Which gas is filled in element bulbs/tubes?

1 Answer

Answer :

Which gas is filled in element bulbs/tubes? A. Ar B. `N_(2)` C. He D. `O_(2)`

Related questions

Description : What are two advantages that gas-filled tubes have over conventional electron tubes?

Last Answer : a. They can carry more current. b. They maintain a constant IR drop across the tube

Description : Which gas is filled in electric bulbs?

Last Answer : Argon

Description : The gas filled in electric bulbs?

Last Answer : Argon

Description : To preserve the filaments at high temprature, which gas is filled in the electric bulbs?

Last Answer : Argon.

Description : A dumper is filled in 15hrs by 3 tubes P,Q,and R. the tube R is thrice as fast as Q and Q is thrice as fast as P. How much time will tube Q alone take to fill the tank? A) 195hrs B) 190hrs C) 185hrs D) 180hrs

Last Answer : A Suppose tube P alone takes x hrs to fill the tank Then tubes Q and R will take x/3 and x/9 hrs respectively to fill the dumper. Therefore 1/x + 3/x+ 9/x = 1/15 13x = 1/15 X = 195 hrs

Description : A tube can fill a cistern in 18hrs.After half the cistern is filled, three more similar tubes are opened. What is the total time taken to fill the cistern completely ? A) 9hrs 52min B) 10hrs 15 min C) 9hrs 45 min D) 10hrs 30min

Last Answer : Time taken to fill half of the cistern = 18/2 = 9 hrs After half the cistern is filled , three more similar tubes are opened. We know that one tube can in 18 hrs can fill = V litres(i.e. fully fill a cistern) ... V/2 will be 2 hrs 15 min Total time = 9 hrs + 2 hrs + 15 min = 11 hrs 15 min

Description : Electric bulbs are filled with – (1) Nitrogen (2) Carbon dioxide (3) Argon (4) Oxygen

Last Answer : (3) Argon Explanation: Argon is produced industrially by the fractional distillation of liquid air. Argon is mostly used as an inert shielding has in welding and other high-temperature industrial processes ... , and other types of gas discharge tubes. Argon makes a distinctive blue-green gas laser.

Description : Electric bulbs are filled with : (1) Nitrogen (2) Carbon dioxide (3) Argon (4) Oxygen

Last Answer : Argon

Description : Beam-forming tubes and power tubes are similar except that power pentodes lack what element?

Last Answer : Beam-forming plates.

Description : I will be describing a chemical element. Try to identify it with the fewest number of clues. This chemical element is the most abundant of the rare-earth group. The element is a silver-gray metal ... factor in color television tubes. The atomic number of this element is 58. What is this element?

Last Answer : ANSWER: CERIUM (Ce)

Description : An inert element has electron shells that a. Overlap The Shells Of Other Atoms. b. Are Completely Filled With Electrons. c. Yield Hydrogen Ions. d. Form Covalent Bonds.

Last Answer : b. Are Completely Filled With Electrons.

Description : Why is the amount of gas collected in one of the test tubes in text book Activity 1.7 (i.e., electrolysis of water) double of the amount collected in the other? Name this gas. -Chemistry-10

Last Answer : In Activity 1.7, water is electrolysed to give H2 gas at one electrode and O2 gas at the other electrode. 2H2O(l) → 2H2(g) + O2(g) Thus two molecules of water on electrolysis give two ... oxygen gas or in other words the amount of hydrogen gas collected would be double than that of oxygen gas.

Description : What is the name of the gas used to fill in vehicle tyre tubes?

Last Answer : The normal compressed air used to inflate tyres contains 78% nitrogen, 21% oxygen and 1% other gases but some specialists are now offering inflate tyres with pure nitrogen. Nitrogen is used for less corrosion- because unlike air there's no moisture in pure nitrogen.

Description : Due to its excellent permeability to air/gas and oxidation resistance, the tubes of automobile tyres is made of (A) Cold SBR (B) Butyl rubber (C) Bunai N (D) Buna S

Last Answer : (B) Butyl rubber

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Description : The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the (A) Water alkalinity & leakage (B) Hydrazine addition during ... treatment (C) Release of non-condensable gas from water in the boiler (D) Scale formation

Last Answer : (C) Release of non-condensable gas from water in the boiler

Description : Is there a quick rule-of-thumb to estimate a gas side heat-transfer rate inside the tubes of a shell and tube heat exchanger?

Last Answer : If you need to estimate a gas heat transfer rate or see if a program is getting a reasonable gas rate, use the following: h = 75 X Sq. Root(Op. pressure/100) The operating pressure is ... will be lower for the shell side or if there is more than one exchanger. Source: Gulley Computer Associates

Description : Which gas is used in ordinary electric bulbs ?

Last Answer : Nitrogen gas is used in ordinary electric bulbs.

Description : Matrix Matching. `{:("List-I","List-II"),((A) "Gas Thermometers",(p) He),((B) "Beacon lamp", (q) Ne),((C ) "Electric bulbs",(r ) Xe),((D) "Flash bulb"

Last Answer : Matrix Matching. `{:("List-I","List-II"),((A) "Gas Thermometers",(p) He),((B) "Beacon lamp", (q) Ne),((C ... ",(r ) Xe),((D) "Flash bulb", (s) Kr):}`

Description : Which gas is used in filling electric bulbs - (1) Neon (2) Argon (3) Krypton (4) Radon

Last Answer : (2) Argon Explanation: Argon is used to fill incandescent light bulbs to inhibit the evaporation of the tungsten filaments and increase bulb life.

Description : Given a specific mylar bladder filled with helium,if I continue to add more gas [pressure] would the vessel lift more weight than its previous lifting strength?

Last Answer : answer:You do realize that Mylar balloons are not a unibody construction? They have seams which are heat sealed only and not impervious to bursting from too much pressure. You'd be better off with latex balloons. ... balloon boy hoax that nutjob cooked up a few years ago? That's what he used :)

Description : Have you ever heard of someone getting a cavity filled at the dentist, using NO anesthesia or gas, nothing at all?

Last Answer : I had a filling once when I was in my teens without pain relief in a bid to impress the dental nurse. It was the stupidest decision I ever made and it hurt like hell!

Description : A 3.2 m diameter balloon is filled with Helium. The total weight of balloon, gas and pay load is 10 kg kg. In an isothermal atmosphere having conditions identical to N.T.P. the balloon will rise to a height of about a.6000 m b.1500 m c.3000 m d.2000 m e.1000 m

Last Answer : a. 6000 m

Description : One day, you woke up in a place you havent seen before. There, you saw three rooms, all bring you to the exit. But, on those rooms, there were notes. It said: 1: room is filled with poison ... choose one of the three. Which room would be the way that could get you out without being harmed? -Riddles

Last Answer : 2. Because if the lions hadn't eaten for five years, they would be dead.

Description : Balloons are filled with which gas? -Do You Know?

Last Answer : answer:

Description : Which gas is filled in the tires of aircraft? -General Knowledge

Last Answer : answer:

Description : How is propane gas filled in cylinders ?

Last Answer : Propane gas is filled in a cylinder in liquid state at high pressure.

Description : The discharge tube is filled with uniform_______column glow at how enough pressure of the gas in the tube.

Last Answer : The discharge tube is filled with uniform_______column glow at how enough pressure of the gas in the tube.

Description : A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37.0^(@)C` . As it does so, it absorbs

Last Answer : A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37. ... J` D. `q= +208 J, w=+208 J`

Description : Nitrogen gas is filled in a container of volume 2.32 L at 32°C and 4.7 atm pressure. Calculate the number of moles of the gas.

Last Answer : Nitrogen gas is filled in a container of volume 2.32 L at 32°C and 4.7 atm pressure. Calculate the number of moles of the gas.

Description : In ordinary incadescent and fluorscen lamps the gas filled along with nitrogen is

Last Answer : In ordinary incadescent and fluorscen lamps the gas filled along with nitrogen is A. Ne B. He C. Xe D. Ar

Description : Which gas filled in tyre of Plane?

Last Answer : Helium

Description : Which gas is filled in electric bulb?

Last Answer : Argon

Description : It is easy to burst a gas-filled balloon with a needle than with a nail. It is because – (1) nail is more longer than needle. (2) nail exerts more pressure than needle on the balloon. (3) needle exerts more pressure than nail on the balloon. (4) gas is reactive with the needle.

Last Answer : (3) needle exerts more pressure than nail on the balloon. Explanation: It is easy to burst a gas-filled balloon with a needle than with a nail because the needle applies more pressure than nail. Besides, ... tip of the needle, so only a little force gives a lot of pressure (pressure = force/area).

Description : High vacuum diodes, gas-filled diodes, and germanium semiconductor diodes may all be used as _____________. A. potentiometers B. rectifiers C. power sources D. photocells

Last Answer : Answer: B

Description : Which is the gas usually filled in the electric bulb?

Last Answer : Nitrogen

Description : Balloons are filled with which gas?

Last Answer : Helium

Description : Neon gas is (A) Flammable in nature (B) Used in color discharge tube (C) Filled in lamps having tungsten filament (D) All (A), (B) and (C)

Last Answer : (B) Used in color discharge tube

Description : Explain the constructional features of Gas filled shock Absorber with sketch.

Last Answer : Features: 1. Control tire motion better than non gas shock absorber 2. Vibration is reduced 3. Reduced aeration. 4. Improved handling.

Description : 1. Which is the gas usually filled in the electric bulb? 2. What is an intrusion of magma along a bedding plane is called? 3. Of which metal was the The famous figure of a dancing girl ... alloys is used for making magnets? 20. By which bank are the central banking functions in India performed?

Last Answer : Answer : 1. Nitrogen 2. Batholith 3. Bronze 4. Mahabalipuram 5. UTI-II 6. Xylem vessel system 7. China 8. Introduction of Dyarchy 9. Home Affairs 10. Charles H. Townes 11. Russia 12. Oxygen ... . Euclyptus 16. The Estimates Committee 17. Yangtze delta 18. Udayin 19. Alnico 20. Reserve Bank of India

Description : 1. Balloons are filled with which gas? 2. Hitendra Desai was a noted figure in which field? 3. Which rural bank has been named after a river? 4. What happens when the water content in ... 20. Nicolo Conti, the traveller, who visited Vijayanagara kingdom in 1420 A.D., belongs to which country?

Last Answer : Answer : 1. Helium 2. Politics 3. Varada Grameen Bank 4. Decreases as temperature increases 5. Allahabad pillar inscription 6. Auxanometer 7. Haryana 8. A pigment 9. Sheep and goats10. ... Muhammad Tughluq 16. June, 1948 17. Limestone 18. Frictional unemployment 19. Chemical weathering 20. Italy

Description : Helium gas is filled in ballons because (1) its atomic number is 2 (2) it is lighter than air (3) it is one of the constitutents of water (4) it is a noble gas

Last Answer : it is lighter than air

Description : It is easy to burst a gas-filled balloon with a neelde than with a nail. It is because (1) nail is more longer than needle. (2) nail exerts more pressure than needle on the balloon. (3) needle exerts more pressure than nail on the balloon. (4) gas is reactive with the needle.

Last Answer : needle exerts more pressure than nail on the balloon.

Description : Describe with neat diagram, how temperature is measured by Gas filled thermometer.

Last Answer : Explanation:- If volume of a gas is maintained at constant and If a certain volume of inert gas is enclosed in a bulb, capillary and bourdon tube, the most of the gas in the bulb, then the ...   Name of the gases used in Gas filled thermometers.  1. Nitrogen 2. Helium 3. Inert Gas 

Description : State two advantages and two drawbacks of liquid filled and gas filled thermometer.

Last Answer : Liquid filled thermometer  Advantages: 1) They are comparatively cheaper than other temperature measurement devices. 2) They are handy and convenient to use. 3) Unlike electrical thermometers, they do ... : 1) Larger bulb size. 2) Generates less deflection force for controlling device.