A vessel contains water up to a height of 20 cm and above it an oil up to another 20 cm. The refractive indices of the water and the oil are 1.33 and

1 Answer

Answer :

A vessel contains water up to a height of 20 cm and above it an oil up to another 20 cm. ... the apparent depth of the vessel when viewed from above.

Related questions

Description : Calculate the ratio of sine of incident angle to the sine of reflected angle when the refractive indices of medium 1 and 2 are given as 2.33 and 1.66 respectively. a) 0.71 b) 1.4 c) 2 d) 3.99

Last Answer : a) 0.71

Description : The refractive indices of four media A, B, C and D are given in the following table: light-reflection-and-refraction-chapter-wise-important-questions-class-10-science-9 If light, travels from one medium to another, in which case the change in speed will be (i) minimum, (ii) maximum? -Physics

Last Answer : (i) Minimum change is seen as light moves between 1.50 and 1.52, i.e. B and C. (ii) Maximum change when light moves between 1.33 and 2.40, i.e. A and D.

Description : A cylindrical vessel of diameter 12 cm contains `800picm^(3)` of water. A cylindrical glass piece of diameter `8.0cm` and height ``8.0 cm is placed in

Last Answer : A cylindrical vessel of diameter 12 cm contains `800picm^(3)` of water. A cylindrical glass piece of diameter ... is 1.50 and that of water is 1.33.

Description : 5. The refractive indices of four media A, B, C and D are given in the following table: -Chemistry-10

Last Answer : (i) Minimum change is seen as light moves between 1.50 and 1.52, i.e. B and C. (ii) Maximum change when light moves between 1.33 and 2.40, i.e. A and D.

Description : Two thin slabs of refractive indices `mu_(1)` and `mu_(2)` are placed parallel to each other in the x-z plane. If the direction of propagation of a ra

Last Answer : Two thin slabs of refractive indices `mu_(1)` and `mu_(2)` are placed parallel to each other in the x-z plane. If ... )+d^(2))` D. `mu_(1) b=mu_(2)a`

Description : The refractive indices of crown glass for violet and red colours are respectively 1.523 and 1.513. Determine the dispersive power of this glass. If a

Last Answer : The refractive indices of crown glass for violet and red colours are respectively 1.523 and 1.513. ... (@)`, what will be the angular dispersion ?

Description : The refractive indices for lights of violet, yellow and red colours for a flint glass prism are respectively 1.632, 1.620 and 1.613. Find the dispersi

Last Answer : The refractive indices for lights of violet, yellow and red colours for a flint glass prism are ... Find the dispersive power of the prism material.

Description : White light is passed through a prism of `5^(@)`. If refractive indices for red and blue rays are `1.641 and 1.659` respectively, calculate the angula

Last Answer : White light is passed through a prism of `5^(@)`. If refractive indices for red and ... respectively, calculate the angular dispersion of the prism.

Description : What do you call the reflection of a part of incident light at the interface of two media that have different refractive indices? A. Snell’s reflection B. Fresnel reflection C. Lambertian reflection D. Huygen’s reflection

Last Answer : B. Fresnel reflection

Description : The angle of incidence of a wave of a wave with angle of transmission 45 degree and the refractive indices of the two media given by 2 and 1.3 is a) 41.68 b) 61.86 c) 12.23 d) 27.89

Last Answer : a) 41.68

Description : The critical angle for two media of refractive indices of medium 1 and 2 given by 2 and 1 respectively is a) 0 b) 30 c) 45 d) 60

Last Answer : b) 30

Description : An Electromagnetic wave falls on to a boundary between two losses less homogeneous media with different refractive indices, a part of the wave is reflected back to the incident medium and the rest is transmitted ... A) Fresnel reflection (B) Fresnel refraction (C) Snell's law (D) None of these

Last Answer : Answer: Option A

Description : What should be the relation between refractive indices for antireflection coating made over a glass surface? A. Bair > Bfilm > Bglass B. Bair < Bfilm < Bglass C. Bair > Bfilm < Bglass D. Bair < Bfilm > Bglass

Last Answer : B. Bair < Bfilm < Bglass

Description : The speed of light in material A is 1.25 times as large as it is in material B. What is the ratio of the refractive indices, µA /µB of these materials? A.1.50 B.1.00 C.0.800 D.1.25

Last Answer : D.1.25

Description : The numerical aperture of a coaxial cable with core and cladding indices given by 2.33 and 1.4 respectively is a) 3.73 b) 0.83 c) 3.46 d) 1.86

Last Answer : d) 1.86

Description : Find the area of the sheet required to make closed cylindrical vessel of height 1 m and diameter 140 cm. -Maths 9th

Last Answer : Required sheet = T.S.A. of cyclinder = 2πr (h+r) = 2 × 22 / 7 × 70 / 100(1 + 70 / 100) = 2 × 22 × 0.1 × 1.7 = 7.48 m2

Description : Find the capacity in litres of a conical vessel having height 8 cm and slant height 10 cm. -Maths 9th

Last Answer : Height of conical vessel (h) = 8 cm Slant height of conical vessel (l) = 10 cm ∴ r2 + h2 = l2 r2 + 82 = 102 r2 = 100 - 64 = 36 r = 6 cm Now, volume of conical vessel = 1 / 3 πr2h = 1 / 3 × 22 / 7 × 6 × 6 × 8 = 301.71 cm3 = 0.30171 litre

Description : Find the area of the sheet required to make closed cylindrical vessel of height 1 m and diameter 140 cm. -Maths 9th

Last Answer : Required sheet = T.S.A. of cyclinder = 2πr (h+r) = 2 × 22 / 7 × 70 / 100(1 + 70 / 100) = 2 × 22 × 0.1 × 1.7 = 7.48 m2

Description : Find the capacity in litres of a conical vessel having height 8 cm and slant height 10 cm. -Maths 9th

Last Answer : Height of conical vessel (h) = 8 cm Slant height of conical vessel (l) = 10 cm ∴ r2 + h2 = l2 r2 + 82 = 102 r2 = 100 - 64 = 36 r = 6 cm Now, volume of conical vessel = 1 / 3 πr2h = 1 / 3 × 22 / 7 × 6 × 6 × 8 = 301.71 cm3 = 0.30171 litre

Description : The refractive index of water will be a) 1 b) 2.66 c) 5 d) 1.33

Last Answer : d) 1.33

Description : Pick out the correct statement. (A) Angle of repose is always greater than the angle of slide (B) A hopper is a small bin with a sloping bottom (C) A silo is a short height ... used as a 'modifying agent' (for activating or depressing the adsorption of filming agents) in froth floatation process

Last Answer : (B) A hopper is a small bin with a sloping bottom

Description : The radii of curvature of each surface of a convex lens is `20 cm` and the refractive index of the material of the lens is `3//2` (i) Calculate its fo

Last Answer : The radii of curvature of each surface of a convex lens is `20 cm` and the refractive index of the ... What happens if the lens is cut along `CD` ?

Description : The focal length of a plano-convex lens is 20 cm in air. Refractive index of glass is 1.5. Calculate (i) the radius of curvature of lens surface and (

Last Answer : The focal length of a plano-convex lens is 20 cm in air. Refractive index of glass is 1.5. ... length when immersed in liquid of refractive index 1.6

Description : A convex surface of radiys of curvature 20 cm separates air from glass of refractive index 1.5. Find the position and the nature of the image of a sma

Last Answer : A convex surface of radiys of curvature 20 cm separates air from glass of refractive index 1.5. Find ... at 50 cm in front of the convex surface.

Description : What is the refractive index of sound 1.33?

Last Answer : The refractive index of sound through water is 1.33 .

Description : The refractive index of medium A is 1.5 and that of medium B is 1.33. If the speed of light in air is 3 x 108 m/s, what is the speed of light in medium A and B respectively? (a) 2 x 108 m/s and 1.33 x 108 m/s (b) 1.33 ... 108 m/s (c) 2.25 x 108 m/s and 2 x 108 m/s (d) 2 x 108 m/s and 2.25 x 108 m/s

Last Answer : (d) 2 x 108 m/s and 2.25 x 108 m/s

Description : A ray of light starting from air passes through medium A of refractive index 1.50, enters medium B of refractive index 1.33 and finally enters medium C of refractive index 2.42. If this ray emerges out in air from C, then ... of media the bending of light least? (a) air-A (b) A-B (c) B-C (d) C-air

Last Answer : Answer : (b)

Description : The refractive index is 2.33 and the critical angle is 350. Find the numerical aperture. a) 2 b) 1.9 c) 2.33 d) 12

Last Answer : b) 1.9

Description : A vessel of 4 m3 contains oil which weighs 30 kN. The specific weight of the oil is (A) 4.5 kN/m3 (B) 6 kN/m3 (C) 7.5 kN/m3 (D) 10 kN/m3

Last Answer : Answer: Option C

Description : A chemical reaction, A → 3B, is conducted in a constant pressure vessel. Starting with pure A, the volume of the reaction mixture increases 3 times in 6 minutes. The fractional conversion is (A) 0.33 (B) 0.5 (C) 1 (D) Data insufficient, can't be predicted

Last Answer : (C) 1

Description : In Fig. a plane mirror lies at a height h above the bottom of a beaker containingwater (refractive index `mu`) upto a height f. Find the position of t

Last Answer : In Fig. a plane mirror lies at a height h above the bottom of a beaker containingwater (refractive index ... f. Find the position of the image of the

Description : What condition occur when the refractive index of the air decreases with height much more rapidly the normal? A. Refraction B. Superrefraction C. Subrefraction D. Diffraction

Last Answer : B. Superrefraction

Description : The two surfaces of a double concave lens are of curvature 10 cm and 40 cm. Find the focal length of the lens in water. The refractive index of water

Last Answer : The two surfaces of a double concave lens are of curvature 10 cm and 40 cm. Find the focal length of ... and that of the lens of the material is 3/2.

Description : The radii of curvature of a double convex lens are 30 cm and 60 cm and its refractive index is 1.5. calculate its focal length.

Last Answer : The radii of curvature of a double convex lens are 30 cm and 60 cm and its refractive index is 1.5. calculate its focal length.

Description : The human lens: a. has a higher refractive index in the nucleus than the cortex b. contains a higher potassium concentration than the aqueous c. contains a higher concentration of sorbitol in diabetic patient than normal population d. all above

Last Answer : all above

Description : The cornea: a. is thicker centrally than peripherally b. contains 10,000 endothelium cells per square mm at birth c.has an acellular collagenous stroma d. contain Descemet's membrane is produced by the endothelium e. has a refractive index of 1.38

Last Answer : contain Descemet's membrane is produced by the endothelium

Description : The oil is leaking from a drum at a rate of `16 cm^(3)//sec`. If the radius and height of drum are 7 cm and 60 cm respectively, find the rate of chang

Last Answer : The oil is leaking from a drum at a rate of `16 cm^(3)//sec`. If the radius and height of drum ... height of oil when height of oil in drum is 18 cm.

Description : A cylindrical container of height 14 m and base 12 m contains oil. The oil is to be transferred to one cylindrical can, -Maths 9th

Last Answer : answer:

Description : (A) Use two digits to make the smallest possible positve intiger.(B) Five 3s can express 37: 37=33+3+3/3Find another way to do it.(C) Use six identical dgits to make 100. (Several solutions are possible.)(D) Use five 4s to make 55.(E) Use four 9s to make 20. -Riddles

Last Answer : (A) 1 X 1; 1/1;2/2;ect....;1-0;2-1;and many others. (B) 37=333/3X3; 37=3 X 3 X 3 + 3/.3 (C) 99 + 99/99; 55+55- 5- 5; (666-66)/6 (D) 44 + 44/4=55. (E) 9 + 99/9=20.

Description : I am considering a vessel sink that is 7 inches tall. What height vanity would I use I want to repurpose an antique dresser I have. Possible ?

Last Answer : Normally a vanity is 32" high. However if you are tall and don't want to bend down much when you wash your face, you can make it a kitchen counter height which is 36". So basically 32" - 36" ... cut part of the drawers to make room for Plumbing and find a piece of counter top to protect the wood.

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : (2) Surface area of the bottom of the vessel Explanation: The pressure exerted by a static fluid depends only upon the depth of the fluid, the density of the fluid, and the acceleration of gravity. Static fluid pressure does not depend on the shape, total mass, or surface area of the liquid.

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : (2) Surface area of the bottom of the vessel Explanation: The pressure exerted by a static fluid depends only upon the depth of the fluid, the density of the fluid, and the acceleration of gravity.

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : Surface area of the bottom of the vessel

Description : (a) Define industrial clusters. (b) State any two indices used to identify industrial clusters. -Geography

Last Answer : (a) Industrial clusters are groups of interrelated industries that drive wealth creation in a region, primarily through export of goods and services. (b) The two indices are : 1. Quantum of power used for 2. Total Industrial Output.

Description : What are industrial clusters ? State any two indices used to identify industrial clusters. -Geography

Last Answer : Industrial Cluster: Industries are unevenly distributed in India because the factors affecting industrial location are not same everywhere. Industries tend to be concentrated in a few pockets because of ... factory employment/No. of workers. 2. Quantum of power used for industrial purposes.

Description : Write the two important indices which are used by the UNDP to measure human development. -Geography

Last Answer : (i) The Human Development index. (ii) Human Poverty index

Description : Python : How to find the indices of a particular element in a numpy array -Web-Development

Last Answer : answer:

Description : Python: How to get the indices of several elements in a list or numpy array at once? -Web-Development

Last Answer : answer:

Description : Python : How to find the indices of elements in a sublist in a list or numpy array -Web-Development

Last Answer : answer:

Description : TypeError: slice indices must be integers or None or have an __index__ method (Python) -Web-Development

Last Answer : answer: