Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity
(B) High thermal conductivity
(C) Low density
(D) High chemical activity
by

1 Answer

Answer :

B) High thermal conductivity
by

Related questions

Extraction of uranium from its ore is done by __________ method. (A) Chemical (B) Pyrometallurgical (C) Physical beneficiation (D) Electrometallurgical

Description : Extraction of uranium from its ore is done by __________ method. (A) Chemical (B) Pyrometallurgical (C) Physical beneficiation (D) Electrometallurgical

Last Answer : (A) Chemical

The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Description : The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Last Answer : Option A

The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Description : The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Last Answer : Option A

Extraction of uranium from its ore is done using __________ methods. (A) Electrometallurgical (B) Pyrometallurgical (C) Chemical (D) Physical beneficiation

Description : Extraction of uranium from its ore is done using __________ methods. (A) Electrometallurgical (B) Pyrometallurgical (C) Chemical (D) Physical beneficiation

Last Answer : (C) Chemical

ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Description : ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Last Answer : (D) High viscosity

A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Description : A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Last Answer : (A) More corrosion resistant

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

Water is normally used as a coolant in the heat exchange equipments mainly because of its (A) Abundance & high heat capacity (B) Low density (C) Low viscosity (D) High fluidity

Description : Water is normally used as a coolant in the heat exchange equipments mainly because of its (A) Abundance & high heat capacity (B) Low density (C) Low viscosity (D) High fluidity

Last Answer : (A) Abundance & high heat capacity

Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity

Description : Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity

Last Answer : ANSWER: Y -- HIGH MELTING POINT

Flux addition during smelting of ore is done to (A) Remove impurities/gangue (B) Enhance rate of reaction (C) Accelerate reduction of ore (D) Separate slag from metal

Description : Flux addition during smelting of ore is done to (A) Remove impurities/gangue (B) Enhance rate of reaction (C) Accelerate reduction of ore (D) Separate slag from metal

Last Answer : (A) Remove impurities/gangue

During the extraction of iron, slag produced is

Description : During the extraction of iron, slag produced is

Last Answer : During the extraction of iron, slag produced is A. Zone of heat absorption B. Zone of reduction only ... only D. Zone of reduction and zone of fusion

Among liquids, water has a comparatively high value of thermal conductivity, due to its (A) Low density (B) High viscosity (C) Partial ionisation (D) Dense structure

Description : Among liquids, water has a comparatively high value of thermal conductivity, due to its (A) Low density (B) High viscosity (C) Partial ionisation (D) Dense structure

Last Answer : (C) Partial ionisation

The chemical composition of slag formed during the smelting process in the extraction of copper is :-

Description : The chemical composition of slag formed during the smelting process in the extraction of copper is :-

Last Answer : The chemical composition of slag formed during the smelting process in the extraction of copper is :- A. `Cu_(2)O+ ... C. `CuFeS_(2)` D. `Cu_(2)S+FeO`

The chemical composition of slag formed during the smelting process in the extraction of copper is :-

Description : The chemical composition of slag formed during the smelting process in the extraction of copper is :-

Last Answer : The chemical composition of slag formed during the smelting process in the extraction of copper is :- A. `Cu_(2)O+ ... C. `CuFeS_(2)` D. `Cu_(2)S+FeO`

The chemical composition of slag formed during the smelting process in the extraction of copper is :-

Description : The chemical composition of slag formed during the smelting process in the extraction of copper is :-

Last Answer : The chemical composition of slag formed during the smelting process in the extraction of copper is :- A. `Cu_(2)O+ ... . `CuFeS_(2)` D. `Cu_(2)S++FeO`

A bearing metal should not have (A) Enough plasticity (B) Low thermal conductivity (C) Low co-efficient of friction (D) High toughness

Description : A bearing metal should not have (A) Enough plasticity (B) Low thermal conductivity (C) Low co-efficient of friction (D) High toughness

Last Answer : (B) Low thermal conductivity

Dephosphorization of molten pig iron is favoured by (A) Oxidising and basic slag (B) Reducing and basic slag (C) High activity co-efficient of phosphorous in metal (D) Oxidising and neutral slag

Description : Dephosphorization of molten pig iron is favoured by (A) Oxidising and basic slag (B) Reducing and basic slag (C) High activity co-efficient of phosphorous in metal (D) Oxidising and neutral slag

Last Answer : Option B

Electrometallurgical methods of metal extraction is normally used for those metals (A) Whose oxide/ore is not reduced by carbon (B) Which fall in the category of alkali & alkaline earth metals (C) Which stands higher in the electrochemical series of the metal (D) All (A), (B) & (C)

Description : Electrometallurgical methods of metal extraction is normally used for those metals (A) Whose oxide/ore is not reduced by carbon (B) Which fall in the category of alkali & alkaline earth metals (C) Which stands higher in the electrochemical series of the metal (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : (B) Increases

The compound of a metal found in nature is called - (1) Mineral (2) Ore (3) Flux (4) Slag

Description : The compound of a metal found in nature is called - (1) Mineral (2) Ore (3) Flux (4) Slag

Last Answer : (1) Mineral Explanation: Metals are an integral part of our planet and are found in almost all rocks and soils. Most metals form compounds called minerals, which are naturally occurring, inorganic solids with regular chemical compositions and crystal structures.

Finned tube heat exchangers (A) Give larger area per tube (B) Use metal fins of low thermal conductivity (C) Facilitate very large temperature drop through tube wall (D) Are used for smaller heat load

Description : Finned tube heat exchangers (A) Give larger area per tube (B) Use metal fins of low thermal conductivity (C) Facilitate very large temperature drop through tube wall (D) Are used for smaller heat load

Last Answer : (A) Give larger area per tube

Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity(C) Surface tension(D) Density

Description : Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity (C) Surface tension (D) Density

Last Answer : (D) Density

Presence of high amount of silicon in cast iron (A) Suppresses the decomposition of Fe3C (B) Increases the formation of graphite (C) Increases the contraction of the metal (D) Reduces its fluidity

Description : Presence of high amount of silicon in cast iron (A) Suppresses the decomposition of Fe3C (B) Increases the formation of graphite (C) Increases the contraction of the metal (D) Reduces its fluidity

Last Answer : (B) Increases the formation of graphite

The most suitable method for extraction of copper from low grade sulphide ore is

Description : The most suitable method for extraction of copper from low grade sulphide ore is

Last Answer : The most suitable method for extraction of copper from low grade sulphide ore is A. Smelting ... process C. Leaching process D. Electrolytic process

Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Description : Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Last Answer : (C) Tensile strength

The slag formed in the blast furnace during the extraction of iron from haematite is

Description : The slag formed in the blast furnace during the extraction of iron from haematite is

Last Answer : The slag formed in the blast furnace during the extraction of iron from haematite is A. `Ca_(3)(PO_(4))_(2)` ... (3)` C. `FeSiO_(3)` D. `MnSiO_(3)`

(3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word traces its origins back to the latin lux, meaning "light", and generally implies radiance, gloss, or brilliance. Metals in general have high electrical conductivity, high thermal conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.

Description : (3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word ... conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.

Last Answer : Cloud is a colloidal dispersion of – (1) Air in a dispersion medium of water (2) Fog in a dispersion medium of water (3) Mist in a dispersion medium of air (4) Water drops in a dispersion medium of air

Highly porous refractory bricks are (A) Less susceptible to chemical attack by molten fluxes and gases etc (B) Very strong (C) Having very high thermal conductivity (D) None of these

Description : Highly porous refractory bricks are (A) Less susceptible to chemical attack by molten fluxes and gases etc (B) Very strong (C) Having very high thermal conductivity (D) None of these

Last Answer : (D) None of these

Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity (C) In unsteady state heat conduction, heat flows in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Description : Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the ... in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Last Answer : (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity

Addition of silicon to cast iron (A) Promotes graphite module formation (B) Improves its ductility (C) Does not promote graphite flakes formation (D) Increases the fluidity of molten metal

Description : Addition of silicon to cast iron (A) Promotes graphite module formation (B) Improves its ductility (C) Does not promote graphite flakes formation (D) Increases the fluidity of molten metal

Last Answer : Option D

Which of the following is an undesirable property for an absorbingsolvent? (A) Low vapour pressure (B) Low velocity (C) Low freezing point (D) None of these

Description : Which of the following is an undesirable property for an absorbingsolvent? (A) Low vapour pressure (B) Low velocity (C) Low freezing point (D) None of these

Last Answer : (D) None of these

Which of the following is an undesirable property in a tower packing? (A) Large surface per unit volume (B) Large free cross-section (C) Low weight per unit volume (D) Large weight of liquid retained

Description : Which of the following is an undesirable property in a tower packing? (A) Large surface per unit volume (B) Large free cross-section (C) Low weight per unit volume (D) Large weight of liquid retained

Last Answer : (D) Large weight of liquid retained

The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Description : The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Last Answer : (A) Viscosity

Heat transfer occurs by natural convection because change in temperature causes difference in (A) Viscosity (B) Density (C) Thermal conductivity (D) Heat capacity

Description : Heat transfer occurs by natural convection because change in temperature causes difference in (A) Viscosity (B) Density (C) Thermal conductivity (D) Heat capacity

Last Answer : (B) Density

Boiling point of a solution according to Duhring's rule is a linear function of the __________ of water. (A) Boiling point (at the same pressure) (B) Viscosity (C) Density (D) Thermal conductivity

Description : Boiling point of a solution according to Duhring's rule is a linear function of the __________ of water. (A) Boiling point (at the same pressure) (B) Viscosity (C) Density (D) Thermal conductivity

Last Answer : (A) Boiling point (at the same pressure)

Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Description : Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Last Answer : (C) High corrosion resistance

Low thermal conductivity of heat insulating materials is due to its (A) Dense structure (B) High proportion of air space (C) High specific heat (D) None of these

Description : Low thermal conductivity of heat insulating materials is due to its (A) Dense structure (B) High proportion of air space (C) High specific heat (D) None of these

Last Answer : (B) High proportion of air space

Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Description : Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Last Answer : (A) Fire clay

Thickness of stock does not affect the fuel economy of furnaces, if thematerial to be heated is of(A) Low emissivity(B) High thermal conductivity(C) Both (A) and (B)(D) Neither (A) nor (B)

Description : Thickness of stock does not affect the fuel economy of furnaces, if thematerial to be heated is of (A) Low emissivity (B) High thermal conductivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Description : Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Last Answer : (A) Is an electrical insulating material

ideal material for making cooking vessels should have (A) High heat capacity (B) Low heat capacity (C) High thermal conductivity (D) Both (B) and (C)

Description : ideal material for making cooking vessels should have (A) High heat capacity (B) Low heat capacity (C) High thermal conductivity (D) Both (B) and (C)

Last Answer : Option D

Statement-1: Extraction of gold from its native ore involves leaching the metal wih dilute solution of NaCN in presence of air. Statement-2:This is an

Description : Statement-1: Extraction of gold from its native ore involves leaching the metal wih dilute solution of NaCN in presence of air. Statement-2:This is an

Last Answer : Statement-1: Extraction of gold from its native ore involves leaching the metal wih dilute solution of ... -1 is false but Statement -2 is true

In the extraction of Cu from its sulphide ore, the metal is formed by reduction of `Cu_(2)O` with

Description : In the extraction of Cu from its sulphide ore, the metal is formed by reduction of `Cu_(2)O` with

Last Answer : In the extraction of Cu from its sulphide ore, the metal is formed by reduction of `Cu_(2)O` with A. FeS B. CO C. `Cu_(2)S` D. `SO_(2)`

(A) Auto reduction of ore is used for the extraction of copper (R ) The sulphide ore of copper reacts with its oxide to the give the metal

Description : (A) Auto reduction of ore is used for the extraction of copper (R ) The sulphide ore of copper reacts with its oxide to the give the metal

Last Answer : (A) Auto reduction of ore is used for the extraction of copper (R ) The sulphide ore of copper reacts ... . If (A) is incorrect but (R ) is correct

In the extraction of Cu from its sulphide ore, the metal is formed by reduction of `Cu_(2)O` with

Description : In the extraction of Cu from its sulphide ore, the metal is formed by reduction of `Cu_(2)O` with

Last Answer : In the extraction of Cu from its sulphide ore, the metal is formed by reduction of `Cu_(2)O` with A. FeS B. CO C. `Cu_(2)S` D. `SO_(2)`

The correct sequence of steps involved in extraction of metal from its ore is a) removal of impurities, purify metal, reduction of ore b) purify metal, removal of impurities, reduction of metal ore . c) concentration of ore , refining of metal , reduction d) removal of impurities from ore , reduction of ore , refining of metal

Description : The correct sequence of steps involved in extraction of metal from its ore is a) removal of impurities, purify metal, reduction of ore b) purify metal, removal of impurities, reduction of metal ore . c ... of metal , reduction d) removal of impurities from ore , reduction of ore , refining of metal

Last Answer : d) removal of impurities from ore , reduction of ore , refining of metal

A metal wire of 0.01 m dia and thermal conductivity 200 W/m.K is exposed to a fluid stream with a convective heat transfer coefficient of 100 W/m2 .K. The Biot number is (A) 5.6 (B) 0.025 (C) 3.5 (D) 0.0035

Description : A metal wire of 0.01 m dia and thermal conductivity 200 W/m.K is exposed to a fluid stream with a convective heat transfer coefficient of 100 W/m2 .K. The Biot number is (A) 5.6 (B) 0.025 (C) 3.5 (D) 0.0035

Last Answer : (B) 0.025

The variation of thermal conductivity of a metal with temperature is often correlated using an expression of the form K = K0 + at, where, K is the thermal conductivity and T is the temperature (in °K). The units of 'a' in SI system will be (A) W/m.k (B) W/m (C) W/m.k

Description : The variation of thermal conductivity of a metal with temperature is often correlated using an expression of the form K = K0 + at, where, K is the thermal conductivity and T is the temperature (in °K). The units of 'a' in SI system will be (A) W/m.k (B) W/m (C) W/m.k

Last Answer : (C) W/m.k

What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Description : What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Last Answer : (A) 2