The most suitable method for extraction of copper from low grade sulphide ore is

1 Answer

Answer :

The most suitable method for extraction of copper from low grade sulphide ore is A. Smelting ... process C. Leaching process D. Electrolytic process

Related questions

Description : (A) Auto reduction of ore is used for the extraction of copper (R ) The sulphide ore of copper reacts with its oxide to the give the metal

Last Answer : (A) Auto reduction of ore is used for the extraction of copper (R ) The sulphide ore of copper reacts ... . If (A) is incorrect but (R ) is correct

Description : At a site, low grade copper ores are available and zinc and iron seraps are also available. Which of the two seraps will be more suitable for reducing the leached copper ore and why ?

Last Answer : Ans. : The E0 value for the redox couple Zn2+/ Zn(-0.76V) is more negative than that of Fe2+/ Fe(- 0.44) redox couple. Therefore, Zinc is more reactive than iron and hence reduction will ... Zinc seraps are used, But Zinc is a costier metal than iron so using iron scraps would be more economical.

Description : Extraction of `Ag` from sulphide ore and removal of unreacted silver bromide from phorographic plate involve complexes:

Last Answer : Extraction of `Ag` from sulphide ore and removal of unreacted silver bromide from phorographic plate involve ... (3))_(2)]^(3-)` respectively

Description : In the extraction of Cu from its sulphide ore, the metal is formed by reduction of `Cu_(2)O` with

Last Answer : In the extraction of Cu from its sulphide ore, the metal is formed by reduction of `Cu_(2)O` with A. FeS B. CO C. `Cu_(2)S` D. `SO_(2)`

Description : In the extraction of Cu from its sulphide ore, the metal is formed by reduction of `Cu_(2)O` with

Last Answer : In the extraction of Cu from its sulphide ore, the metal is formed by reduction of `Cu_(2)O` with A. FeS B. CO C. `Cu_(2)S` D. `SO_(2)`

Description : Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Last Answer : B) High thermal conductivity

Description : Describe the method used for concentration of sulphide ore. 

Last Answer : Process : In this process, the powdered sulphide ore is mixed with water & pine oil. The whole mixture is then stirred vigorously by passing compressed air. The oil forms a froth with air ... ; sink to the bottom of the tank. The floating froth is then skimmed off into settling basins.

Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt

Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and ... D. `Cu_(2)O +FeO`(large amount).

Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt

Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then ... CaSiO_(3)` D. `Cu_(2)O.SiO_(2)`

Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt

Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and ... (3)` D. To check the reduction of FeO

Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt

Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then ... O` D. `CuCO_(3).Cu(OH)_(2)`

Description : Name the sequential steps involved in extraction of copper from its copper pyrite ore.

Last Answer : sequential steps involved in extraction of copper from its copper pyrite ore

Description : The method used for the enrichment of sulphide ores of copper is

Last Answer : The method used for the enrichment of sulphide ores of copper is A. Mangetic Separation B. Froth floatation process C. Electro refining D. Smelting

Description : The common method for the extraction of metals from the oxide ore is :

Last Answer : The common method for the extraction of metals from the oxide ore is : A. Reduction with carbon B. ... . reduction with `H_(2)` D. electrolytic method

Description : Extraction of uranium from its ore is done by __________ method. (A) Chemical (B) Pyrometallurgical (C) Physical beneficiation (D) Electrometallurgical

Last Answer : (A) Chemical

Description : A sulphide ore is first converted into its oxide before reduction. This is done because :

Last Answer : A sulphide ore is first converted into its oxide before reduction. This is done because : A ... oxide is generally less stable than the metal sulphide

Description : Assertion : Froth flatation process is used to concentrate sulphide ores. Reason : There is a difference in the nature of wettibility of different ore

Last Answer : Assertion : Froth flatation process is used to concentrate sulphide ores. Reason : There is a difference ... -1 is false but Statement -2 is true

Description : Froth floatation process for the concentration of sulphide ore is an illustration of the practical application of

Last Answer : Froth floatation process for the concentration of sulphide ore is an illustration of the practical ... B. absorption C. sedimentation D. cogulation

Description : Which of the folowing is a sulphide ore?

Last Answer : Which of the folowing is a sulphide ore? A. Magnetite B. Haematite C. Calamine D. Ironpyrites

Description : (A) Roasting is a process in which the ore is heate in presence of air (R ) Concentration of sulphide ore is done by calcinaiton

Last Answer : (A) Roasting is a process in which the ore is heate in presence of air (R ) Concentration of sulphide ... . If (A) is incorrect but (R ) is correct

Description : Froth floatation process used for the concentration of sulphide ore. Which of the following statements are correct (a) It is based on the difference i

Last Answer : Froth floatation process used for the concentration of sulphide ore. Which of the following statements are correct (a) ... . (a), (b) ( c) are correct

Description : Froth floatation process for the concentration of sulphide ore is an illustration of the practical application of

Last Answer : Froth floatation process for the concentration of sulphide ore is an illustration of the practical ... B. absorption C. sedimentation D. coagulateion

Description : Which of the following metals can be oriented directly during the roasting of its sulphide ore

Last Answer : Which of the following metals can be oriented directly during the roasting of its sulphide ore A. Hg B. Zn C. Fe D. Ca

Description : Which one of the following does not occurs as sulphide ore

Last Answer : Which one of the following does not occurs as sulphide ore A. Zn B. Cr C. Ag D. Fe

Description : The product (s) of roasting of a sulphide ore is (are) (A) Oxide only (B) Sulphate only (C) Oxide and sulphate (D) Dependent on temperature and partial pressure of oxygen & sulphur dioxide

Last Answer : (A) Oxide only

Description : How is the low grade iron ore utilized? -SST 10th

Last Answer : The inferior Variety is often used in manufacturing sponge iron and converted into pellets and than exported.

Description : Which of the following is the most suitable for extraction in a system having very low density difference? (A) Mixer-settler extractor (B) Centrifugal extractor (C) Pulsed extractor (D) Packed extraction tower

Last Answer : (B) Centrifugal extractor

Description : Statement-I : `CuFeS_(2)` is concentrated by froath floatation method Statement-II : `CuFeS_(2)` is main ore of copper.

Last Answer : Statement-I : `CuFeS_(2)` is concentrated by froath floatation method Statement-II : `CuFeS_(2)` is main ore of copper.

Description : Froth floatation is the most suitable for treating (A) Iron ores (B) Sulphide ores (C) Quartzite (D) None of these

Last Answer : (B) Sulphide ores

Description : Statement-1: Auto reduction of ores is used for cinnabar, copper glance and Galena ores Statement-2:The sulphide ores of these metals react with their

Last Answer : Statement-1: Auto reduction of ores is used for cinnabar, copper glance and Galena ores Statement-2: ... Statement-1 is false but Statement -2 is true

Description : What are the elements that make up copper sulphide?

Last Answer : Copper sulfide contain copper and sulfur.

Description : Copper and Silver lie below in the electrochemical series and yet they are found in the combined state as sulphide in nature.Comment.

Last Answer : Ans. : Due to high polarizing power of Cu and Ag ions, their sulphides are even more stable than the metals. 

Description : Write the molecular formulae of: 1. Copper oxide 2. Iron (III) chloride 3. Sodium hydroxide 4. Iron (II) sulphide 5. Lead (II) oxide 6. Hydrogen nitrate (nitric ... Hydrogen sulphate (sulphuric acid) 8. Calcium hydroxide 9. Magnesium carbonate 10.Ammonium carbonate

Last Answer : 1. Copper oxide - CuO 2. Iron (III) chloride - FeCl3 3. Sodium hydroxide - NaOH 4. Iron (II) sulphide - FeS 5. Lead (II) oxide - PbO 6. Hydrogen nitrate (nitric acid) - HNO3 7. ... ) - H2SO4 8. Calcium hydroxide - Ca(OH)2 9. Magnesium carbonate - MgCO3 10.Ammonium carbonate - (NH4)2CO3

Description : Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile ... and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Last Answer : (D) None of these

Description : In the process of extraction of gold. Roasted gold ore `+CN^(-)+H_(2)O overset(O_(2))rarr [X]+OH^(-)` `[X]+Znrarr [Y]+Au` Identify the complexes `[X]

Last Answer : In the process of extraction of gold. Roasted gold ore `+CN^(-)+H_(2)O overset(O_(2))rarr [X]+OH^(-)` `[X]+ ... (4)]^(-),[Y] =[Zn (CN_(4))]^(-2)`

Description : In the cyanide extraction process of silver from argentite ore, the oxidising and reducing agents are

Last Answer : In the cyanide extraction process of silver from argentite ore, the oxidising and reducing agents are ... D. `HNO_(3) and CO` respectively

Description : The reaction (s) which does (do) not occur in the reduction zone in the extraction of iron from haematite ore is (are)

Last Answer : The reaction (s) which does (do) not occur in the reduction zone in the extraction of iron from haematite ore ... ` D. `CaO + SiO_(2) rarr CaSiO_(3)`

Description : Consider the following statements and arrange in the order of true/false as given in the codes.`S_(1)`: In extraction of iron from haematite ore, the

Last Answer : Consider the following statements and arrange in the order of true/false as given in the codes.`S_(1)`: In ... `. A. TFTT B. FTFF C. FFTT D. TFFT

Description : Statement-1: Extraction of gold from its native ore involves leaching the metal wih dilute solution of NaCN in presence of air. Statement-2:This is an

Last Answer : Statement-1: Extraction of gold from its native ore involves leaching the metal wih dilute solution of ... -1 is false but Statement -2 is true

Description : The reaction (s) which does (do) not occur in the reduction zone in the extraction of iron from haematite ore is (are)

Last Answer : The reaction (s) which does (do) not occur in the reduction zone in the extraction of iron from haematite ore ... ` D. `CaO + SiO_(2) rarr CaSiO_(2)`

Description : The reaction (s) which does (do) not occur in the reduction zone in the extraction of iron from haematite ore is (are)

Last Answer : The reaction (s) which does (do) not occur in the reduction zone in the extraction of iron from haematite ore ... ` D. `CaO + SiO_(2) rarr CaSiO_(3)`

Description : In the process of extraction of gold, Roasted gold ore `+CN^(-)+H_2Ooverset(o_2)rarr[X]+OH^(-)` `[X]+Znrarr[Y]+Au` Identify the complexes [X] and [Y]

Last Answer : In the process of extraction of gold, Roasted gold ore `+CN^(-)+H_2Ooverset(o_2)rarr[X]+OH^(-)` `[X]+Znrarr[Y]+Au` ... _(4)]^(3-),Y=[Zn(CN)_(6)]^(2-)`

Description : In the extraction of iron in the blast furnace, the reducing agent for the ore is

Last Answer : In the extraction of iron in the blast furnace, the reducing agent for the ore is A. Carbon monoxide B. Carbon dioxide C. Carbon D. Silica

Description : The main reactions occuring in blast furnace during extraction of iron from haematite ore…..

Last Answer : The main reactions occuring in blast furnace during extraction of iron from haematite ore .. A. `Fe_(2)O_ ... 3Cto2Fe+3CO` D. `CaO+SiO_(2)toCaSiO_(2)`

Description : Which of the following diagrams is correctly related to different steps involved in the extraction of Sn form cassiterite Ore?

Last Answer : Which of the following diagrams is correctly related to different steps involved in the extraction ... displacement method `rarr` Vapour phase refing

Description : In the cyanide extraction process of silver from argentite ore, the oxidising and reducing agents are

Last Answer : In the cyanide extraction process of silver from argentite ore, the oxidising and reducing agents are ... D. `HNO_(3)` and CO respectively

Description : The extraction of metal from the ore is

Last Answer : The extraction of metal from the ore is A. an oxidation process B. a reduction process C. a hydration process D. a neutratlisaiton process

Description : Which of the following process is used in the extraction of iron from the Iron ore?

Last Answer : Reduction

Description : Extraction of uranium from its ore is done using __________ methods. (A) Electrometallurgical (B) Pyrometallurgical (C) Chemical (D) Physical beneficiation

Last Answer : (C) Chemical

Description : __________ is used as a flux in the extraction of iron from iron ore (haematite) in blast furnace. (A) Bauxite (B) Limestone (C) Quartz (D) Manganese

Last Answer : (B) Limestone