If two meters X and Y requires 40mA and 50mA respectively, to give full scale deflection, then:

by

1 Answer

Answer :

If two meters X and Y requires 40mA and 50mA respectively, to give full scale deflection, then: X is more sensitive

by
by
Region why x  is more sensitive

Related questions

A 0-10 A ammeter has a guaranteed accuracy of 1% of full scale deflection, the limiting error while reading

Description : A 0-10 A ammeter has a guaranteed accuracy of 1% of full scale deflection, the limiting error while reading 2.5 A will be (a) 1% (b) 2% (c) 4% (d) None of these 

Last Answer : A

A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD)

Description : A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is:

Last Answer : A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is: 0.05mA

A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying

Description : A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying a current of 50 mA. To measure current upto 100 A, we will have to connect • 10 W resistance in series • 10 W resistance in parallel • 10/1999 W resistance in series • 10/1999 W resistance in parallel

Last Answer : A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying a current of 50 mA. To measure current upto 100 A, we will have to connect 10/1999 W resistance in parallel

The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. ...

Description : The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. This is to have full deflection when 100V is measured. What is the value of series resistor to be used?

Last Answer : The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. This is to have full deflection when 100V is measured. 99.99 K ohms is the value of series resistor to be used.

The full-scale deflection current of an ammeter is 1 mA and its internal...

Description :  The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. If this meter is to have full deflection at 5A, what is the value of the shunt resistance to be used?

Last Answer :  The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. If this meter is to have full deflection at 5A, 1/49.99 ohms is the value of the shunt resistance to be used.

A galvanometer having resistance of `50 Omega` requires a current of `100 Omega A` to given full scale deflection. How much resistance is required to

Description : A galvanometer having resistance of `50 Omega` requires a current of `100 Omega A` to given full scale deflection. How much resistance is required to

Last Answer : A galvanometer having resistance of `50 Omega` requires a current of `100 Omega A` to given full scale ... in series D. `10^(5)Omega` in parallel

Two galvanometers A and B require 3 mA and 5 mA respectively to produce the same deflection of `i_(0)` division. Then

Description : Two galvanometers A and B require 3 mA and 5 mA respectively to produce the same deflection of `i_(0)` division. Then

Last Answer : Two galvanometers A and B require 3 mA and 5 mA respectively to produce the same deflection of `i_(0) ... sensitiveness of B is 5/3 times of that of A

A moving coil instrument of resistance 5 Ohm requires a potential difference of 75 mV to give a full scale...

Description : A moving coil instrument of resistance 5 Ohm requires a potential difference of 75 mV to give a full scale deflection. The value of shunt resistance needed to give a full scale deflection at 30 A is

Last Answer : A moving coil instrument of resistance 5 Ohm requires a potential difference of 75 mV to give a full scale deflection. The value of shunt resistance needed to give a full scale deflection at 30 A is 2.5 milliOhm

In a galvanometer, the deflection becomes one half when the galvanometer is shunted by a 20 ohm resistor.

Description : In a galvanometer, the deflection becomes one half when the galvanometer is shunted by a 20 ohm resistor. The galvanometer resistance is 

Last Answer : In a galvanometer, the deflection becomes one half when the galvanometer is shunted by a 20 ohm resistor. The galvanometer resistance is 10 Ohm

In a gravity controlled instrument, the deflection angle is proportional to

Last Answer :  In a gravity controlled instrument, the deflection angle is proportional to sine inverse of measurand.

In a free running oscilloscope the horizontal deflection system is driven by a ........waveform

Last Answer :  In a free running oscilloscope, the horizontal deflection system is driven by a Ramp waveform

The instrument having its deflection depends upon average value is:

Last Answer : The instrument having its deflection depends upon average value is:  Rectifier type

The deflection of hot-wire instrument depends on:

Last Answer : The deflection of hot-wire instrument depends on: RMS value of the alternating current

A sensitive galvanometer produces large deflection for a?

Last Answer : A sensitive galvanometer produces large deflection for a small value of current.

A galvanometer has a coil of resistance `100 Omega` and gives a full-scale deflection for `30 mA` current. If it is to work as a voltmeter of `30 V` r

Description : A galvanometer has a coil of resistance `100 Omega` and gives a full-scale deflection for `30 mA` current. If it is to work as a voltmeter of `30 V` r

Last Answer : A galvanometer has a coil of resistance `100 Omega` and gives a full-scale deflection for `30 mA` current. ... Omega` C. `1000 Omega` D. `1800 Omega`

A galvanometer having internal resistance `10 Omega` required `0.01` A for a full scale deflection. To convert this galvanometer to a voltmeter of ful

Description : A galvanometer having internal resistance `10 Omega` required `0.01` A for a full scale deflection. To convert this galvanometer to a voltmeter of ful

Last Answer : A galvanometer having internal resistance `10 Omega` required `0.01` A for a full scale deflection. ... Omega` in series D. `12010 Omega` in parallel

A galvanometer of resistance `50 Omega` is connected to a battery of 8 V along with a resistance of `3950 Omega` in series. A full scale deflection of

Description : A galvanometer of resistance `50 Omega` is connected to a battery of 8 V along with a resistance of `3950 Omega` in series. A full scale deflection of

Last Answer : A galvanometer of resistance `50 Omega` is connected to a battery of 8 V along with a resistance of `3950 Omega ... `. A. 1950 B. 7900 C. 2000 D. 7950

A galvanometer of resistance `50 Omega ` is connected to a battery of `3 V` along with resistance of `2950 Omega` in series. A full scale deflection o

Description : A galvanometer of resistance `50 Omega ` is connected to a battery of `3 V` along with resistance of `2950 Omega` in series. A full scale deflection o

Last Answer : A galvanometer of resistance `50 Omega ` is connected to a battery of `3 V` along with resistance of `2950 ... `Omega` C. 5550 `Omega` D. 6050 `Omega`

A milliammeter, with a full scale deflection reading of 100 milliamps, is known to have an accuracy of + or - 2%. A meter reading of 10 milliamps would indicate a line current of between _____________. A. 9.8 and 10.0 milliamperes B. 9.8 and 10.2 milliamperes C. 8.0 and 12.0 milliamperes D. 8.0 and 10.0 milliamperes

Description : A milliammeter, with a full scale deflection reading of 100 milliamps, is known to have an accuracy of + or - 2%. A meter reading of 10 milliamps would indicate a line current of between _____________. A. 9.8 ... 9.8 and 10.2 milliamperes C. 8.0 and 12.0 milliamperes D. 8.0 and 10.0 milliamperes

Last Answer : Answer: B

. A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Description : . A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Last Answer : Zero.

A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Description : A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Last Answer : Zero.

(True or False) The larger the current required to produce full-scale deflection of the meter coil, the better the sensitivity of the meter.

Description : (True or False) The larger the current required to produce full-scale deflection of the meter coil, the better the sensitivity of the meter.

Last Answer : False.

What is the typical full-scale deflection current of a moving coil instrument?

Description : What is the typical full-scale deflection current of a moving coil instrument?

Last Answer : 50mA

A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Description : A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Last Answer : False.

An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Description : An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Last Answer : 10 ohms

A galvanometer of 65 Ω resistance gives full scale deflection with 4 mA current. In order to convert it into ammeter, the range of 10 A is connected with it, the shunt resistance should be a) 0.1 Ω b) 0.2 Ω c) 0.06 Ω d) 0.03 Ω

Description : A galvanometer of 65 Ω resistance gives full scale deflection with 4 mA current. In order to convert it into ammeter, the range of 10 A is connected with it, the shunt resistance should be a) 0.1 Ω b) 0.2 Ω c) 0.06 Ω d) 0.03 Ω

Last Answer : d) 0.03 Ω

A permanent magnet moving coil instrument gives full scale deflection of 25mA when a voltage of 75mV is applied across it. Calculate: (i) Resistance of shunt required for full scale deflection of 150 A. (ii) Series resistance for full scale deflection of 500 V.

Description : A permanent magnet moving coil instrument gives full scale deflection of 25mA when a voltage of 75mV is applied across it. Calculate: (i) Resistance of shunt required for full scale deflection of 150 A. (ii) Series resistance for full scale deflection of 500 V.

Last Answer : Answer :

A single phase wattmeter rated for 500 V; 5A is having full scale deflection of 1000 watt. What is multiplying factor of the wattmeter?

Description : A single phase wattmeter rated for 500 V; 5A is having full scale deflection of 1000 watt. What is multiplying factor of the wattmeter?

Last Answer : Answer :

A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up

Description : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is (A) 9997 Ω (B) 10000 Ω (C) 997 Ω (D) 10003 Ω

Last Answer : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is 9997 Ω

If an instrument has cramped scale for larger values, then it follows?

Last Answer : If an instrument has cramped scale for larger values, then it follows logarithmic law.

A digital voltmeter has a read-out range from 0 to 9999 counts. When full scale reading is 9.999 V, the

Description : A digital voltmeter has a read-out range from 0 to 9999 counts. When full scale reading is 9.999 V, the resolution of the instrument will be (a) 100 mV (b) 99 mV (c) 9 mV (d) 1 mV 

Last Answer : d) 1mV 9.999v÷9999v

A 12 bit counter type A/D converter uses a 1 MHz clock. If the full scale output is +10V, its resolution output is

Last Answer : A 12 bit counter type A/D converter uses a 1 MHz clock. If the full scale output is +10V, its resolution output is 2.44mV.

A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale...

Description : A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale reading. The voltage measured by the instrument is 83V. The percentage limiting error is

Last Answer : A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale reading. The voltage measured by the instrument is 83V. The percentage limiting error is 4.85%.

The ratio of maximum displacement deviation to full scale deviation of the instrument is called?

Description : The ratio of maximum displacement deviation to full scale deviation of the instrument is called?

Last Answer : The ratio of maximum displacement deviation to full scale deviation of the instrument is called linearity.

Digital meters are superior over analogue meters because

Description : Digital meters are superior over analogue meters because (A) less expensive (B) output reading is binary in nature (C) output impedance is less (D) installation is easy as panel meters 

Last Answer : Digital metres are superior over analogue metres because output reading is binary in nature and digital metres have various advantages over analogue metres in digital metres we can see the exact precise ... direction but if analogue meter rotate or move in any direction it may give error value

Induction watt-hour meters are free from

Description : Induction watt-hour meters are free from (a) phase (b) creeping (c) temperature (d) frequency

Last Answer : b

Light load adjustments for induction type energy meters are usually done at

Description : Light load adjustments for induction type energy meters are usually done at   (a) 10% of full load current (b) 5% of full load current (c) 50% of full load current (d) 1% of full load current 

Last Answer : Light load adjustments for induction type energy meters are usually done at 5% of full load current

In moving coil meters, damping is provided by

Last Answer : In moving coil meters, damping is provided by eddy current disk.

Most common form of A.C. meters met with in every day domestic and industrial installations are?

Last Answer : Most common form of A.C. meters met with in every day domestic and industrial installations are induction type single phase energy meters.

Induction type single phase energy meters measure electric energy in?

Last Answer : Induction type single phase energy meters measure electric energy in kWh.

The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is (A) 18° 15' E (B) 18° 15' N (C) 18° 15' W (D) 18° 15' L

Description : The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is (A) 18° 15' E (B) 18° 15' N (C) 18° 15' W (D) 18° 15' L

Last Answer : (D) 18° 15' L

A man picks up a 50 kilogram block and carries it up a flight of stairs 10 meters high. He then carries the block back down the stairs and places the block in its original position. What is the NET work done on the block? w) 1,000 joules x) 750 joules y) 500 joules z) 0 joules

Description : A man picks up a 50 kilogram block and carries it up a flight of stairs 10 meters high. He then carries the block back down the stairs and places the block in its original position. What is the NET work done on the block? w) 1,000 joules x) 750 joules y) 500 joules z) 0 joules

Last Answer : ANSWER: Z -- 0 JOULES

A girl throws a 0.1 kilogram ball at a wall. The ball hits the wall perpendicularly with a velocity of 5 meters per second and then bounces straight back with a velocity of 4 meters per second. The change in the momentum of the ball is: w) 0.1 kilogram-meters per second x) 0.4 kilogram-meters per second y) 0.5 kilogram-meters per second z) 0.9 kilogram-meters per second

Description : A girl throws a 0.1 kilogram ball at a wall. The ball hits the wall perpendicularly with a velocity of 5 meters per second and then bounces straight back with a velocity of 4 meters per second. The ... .4 kilogram-meters per second y) 0.5 kilogram-meters per second z) 0.9 kilogram-meters per second

Last Answer : ANSWER: Z -- 0.9 KILOGRAM-METERS PER SECOND 

Find total number coils in a spring having square and ground ends. Deflection in the spring is 6mm when load of 1100N is applied. Modulus of rigidity is 81370N/mm². Wire diameter and pitch circle diameter are 10mm and 50mm respectively. a) 7 b) 6 c) 5 d) 4

Description : Find total number coils in a spring having square and ground ends. Deflection in the spring is 6mm when load of 1100N is applied. Modulus of rigidity is 81370N/mm². Wire diameter and pitch circle diameter are 10mm and 50mm respectively. a) 7 b) 6 c) 5 d) 4

Last Answer : a) 7

A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned

Description : A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is

Last Answer : A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is 200µNm

A moving coil instrument is used as an ohmmeter. The indicating scale of the meter will be

Last Answer : A moving coil instrument is used as an ohmmeter. The indicating scale of the meter will be Hyperbolic.

PMMC instrument gives uniform scale because:

Description : PMMC instrument gives uniform scale because:

Last Answer : PMMC instrument gives uniform scale because: It uses spring control and The deflection torque is proportional to the instrument current.

In which part of the scale does the pointer indicate more accurately

Last Answer :  In about middle of the scale

The gravity controlled instrument has crowded scale because current is proportional to?

Last Answer : The gravity controlled instrument has crowded scale because current is proportional to sine of deflection angle.

The scale of a rectifier instrument is?

Last Answer : The scale of a rectifier instrument is linear.