A metel rod of the length 10cm and a rectangular cross-section of 1 cm xx `1//2` cm is connected to a battery across opposite faces. The resistance wi

1 Answer

Answer :

A metel rod of the length 10cm and a rectangular cross-section of 1 cm xx `1//2` cm is ... 2)` cm faces D. same irrepective of the three faces

Related questions

Description : The size of a carbon block is `1.0xx10 cm xx50 cm`. Find its resistance (i) between the opposite square faces (ii) between the opposite rectangular fa

Last Answer : The size of a carbon block is `1.0xx10 cm xx50 cm`. Find its resistance (i) between the opposite square ... of carbon is `3.5xx10^(-5) Omega cm`.

Description : A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V battery, the resistivity of wire is

Last Answer : A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V ... `4xx10^(-6)Omega-m` D. `1xx10^(-6)Omega-m`

Description : A battery of emf 2 V and internal resistance `0.5 Omega` is connected across a resistance of `9.5 Omega`. How many electrons pass through a cross-sect

Last Answer : A battery of emf 2 V and internal resistance `0.5 Omega` is connected across a resistance of `9. ... a cross-section of the resistance in 1 second ?

Description : A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The  extension in the rod was 1 mm only. If Esteel = 2 × 106  kg/cm2 , the side of the rod, is  (A) 1 cm  (B) 1.5 cm  (C) 2 cm  (D) 2.5 cm 

Last Answer : (C) 2 cm 

Description : AB is a potentiometer wire of length 100 cm and its resistance is `10Omega`. It is connected in series with a resistance R = 40 `Omega` and a battery

Last Answer : AB is a potentiometer wire of length 100 cm and its resistance is `10Omega`. It is connected in series with a ... `1.6V` C. `0.08V` D. `0.16V`

Description : Potentiometer wire of length `1 m` is connected in series with `490 Omega` resistance and `2 V` battery. If `0.2 mV/cm` is the potential gradient, the

Last Answer : Potentiometer wire of length `1 m` is connected in series with `490 Omega` resistance and `2 V` battery. If ... 7.9Omega` C. `5.9Omega` D. `6.9Omega`

Description : The radius of a circle is 10cm. The length of a chord is 12 cm. Then the distance of the chord from the centre is `"__________________"`.

Last Answer : The radius of a circle is 10cm. The length of a chord is 12 cm. Then the distance of the chord from the centre is `"__________________"`.

Description : The average length of the kidney of a man is about? A. 7cm to 8cm B. 8cm to 10 cm C. 10cm to 13 cm (Answer) D. 13cm to 16cm

Last Answer : C. 10cm to 13 cm (Answer)

Description : The external length, breadth and height of a closed box are 10cm, 9cm and 7cm respectively. The total inner surface area of the box is 262 sq.cm. If the walls of the box are of uniform thickness “t” cm, then “t” equals a) 1cm b) 23/3 cm c) 28/9 cm d) 42.5 cm

Last Answer : a) 1cm

Description : Consider a cube of material of sides 1 cm with a resistance of 0.003 Ω between its opposite faces. What is the resistance if the same volume of the material is drawn into a length of 50 cm with a uniform cross – section? A) 0.003 Ω B) 0.15 Ω C) 7.5 Ω D) None of these

Last Answer : Consider a cube of material of sides 1 cm with a resistance of 0.003 Ω between its opposite faces. What is the resistance if the same volume of the material is drawn into a length of 50 cm with a uniform cross – section? A) 0.003 Ω B) 0.15 Ω C) 7.5 Ω D) None of these

Description : A negligbly small current is passed through a wire of length 15 cm and uniform cross-section `6.0xx10^(-7) m^(2)` and its resistance is measured to be

Last Answer : A negligbly small current is passed through a wire of length 15 cm and uniform cross-section ` ... the material at the temperature of the experiment ?

Description : How many 10cm square pieces can be cut with 2m rectangular sheet?

Last Answer : What is the answer ?

Description : The resistance of a strip of copper of rectangular cross-section is 2Ω. A metal of resistivity twice that of copper is coated on its upper surface to a thickness equal to that of copper strip. The resistance of composite strip will be

Last Answer : The resistance of a strip of copper of rectangular cross-section is 2Ω. A metal of resistivity twice that of copper is coated on its upper surface to a thickness equal to that of copper strip. The resistance of composite strip will be 4/3Ω.

Description : In rectangular columns (cross-section b × h), the core is a  (A) Rectangle of lengths b/2 and h/2  (B) Square of length b/2  (C) Rhombus of length h/2  (D) Rhombus of diagonals b/3 and h/3 

Last Answer : (D) Rhombus of diagonals b/3 and h/3 

Description : Springs with rectangular or square cross section used for a. higher stiffness b. larger volume c. larger length d. smaller length

Last Answer : b. larger volume

Description : A metal rod of length l cuts across a uniform magnetic field B with a velocity v. If the resistance of the circuit of which the rod forms a part is r,

Last Answer : A metal rod of length l cuts across a uniform magnetic field B with a velocity v. If the resistance of the circuit of ... lv)/(r)` D. `(Blv^(2))/(r)`

Description : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l=wm which can slide on a perfectly condu

Last Answer : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l= ... (inN-m) at t=(0.3In 2) second.

Description : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length l=wm which can slide on a perfectly cond

Last Answer : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length ... (inN-m) at t=(0.3In 2) second.

Description : A conducting wire of cross-sectional area `1 cm^(2)` has `3 xx 10^(23)` charge carriers per m3. If wire carries a current of `24 mA`, then drift veloc

Last Answer : A conducting wire of cross-sectional area `1 cm^(2)` has `3 xx 10^(23)` charge carriers per m3. If wire carries ... 3)ms^(-1)` D. `5xx10^(-6)ms^(-1)`

Description : A rectangular loop consists of N closed wrapped turns and has dimendions `a xx b`. The loop is hinged along the Y-axis. What is the magnitude of the t

Last Answer : A rectangular loop consists of N closed wrapped turns and has dimendions `a xx b`. The loop is hinged along the Y- ... . `(-2Ni_(0)abB_(0)hat(j))/(5)`

Description : The potential differnce between the terminals of a battery of emf 6.0 V and internal resistance `1 Omega` drops to 5.8 V when connected across an exte

Last Answer : The potential differnce between the terminals of a battery of emf 6.0 V and internal resistance ... resistor . Find the resistance of the external res

Description : An electron in potentiometer experiences a force `2.4xx10^(-19)N`. The length of potentiometer wire is 6m. The emf of the battery connected across the

Last Answer : An electron in potentiometer experiences a force `2.4xx10^(-19)N`. The length of potentiometer wire is 6m. The emf of ... 6 V B. 9 V C. 12 V D. 15 V

Description : Two wires a and b, each of length 40 m and area of cross-section `10^(-7) m^(2)` , are connected in series and a potenital difference of 60 V is appli

Last Answer : Two wires a and b, each of length 40 m and area of cross-section `10^(-7) m^(2)` ... resistance, (ii) electric-field and (iii) current-dentsity.

Description : Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

Description : In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

Description : In Fig. 10.33, if OA = 10cm, AB = 16 cm and OD perpendicular to AB. Find the value of CD. -Maths 9th

Last Answer : Solution :- As OD is perpendicular to AB ⇒ AC = AB (Perpendicular from the centre to the chord bisects the chord) ∴ AC = AB/2 = 8cm In right △OCA, OA2 = AC2 + OC2 (102) = 82 + OC2 OC2 = 100 - 64 OC2 = 36 ... = 6cm CD = OD - OC = 10 - 6 = 4cm [∴ OA = OD = 10cm (radii)]

Description : ΔABC ~ ΔPQR. Area of ΔABC = 81 cm2 and area of ΔPQR =121 cm2. If altitudeAD = 9 cm, then PM is equal to (a) 9 cm (b) 11 cm (c) 10cm (d) None of these

Last Answer : (b) 11 cm

Description : Indian type W.C. pan shall have 10cm. S.C.I. trap P or S type with effective seal of (a) 5 cm.* (b) 10 cm. (c) 7.5 cm (d) None of these

Last Answer : (a) 5 cm.*

Description : Generally weeds seeds are abundant at a depth of a). 1.0-1.5cm b). 5 cm c).10cm d).15cm

Last Answer : a). 1.0-1.5cm

Description : A control rod (A) Should have small absorption cross-section (B) Is generally made of boron, hafnium or cadmium (C) Should have large absorption cross-section (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Last Answer : (B) 12.88

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm  length, is  (A) 200  (B) 240  (C) 360  (D) 416

Last Answer : (D) 416

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 240 (b) 416 (c) 360 (d) 400

Last Answer : (b) 416

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 200 (b) 240 (c) 360 (d) 416

Last Answer : (d) 416

Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose endsare hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2, the permissible maximumcrippling load will be (a) 1.288 tonnes (b) 12.88 (c) 128.8 tonnes (d) 288.0

Last Answer : (b) 12.88

Description : The most efficient cross section of sewers in a separate sewerage system is A. Parabolic B. Circular C. Rectangular D. New egged

Last Answer : ANS: B

Description : The suitable cross-section of sewers to carry combined flow, is A. Circular B. Egg shaped C. Rectangular D. Horse shoe shaped

Last Answer : ANS: B

Description : The most efficient cross-section of sewers in a combined sewerage system is A. Parabolic B. Circular C. Rectangular D. New egged

Last Answer : ANS: B

Description : The cross section of flywheel arm is 1. I section 2. Rectangular 3. Elliptical 4. Circular

Last Answer : 3. Elliptical

Description : The cross-section of the flywheel arm is, (A) I section (B) Rectangular (C) Elliptical (D) Circular

Last Answer : (C) Elliptical

Description : When a rectangular beam is loaded transversely, the maximum compressive stress develops on (A) Bottom fibre (B) Top fibre (C) Neutral axis (D) Every cross-section

Last Answer : (B) Top fibre

Description : A cantilever beam rectangular in cross-section is subjected to an isolated load at its free end. If the  width of the beam is doubled, the deflection of the free end will be changed in the ratio of  (A) 8  (B) 1/8  (C) 1/2  (D) 3

Last Answer : (C) 1/2 

Description : is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) ... ) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Last Answer : Answer: Option C

Description : is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Last Answer : Answer: Option C

Description : A furrow cross-section in a country plough is commonly a) Circular b) Triangular c) Rectangular d) Trapezoidal

Last Answer : ans b

Description : it is a harrow with peg shaped teeth of diamond cross section to a Rectangular frame. A) Spike tooth harrow C Spring tooth harrow B) Acme harrow D Triangular harrow.

Last Answer : Spike tooth harrow

Description : What is the distance away from midspan of a plastic hinge if developing in a simply supported beam of rectangular cross-section and span 6 m, subjected to a point load at the centre? (a) Zero (b) 1 m (c) 2 m (d) 3 m

Last Answer : (a) Zero

Description : The ratio of maximum shear stress to average shear stress is 4/3 in _______ a. circular cross-section b. rectangular cross-section c. square cross-section d. all of the above

Last Answer : a. circular cross-section

Description : A uniformly distributed load of 20 kN/m acts on a simply supported beam of rectangular cross section of width 20 mm and depth 60 mm. What is the maximum bending stress acting on the beam of 5m? a. 5030 Mpa b. 5208 Mpa c. 6600 Mpa d. Insufficient data

Last Answer : b. 5208 Mpa

Description : Yokes with rectangular cross-section are used for (a) small capacity transformers (b) medium capacity transformers (c) large capacity transformers (d) any of the above

Last Answer : (a) small capacity transformers