Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile matter coals are more suitable for making pulverised fuel (C) Regulation of furnace temperature and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Pick out the wrong statement.
(A) Pulverised fuel can be completely burnt with less percentage of excess
air compared to lump coal
(B) Low grade coal can be used, but generally high volatile matter coals are
more suitable for making pulverised fuel
(C) Regulation of furnace temperature and atmosphere (oxidising or
reducing) is easily possible with pulverised fuel firing
(D) None of these
by

1 Answer

Answer :

(D) None of these
by

Related questions

Combustion of pulverised coal as compared to that of lump coal (A) Develops a non-luminous flame (B) Develops a low temperature flame (C) Can be done with less excess air (D) Provides a lower rate of heat release

Description : Combustion of pulverised coal as compared to that of lump coal (A) Develops a non-luminous flame (B) Develops a low temperature flame (C) Can be done with less excess air (D) Provides a lower rate of heat release

Last Answer : (C) Can be done with less excess ai

Pick out the wrong statement. (A) High concentration of oxygen in flue gas means high stack loss (B) Gaseous fuels require the least % excess air for complete combustion (C) The ratio of fixed carbon to volatile matter percentage in coal is called its 'fuel ratio' (D) Calorific value of natural gas is more than that of LPG

Description : Pick out the wrong statement. (A) High concentration of oxygen in flue gas means high stack loss (B) Gaseous fuels require the least % excess air for complete combustion (C) The ratio of fixed carbon to ... coal is called its 'fuel ratio' (D) Calorific value of natural gas is more than that of LPG

Last Answer : (D) Calorific value of natural gas is more than that of LPG

Pick out the wrong statement. (A) Strongly caking coal should not be used in the Lurgi gasifier (B) Acetylene gas cannot be used for illumination purpose (C) Water gas is called blue gas because of the color of the flame, when it is burnt (D) Gaseous fuels require less percentage of excess air for combustion as compared to liquid fuels

Description : Pick out the wrong statement. (A) Strongly caking coal should not be used in the Lurgi gasifier (B) Acetylene gas cannot be used for illumination purpose (C) Water gas is called blue gas ... is burnt (D) Gaseous fuels require less percentage of excess air for combustion as compared to liquid fuels

Last Answer : (B) Acetylene gas cannot be used for illumination purpose

Which of the following would require maximum amount of % excess air for complete combustion? (A) Coke oven gas (B) Furnace oil (C) Pulverised coal (D) Lump coal (fixed on chain grate)

Description : Which of the following would require maximum amount of % excess air for complete combustion? (A) Coke oven gas (B) Furnace oil (C) Pulverised coal (D) Lump coal (fixed on chain grate)

Last Answer : (D) Lump coal (fixed on chain grate)

The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Description : The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel consumption

The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal(C) Accelerates the burning rate and economises on fuel combustion(D) All (A), (B) and (C)

Description : The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel combustion (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel combustion

Black smoke coming out of the chimney of a furnace is an indication of the use of __________ in the furnace. (A) Low amount of excess combustion air (B) Large quantity of excess combustion air(C) Hydrocarbon fuel(D) Pulverised coal as fuel

Description : Black smoke coming out of the chimney of a furnace is an indication of the use of __________ in the furnace. (A) Low amount of excess combustion air (B) Large quantity of excess combustion air (C) Hydrocarbon fuel (D) Pulverised coal as fuel

Last Answer : (A) Low amount of excess combustion air

Combustion of pulverised coal compared to the lumpy coal (A) Provides better control of furnace temperature (B) Facilitates combustion with lower excess air (C) Provides higher thermal efficiency & flame temperature (D) All (A), (B) & (C)

Description : Combustion of pulverised coal compared to the lumpy coal (A) Provides better control of furnace temperature (B) Facilitates combustion with lower excess air (C) Provides higher thermal efficiency & flame temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The function of secondary combustion air is to (A) Pneumatically convey the pulverised coal (B) Completely burn the volatile matter (C) Burn the lumpy coal (D) None of these

Description : The function of secondary combustion air is to (A) Pneumatically convey the pulverised coal (B) Completely burn the volatile matter (C) Burn the lumpy coal (D) None of these

Last Answer : (B) Completely burn the volatile matter

Which of the following fuels is generally not used in thermal power plant boiler firing? (A) Furnace oil, light diesel oil and tar/PCM (B) Pulverised coking coal (C) Coal middling from washeries (D) B.F. gas, coke oven gas and L.D. converter gas

Description : Which of the following fuels is generally not used in thermal power plant boiler firing? (A) Furnace oil, light diesel oil and tar/PCM (B) Pulverised coking coal (C) Coal middling from washeries (D) B.F. gas, coke oven gas and L.D. converter gas

Last Answer : (B) Pulverised coking coal

Ratio of primary air to secondary air increases with increase in the rank of coal, because the (A) High rank coals have higher amount of volatile matter (B) Ratio of fixed carbon to volatile matter increases (C) Oxygen content progressively decreases (D) Calorific value of the coal increases

Description : Ratio of primary air to secondary air increases with increase in the rank of coal, because the (A) High rank coals have higher amount of volatile matter (B) Ratio of fixed carbon to volatile matter increases (C) Oxygen content progressively decreases (D) Calorific value of the coal increases

Last Answer : (B) Ratio of fixed carbon to volatile matter increases

In order to maintain an oxidising atmosphere in a furnace, it should have (A) More of excess air (B) Less of excess air (C) More of CO in flue gas (D) More of CO2 in flue gas

Description : In order to maintain an oxidising atmosphere in a furnace, it should have (A) More of excess air (B) Less of excess air (C) More of CO in flue gas (D) More of CO2 in flue gas

Last Answer : (A) More of excess air

A coal having high ratio of volatile matter to fixed carbon as compared to a coal having low ratio of volatile matter to fixed carbon (A) Is less liable to spontaneous combustion on storage (B) Is more difficult to ignite and produces a shorter flame (C) Requires smaller combustion space and less secondary air (D) None of these

Description : A coal having high ratio of volatile matter to fixed carbon as compared to a coal having low ratio of volatile matter to fixed carbon (A) Is less liable to spontaneous combustion on storage (B) ... a shorter flame (C) Requires smaller combustion space and less secondary air (D) None of these

Last Answer : (D) None of these

Coke compared to the coal from which it has been made, contains (A) Less volatile matter (B) More carbon (C) Greater percentage of ash (D) All (A), (B) and (C)

Description : Coke compared to the coal from which it has been made, contains (A) Less volatile matter (B) More carbon (C) Greater percentage of ash (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten

Description : Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten

Last Answer : (B) High fusion point of its ash

Coals used for the generation of producer gas should have (A) High caking index (B) Low fusion point of ash (C) High volatile matter content (D) Very low ash content (8-10%)

Description : Coals used for the generation of producer gas should have (A) High caking index (B) Low fusion point of ash (C) High volatile matter content (D) Very low ash content (8-10%)

Last Answer : (C) High volatile matter content

Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct process of by-product recovery (C) A high swelling index number of coking coal indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Description : Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct ... indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Last Answer : (C) A high swelling index number of coking coal indicates poor caking properties of coal

In practical operation of any furnace, zero oxygen percentage or theoretical CO2 percentage in flue gas is rarely achieved, because of (A) Use of non-preheated combustion air (B) Use of pulverised solid fuels (C) Imperfect mixing of fuel & air and infiltration of air (D) Use of excessive positive draft in the furnace

Description : In practical operation of any furnace, zero oxygen percentage or theoretical CO2 percentage in flue gas is rarely achieved, because of (A) Use of non-preheated combustion air (B) Use of pulverised solid ... of fuel & air and infiltration of air (D) Use of excessive positive draft in the furnace

Last Answer : (C) Imperfect mixing of fuel & air and infiltration of air

__________ atmosphere is maintained inside an iron blast furnace. (A) Oxidising (B) Reducing (C) Inert (D) Decarburising

Description : __________ atmosphere is maintained inside an iron blast furnace. (A) Oxidising (B) Reducing (C) Inert (D) Decarburising

Last Answer : (B) Reducing

Pick out the wrong statement. (A) Angle of repose of coal increases with its increasing size (B) Specific gravity of coal increases with its increasing maturity (C) Refractive index and reflectance of coal increases with the increasing rank of coal (D) Specific heat of coal decreases with increases in the volatile matter and decrease in the C/H ratio of coal

Description : Pick out the wrong statement. (A) Angle of repose of coal increases with its increasing size (B) Specific gravity of coal increases with its increasing maturity (C) Refractive index and reflectance of ... of coal decreases with increases in the volatile matter and decrease in the C/H ratio of coal

Last Answer : (D) Specific heat of coal decreases with increases in the volatile matter and decrease in the C/H ratio of coal

Function of secondary air in pulverised coal firing is to (A) Transport the coal to the burner (B) Dry the coal (C) Ensure efficient burning of coal around the burner (D) Reduce primary air requirement

Description : Function of secondary air in pulverised coal firing is to (A) Transport the coal to the burner (B) Dry the coal (C) Ensure efficient burning of coal around the burner (D) Reduce primary air requirement

Last Answer : (C) Ensure efficient burning of coal around the burner

Combustion of pulverised fuel (A) Requires larger combustion chamber than rich gaseous fuel (B) In a metallurgical furnace does not contaminate the product in the furnace by ash from fuel (C) Suppresses the discharge of fine dust and grit into atmosphere (D) All (A), (B) and (C)

Description : Combustion of pulverised fuel (A) Requires larger combustion chamber than rich gaseous fuel (B) In a metallurgical furnace does not contaminate the product in the furnace by ash from fuel (C) Suppresses the discharge of fine dust and grit into atmosphere (D) All (A), (B) and (C)

Last Answer : (A) Requires larger combustion chamber than rich gaseous fuel

Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas

Description : Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas

Last Answer : (C) Blast furnace gas/mixed gas

Pick out the wrong statement: (A) Carburetted water gas is also called blue gas (B) Coals are divided in four species according to their carbon content in Seylor's classification (C) Carbonisation time in a by-product coke oven is about 16 hours (D) Gross and net calorific value of a fuel is the same, if it does not contain hydrogen or hydrocarbons

Description : Pick out the wrong statement: (A) Carburetted water gas is also called blue gas (B) Coals are divided in four species according to their carbon content in Seylor's classification (C) Carbonisation time ... and net calorific value of a fuel is the same, if it does not contain hydrogen or hydrocarbons

Last Answer : (A) Carburetted water gas is also called blue gas

Temperature of preheated air used for the transportation of pulverised coal through pipes to the burner of a boiler furnace is restricted to a maximum limit of about 300° C to avoid the (A) Requirement of large volume combustion chamber (B) Risk of explosion (C) Chances of clinker formation (D) Incomplete combustion of coal

Description : Temperature of preheated air used for the transportation of pulverised coal through pipes to the burner of a boiler furnace is restricted to a maximum limit of about 300° C to avoid the (A) ... chamber (B) Risk of explosion (C) Chances of clinker formation (D) Incomplete combustion of coal

Last Answer : (B) Risk of explosion

Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly-ash discharge from the stack (C) High power consumption in its transportation (D) Erosion of induced draft fan blades

Description : Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly-ash discharge from the stack (C) High power consumption in its transportation (D) Erosion of induced draft fan blades

Last Answer : (A) Ash disposal problem

The fuel ratio of a coal is (A) The ratio of its percentage of fixed carbon to that of volatile matter (B) Helpful in estimation of its rank (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The fuel ratio of a coal is (A) The ratio of its percentage of fixed carbon to that of volatile matter (B) Helpful in estimation of its rank (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Assam (India) coals suffers mainly from the disadvantage of high __________ content. (A) Ash (B) Volatile matter (C) Sulphur (4-6%)

Description : Assam (India) coals suffers mainly from the disadvantage of high __________ content. (A) Ash (B) Volatile matter (C) Sulphur (4-6%)

Last Answer : (C) Sulphur (4-6%)

Fat coals' are those coals which have very high (A) Caking capacity (B) Volatile matter content (C) Fusion point of its ash (D) Inherent moisture conten

Description : Fat coals' are those coals which have very high (A) Caking capacity (B) Volatile matter content (C) Fusion point of its ash (D) Inherent moisture conten

Last Answer : (A) Caking capacity

Use of pulverised coal in boiler furnace provides (A) High calorific value (B) Better combustion (C) Smokeless burning (D) Less erosion on furnace walls

Description : Use of pulverised coal in boiler furnace provides (A) High calorific value (B) Better combustion (C) Smokeless burning (D) Less erosion on furnace walls

Last Answer : (B) Better combustion

A liquid/gaseous fuel containing hydrocarbons and high amount of sulphur is burnt with 40% excess air. The flue gas still contains large amount of carbon monoxide. This may be due to the (A) Presence of large quantity of hydrogen in the fuel (B) Low calorific value of the fuel (C) High sulphur content in the fuel (D) Lack of thorough mixing of fuel with air

Description : A liquid/gaseous fuel containing hydrocarbons and high amount of sulphur is burnt with 40% excess air. The flue gas still contains large amount of carbon monoxide. This may be due to the (A) Presence of large ... fuel (C) High sulphur content in the fuel (D) Lack of thorough mixing of fuel with air

Last Answer : (D) Lack of thorough mixing of fuel with air

Out of the following, which is the most important parameter for the blast furnace grade coke? (A) CSR & CRI (B) Ash content (C) Moisture content (D) Volatile matter content

Description : Out of the following, which is the most important parameter for the blast furnace grade coke? (A) CSR & CRI (B) Ash content (C) Moisture content (D) Volatile matter content

Last Answer : (A) CSR & CRI

Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly ash discharge from the stack (C) Higher power consumption in its transportation (D) Erosion of induced draft fan blades

Description : Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly ash discharge from the stack (C) Higher power consumption in its transportation (D) Erosion of induced draft fan blades

Last Answer : (A) Ash disposal problem

Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) Burning the fuel with theoretically required amount of pure oxygen results in attainment of maximum adiabatic flame temperature (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Description : Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) ... flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Last Answer : (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature

Use of pulverised coal in boilers provides (A) Higher calorific value (B) Better combustion (C) Smokeless burning (D) Less erosion on furnace wall

Description : Use of pulverised coal in boilers provides (A) Higher calorific value (B) Better combustion (C) Smokeless burning (D) Less erosion on furnace wall

Last Answer : (B) Better combustion

Pick out the correct statement.(A) Angle of repose is always greater than the angle of slide (B) A hopper is a small bin with a sloping bottom (C) A silo is a short height vessel of very large diameter used for the storage of high volatile matter coal (D) Pine oil is used as a 'modifying agent' (for activating or depressing the adsorption of filming agents) in froth floatation process

Description : Pick out the correct statement. (A) Angle of repose is always greater than the angle of slide (B) A hopper is a small bin with a sloping bottom (C) A silo is a short height ... used as a 'modifying agent' (for activating or depressing the adsorption of filming agents) in froth floatation process

Last Answer : (B) A hopper is a small bin with a sloping bottom

Pulverised fuel fired furnaces employ __________ fuel firing. (A) Horizontal (B) Vertical (C) Tangential (D) All (A), (B) and (C)

Description : Pulverised fuel fired furnaces employ __________ fuel firing. (A) Horizontal (B) Vertical (C) Tangential (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A coal having high amount of volatile matter (A) Would require smaller combustion chamber (B) Produces very little of tar and gas on carbonisation (C) Ignites easily and burns with long smoky flame (D) All (A), (B) and (C)

Description : A coal having high amount of volatile matter (A) Would require smaller combustion chamber (B) Produces very little of tar and gas on carbonisation (C) Ignites easily and burns with long smoky flame (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A coal having high amount of volatile matter (A) Would require smaller combustion chamber (B) Produces very little of tar and gas on carbonisation(C) Ignites easily and burns with long smoky flame(D) All (A), (B) and (C)

Description : A coal having high amount of volatile matter (A) Would require smaller combustion chamber (B) Produces very little of tar and gas on carbonisation (C) Ignites easily and burns with long smoky flame (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Cannel coal (A) Is non-coking (B) Has a high volatile matter content and burns with a luminous smoky flame (C) Is a non-banded coal which can be ignited easily with a match stick or candle flame, hence is so named (D) All (A), (B) and (C

Description : Cannel coal (A) Is non-coking (B) Has a high volatile matter content and burns with a luminous smoky flame (C) Is a non-banded coal which can be ignited easily with a match stick or candle flame, hence is so named (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

A coal with high __________ content, would ignite most easily. (A) Fixed carbon (B) Volatile matter (C) Ash (D) Oxygen

Description : A coal with high __________ content, would ignite most easily. (A) Fixed carbon (B) Volatile matter (C) Ash (D) Oxygen

Last Answer : (B) Volatile matter

The function of an economiser in a boiler is to preheat the (A) Feedwater (B) Combustion air (C) Pulverised coal (D) Furnace oil

Description : The function of an economiser in a boiler is to preheat the (A) Feedwater (B) Combustion air (C) Pulverised coal (D) Furnace oil

Last Answer : (A) Feedwater

Rate of low temperature oxidation of coal due to bad storage conditions (A) Decreases with increase in surface area (B) Does not vary with increase in surface area (C) Is more for low volatile coal compared to high volatile coal (D) Is accelerated by storage in large heaps with small surface to volume ratio

Description : Rate of low temperature oxidation of coal due to bad storage conditions (A) Decreases with increase in surface area (B) Does not vary with increase in surface area (C) Is more for low volatile ... to high volatile coal (D) Is accelerated by storage in large heaps with small surface to volume ratio

Last Answer : (D) Is accelerated by storage in large heaps with small surface to volume ratio

The excess air required for the combustion of pulverised coal is of the order of about __________ percent. (A) 5 (B) 15 (C) 30 (D) 45

Description : The excess air required for the combustion of pulverised coal is of the order of about __________ percent. (A) 5 (B) 15 (C) 30 (D) 45

Last Answer : (B) 15

Which of the following accentuates clinkering troubles on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportion of iron & sulphur (B) Low forced draft & fuel bed temperature (C) Thick firebed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering troubles on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportion of iron & sulphur (B) Low forced draft & fuel bed temperature (C) Thick firebed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Conversion of yellow phosphorus to red phosphorous is done in retorts at 250-450°C in the (A) Presence of an inert atmosphere (B) Presence of a reducing atmosphere (C) Absence of air (D) Presence of an oxidising atmosphere

Description : Conversion of yellow phosphorus to red phosphorous is done in retorts at 250-450°C in the (A) Presence of an inert atmosphere (B) Presence of a reducing atmosphere (C) Absence of air (D) Presence of an oxidising atmosphere

Last Answer : (C) Absence of air

Anthracite coal (A) Contains more volatile matter than bituminous coal (B) Ignites more easily than bituminous coal (C) Is essentially a coking coal (D) Burns with short, bluish, yellow-tipped flame producing very little smoke

Description : Anthracite coal (A) Contains more volatile matter than bituminous coal (B) Ignites more easily than bituminous coal (C) Is essentially a coking coal (D) Burns with short, bluish, yellow-tipped flame producing very little smoke

Last Answer : (D) Burns with short, bluish, yellow-tipped flame producing very little smoke

Theoretical flame temperature of a fuel is that temperature which is attained, when the fuel is completely burnt 'using theoretical amount of air in (A) Air (B) Oxygen (C) Either (A) or (B) (D) Either (A) or (B) without gain or loss of heat

Description : Theoretical flame temperature of a fuel is that temperature which is attained, when the fuel is completely burnt 'using theoretical amount of air in (A) Air (B) Oxygen (C) Either (A) or (B) (D) Either (A) or (B) without gain or loss of heat

Last Answer : (D) Either (A) or (B) without gain or loss of heat