sheet that covered northeastern United States came from which of the following locations? w) Labrador center in eastern Canada x) Keewatin center in central Canada y) Cordilleran center in the Rocky Mountains z) Greenland

Last Answer : ANSWER: W -- LABRADOR CENTER IN EASTERN CANADA

Is a block of ice in an air conditioning unit 'normal'?

Description : Is a block of ice in an air conditioning unit 'normal'?

Last Answer : One cause of that in an AC unit is that there isn't enough freon (or what passes for freon these days - I guess it should just be called coolant) in the system. When our AC developed a tiny leak ... , that is what ours did. We had to replace the bit with the leak, and have the coolant replaced.

What kind of figurative language is his heart was a block of ice?

Description : What kind of figurative language is his heart was a block of ice?

Last Answer : Metaphor

What kind of figurative language is his heart was a block of ice?

Description : What kind of figurative language is his heart was a block of ice?

Last Answer : Metaphor

An ice block with a piece of lead embedded in it floats in water. If ice melts the water level – (1) Rises (2) Falls (3) Remains same (4) Falls first and them rises

Description : An ice block with a piece of lead embedded in it floats in water. If ice melts the water level – (1) Rises (2) Falls (3) Remains same (4) Falls first and them rises

Last Answer : (2) Falls

An ice block with a piece of lead embeded in it floats in water. If ice melts the water level (1) Rises (2) Falls (3) Remains same (4) Falls first and then rises

Description : An ice block with a piece of lead embeded in it floats in water. If ice melts the water level (1) Rises (2) Falls (3) Remains same (4) Falls first and then rises

Last Answer : Falls

The torque produced by a DC motor armature is the product of the force acting at the armature surface multiplied by _____________. A. work done by the armature in one revolution B. effective armature diameter at which the force acts C. maximum moment arm at the center of rotation of the armature D. perpendicular distance to its center of rotation

Description : The torque produced by a DC motor armature is the product of the force acting at the armature surface multiplied by _____________. A. work done by the armature in one revolution B. effective ... arm at the center of rotation of the armature D. perpendicular distance to its center of rotation

Last Answer : Answer: D

The center of gravity of a uniform lamina lies at (A) The center of heavy portion (B) The bottom surface (C) The midpoint of its axis (D) All of the above

Description : The center of gravity of a uniform lamina lies at (A) The center of heavy portion (B) The bottom surface (C) The midpoint of its axis (D) All of the above

Last Answer : (C) The midpoint of its axis

Assuming uniform density of the core, the acceleration due to gravity below the Earth's surface is A. inversely proportional to the square of the distance from the center of the Earth B. inversely proportional to the distance from the center of the Earth C. directly proportional to the square of the distance from the center of the Earth D. directly proportional to the distance from the center of the Earth

Description : Assuming uniform density of the core, the acceleration due to gravity below the Earth's surface is A. inversely proportional to the square of the distance from the center of the Earth ... center of the Earth D. directly proportional to the distance from the center of the Earth

Last Answer : directly proportional to the distance from the center of the Earth

Acceleration of free fall depends on the A. surface B. weight of object C. distance from center of Earth D. size of object

Description : Acceleration of free fall depends on the A. surface B. weight of object C. distance from center of Earth D. size of object

Last Answer : weight of object

Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component acts through the center of pressure for the vertical projection (C) The vertical component of the hydrostatic force on any surface is equal to the weight of the volume of the liquid above the area (D) The vertical component passes through the center of pressure of the volume

Description : Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component ... above the area (D) The vertical component passes through the center of pressure of the volume

Last Answer : Answer: Option D

Metacentric height is the distance between the metacentre and (A) Water surface(B) Center of pressure (C) Center of gravity (D) Center of buoyancy

Description : Metacentric height is the distance between the metacentre and (A) Water surface (B) Center of pressure (C) Center of gravity (D) Center of buoyancy

Last Answer : Answer: Option C

The center of pressure of a surface subjected to fluid pressure is the point (A) On the surface at which resultant pressure acts (B) On the surface at which gravitational force acts (C) At which all hydraulic forces meet (D) Similar to metacentre

Description : The center of pressure of a surface subjected to fluid pressure is the point (A) On the surface at which resultant pressure acts (B) On the surface at which gravitational force acts (C) At which all hydraulic forces meet (D) Similar to metacentre

Last Answer : Answer: Option A

What causes the current-carrying area at the center conductor of a coaxial line to be restricted to a small layer at the surface?

Description : What causes the current-carrying area at the center conductor of a coaxial line to be restricted to a small layer at the surface?

Last Answer : Skin effect.