A rectangular loop consists of N closed wrapped turns and has dimendions `a xx b`. The loop is hinged along the Y-axis. What is the magnitude of the t

A rectangular loop consists of N closed wrapped turns and has dimendions `a xx b`. The loop is hinged along the Y-axis. What is the magnitude of the t
by

1 Answer

Answer :

A rectangular loop consists of N closed wrapped turns and has dimendions `a xx b`. The loop is hinged along the Y- ... . `(-2Ni_(0)abB_(0)hat(j))/(5)`
by
selected by

Related questions

i and j are unit vectors along X-axis and Y-axis respectively. What is the magnitude and direction of the vector i + j and i - j?

Description : i and j are unit vectors along X-axis and Y-axis respectively. What is the magnitude and direction of the vector i + j and i - j?

Last Answer : i and j are unit vectors along X-axis and Y-axis respectively. What is the magnitude and direction of the ... directions of (i + j) and (i - j)?

The maximum magnitude of shear stress due to shear force F on a rectangular section of area A at the neutral axis, is (A) F/A (B) F/2A (C) 3F/2A (D) 2F/3A

Description : The maximum magnitude of shear stress due to shear force F on a rectangular section of area A at  the neutral axis, is  (A) F/A (B) F/2A (C) 3F/2A (D) 2F/3A

Last Answer : (C) 3F/2A

A rectangular paper 11 cm by 8 cm can be exactly wrapped to cover the curved surface of a cylinder of height 8 cm . -Maths 9th

Description : A rectangular paper 11 cm by 8 cm can be exactly wrapped to cover the curved surface of a cylinder of height 8 cm . -Maths 9th

Last Answer : answer:

A metel rod of the length 10cm and a rectangular cross-section of 1 cm xx `1//2` cm is connected to a battery across opposite faces. The resistance wi

Description : A metel rod of the length 10cm and a rectangular cross-section of 1 cm xx `1//2` cm is connected to a battery across opposite faces. The resistance wi

Last Answer : A metel rod of the length 10cm and a rectangular cross-section of 1 cm xx `1//2` cm is ... 2)` cm faces D. same irrepective of the three faces

A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis (A) Remains within the flange (B) Remains below the slab (C) Coincides the geometrical centre of the beam (D) None of these

Description : A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis (A) Remains within the flange (B) Remains below the slab (C) Coincides the geometrical centre of the beam (D) None of these

Last Answer : Answer: Option A

If the permissible stress in steel in tension is 140 N/mm², then the depth of neutral axis for a singly reinforced rectangular balanced section will be (A) 0.35 d (B) 0.40 d (C) 0.45 d (D) Dependent on grade of concrete also

Description : If the permissible stress in steel in tension is 140 N/mm², then the depth of neutral axis for a singly reinforced rectangular balanced section will be (A) 0.35 d (B) 0.40 d (C) 0.45 d (D) Dependent on grade of concrete also

Last Answer : Answer: Option B

For a reinforced concrete beam section, the shape of shear stress diagram is (a) Parabolic over the whole section with maximum value at the neutral axis. (b) Parabolic above the neutral axis and rectangular below the neutral axis. (c) Linearly varying as the distance form the N.A. (d) All the above.

Description : For a reinforced concrete beam section, the shape of shear stress diagram is (a) Parabolic over the whole section with maximum value at the neutral axis. (b) Parabolic above the neutral axis and rectangular below the neutral axis. (c) Linearly varying as the distance form the N.A. (d) All the above.

Last Answer : (b) Parabolic above the neutral axis and rectangular below the neutral axis.

Consider the following four statements (A–D) related to the common frog Rana tigrina, and select the correct option stating which ones are true (T) and which ones are false (F). Statements: A. On dry land it would die due to lack of O2 if its mouth is forcibly kept closed for a few days. B. It has four-chambered heart. C. On dry land it turns uricotelic from ureotelic. D. Its life-history is carried out in pond water. A B C D (a) T F F T (b) T T F F (c) F F T T (d) F T T F

Description : Consider the following four statements (A-D) related to the common frog Rana tigrina, and select the correct option stating which ones are true (T) and which ones are false (F). Statements: A. On dry land it would die due to lack of O2 if ... C D (a) T F F T (b) T T F F (c) F F T T (d) F T T F

Last Answer : (a) T F F T

Which of these is a closed curve that is longer along one axis?

Description : Which of these is a closed curve that is longer along one axis?

Last Answer : ellipse

Which of these is a closed curve that is longer along one axis?

Description : Which of these is a closed curve that is longer along one axis?

Last Answer : ellipse

Magnetic field due to a ring having n turns at a distance `x` on its axis is proportional to (if `r =` radius of ring)

Description : Magnetic field due to a ring having n turns at a distance `x` on its axis is proportional to (if `r =` radius of ring)

Last Answer : Magnetic field due to a ring having n turns at a distance `x` on its axis is proportional to (if `r =` radius of ring) ... 2))/((x^(2)+r^(2))^(3//2))`

A circular loop of mass m and radius r in X-Y plane of a horizontal table as shown in figure. A uniform magnetic field B is applied parallel to X-axis

Description : A circular loop of mass m and radius r in X-Y plane of a horizontal table as shown in figure. A uniform magnetic field B is applied parallel to X-axis

Last Answer : A circular loop of mass m and radius r in X-Y plane of a horizontal table as shown in figure. A uniform ... . `(mg)/(2pirB)` D. `(pirB)/(mgl)`

A person walks from point P to point Q along a straight road ¡n 10 minutes, then turns back and returns to point R which is midway

Description : A person walks from point P to point Q along a straight road ¡n 10 minutes, then turns back and returns to point R which is midway

Last Answer : A person walks from point P to point Q along a straight road n 10 minutes, then turns back and ... velocity of the person in going from P to R.

If `(A + B^(T))^(T)` is a matrix of order `4 xx 3`, then the order of matrix B is____.

Description : If `(A + B^(T))^(T)` is a matrix of order `4 xx 3`, then the order of matrix B is____.

Last Answer : If `(A + B^(T))^(T)` is a matrix of order `4 xx 3`, then the order of matrix B is____.

Write the application of the following antennas: 1) Rectangular antenna 2) Dish antenna 3) Horn antenna 4) Loop antenna 5) Yagi-Uda antenna.

Description : Write the application of the following antennas: 1) Rectangular antenna 2) Dish antenna 3) Horn antenna 4) Loop antenna 5) Yagi-Uda antenna. 

Last Answer : Applications:  1.Rectangular antenna  i)Used in Mobile and satellite communication ii)Used in Global Positioning System iii) Used for Radio Frequency Identification (RFID) iv) Radar  Dish ... antenna. 2. Yagi-Uda antenna is used in conditional Access System (CAS) at the decryptor.

E.M.F for a coil depends upon A. the cross sectional area B. no. of turns of wire C. the magnitude of magnetic flux density D. all of above

Description : E.M.F for a coil depends upon A. the cross sectional area B. no. of turns of wire C. the magnitude of magnetic flux density D. all of above

Last Answer : all of above

If `a_j=0(i!=j)anda_(i j)=4(i=j)`,,then the matrix `A =[a_(i j)]_(n xx n)` is a matrix

Description : If `a_j=0(i!=j)anda_(i j)=4(i=j)`,,then the matrix `A =[a_(i j)]_(n xx n)` is a matrix

Last Answer : If `a_j=0(i!=j)anda_(i j)=4(i=j)`,,then the matrix `A =[a_(i j)]_(n xx n)` is a matrix

If `((x^(m)xx x^(n))/x^(p))^(q)=x^(k)`, then `k=` ________.

Description : If `((x^(m)xx x^(n))/x^(p))^(q)=x^(k)`, then `k=` ________.

Last Answer : If `((x^(m)xx x^(n))/x^(p))^(q)=x^(k)`, then `k=` ________.

`(xy)^(n)=x^(n)xx` _______.

Description : `(xy)^(n)=x^(n)xx` _______.

Last Answer : `(xy)^(n)=x^(n)xx` _______.

If a gas absorbs `200J` of heat and expands by `500 cm^(3)` against a constant pressure of `2 xx 10^(5) N m^(-2)`, then the change in internal energy

Description : If a gas absorbs `200J` of heat and expands by `500 cm^(3)` against a constant pressure of `2 xx 10^(5) N m^(-2)`, then the change in internal energy

Last Answer : If a gas absorbs `200J` of heat and expands by `500 cm^(3)` against a constant pressure of `2 xx 10^(5) N ... . `-100 J` C. `+100 J` D. None of these

A particular hydrogen like atom with radiation of frequency `2.467 xx 10^(15)Hz` when it makes transition from `n = 3 to n = 1` ,What will be the freq

Description : A particular hydrogen like atom with radiation of frequency `2.467 xx 10^(15)Hz` when it makes transition from `n = 3 to n = 1` ,What will be the freq

Last Answer : A particular hydrogen like atom with radiation of frequency `2.467 xx 10^(15)Hz` when it makes transition from ... a transition from `n = 3 to n= 1`?

A long straight wire is carrying a current of 12 A . The magnetic field at a distance of 8 cm is `(mu_(0) =4pi xx 10^(-7) N A ^(2))`

Description : A long straight wire is carrying a current of 12 A . The magnetic field at a distance of 8 cm is `(mu_(0) =4pi xx 10^(-7) N A ^(2))`

Last Answer : A long straight wire is carrying a current of 12 A . The magnetic field at a distance of 8 cm is `(mu_(0) =4pi xx ... /m^(2)` D. `4xx10^(-5)Wb//m^(2)`

What is the shear stress acting along the neutral axis of triangular beam section, with base 60 mm and height 150 mm, when shear force of 30 kN acts? a. 15.36 N/mm2 b. 10.6 N/mm2 c. 8.88 N/mm2 d. Insufficient data

Description : What is the shear stress acting along the neutral axis of triangular beam section, with base 60 mm and height 150 mm, when shear force of 30 kN acts? a. 15.36 N/mm2 b. 10.6 N/mm2 c. 8.88 N/mm2 d. Insufficient data

Last Answer : c. 8.88 N/mm2

Cri-du-chat syndrome in humans is caused by the (a) trisomy of 21st chromosome (b) fertilisation of an XX egg by a normal Y-bearing sperm (c) loss of half of the short arm of chromosome 5 (d) loss of half of the long arm of chromosome 5.

Description : Cri-du-chat syndrome in humans is caused by the (a) trisomy of 21st chromosome (b) fertilisation of an XX egg by a normal Y-bearing sperm (c) loss of half of the short arm of chromosome 5 (d) loss of half of the long arm of chromosome 5.

Last Answer : (c) loss of half of the short arm of chromosome 5

.Male XX and female XY sometime occur due to (a) deletion (b) transfer of segments in X and Y chromosome (c) aneuploidy (d) hormonal imbalance.

Description : .Male XX and female XY sometime occur due to (a) deletion (b) transfer of segments in X and Y chromosome (c) aneuploidy (d) hormonal imbalance.

Last Answer : (b) transfer of segments in X and Y chromosome

The magnitude of the volume of a closed right circular cylinder of unit height divided by the magnitude of the total surface area of the -Maths 9th

Description : The magnitude of the volume of a closed right circular cylinder of unit height divided by the magnitude of the total surface area of the -Maths 9th

Last Answer : answer:

Which is the correct statement about law of polygon of forces? (A) If any number of forces acting at a point can be represented by the sides of a polygon taken in order, then the forces are in equilibrium (B) If any number of forces acting at a point can be represented in direction and magnitude by the sides of a polygon, then the forces are in equilibrium (C) If a polygon representing forces acting at a point is closed then forces are in equilibrium (D) If any number of forces acting at a point can be represented in direction and magnitude by the sides of a polygon taken in order, then the forces are in equilibrium

Description : Which is the correct statement about law of polygon of forces?  (A) If any number of forces acting at a point can be represented by the sides of a polygon taken  in order, then the ... direction and magnitude by  the sides of a polygon taken in order, then the forces are in equilibrium 

Last Answer : (D) If any number of forces acting at a point can be represented in direction and magnitude by  the sides of a polygon taken in order, then the forces are in equilibrium 

The magnitude of water hammer depends upon the (A) Elastic properties of the pipe material (B) Elastic properties of the liquid flowing through the pipe (C) Speed at which the valve is closed (D) All of the above

Description : The magnitude of water hammer depends upon the (A) Elastic properties of the pipe material (B) Elastic properties of the liquid flowing through the pipe (C) Speed at which the valve is closed (D) All of the above

Last Answer : Answer: Option D

A proton is moving along the negative direction of X-axis in a magnetic field directed along the positive direction of Y-axis. The proton will be defl

Description : A proton is moving along the negative direction of X-axis in a magnetic field directed along the positive direction of Y-axis. The proton will be defl

Last Answer : A proton is moving along the negative direction of X-axis in a magnetic field directed along the positive ... Y-axis C. Z-axis D. None of these

Two infinitely long, thin, insulated, straight wires lie in the x-y plane along the x- and y- axis respectively. Each wire carries a current I, respec

Description : Two infinitely long, thin, insulated, straight wires lie in the x-y plane along the x- and y- axis respectively. Each wire carries a current I, respec

Last Answer : Two infinitely long, thin, insulated, straight wires lie in the x-y plane along the x- and y- axis respectively. Each ... x C. y = x-1 D. y = -x+1

What is a graph is plotted taking °C along the Y-axis and of K along the X- axis?

Description : What is a graph is plotted taking °C along the Y-axis and of K along the X- axis?

Last Answer : Straight line

CASE tool is a popular graphic depiction of the work plan that lists project tasks along a y-axis, time along an x-axis, and uses shaded boxes to represent tasks.

Description : CASE tool is a popular graphic depiction of the work plan that lists project tasks along a y-axis, time along an x-axis, and uses shaded boxes to represent tasks.

Last Answer : Ans: False

. Which attribute of text tag of SVG represents the shift along with y-axis?

Description : . Which attribute of text tag of SVG represents the shift along with y-axis?

Last Answer : 'dy' attribute of text tag of SVG represents the shift along with y-axis.

The graphical representation of variation of axial load on y axis and position of cross section along x axis is called as _____ (a) Bending moment diagram (b) Shear force diagram (c) Stress-strain diagram (d) Trust diagram

Description : The graphical representation of variation of axial load on y axis and position of cross section along x axis is called as _____ (a) Bending moment diagram (b) Shear force diagram (c) Stress-strain diagram (d) Trust diagram

Last Answer : (d) Trust diagram

An ELECTRON moving horizontally along the +x axis enters a region of space with a horizontal uniform magnetic field pointing in the +y direction. The electron will be deflected: w) -y direction x) +y direction y) -z direction z) +z direction

Description : An ELECTRON moving horizontally along the +x axis enters a region of space with a horizontal uniform magnetic field pointing in the +y direction. The electron will be deflected: w) -y direction x) +y direction y) -z direction z) +z direction

Last Answer : ANSWER: Y -- -Z DIRECTION

An incident ray comes in parallel to the principle axis of a concave mirror. Is it reflected: w) back along the incident ray x) at 30 degrees to incident ray y) through the focal point z) through the center of curvature

Description : An incident ray comes in parallel to the principle axis of a concave mirror. Is it reflected: w) back along the incident ray x) at 30 degrees to incident ray y) through the focal point z) through the center of curvature

Last Answer : ANSWER: Y -- THROUGH THE FOCAL POINT 

Given options show wooden joints, each made of 2 wooden blocks of different colours with a wooden pin at the centre. All joints can be released along the Z axis. Which of the joints can be released along the Y axis?

Description : Given options show wooden joints, each made of 2 wooden blocks of different colours with a wooden pin at the centre. All joints can be released along the Z axis. Which of the joints can be released along the Y axis?

Last Answer : C

The volume of a closed square based rectangular box is 1000 cubic metre. The cost of constructing the base is 15 paise per square metre and the cost o

Description : The volume of a closed square based rectangular box is 1000 cubic metre. The cost of constructing the base is 15 paise per square metre and the cost o

Last Answer : The volume of a closed square based rectangular box is 1000 cubic metre. The cost of ... dimensions of box for minimum cost of construction.

Moment of force depends upon A. magnitude of force B. perpendicular distance of force from pivot C. both A and B D. axis of rotation

Description : Moment of force depends upon A. magnitude of force B. perpendicular distance of force from pivot C. both A and B D. axis of rotation

Last Answer : both A and B

The rectangular coil of area A is in a field B. Find the torque about the Z-axis when the coil lies in the position shown and carries a current I.

Description : The rectangular coil of area A is in a field B. Find the torque about the Z-axis when the coil lies in the position shown and carries a current I.

Last Answer : The rectangular coil of area A is in a field B. Find the torque about the Z-axis when the coil ... 2IAM in positive Z-axis D. 2IAB in negative Z-axis

The moment of inertia of a rectangular section of width and depth about an axis passing through C.G. and parallel to its width is (A) BD²/6 (B) BD3 /6 (C) BD3 /12 (D) B²D/6

Description : The moment of inertia of a rectangular section of width and depth about an axis passing  through C.G. and parallel to its width is  (A) BD²/6  (B) BD3 /6  (C) BD3 /12  (D) B²D/6 

Last Answer : (C) BD3 /12 

When a rectangular beam is loaded transversely, the maximum compressive stress develops on (A) Bottom fibre (B) Top fibre (C) Neutral axis (D) Every cross-section

Description : When a rectangular beam is loaded transversely, the maximum compressive stress develops on (A) Bottom fibre (B) Top fibre (C) Neutral axis (D) Every cross-section

Last Answer : (B) Top fibre

If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be. (A) Straight below centroidal axis (B) Parabolic with convexity downward (C) Parabolic with convexity upward (D) Straight above centroidal axis

Description : If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be. (A) Straight below centroidal axis (B) Parabolic with convexity downward (C) Parabolic with convexity upward (D) Straight above centroidal axis

Last Answer : Answer: Option B

If the tendon is placed at an eccentricity e below the centroidal axis of the longitudinal axis of a rectangular beam (sectional modulus Z and stressed load P in tendon) the stress at the extreme top edge (A) Is increased by PZ/e (B) Is increased by Pe/Z (C) Is decreased by Pe/Z (D) Remains unchanged

Description : If the tendon is placed at an eccentricity e below the centroidal axis of the longitudinal axis of a rectangular beam (sectional modulus Z and stressed load P in tendon) the stress at the extreme top edge (A) Is ... by PZ/e (B) Is increased by Pe/Z (C) Is decreased by Pe/Z (D) Remains unchanged

Last Answer : Answer: Option C

A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Description : A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Last Answer : Answer: Option C

If is the sectional area of a pre-stressed rectangular beam provided with a tendon pre-stressed by a force through its centroidal longitudinal axis, the compressive stress in concrete, is (A) P/A (B) A/P (C) P/2A (D) 2A/P

Description : If is the sectional area of a pre-stressed rectangular beam provided with a tendon pre-stressed by a force through its centroidal longitudinal axis, the compressive stress in concrete, is (A) P/A (B) A/P (C) P/2A (D) 2A/P

Last Answer : Answer: Option A

For a reinforced concrete section, the shape of shear stress diagram is (A) Wholly parabolic (B) Wholly rectangular (C) Parabolic above neutral axis and rectangular below neutral axis (D) Rectangular above neutral axis and parabolic below neutral axis

Description : For a reinforced concrete section, the shape of shear stress diagram is (A) Wholly parabolic (B) Wholly rectangular (C) Parabolic above neutral axis and rectangular below neutral axis (D) Rectangular above neutral axis and parabolic below neutral axis

Last Answer : Answer: Option C

A simply supported rectangular beam is uniformly loaded and is prestressed. The tendon provided for prestressing should be (a) Straight, above centroidal axis (b) Straight, below centroidal axis (c) parabolic, with convexity upward (d) Parabolic, with convexity downward

Description : A simply supported rectangular beam is uniformly loaded and is prestressed. The tendon provided for prestressing should be (a) Straight, above centroidal axis (b) Straight, below centroidal axis (c) parabolic, with convexity upward (d) Parabolic, with convexity downward

Last Answer : (d) Parabolic, with convexity downward

The effective depth of a singly reinforced rectangular beam is 300mm. the section is over-reinforced and the neutral axis is 120mm below the top. If the maximum stress attained by concrete is 5N/mn2 and the modular ratio is 18, then the stress developed in the steel will (a) 130N/mm2 (b) 135N/mm2 (c) 160N/mm2 (d) 180N/mm2

Description : The effective depth of a singly reinforced rectangular beam is 300mm. the section is over-reinforced and the neutral axis is 120mm below the top. If the maximum stress attained by concrete is 5N/mn2 and the modular ratio ... in the steel will (a) 130N/mm2 (b) 135N/mm2 (c) 160N/mm2 (d) 180N/mm2

Last Answer : (b) 135N/mm2