Description : harrow which consist of one or more blades attached to the beam Or frame, used for shallow working of the soil. A Spike tooth harrow B Acme harrow C Spring tooth harrow D Blade harrow
Last Answer : Blade harrow
Description : is a harrow which perform harrow operation by means of set or a number of sets of rotating slat each set being mounted on common shaft. a. Spike tooth harrow c. Triangular harrow b. Acme harrow. d. Disc harrow
Last Answer : Disc harrow
Description : harrow having curved knives. i. Spring tooth harrow. c) Acme harrow ii. Spikal tooth d) Spike tooth harrow
Last Answer : Acme harrow
Description : is also called as knife harrow. a. Spring tooth harrow b. Acme harrow c. Spike tooth harrow d. none of the above
Last Answer : Ans:- b. Acme harrow
Description : and guntaka are used prepare the seed bed mostly in clay soils. a. Spring tooth harrow b. Acme tooth harrow d. None of the above
Last Answer : Ans - c. Blade harrow
Description : It is a wooden plank used for smoothening the soil and crushing the weed. a. Spring tooth harrow b. Acme tooth harrow d. None of the above
Last Answer : Ans - c. Patela
Description : The spike teeth are in Triangular harrow. a. Movable b. Adjustable d. None of the above
Last Answer : Ans - c. fixed
Description : has amplitude of vibration is 200mm and frequency of operation is 400 cycle/ sec. b. Acme tooth harrow c. Blade harrow d. None of the above
Last Answer : Ans- a. Reciprocating power harrow
Description : Axial flow thresher utilises (a) Rasp bar cylinder (b) Spike tooth cylinder (c) Hammer mill cylinder (d) Peg tooth cylinder
Last Answer : (b) Spike tooth cylinder
Description : A furrow cross-section in a country plough is commonly a) Circular b) Triangular c) Rectangular d) Trapezoidal
Last Answer : ans b
Description : Implements commonly used in dry farming areas a). Sweep b). Blade harrow c). Spike tooth harrow d). Both a and b
Last Answer : d). Both a and b
Description : Blind hoeing with bullock/tractor drawn spike-tooth harrow successfully controls weeds in a). Potato b). Sugarcane c). Maize d). Both a and b
Description : is also called as knife harrow. a. Spring tooth harrow c. Fixed tooth harrow d. None of the above
Last Answer : Ans - b.Acme tooth harrow
Description : it is made of wooden plank used for smoothing the soil and crushing the Weeds . A) Triangular harrow C Blade harrow B) Patela D Guntaka
Last Answer : Patela
Description : The suitable cross-section of sewers to carry combined flow, is A. Circular B. Egg shaped C. Rectangular D. Horse shoe shaped
Last Answer : ANS: B
Description : The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2. Spike tooth and wire loop type 3. Spike tooth and hammer mill 4. hammer mill and flails
Last Answer : ans 3
Description : This type threasher consist of spike tooth cylinder, woven wire mesh concave and upper casing provide with helical louvers. a. Hammer mill c. Dummy d. None of above
Last Answer : Ans- b. Axial flow
Description : This type thresher consists of beater mounted on a shaft which rotates inside a closed casing and concave. a. Hammer mill b. Spike tooth d. None of above
Last Answer : Ans- c. Dummy
Description : In threshers what are mounted on the periphery of the cylinder A) Spike tooth type B) Raspbar type C) Syndicator type D) Wire loob type.
Last Answer : Spike tooth type
Description : A multi type thresher is equipped with a) Spike tooth cylinder b) Rasp bar cylinder c) Hammer mill cylinder d) All of the above
Last Answer : All of the above
Description : The dummy type thresher is also termed as a) Rasp bar type thresher b) Hammer mill type thresher c) Spike tooth type thresher d) Syndicator tooth type thresher
Last Answer : Hammer mill type thresher
Description : Identify the picture. a) Hummer mill type b) Spike-tooth type c) Dummy type d) Axial flow type
Last Answer : Hummer mill type
Description : are mounted on the Periphery of a cylinder that rotates inside a closed casing and concave. a) Dummy type c) spike-tooth type b) Hummer type d) Axial flow type
Last Answer : spike-tooth type
Description : It consists of spike tooth cylinder, woven- wire mesh concave and upper casing provided with helical concave. a) Dummy type c) Spike-tooth type b) Hummer type d) Axial flow type
Last Answer : Axial flow type
Description : It consists of beats mounted on a shaft which rotates inside a closed casing and concave. a) Dummy type c) Spike-tooth type c) Hummer type d) Axial flow type
Last Answer : Dummy type
Description : used in the soil when obstruction like stone, roots and weed are hidden below the ground surface. b. a. Straight tooth harrow c. a. Fixed tooth harrow d. None
Last Answer : Ans - a. Spring tooth harrow
Description : This type of harrow suitable to work in hard and stony soils. b. a. Straight tooth harrow c. a. Fixed tooth harrow d. None of the above.
Description : For the same height, the bottom width for no tension, (A) For triangular section is more than rectangular section (B) For rectangular section is more than triangular section (C) For triangular section is same as that of a rectangular section (D) None of these
Last Answer : (C) For triangular section is same as that of a rectangular section
Description : The most efficient section of a channel is (A) Triangular (B) Rectangular (C) Square (D) Trapezoidal
Last Answer : Answer: Option D
Description : A horse is tied to a peg hammered at one of the corner of a rectangular grass field of 40 m by 24 m by a rope 14 m long. Over how much area of the field can the horse graze? (1) 154 m2 (2) 308 m2 (3) 240 m2 (4) 480 m2
Last Answer : (1) 154 m2
Description : is part of the Cutter bar is shaped in Triangular shape with two cutting edges a) Knife head b) Knife back c) Grass board d) Knife Section
Last Answer : <!-- [endif] -->Knife Section
Description : Moment of Inertia of triangular section about an axis passing through its base is given by a.bh3/12 b.bh3/32 c.bh3/36 d.None of the above e.Tapered bearing
Last Answer : a. bh3/12
Description : A fillet weld is an approximately triangular cross section joining two surfaces lying parallels to each other. a) True b) False
Last Answer : b) False
Description : For a beam of triangular cross section, the ratio τmax/ τav is (a) 3/2 (b) 4/2 (c) 5/2 (d) None
Last Answer : (a) 3/2
Description : The coverage of is dry land weeder is 0.05 ha/day. a. Peg c. 0.05 ha/day.d. None of the above.
Last Answer : Ans - b. star
Description : The type wheel is suitable for lomy and sandy soil in dry land weeder. a. Peg c. cono d. None of the above.
Description : Peg or star wheel type weeder is suitable for weeding in lands. a. Wet c. Soft d. None of the above.
Last Answer : Ans - b. dry
Description : Axial flow thresher uses a) Raspbar type cylinder b) Serrated disc type c) Spike tooth d) Hammer mill
Last Answer : a) Raspbar type cylinder
Description : The two types of cylinder used on power wheat threshers are: a) Serrated disc and rasp bar b) Spike tooth and wire loop type c) Spike tooth and hammer mill d) Hammer mill and flails
Last Answer : c) Spike tooth and hammer mill
Description : Axial flow thresher uses a) Raspbar type cylinder b) Serrated disc type cylinder c) Spike tooth d) Hammer mill
Description : prevents disc from clogging. i. Scraper. c) slide disc ii. Spikal tooth. d) spring tooth
Last Answer : Scraper
Description : A metel rod of the length 10cm and a rectangular cross-section of 1 cm xx `1//2` cm is connected to a battery across opposite faces. The resistance wi
Last Answer : A metel rod of the length 10cm and a rectangular cross-section of 1 cm xx `1//2` cm is ... 2)` cm faces D. same irrepective of the three faces
Description : The most efficient cross section of sewers in a separate sewerage system is A. Parabolic B. Circular C. Rectangular D. New egged
Description : The most efficient cross-section of sewers in a combined sewerage system is A. Parabolic B. Circular C. Rectangular D. New egged
Description : The cross section of flywheel arm is 1. I section 2. Rectangular 3. Elliptical 4. Circular
Last Answer : 3. Elliptical
Description : The cross-section of the flywheel arm is, (A) I section (B) Rectangular (C) Elliptical (D) Circular
Last Answer : (C) Elliptical
Description : When a rectangular beam is loaded transversely, the maximum compressive stress develops on (A) Bottom fibre (B) Top fibre (C) Neutral axis (D) Every cross-section
Last Answer : (B) Top fibre
Description : In rectangular columns (cross-section b × h), the core is a (A) Rectangle of lengths b/2 and h/2 (B) Square of length b/2 (C) Rhombus of length h/2 (D) Rhombus of diagonals b/3 and h/3
Last Answer : (D) Rhombus of diagonals b/3 and h/3
Description : A cantilever beam rectangular in cross-section is subjected to an isolated load at its free end. If the width of the beam is doubled, the deflection of the free end will be changed in the ratio of (A) 8 (B) 1/8 (C) 1/2 (D) 3
Last Answer : (C) 1/2
Description : is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) ... ) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)
Last Answer : Answer: Option C