Description : The deviation caused for red, yellow and violet colours for crown glass prism are `2.84^(@),3.28^(@)` and `3.72^(@)` respectively. The dispersive powe
Last Answer : The deviation caused for red, yellow and violet colours for crown glass prism are `2.84^( ... respectively. The dispersive power of prism material is:
Description : The refractive indices for lights of violet, yellow and red colours for a flint glass prism are respectively 1.632, 1.620 and 1.613. Find the dispersi
Last Answer : The refractive indices for lights of violet, yellow and red colours for a flint glass prism are ... Find the dispersive power of the prism material.
Description : In a certain spectrum produced by a glass prism of dispersive power `0.0305,` it is found that the refractive index for the red ray is `1.645.`and tha
Last Answer : In a certain spectrum produced by a glass prism of dispersive power `0.0305,` it is found that ... . What is the refractive index for the yellow ray?
Description : White light is passed through a prism of `5^(@)`. If refractive indices for red and blue rays are `1.641 and 1.659` respectively, calculate the angula
Last Answer : White light is passed through a prism of `5^(@)`. If refractive indices for red and ... respectively, calculate the angular dispersion of the prism.
Description : The critical angle for two media of refractive indices of medium 1 and 2 given by 2 and 1 respectively is a) 0 b) 30 c) 45 d) 60
Last Answer : b) 30
Description : Calculate the ratio of sine of incident angle to the sine of reflected angle when the refractive indices of medium 1 and 2 are given as 2.33 and 1.66 respectively. a) 0.71 b) 1.4 c) 2 d) 3.99
Last Answer : a) 0.71
Description : What should be the relation between refractive indices for antireflection coating made over a glass surface? A. Bair > Bfilm > Bglass B. Bair < Bfilm < Bglass C. Bair > Bfilm < Bglass D. Bair < Bfilm > Bglass
Last Answer : B. Bair < Bfilm < Bglass
Description : Which of the following colours has got the maximum refractive index for glass? (1) Blue (2) Green (3) Red (4) Indigo
Last Answer : (3) Red
Description : Assertion (A) :Sunlight reaches us without dispersion in the form of white light and not as a component. Reason(R) : Dispersion takes place due to variation of refractive index for different wavelength but in vaccum the speed of ... of A. (c) A is true but R is false. (d) A is false but R is true.
Last Answer : (a) Both A and R are true and R is the correct explanation of A.
Description : Lights of different colours are arranged below in order of increasing wavelengths: 1. Violet, indigo, blue 2. Green, orange, red 3. Red, green, indigo 4. Blue, green, yellow Which of the above are in proper sequence? (a) 1 only (b) 1 and 2 (c) 2 and 3 (d) 1 and 4
Last Answer : Ans:(d)
Description : The image shows the dispersion of the white light in the prism. What will be the colours of the X, Y and Z? (a) X: red; Y: green; Z: violet (b) X: violet; Y: green; Z: red (c) X: green; Y: violet; Z: red (d) X: red; Y: violet; Z: green
Last Answer : (b) X: violet; Y: green; Z: red
Description : 5. The refractive indices of four media A, B, C and D are given in the following table: -Chemistry-10
Last Answer : (i) Minimum change is seen as light moves between 1.50 and 1.52, i.e. B and C. (ii) Maximum change when light moves between 1.33 and 2.40, i.e. A and D.
Description : The refractive indices of four media A, B, C and D are given in the following table: light-reflection-and-refraction-chapter-wise-important-questions-class-10-science-9 If light, travels from one medium to another, in which case the change in speed will be (i) minimum, (ii) maximum? -Physics
Description : Two thin slabs of refractive indices `mu_(1)` and `mu_(2)` are placed parallel to each other in the x-z plane. If the direction of propagation of a ra
Last Answer : Two thin slabs of refractive indices `mu_(1)` and `mu_(2)` are placed parallel to each other in the x-z plane. If ... )+d^(2))` D. `mu_(1) b=mu_(2)a`
Description : A vessel contains water up to a height of 20 cm and above it an oil up to another 20 cm. The refractive indices of the water and the oil are 1.33 and
Last Answer : A vessel contains water up to a height of 20 cm and above it an oil up to another 20 cm. ... the apparent depth of the vessel when viewed from above.
Description : What do you call the reflection of a part of incident light at the interface of two media that have different refractive indices? A. Snell’s reflection B. Fresnel reflection C. Lambertian reflection D. Huygen’s reflection
Last Answer : B. Fresnel reflection
Description : The angle of incidence of a wave of a wave with angle of transmission 45 degree and the refractive indices of the two media given by 2 and 1.3 is a) 41.68 b) 61.86 c) 12.23 d) 27.89
Last Answer : a) 41.68
Description : An Electromagnetic wave falls on to a boundary between two losses less homogeneous media with different refractive indices, a part of the wave is reflected back to the incident medium and the rest is transmitted ... A) Fresnel reflection (B) Fresnel refraction (C) Snell's law (D) None of these
Last Answer : Answer: Option A
Description : The speed of light in material A is 1.25 times as large as it is in material B. What is the ratio of the refractive indices, µA /µB of these materials? A.1.50 B.1.00 C.0.800 D.1.25
Last Answer : D.1.25
Description : Find the value of (513) to the whole square - (512) to the whole square. -Maths 9th
Last Answer : Solution :-
Description : A bowl contains 8 violet, 6 purple and 4 magenta balls. Three balls are drawn at random. Find out the number of ways of selecting the balls of different colours? A) 362 B) 2 48 C) 122 D) 192
Last Answer : Answer: D) 1 violet ball can be selected is 8C1 ways. 1 purple ball can be selected in 6C1 ways. 1 magenta ball can be selected in 4C1 ways. Total number of ways = 8C1 × 6C1 × 4C1 = 8×6×4 = 192
Description : Pick up the correct statement from the following: (A) The refractive index of a medium varies according to the wavelength of the radiation, (B) The variation of the refractive index with wave length, ... of white light by passing through a prism is caused due to dispersion (D) All of these
Last Answer : Answer: Option D
Description : The numerical aperture of a coaxial cable with core and cladding indices given by 2.33 and 1.4 respectively is a) 3.73 b) 0.83 c) 3.46 d) 1.86
Last Answer : d) 1.86
Description : Which of these travels in glass with minimum velocity? (1) red light (2) violet light (3) green light (4) yellow light
Last Answer : (2) violet light Explanation: Red light has a longer wavelength than violet light and the other colours of visible light have intermediate wavelengths. As light passes from air into glass, there is ... and is refracted the least, while violet waves travel the slowest and is refracted the most.
Description : When white light passes through a glass prism we get a spectrum on the other side of the prism. In the emergent beam the ray which is deviated least is - (1) the violet ray (2) the red ray (3) the green ray (4) the blue ray
Last Answer : (2) the red ray Explanation: Red is deviated the least and violet the most.
Description : Which of the following coloured light has the least speed in glass prism? (a) Violet (b) Yellow (c) Red (d) Green
Last Answer : (a) Violet
Description : In refraction that occurs in air/glass interfaces, among the visible light, which is the bent the least? ∙ A. violet ∙ B. blue ∙ C. red ∙ D. orange
Last Answer : C. red
Description : In refraction that occurs in air/glass interfaces, among the visible light, which is bent the most? ∙ A. red ∙ B. violet ∙ C. yellow ∙ D. green
Last Answer : ∙ B. violet
Description : Which of these travels in glass with minimum velocity ? (1) red light (2) violet light (3) green light (4) yellow light
Last Answer : violet light
Description : X-ray crystallographic analysis of an optically active compound determines its (A) Optical rotatory dispersive power (B) Absolute configuration (C) Relative configuration (D) Optical purity
Last Answer : (B) Absolute configuration
Description : A tachometer is a device used to measure (1) gravitational pull (2) speed of rotation (3) surface tension (4) dispersive power
Last Answer : speed of rotation
Description : How do you express 0.523 as a percent?
Last Answer : 0.523
Description : How do you convert 523 pennies into dollars?
Last Answer : 5.23
Description : What is 573.523 in word form?
Last Answer : aa
Description : When a voltage of 124 VDC is applied to the illustrated circuit with a resistance of 237 ohms the current will be ________. EL-0018 A. 1.523 amps B. 1.911 amps C. 361 milliamps D. 523.2 milliamps
Last Answer : Answer: D
Description : Method of DNA replication in which two strands of DNA separate and synthesise new strands is called (a) dispersive (b) conservative (c) semi-conservative (d) non conservative
Last Answer : (a) dispersive
Description : For a fixed beam with UDL,point of contraflexure is a.0.211L or 0.789L b. 0.365 L or 0.635 L c. 0.177 L or 0.823 L d.0.477 L or 0.523 L
Last Answer : a.0.211L or 0.789L
Description : Flint glass (A) Has slightly the greater refracting power than crown glass (B) Has roughly double refracting power than that of crown (C) And crown glass proportions yield the required focal length ... dispersion produced by the convex lens at the emergence from the concave (D) All the above
Last Answer : (D) All the above
Description : The power of a thin convex lens of glass is `5 dioptre`. When it is immersed in a liquid of refractive index `mu`, it behave like a diverging lens of
Last Answer : The power of a thin convex lens of glass is `5 dioptre`. When it is immersed in a liquid of refractive index ... liquid, if `mu` of glass `= 3//2`.
Description : In a filament type light bulb most of the electric power consumed appears as – (1) visible light (2) infra-red rays (3) ultra-violet rays (4) fluorescent light
Last Answer : (2) infra-red rays Explanation: When electricity is passed through the filament, the filament gets hot. Depending on the temperature of the filament, radiation is emitted from the filament. The ... energy converts into visible light and rest of it is emitted as heat or infrared radiation.
Description : In a filament type light bulb most of the electric power consumed appears as (1) visible light (2) infra-red rays (3) ultra-violet rays (4) fluorescent light
Last Answer : infra-red rays
Description : The refractive index of medium A is 1.5 and that of medium B is 1.33. If the speed of light in air is 3 x 108 m/s, what is the speed of light in medium A and B respectively? (a) 2 x 108 m/s and 1.33 x 108 m/s (b) 1.33 ... 108 m/s (c) 2.25 x 108 m/s and 2 x 108 m/s (d) 2 x 108 m/s and 2.25 x 108 m/s
Last Answer : (d) 2 x 108 m/s and 2.25 x 108 m/s
Description : Find the ratio of the refractive index of medium 1 to that of medium 2, when the incident and reflected angles are given by 300 and 450 respectively. a) 0.5 b) 1 c) 2 d) 4
Last Answer : c) 2
Description : Multimode step-index fibers have a core and cladding of constant refractive index n1 and n2, respectively. Which refractive index, the core or cladding, is lower?
Last Answer : Cladding.
Description : Anti mist and ultra violet ray glass coating?
Last Answer : answer:Most glass by it's very nature blocks ~90% of UV B but only ~10% of UV A. A special coating can block a little more UV B and a lot more UV A, but there is a big difference between UV ... to keep condensation from forming on the glass. Anti-mist? Do you mean anti-fog? Think of it as Rain-X.
Description : Substance used to give violet colour to glass?
Last Answer : Manganese dioxide
Description : Pick out the wrong statement pertaining to 'green house' for the plants. (A) 'Green house' (made of glass) allows visible sunlight (i.e., short wavelength solar radiation like ultra-violet rays) ... ' thereby warming up the earth's surface (D) 'Green house' is colder than the outside atmosphere
Last Answer : (D) 'Green house' is colder than the outside atmosphere
Description : When white light passes through a glass prism, it gets dispersed into colours because (a) glass imparts colours to the light (b) different colours have different speeds in glass (c) interference of light occurs (d) diffraction of light occurs
Last Answer : Ans:(b)
Description : Which of the following is used to split white light into different colours? (1) Glass slab (2) Convex lens (3) Concave lens (4) Prism
Last Answer : (4) Prism Explanation: In optics, a prism is a transparent optical element with flat, polished surfaces that refract light. At least two of the flat surfaces must have an angle between them. The ... a triangular base and rectangular sides, and in colloquial use "prism" usually refers to this type.