Two galvanometers A and B require 3 mA and 5 mA respectively to produce the same deflection of `i_(0)` division. Then

Two galvanometers A and B require 3 mA and 5 mA respectively to produce the same deflection of `i_(0)` division. Then
by

1 Answer

Answer :

Two galvanometers A and B require 3 mA and 5 mA respectively to produce the same deflection of `i_(0) ... sensitiveness of B is 5/3 times of that of A
by
selected by

Related questions

A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Description : A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Last Answer : False.

A galvanometer of 65 Ω resistance gives full scale deflection with 4 mA current. In order to convert it into ammeter, the range of 10 A is connected with it, the shunt resistance should be a) 0.1 Ω b) 0.2 Ω c) 0.06 Ω d) 0.03 Ω

Description : A galvanometer of 65 Ω resistance gives full scale deflection with 4 mA current. In order to convert it into ammeter, the range of 10 A is connected with it, the shunt resistance should be a) 0.1 Ω b) 0.2 Ω c) 0.06 Ω d) 0.03 Ω

Last Answer : d) 0.03 Ω

The bond energies of `F_(2),Cl_(2),Br_(2)` and `I_(2)` are 155.4, 243.6, 193.2 and `151.2 Kjmol^(-1)` respectively. The strongest bond is :

Description : The bond energies of `F_(2),Cl_(2),Br_(2)` and `I_(2)` are 155.4, 243.6, 193.2 and `151.2 Kjmol^(-1)` respectively. The strongest bond is :

Last Answer : The bond energies of `F_(2),Cl_(2),Br_(2)` and `I_(2)` are 155.4, 243.6, 193.2 and `151.2 Kjmol^(-1)` ... . F -F B. Cl - Cl C. Br - Br D. I - I

In the diagram `I_(1),I_(2)` are the strength of the currents in the loop and straight conductors respectively `OA=AB=R.` the net magnetic field at th

Description : In the diagram `I_(1),I_(2)` are the strength of the currents in the loop and straight conductors respectively `OA=AB=R.` the net magnetic field at th

Last Answer : In the diagram `I_(1),I_(2)` are the strength of the currents in the loop and straight conductors respectively `OA=AB= ... ` C. `1/(pi)` D. `1/(2 pi)`

Calculate the resistance of shunt required to make a milliammeter which gives maximum deflection for a current of 15 mA and which has a resistance of 5 Ω; read up to 10 Amp.

Description : Calculate the resistance of shunt required to make a milliammeter which gives maximum deflection for a current of 15 mA and which has a resistance of 5 Ω; read up to 10 Amp.

Last Answer : Answer :

A galvanometer has a coil of resistance `100 Omega` and gives a full-scale deflection for `30 mA` current. If it is to work as a voltmeter of `30 V` r

Description : A galvanometer has a coil of resistance `100 Omega` and gives a full-scale deflection for `30 mA` current. If it is to work as a voltmeter of `30 V` r

Last Answer : A galvanometer has a coil of resistance `100 Omega` and gives a full-scale deflection for `30 mA` current. ... Omega` C. `1000 Omega` D. `1800 Omega`

A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up

Description : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is (A) 9997 Ω (B) 10000 Ω (C) 997 Ω (D) 10003 Ω

Last Answer : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is 9997 Ω

The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. ...

Description : The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. This is to have full deflection when 100V is measured. What is the value of series resistor to be used?

Last Answer : The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. This is to have full deflection when 100V is measured. 99.99 K ohms is the value of series resistor to be used.

The full-scale deflection current of an ammeter is 1 mA and its internal...

Description :  The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. If this meter is to have full deflection at 5A, what is the value of the shunt resistance to be used?

Last Answer :  The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. If this meter is to have full deflection at 5A, 1/49.99 ohms is the value of the shunt resistance to be used.

Two parallel long wires carry currents `i_(1) "and" i_(2)` with `i_(1) gt i_(2)`.When the currents are in the same direction then the magnetic field m

Description : Two parallel long wires carry currents `i_(1) "and" i_(2)` with `i_(1) gt i_(2)`.When the currents are in the same direction then the magnetic field m

Last Answer : Two parallel long wires carry currents `i_(1) "and" i_(2)` with `i_(1) gt i_(2)`.When the currents are in the same ... 4` B. `5:3` C. `7:11` D. `11:7`

How often do job listings say they require a certain type of BA or MA, but they will secretly accept others?

Description : How often do job listings say they require a certain type of BA or MA, but they will secretly accept others?

Last Answer : I imagine that the number of people who respond to the advert will dictate how the company will shortlist. If they have a lot of applicants then they will be probably use that criteria to shortlist ... be more willing to widen the criteria and start looking at the sort of people in your examples.

If `0.5 `mole `H_(2)` is reacted with 0.5 mole `I_(2)` in a ten `-` litre container at `444^(@)C` and at same temperature value of equilibrium constan

Description : If `0.5 `mole `H_(2)` is reacted with 0.5 mole `I_(2)` in a ten `-` litre container at `444^(@)C` and at same temperature value of equilibrium constan

Last Answer : If `0.5 `mole `H_(2)` is reacted with 0.5 mole `I_(2)` in a ten `-` litre container at `444^(@)C` and at ... B. `(1)/(7)` C. `sqrt((1)/(7))` D. 49

If two meters X and Y requires 40mA and 50mA respectively, to give full scale deflection, then:

Last Answer : If two meters X and Y requires 40mA and 50mA respectively, to give full scale deflection, then: X is more sensitive

Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2.0mm respectively. The resistivity of the ma

Description : Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2.0mm respectively. The resistivity of the ma

Last Answer : Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2 ... the material is `2.0xx10^(-8)(Omega)m`.

Two ores A1 and A2 of a metal M show the following reactivity: `A_(1)=CuCo_(3).Cu(OH)_(3),S=Cu` `P=Cu_(2)I_(2): G=SO_(2)` . Then `A_(2)` is

Description : Two ores A1 and A2 of a metal M show the following reactivity: `A_(1)=CuCo_(3).Cu(OH)_(3),S=Cu` `P=Cu_(2)I_(2): G=SO_(2)` . Then `A_(2)` is

Last Answer : Two ores A1 and A2 of a metal M show the following reactivity: `A_(1)=CuCo_(3).Cu(OH)_(3),S=Cu` `P=Cu_(2) ... )` B. `CuO` C. `CuCO_(3)` D. `Cu_(2)S`

Assertion At the centre of a circular current carrying loop `(I_(1))`, there is an infinitely long straight of the circle. Then magnetic force of attr

Description : Assertion At the centre of a circular current carrying loop `(I_(1))`, there is an infinitely long straight of the circle. Then magnetic force of attr

Last Answer : Assertion At the centre of a circular current carrying loop `(I_(1))`, there is an infinitely long ... at centre is inwards, parallel to `I_(2)`.

For a reaction `H_(2(g))+I_(2(g))rArr2HI_((g))at 721^(@)C` the value of equilibrium constant is 50 . If 0.5 moles each of `H_(2)` & `I(2)` is added to

Description : For a reaction `H_(2(g))+I_(2(g))rArr2HI_((g))at 721^(@)C` the value of equilibrium constant is 50 . If 0.5 moles each of `H_(2)` & `I(2)` is added to

Last Answer : For a reaction `H_(2(g))+I_(2(g))rArr2HI_((g))at 721^(@)C` the value of equilibrium constant is 50 . ... constant will be . A. 100 B. 25 C. 50 D. 200

Two long conductors, separated by a distance `d` carry current `I_(1) and I_(2)` in the same direction . They exert a force `F` on each other. Now the

Description : Two long conductors, separated by a distance `d` carry current `I_(1) and I_(2)` in the same direction . They exert a force `F` on each other. Now the

Last Answer : Two long conductors, separated by a distance `d` carry current `I_(1) and I_(2)` in the same direction . They exert a ... . `-(2F)/(3)` D. `-(F)/(3)`

Two long conductors, separated by a distance `d` carry current `I_(1) and I_(2)` in the same direction . They exert a force `F` on each other. Now the

Description : Two long conductors, separated by a distance `d` carry current `I_(1) and I_(2)` in the same direction . They exert a force `F` on each other. Now the

Last Answer : Two long conductors, separated by a distance `d` carry current `I_(1) and I_(2)` in the same direction . They exert a ... C. `(2F)/(3)` D. `(-2F)/(3)`

Consider three CPU intensive processes P1, P2, P3 which require 20, 10 and 30 units of time, arrive at times 1, 3 and 7 respectively. Suppose operating system is implementing Shortest Remaining Time first (preemptive scheduling) algorithm, then .............. context switches are required (suppose context switch at the beginning of Ready queue and at the end of Ready queue are not counted). (A) 3 (B) 2 (C) 4 (D) 5

Description : Consider three CPU intensive processes P1, P2, P3 which require 20, 10 and 30 units of time, arrive at times 1, 3 and 7 respectively. Suppose operating system is implementing Shortest Remaining Time first (preemptive scheduling) ... end of Ready queue are not counted). (A) 3 (B) 2 (C) 4 (D) 5

Last Answer : (A) 3

Which of the following xenon compound has the same number of lone pairs as in `I_(3)^(-)`? (near central atom)

Description : Which of the following xenon compound has the same number of lone pairs as in `I_(3)^(-)`? (near central atom)

Last Answer : Which of the following xenon compound has the same number of lone pairs as in `I_(3)^(-)`? (near central atom) ... XeO_(3)` C. `XeF_(4)` D. `XeO_(4)`

Two coils have a mutual inductance 0.005H. The current changes in the first coil according to the equation `I=I_(0) sin omegat "where" I_(0)=10A and o

Description : Two coils have a mutual inductance 0.005H. The current changes in the first coil according to the equation `I=I_(0) sin omegat "where" I_(0)=10A and o

Last Answer : Two coils have a mutual inductance 0.005H. The current changes in the first coil according to the equation `I ... (pi//x)` volts. Find the value of x.

Three different solutions of oxidising agents `KMnO_(4),K_(2)Cr_(2)O_(7) " and "I_(2)` is titrated separately with 0.158 gm of `Na_(2)S_(2)O_(3)`. If

Description : Three different solutions of oxidising agents `KMnO_(4),K_(2)Cr_(2)O_(7) " and "I_(2)` is titrated separately with 0.158 gm of `Na_(2)S_(2)O_(3)`. If

Last Answer : Three different solutions of oxidising agents `KMnO_(4),K_(2)Cr_(2)O_(7) " and "I_(2)` is ... D. all three oxidising agent can act as self indicator.

The current through a wire depends on time as `I=I_(0)+alpha t`, where `I_(0)=10` A and `alpha=4 As^(-1)`. Find the charge that flows across a section

Description : The current through a wire depends on time as `I=I_(0)+alpha t`, where `I_(0)=10` A and `alpha=4 As^(-1)`. Find the charge that flows across a section

Last Answer : The current through a wire depends on time as `I=I_(0)+alpha t`, where `I_(0)=10` A and ... that flows across a section of the wire in 10 seconds.

Find total number coils in a spring having square and ground ends. Deflection in the spring is 6mm when load of 1100N is applied. Modulus of rigidity is 81370N/mm². Wire diameter and pitch circle diameter are 10mm and 50mm respectively. a) 7 b) 6 c) 5 d) 4

Description : Find total number coils in a spring having square and ground ends. Deflection in the spring is 6mm when load of 1100N is applied. Modulus of rigidity is 81370N/mm². Wire diameter and pitch circle diameter are 10mm and 50mm respectively. a) 7 b) 6 c) 5 d) 4

Last Answer : a) 7

If α=0.995, IE=10 mA and ICO=0.5 mA, then ICEO will be...

Description : If α=0.995, IE=10 mA and ICO=0.5 mA, then ICEO will be  (A) 100 μA (B) 25 μA (C) 10.1 μA (D) 10.5 μA 

Last Answer : answer for this problem  

The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is (A) 18° 15' E (B) 18° 15' N (C) 18° 15' W (D) 18° 15' L

Description : The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is (A) 18° 15' E (B) 18° 15' N (C) 18° 15' W (D) 18° 15' L

Last Answer : (D) 18° 15' L

If `10g` of `V_(2)O_(5)` is dissolved in acid and is reduced to `V^(2+)` by zinc metal, how many mole `I_(2)` could be reduced by the resulting soluti

Description : If `10g` of `V_(2)O_(5)` is dissolved in acid and is reduced to `V^(2+)` by zinc metal, how many mole `I_(2)` could be reduced by the resulting soluti

Last Answer : If `10g` of `V_(2)O_(5)` is dissolved in acid and is reduced to `V^(2+)` by zinc metal, how many mole `I_(2 ... 127`) A. 0.11 B. 0.22 C. 0.055 D. 0.44

`I_(2)` produced when ozone reacts with moist KI is used to convert `C_(2)H_(5)OH` to `CI_(3)CHO`. Number of moles of ozone required to convert 1 mole

Description : `I_(2)` produced when ozone reacts with moist KI is used to convert `C_(2)H_(5)OH` to `CI_(3)CHO`. Number of moles of ozone required to convert 1 mole

Last Answer : `I_(2)` produced when ozone reacts with moist KI is used to convert `C_(2)H_(5)OH` to `CI_(3)CHO`. Number of ... CI_(3)CHO` is A. 1 B. 2 C. 4 D. 3

At high discharge rates, nickel-cadmium storage batteries are superior to lead-acid batteries because they __________. A. require fewer cells for the same voltage and less mounting space B. are able to produce higher voltages and do not have to be charged as often C. can be charged and discharged many times without much damage D. have no individual cells to replace at the end of useful life

Description : At high discharge rates, nickel-cadmium storage batteries are superior to lead-acid batteries because they __________. A. require fewer cells for the same voltage and less mounting space B. are able to ... times without much damage D. have no individual cells to replace at the end of useful life

Last Answer : Answer: C

Which field is used to produce deflection in a television picture tube? -Do You Know?

Description : Which field is used to produce deflection in a television picture tube? -Do You Know?

Last Answer : answer:

Which field is used to produce deflection in a television picture tube?

Description : Which field is used to produce deflection in a television picture tube?

Last Answer : A magnetic fields

The force required to produce unit deflection is known as (A) gradient of spring (B) stiffness of the spring (C) spring constant (D) all of the above

Description : The force required to produce unit deflection is known as (A) gradient of spring (B) stiffness of the spring (C) spring constant (D) all of the above

Last Answer : (D) all of the above

The spring index is, (A) Ratio of wire diameter to mean coil diameter (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Description : The spring index is, (A) Ratio of wire diameter to mean coil diameter (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Last Answer : (C) Ratio of mean coil diameter to wire diameter

The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Description : The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Last Answer : (D) Force required to produce unit deflection

Belleville spring can only produce linear load deflection characteristics. a) Only linear b) Linear as well as non linear c) Non-linear d) None of the mentioned

Description : Belleville spring can only produce linear load deflection characteristics. a) Only linear b) Linear as well as non linear c) Non-linear d) None of the mentioned

Last Answer : b) Linear as well as non linear

The capacity of a spring to store energy is called the spring form coefficient. Stiffness of a spring is measured by the (A) Ability to absorb shock (B) Capacity to store energy (C) Ratio of the wire & coil diameters (D) Load to produce unit deflection

Description : The capacity of a spring to store energy is called the spring form co-efficient. Stiffness of a spring is measured by the (A) Ability to absorb shock (B) Capacity to store energy (C) Ratio of the wire & coil diameters (D) Load to produce unit deflection

Last Answer : Option D

The horizontal-deflection plates are used to produce what function?

Description : The horizontal-deflection plates are used to produce what function?

Last Answer : Time and/or frequency relationships.

The horizontal-deflection plates are used to produce what function?

Description : The horizontal-deflection plates are used to produce what function?

Last Answer : Time and/or frequency relationships.

(True or False) The larger the current required to produce full-scale deflection of the meter coil, the better the sensitivity of the meter.

Description : (True or False) The larger the current required to produce full-scale deflection of the meter coil, the better the sensitivity of the meter.

Last Answer : False.

Belleville spring can only produce linear load deflection characteristics. (a) Only linear (b) Linear as well as non linear (c) Non-linear (d) None of the mentioned

Description : Belleville spring can only produce linear load deflection characteristics. (a) Only linear (b) Linear as well as non linear (c) Non-linear (d) None of the mentioned

Last Answer : (b) Linear as well as non linear

The load required to produce a unit deflection in the spring is called (a) Modulus of Rigidity (b) Spring stiffness (c) Flexural rigidity (d) Tensional rigidity

Description : The load required to produce a unit deflection in the spring is called (a) Modulus of Rigidity (b) Spring stiffness (c) Flexural rigidity (d) Tensional rigidity

Last Answer : b) Spring stiffness

The load required to produce a unit deflection in the spring is called (a) Modulus of Rigidity (b) Spring stiffness (c) Flexural rigidity (d) Tensional rigidity

Description : The load required to produce a unit deflection in the spring is called (a) Modulus of Rigidity (b) Spring stiffness (c) Flexural rigidity (d) Tensional rigidity

Last Answer : (b) Spring stiffness

The complex ion . `[M(en)Br_(2)I_(2)]^(-1)`, has two optical isomers. Their correct configurations are:

Description : The complex ion . `[M(en)Br_(2)I_(2)]^(-1)`, has two optical isomers. Their correct configurations are:

Last Answer : The complex ion . `[M(en)Br_(2)I_(2)]^(-1)`, has two optical isomers. Their correct configurations are: A. B. C. D.

Two identical conducting wires `AOB and COD` are placed at right angles to each other. The wire `AOB` carries an electric current `I_(1) and COD` carr

Description : Two identical conducting wires `AOB and COD` are placed at right angles to each other. The wire `AOB` carries an electric current `I_(1) and COD` carr

Last Answer : Two identical conducting wires `AOB and COD` are placed at right angles to each other. The wire `AOB` carries an electric ... )^(2)+I_(2)^(2))^(1//2)`

`Delta H` for the reaction, `I_((g))+I_((g))rarr I_(2(g))` will be :-

Description : `Delta H` for the reaction, `I_((g))+I_((g))rarr I_(2(g))` will be :-

Last Answer : `Delta H` for the reaction, `I_((g))+I_((g))rarr I_(2(g))` will be :- A. Zero B. `-ve` C. `+ve` D. `oo`

`I_(2)+KIrarrKI_(3)` In the above reaction :-

Description : `I_(2)+KIrarrKI_(3)` In the above reaction :-

Last Answer : `I_(2)+KIrarrKI_(3)` In the above reaction :- A. Only oxidation taken place B. Only reduction takes place C. Both the above D. None of the above

In the reaction, `I_(2)+2S_(2)O_(3)^(2-) rarr 2I^(-)+S_(4)O_(6)^(2-)`. Equivalent wieght of iodine will be equal to

Description : In the reaction, `I_(2)+2S_(2)O_(3)^(2-) rarr 2I^(-)+S_(4)O_(6)^(2-)`. Equivalent wieght of iodine will be equal to

Last Answer : In the reaction, `I_(2)+2S_(2)O_(3)^(2-) rarr 2I^(-)+S_(4)O_(6)^(2-)`. Equivalent wieght of iodine ... B. Mol. wt./2 C. Mol. wt./4 D. None of these

In the dissociation of `I_(2)(g)` at 1000 K in a container of 1 litre :- `I_(2)(g)rArr2I^(-)(g),K_(c)=10^(10)` Select the correct relation :-

Description : In the dissociation of `I_(2)(g)` at 1000 K in a container of 1 litre :- `I_(2)(g)rArr2I^(-)(g),K_(c)=10^(10)` Select the correct relation :-

Last Answer : In the dissociation of `I_(2)(g)` at 1000 K in a container of 1 litre :- `I_(2)(g)rArr2I^(-)(g),K_(c)=10^(10)` ... I^(-)]` D. `[I_(2)]=(1)/(2)[I^(-)]`

An alkene (A) `C_(16)H_(16)` on ozonolysis gives only one product (B) `C_8H_8O`. Compound (B) on reaction with NaOH/`I_(2)` yeilds sodium benzoate. Co

Description : An alkene (A) `C_(16)H_(16)` on ozonolysis gives only one product (B) `C_8H_8O`. Compound (B) on reaction with NaOH/`I_(2)` yeilds sodium benzoate. Co

Last Answer : An alkene (A) `C_(16)H_(16)` on ozonolysis gives only one product (B) `C_8H_8O`. Compound (B) ... `(H_(2)//Pd-C)` gives a racemic mixture