Power is rate of doing work or the rate at which energy is supplied to the system. A constant force F is applied to a body of mass m.

Power is rate of doing work or the rate at which energy is supplied to the system. A constant force F is applied to a body of mass m.
by

1 Answer

Answer :

Power is rate of doing work or the rate at which energy is supplied to the system. A constant force F ... expression for power in terms of F, m and t.
by
selected by

Related questions

The heat supplied to the gaS at constant volume is (where m = Mass of gas, cv = Specific heat at constant volume, cp = Specific heat at constant pressure, T2 – T1 = Rise in temperature, and R = Gas constant)  A. mR(T2 – T1)  B. mcv(T2 – T1)  C. mcp(T2 – T1)  D. mcp(T2 + T1)

Description : The heat supplied to the gaS at constant volume is (where m = Mass of gas, cv = Specific heat at constant volume, cp = Specific heat at constant pressure, T2 – T1 = Rise in temperature, and R = Gas constant)  A. mR(T2 – T1)  B. mcv(T2 – T1)  C. mcp(T2 – T1)  D. mcp(T2 + T1)

Last Answer : Answer: B

is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) (B) f = (A/P) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Description : is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) ... ) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Last Answer : Answer: Option C

is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Description : is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Last Answer : Answer: Option C

What is the relation between mass and acceleration if the force applied to an object is constant ?

Description : What is the relation between mass and acceleration if the force applied to an object is constant ?

Last Answer : The lower the mass, the higher the acceleration.

A car is moving along a straight horizontal road at a speed of 20 meters per second. The brakes are applied and a constant force of 5000 Newtons decelerates the car to a stop in 10 seconds. The mass of the car is: w) 1250 kilograms x) 2500 kilograms y) 5000 kilograms z) 10,000 kilograms

Description : A car is moving along a straight horizontal road at a speed of 20 meters per second. The brakes are applied and a constant force of 5000 Newtons decelerates the car to a stop in 10 seconds. The mass of the car is: w) 1250 kilograms x) 2500 kilograms y) 5000 kilograms z) 10,000 kilograms

Last Answer : ANSWER: X -- 2500 KILOGRAMS

To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length of the pipe is 1506 m and f = 0.01, ignoring other minor losses and assuming the economical diameter from Lea's formula D = 1.2 Q, the water horse power of the pump is (A) 400 (B) 450 (C) 500(D) 600

Description : To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is  installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length  of the ... the water horse power of the pump is  (A) 400  (B) 450  (C) 500 (D) 600

Last Answer : (D) 600

A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (f n ), respectively, are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz

Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... , are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz

Last Answer : a) 0.471 and 1.19 Hz

A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (f n ), respectively, are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz

Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... .19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz

Last Answer : a) 0.471 and 1.19 Hz

The mechanical power developed by a shunt motor will be maximum when the ratio of back e.m.f. to applied voltage is?

Last Answer : The mechanical power developed by a shunt motor will be maximum when the ratio of back e.m.f. to applied voltage is 0.5.

The rate of change of moment of momentum represents the __________ by the fluid. (A) Torque applied (B) Force exerted (C) Work done (D) Power developed

Description : The rate of change of moment of momentum represents the __________ by the fluid. (A) Torque applied (B) Force exerted (C) Work done (D) Power developed

Last Answer : (A) Torque applied

Force applied on a body of mass 5 kg is directly proportional to the acceleration produced in the body. Represent this solution as a linear equation in two variables. -Maths 9th

Description : Force applied on a body of mass 5 kg is directly proportional to the acceleration produced in the body. Represent this solution as a linear equation in two variables. -Maths 9th

Last Answer : Solution :- Let the force be x and acceleration due to force be y.

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

A single degree of freedom spring-mass system is subjected to a harmonic force of constant amplitude. For an excitation frequency of √3k/m , the ratio of the amplitude of steady state response to the static deflection of the spring is __________ A. 0.2 B. 0.5 C. 0.8 D. None of the above

Description : A single degree of freedom spring-mass system is subjected to a harmonic force of constant amplitude. For an excitation frequency of √3k/m , the ratio of the amplitude of steady state response to the static deflection of the spring is __________ A. 0.2 B. 0.5 C. 0.8 D. None of the above

Last Answer : B. 0.5

A string of linear mass density 0.005 kg/m is stretched by a force F=2t^2 N

Description : A string of linear mass density 0.005 kg/m is stretched by a force F=2t^2 N

Last Answer : A string of linear mass density 0.005 kg/m is stretched by a force F=2t^2 N ( t is in sec) as shown in figure. ... 24.5 m/s C) 32 m/s D) 40 m/s

During short circuit test iron losses are negligible because A. The current on secondary side is negligible B. The voltage on secondary side does not vary C. The voltage applied on primary side is low D. Full-load current is not supplied to the transformer

Description : During short circuit test iron losses are negligible because A. The current on secondary side is negligible B. The voltage on secondary side does not vary C. The voltage applied on primary side is low D. Full-load current is not supplied to the transformer

Last Answer : C) the voltage applied on primary side is low

During short circuit test iron losses are negligible because A. The current on secondary side is negligible B. The voltage on secondary side does not vary C. The voltage applied on primary side is low D. Full-load current is not supplied to the transformer

Description : During short circuit test iron losses are negligible because A. The current on secondary side is negligible B. The voltage on secondary side does not vary C. The voltage applied on primary side is low D. Full-load current is not supplied to the transformer

Last Answer : C) the voltage applied on primary side is low

When the gas is heated at constant volume, the heat supplied increases the internal energy of the gas.  A.True  B.False

Description : When the gas is heated at constant volume, the heat supplied increases the internal energy of the gas.  A.True  B.False

Last Answer : Answer: A

In the nutritional support of patients with cancer, which of the following statements is/are true? A. Nutritional support benefits the patient's lean body mass but does not enable the tumor to grow. B. In experimental animals, the growth of implanted tumors is directly proportional to the amount of calories and protein supplied. C. Prospective randomized trials of nutritional support utilizing chemotherapy and radiation therapy have revealed benefits to patients receiving total parenteral nutrition. D. Studies of nutritional support for patients with cancer about to undergo surgery revealed decreased morbidity and mortality, especially morbidity from sepsis.

Description : In the nutritional support of patients with cancer, which of the following statements is/are true? A. Nutritional support benefits the patient's lean body mass but does not enable ... with cancer about to undergo surgery revealed decreased morbidity and mortality, especially morbidity from sepsis.

Last Answer : Answer: B DISCUSSION: The problem with the patient with cancer is a very vexing one. Clearly, one of the metabolic effects of cancer, cachexia, affects patients in the last quartile ... undoubtedly reveal that there are certain nutrients that tumors require, which probably should be best avoided

Evidence for the existence of energy level in atom is supplied by (a) Atomic numbers (b) Atomic radii (c) Spectral lines (d) Mass defects

Description : Evidence for the existence of energy level in atom is supplied by (a) Atomic numbers (b) Atomic radii (c) Spectral lines (d) Mass defects

Last Answer : Ans:(c)

A Term is either an individual constant (a 0-ary function), or a variable, or an n-ary function applied to n terms: F(t1 t2 ..tn). a) True b) False

Description : A Term is either an individual constant (a 0-ary function), or a variable, or an n-ary function applied to n terms: F(t1 t2 ..tn). a) True b) False

Last Answer : a) True

An insect of negligible mass is sitting on a block of mass M, tied with a spring of force constant K. The block performs simple harmonic motion with a

Description : An insect of negligible mass is sitting on a block of mass M, tied with a spring of force constant K. The block performs simple harmonic motion with a

Last Answer : An insect of negligible mass is sitting on a block of mass M, tied with a spring of force constant K. The block ... /2 sqrt(k/M)` D. `2A sqrt(k/M)`

Which of the following statements is incorrect? (a) The mass of a body is not the same as its weight (b) Mass is a measure of quantity of matter whereas weight is a force (c) Mass of a body varies from place to place but its weight remains constant (d) In the MKS system, mass is expressed in kilogram and weight in newton

Description : Which of the following statements is incorrect? (a) The mass of a body is not the same as its weight (b) Mass is a measure of quantity of matter whereas weight is a force (c) Mass of a ... but its weight remains constant (d) In the MKS system, mass is expressed in kilogram and weight in newton

Last Answer : Ans:(c)

Pick out the correct statement. (A) Bound moisture is removed during constant rate drying period (B) Free moisture is removed during falling rate drying period (C) The sum of free moisture and equilibrium moisture in a solid is called the critical moisture (D) The driving force for mass transfer in a wet solid is its free moisture content

Description : Pick out the correct statement. (A) Bound moisture is removed during constant rate drying period (B) Free moisture is removed during falling rate drying period (C) The sum of free moisture and ... (D) The driving force for mass transfer in a wet solid is its free moisture content

Last Answer : (D) The driving force for mass transfer in a wet solid is its free moisture content

Euler's equation of motion states, that at every point, the (A) Fluid momentum is constant (B) Force per unit mass equals acceleration (C) Rate of mass outflow is equal to the rate of mass inflow (D) None of these

Description : Euler's equation of motion states, that at every point, the (A) Fluid momentum is constant (B) Force per unit mass equals acceleration (C) Rate of mass outflow is equal to the rate of mass inflow (D) None of these

Last Answer : (B) Force per unit mass equals acceleration

Change in enthalpy of a system is the heat supplied at  (a) constant pressure  (b) constant temperature  (c) constant volume  (d) constant entropy  (e) N.T.P. condition.

Description : Change in enthalpy of a system is the heat supplied at  (a) constant pressure  (b) constant temperature  (c) constant volume  (d) constant entropy  (e) N.T.P. condition.

Last Answer : Answer : a

Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or load resistor B. noise factor expressed in decibels C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signal D. S/N of an ideal system divided by S/N at the output of the receiver or amplifier under test, both working at the same temperature over the same bandwidth and fed from the same source

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

A balanced three-phase, 50 Hz voltage is applied to a 3 phase, 4 pole, induction motor. When the motor is delivering rated output, the slip is found to be 0.05. The speed of the rotor m.m.f. relative to the rotor structure is (A) 1500 r.p.m. (B) 1425 r.p.m. (C) 25 r.p.m. (D) 75 r.p.m.

Description : A balanced three-phase, 50 Hz voltage is applied to a 3 phase, 4 pole, induction motor. When the motor is delivering rated output, the slip is found to be 0.05. The speed of the rotor m.m.f. relative to the rotor structure is (A) 1500 r.p.m. (B) 1425 r.p.m. (C) 25 r.p.m. (D) 75 r.p.m.

Last Answer : (D) 75 r.p.m.

Can a net force be applied to an object and still have the object maintain constant speed?

Description : Can a net force be applied to an object and still have the object maintain constant speed?

Last Answer : yes, as in the case of a satellite orbiting the earth; it is moving with constant speed but not constant velocity as its direction is always changing as it orbits. The net force is provided by gravity accelerating it inward and preventing into from flying away into space

What is the spring constant when it is stretched 1.5 meters when a force of 60 N is applied to it?

Description : What is the spring constant when it is stretched 1.5 meters when a force of 60 N is applied to it?

Last Answer : Just divide the force by the amount of stretch.

A train locomotive whose mass is 1 x 106 kilograms is traveling EAST at a speed of 100 kilometers per hour. A NORTHERLY wind is applying a force of 100 Newtons on the locomotive. How much work is the wind doing on the locomotive for each 10 meters it travels? w) 0 joules x) 1,000 joules y) 10,000 joules z) 100,000 joules

Description : A train locomotive whose mass is 1 x 106 kilograms is traveling EAST at a speed of 100 kilometers per hour. A NORTHERLY wind is applying a force of 100 Newtons on the locomotive. How much work is the wind doing ... 10 meters it travels? w) 0 joules x) 1,000 joules y) 10,000 joules z) 100,000 joules

Last Answer : ANSWER: W -- 0 JOULES

If the radius of rotation and the mass being kept constant how does centripetal force vary with the speed of rotation body?

Description : If the radius of rotation and the mass being kept constant how does centripetal force vary with the speed of rotation body?

Last Answer : Feel Free to Answer

The mass of a body is different from its weight because 1. mass is a variable quantity whereas weight is constant 2. mass varies very little at different places whereas weight varies a lot 3. mass is constant but weight decreases as the body moves from the poles to the equator 4. mass is a measure of the quantity of matter whereas weight is a force Which of the above statements is/are correct? (a) 1 only (b) 2 and 4 (c) 3 only (d) 3 and 4

Description : The mass of a body is different from its weight because 1. mass is a variable quantity whereas weight is constant 2. mass varies very little at different places whereas weight varies a lot 3. mass is constant but weight decreases as ... is/are correct? (a) 1 only (b) 2 and 4 (c) 3 only (d) 3 and 4

Last Answer : Ans:(d)

If the resultant force acting on a body of constant mass is zero, the body's acceleration is: w) increasing x) decreasing y) always zero z) negative.

Description : If the resultant force acting on a body of constant mass is zero, the body's acceleration is: w) increasing x) decreasing y) always zero z) negative.

Last Answer : ANSWER: Y -- ALWAYS ZERO 

If the resultant force acting on a body of constant mass is zero, the body's momentum is: w) increasing x) decreasing y) always zero z) constant

Description : If the resultant force acting on a body of constant mass is zero, the body's momentum is: w) increasing x) decreasing y) always zero z) constant

Last Answer : ANSWER: Z -- CONSTANT

Which of the following has the same unit as energy? (1) Power f(2) Density (3) Work (4) Force

Description : Which of the following has the same unit as energy? (1) Power f(2) Density (3) Work (4) Force

Last Answer : (3) Work Explanation: The SI unit of work is the joule (J), which is defined as the work expended by a force of one Newton through a displacement of one metre.

When the torque required by the machine is more than the torque supplied by the motor, the flywheel is (A) Accelerated (B) Retarded (C) Rotating with constant speed (D) Any of the above

Description : When the torque required by the machine is more than the torque supplied by the motor, the flywheel is (A) Accelerated (B) Retarded (C) Rotating with constant speed (D) Any of the above

Last Answer : (B) Retarded

The cycle in which heat is supplied at constant volume and rejected at constant pressure is known as

Description : The cycle in which heat is supplied at constant volume and rejected at constant pressure is known as  (a) Dual combustion cycle  (b) Diesel cycle  (c) Atkinson cycle  (d) Rankine cycle  (e) Stirling cycle.

Last Answer : Answer : c

Fatty acids are a major energy source for the body. Which of the following statement(s) is/are true concerning the use of fatty acids as an energy source? a. Fatty acids are stored in adipocytes as triglycerides b. Hormone-sensitive lipase is present only in adipose tissue c. Fatty acids are released into the circulation traveling freely in plasma d. Approximately 25% of total nonprotein caloric needs supplied via total parenteral nutrition should be in the form of fat

Description : Fatty acids are a major energy source for the body. Which of the following statement(s) is/are true concerning the use of fatty acids as an energy source? a. Fatty acids are stored in ... 25% of total nonprotein caloric needs supplied via total parenteral nutrition should be in the form of fat

Last Answer : Answer: a, b, d In most tissues, fatty acids are readily oxidized for energy. They are especially important energy sources for the heart, liver and skeletal muscle. In ... administered to patients receiving total parenteral nutrition should comprise about 5-30% of total nonprotein caloric needs

If A bicycle has a mass of 20 kg. A small car has a mass of 1000 kg. A force is applied to accelerate the car from a standing position to a speed of 1 ms. If the same force that was applied to the car?

Description : If A bicycle has a mass of 20 kg. A small car has a mass of 1000 kg. A force is applied to accelerate the car from a standing position to a speed of 1 ms. If the same force that was applied to the car?

Last Answer : Need answer

When a periodic disturbing force is applied to a machine, the force is transmitted to the ___________ by the means of spring. (A) dampers (B) foundation (C) mass (D) none of the above

Description : When a periodic disturbing force is applied to a machine, the force is transmitted to the ___________ by the means of spring. (A) dampers (B) foundation (C) mass (D) none of the above

Last Answer : (B) foundation

A 10 kilogram mass rests on a horizontal frictionless surface. A horizontal force of 5 Newtons is applied to the mass. After the force has been applied for 1 second, the velocity of the mass is: w) 0 meters per second x) 0.5 meters per second y) 5 meters per second z) 50 meters per second

Description : A 10 kilogram mass rests on a horizontal frictionless surface. A horizontal force of 5 Newtons is applied to the mass. After the force has been applied for 1 second, the velocity of the mass is: w) 0 meters per second x) 0.5 meters per second y) 5 meters per second z) 50 meters per second

Last Answer : ANSWER: X -- 0.5 METERS PER SECOND

The work done by a system is `8J`, when `40J` heat is supplied to it. Calculate the increases in internal energy of system.

Description : The work done by a system is `8J`, when `40J` heat is supplied to it. Calculate the increases in internal energy of system.

Last Answer : The work done by a system is `8J`, when `40J` heat is supplied to it. Calculate the increases in internal energy of ... J B. 40 J C. 48 J D. `-32 J`

A spring with a force constant of 20 newtons per meter is known to obey Hooke's Law. The spring is attached to a mass of 5 kilograms and placed on a horizontal, frictionless surface. The mass is displaced 3 meters from its equilibrium position and released. What is the kinetic energy of the mass as it passes through its equilibrium position?

Description : A spring with a force constant of 20 newtons per meter is known to obey Hooke's Law. The spring is attached to a mass of 5 kilograms and placed on a horizontal, frictionless surface. The ... and released. What is the kinetic energy of the mass as it passes through its equilibrium position? 

Last Answer : ANSWER: 90 JOULES

Reduction in vibration amplitude after one complete cycle of single degree free vibration with dry friction damping is_____, if where F"= frictional force between mass and surface and k =stiffness of the system. a)4F/k a b) 2f/K C) 3F/k D)8F/k

Description : Reduction in vibration amplitude after one complete cycle of single degree free vibration with dry friction damping is_____, if where F"= frictional force between mass and surface and k =stiffness of the system. a)4F/k a b) 2f/K C) 3F/k D)8F/k

Last Answer : a)4F/k

If the force applied on the body displaces it in the opposite direction of applied force, then the work done is : -Science

Description : If the force applied on the body displaces it in the opposite direction of applied force, then the work done is : -Science

Last Answer : Work can be either positive or negative: if the force has a component in the same direction as the displacement of the object, the force is doing positive work. If the force has a component in the direction opposite to the displacement, the force does negative work.

The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Description : The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Last Answer : Specific Heat Capacity

Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. B. Continuous cardiac output monitoring by the thermodilution method requires continuous infusion of fluid injectate at a constant rate and temperature. C. The major advantage of the Fick method over the thermodilution method of calculating cardiac output is that it is noninvasive, requiring only the determination of oxygen consumption by respiratory gas analysis. D. The technique of thoracic electrical bioimpedance utilizes sensors to determine stroke volume by detecting changes in resistance to a small, applied alternating current.

Description : Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. ... stroke volume by detecting changes in resistance to a small, applied alternating current.

Last Answer : Answer: AD DISCUSSION: Various techniques are available to measure cardiac output continuously. The advantages of continuous cardiac output monitoring, as compared with intermittent methods, are (1) ... function of the stroke volume, which then can be used to calculate the cardiac output

A weight of 50 N is suspended from a spring of stiffness 4000N/m and subjected to a harmonic force of magnitude 60N and frequency 60 Hz. what will be the static displacement of the spring due to maximum applied force A. 0.015m B. 0.15 m C. 15 m D. 150m

Description : A weight of 50 N is suspended from a spring of stiffness 4000N/m and subjected to a harmonic force of magnitude 60N and frequency 60 Hz. what will be the static displacement of the spring due to maximum applied force A. 0.015m B. 0.15 m C. 15 m D. 150m

Last Answer : B. 0.15 m

A circular loop of mass m and radius r in X-Y plane of a horizontal table as shown in figure. A uniform magnetic field B is applied parallel to X-axis

Description : A circular loop of mass m and radius r in X-Y plane of a horizontal table as shown in figure. A uniform magnetic field B is applied parallel to X-axis

Last Answer : A circular loop of mass m and radius r in X-Y plane of a horizontal table as shown in figure. A uniform ... . `(mg)/(2pirB)` D. `(pirB)/(mgl)`

A force of 100 Newtons acts for 0.5 seconds on a body of mass 20 kg which is initially at rest. The velocity attained by the body is a.20 m/s b.5 m/s c.2.5 m/s d.0.5 m/s e.107 dynes

Description : A force of 100 Newtons acts for 0.5 seconds on a body of mass 20 kg which is initially at rest. The velocity attained by the body is a.20 m/s b.5 m/s c.2.5 m/s d.0.5 m/s e.107 dynes

Last Answer : c. 2.5 m/s