IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5,
5e or 6 cabling known as ....................
A) 1000 BASE-T
B) 1000 BASE-SX
C) 1000 BASE-LX
D) 1000 BASE-CX
by

1 Answer

Answer :

A) 1000 BASE-T
by

Related questions

IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

Last Answer : A) 1000 BASE-T

IEEE 802.3ab defines Gigabit Ethernet transmission over unshieldedtwisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX

Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX

Last Answer : a. 1000 BASE-T

Which of the following are Gigabit Ethernets? A) 1000 BASE-SX B) 1000 BASE-LX C) 1000 BASE-CX D) All of the above

Description : Which of the following are Gigabit Ethernets? A) 1000 BASE-SX B) 1000 BASE-LX C) 1000 BASE-CX D) All of the above

Last Answer : D) All of the above

Which of the following are Gigabit Ethernets? A) 1000 BASE-SX B) 1000 BASE-LX C) 1000 BASE-CX D) All of above

Description : Which of the following are Gigabit Ethernets? A) 1000 BASE-SX B) 1000 BASE-LX C) 1000 BASE-CX D) All of above

Last Answer : D) All of above

Which of the following are Gigabit Ethernets? A) 1000 BASE-SX B) 1000 BASE-LX C) 1000 BASE-CX D) All of the above

Description : Which of the following are Gigabit Ethernets? A) 1000 BASE-SX B) 1000 BASE-LX C) 1000 BASE-CX D) All of the above

Last Answer : D) All of the above

Give any two disadvantages of unshielded twisted pair cable.

Description : Give any two disadvantages of unshielded twisted pair cable.

Last Answer : Disadvantages of unshielded twisted pair cable. 1. Highly prone to crosstalk. 2. Unable to provide secured transmission of data.

In a fast Ethernet cabling, 100 Base-TX uses ........... cable and maximum segment size is ............ (A) twisted pair, 100 metres (B) twisted pair, 200 metres (C) fibre optics, 1000 metres (D) fibre optics, 2000 metres

Description : In a fast Ethernet cabling, 100 Base-TX uses ........... cable and maximum segment size is ............ (A) twisted pair, 100 metres (B) twisted pair, 200 metres (C) fibre optics, 1000 metres (D) fibre optics, 2000 metres

Last Answer : (A) twisted pair, 100 metres

is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbits/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Description : is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbits/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Last Answer : B) Fast Ethernet

s the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4 D) 100 BASE-T2

Description : s the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4 D) 100 BASE-T2

Last Answer : B) 100 BASE-TX

8............. was the first step in the evolution of Ethernet from a coaxial cable bus to hubmanaged, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Description : 8............. was the first step in the evolution of Ethernet from a coaxial cable bus to hubmanaged, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Last Answer : A) Star LAN

_________ uses four twisted pairs. A) 1000Base-SX B) 1000Base-LX C) 1000Base-T D) none of the above

Description : _________ uses four twisted pairs. A) 1000Base-SX B) 1000Base-LX C) 1000Base-T D) none of the above

Last Answer : 1000Base-T

The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Last Answer : 1-persistent

1000Base-SX, 1000Base-LX, and 1000Base-CX use _________ block coding and ________ line coding. A) 4B/5B; NRZ B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ

Description : 1000Base-SX, 1000Base-LX, and 1000Base-CX use _________ block coding and ________ line coding. A) 4B/5B; NRZ B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ

Last Answer : 8B/10B; NRZ

A simple cabling method, known as the..................topology allows about 30 computers on a maximum cable length of about 600 feet. A) Ring B) Bus C) Star D) Mesh

Description : A simple cabling method, known as the..................topology allows about 30 computers on a maximum cable length of about 600 feet. A) Ring B) Bus C) Star D) Mesh

Last Answer : Bus

What kind of transmission medium is most appropriate to carry data in a computer network that is exposed to electrical interferences? a) Unshielded twisted pair b) Optical fiber c) Coaxial cable d) Microwave

Description : What kind of transmission medium is most appropriate to carry data in a computer network that is exposed to electrical interferences? a) Unshielded twisted pair b) Optical fiber c) Coaxial cable d) Microwave

Last Answer : b) Optical fiber

Identify the non suitable medium for 802.3 ethernet?a. A thin coaxial cable b. A twisted pair cable c. A microwave link d. A fiber optical cable

Description : Identify the non suitable medium for 802.3 ethernet? a. A thin coaxial cable b. A twisted pair cable c. A microwave link d. A fiber optical cable

Last Answer : c. A microwave link

Which of the following cannot be used as a medium for 802.3 ethernet? a) A thin coaxial cable b) A twisted pair cable c) A microwave link d) A fiber optical cable

Description : Which of the following cannot be used as a medium for 802.3 ethernet? a) A thin coaxial cable b) A twisted pair cable c) A microwave link d) A fiber optical cable

Last Answer : c) A microwave link

802.3 is the standard for 10BASE5 Ethernet that uses ___________ cable as shared medium. A. Twisted pair cable B. Coaxial cable C. Fiber optic cable D. None of the above

Description : 802.3 is the standard for 10BASE5 Ethernet that uses ___________ cable as shared medium. A. Twisted pair cable B. Coaxial cable C. Fiber optic cable D. None of the above 

Last Answer : B. Coaxial cable 

Which one of the following media is multidrop? (A) Shielded Twisted pair cable (B) Unshielded Twisted pair cable (C) Thick Coaxial cable (D) Fiber Optic cable

Description : Which one of the following media is multidrop? (A) Shielded Twisted pair cable (B) Unshielded Twisted pair cable (C) Thick Coaxial cable (D) Fiber Optic cable

Last Answer : (C) Thick Coaxial cable

Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth a. i-b, ii-c, iii-d, iv-a b. i-c, ii-d, iii-a, iv-b c. i-c, ii-a, iii-d, iv-b d. i-b, ii-d, iii-c, iv-a

Description : Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth a. i-b, ii-c, iii-d, iv-a b. i-c, ii-d, iii-a, iv-b c. i-c, ii-a, iii-d, iv-b d. i-b, ii-d, iii-c, iv-a

Last Answer : c. i-c, ii-a, iii-d, iv-b

Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocolc. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network

Description : Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocol c. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network

Last Answer : CSMA/CD is not suitable for a high propagation delay

What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit

Description : What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit

Last Answer : a. 1 byte

Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth A) i-b, ii-c, iii-d, iv-a B) i-c, ii-d, iii-a, iv-b C) i-c, ii-a, iii-d, iv-b D) i-b, ii-d, iii-c, iv-a

Description : Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth A) i-b, ii-c, iii-d, iv-a B) i-c, ii-d, iii-a, iv-b C) i-c, ii-a, iii-d, iv-b D) i-b, ii-d, iii-c, iv-a

Last Answer : C) i-c, ii-a, iii-d, iv-b

_____________ is a collection of wired Ethernet standard for the link layer. A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4

Description : _____________ is a collection of wired Ethernet standard for the link layer. A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4

Last Answer : A. IEEE 802.3 

_______uses two optical fibers anda long-wavelaser source. A) 1000Base-SX B) 1000Base-LX C) 1000Base-T D) none of the above

Description : _______uses two optical fibers anda long-wavelaser source. A) 1000Base-SX B) 1000Base-LX C) 1000Base-T D) none of the above

Last Answer : 1000Base-LX

______ uses two optical fibers and a short-wave laser source, A) 1000Base-SX B) 1000Base-LX C) 1000Base-T D) none of the above

Description : ______ uses two optical fibers and a short-wave laser source, A) 1000Base-SX B) 1000Base-LX C) 1000Base-T D) none of the above

Last Answer : 1000Base-LX

The IEEE 802.11standardfor wireless LANs defines twoservices: ______and_______. A) BSS; ASS B) ESS; SSS C) BSS; ESS D) BSS; DCF

Description : The IEEE 802.11standardfor wireless LANs defines twoservices: ______and_______. A) BSS; ASS B) ESS; SSS C) BSS; ESS D) BSS; DCF

Last Answer : BSS; ESS

IEEE 802.1d specification, defines _________criteria for a transparent bridges. A) two B) three C) four D) none of the above

Description : IEEE 802.1d specification, defines _________criteria for a transparent bridges. A) two B) three C) four D) none of the above

Last Answer : three

Gigabit Ethernet has a datarate of________Mbps. A) 10 B) 100 C) 1000 D) 10,000

Description : Gigabit Ethernet has a datarate of________Mbps. A) 10 B) 100 C) 1000 D) 10,000

Last Answer : 1000

………………….. is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbit/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Description : ………………….. is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbit/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Last Answer : B) Fast Ethernet

............ is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbits/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Description : ............ is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbits/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Last Answer : B) Fast Ethernet

In IEEE 802.11, a___ is made of stationary or mobile wireless stations and anoptional central base station, known as the access point (AP). A) ESS B) BSS C) CSS D) none of the above

Description : In IEEE 802.11, a___ is made of stationary or mobile wireless stations and anoptional central base station, known as the access point (AP). A) ESS B) BSS C) CSS D) none of the above

Last Answer : BSS

is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. a. 100 BASE-T b. 100 BASE-TX c. 100 BASE-T4 d. 100 BASE-T2

Description : is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. a. 100 BASE-T b. 100 BASE-TX c. 100 BASE-T4 d. 100 BASE-T2

Last Answer : b. 100 BASE-TX

.......... is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4

Description : .......... is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4

Last Answer : B) 100 BASE-TX

Which IEEE standards specify the technologies for wireless LANs 802.11 a. IEEE 802.11 b. IEEE 802.10 c. IEEE 279.6 d. IEEE 275.4

Description : Which IEEE standards specify the technologies for wireless LANs 802.11 a. IEEE 802.11 b. IEEE 802.10 c. IEEE 279.6 d. IEEE 275.4

Last Answer : a. IEEE 802.11

Which IEEE standards specify the technologies for wireless LANs 802.11 a. IEEE 802.11 b. IEEE 802.10 c. IEEE 279.6 d. IEEE 275.4

Description : Which IEEE standards specify the technologies for wireless LANs 802.11 a. IEEE 802.11 b. IEEE 802.10 c. IEEE 279.6 d. IEEE 275.4

Last Answer : a. IEEE 802.11

was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. a. Star LAN b. Ring LAN c. Mesh LAN d. All of the above

Description : was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. a. Star LAN b. Ring LAN c. Mesh LAN d. All of the above

Last Answer : a. Star LAN

....... was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Description : ....... was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Last Answer : A) Star LAN

What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second ) Baud

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) BaudC) Bits per second D) Both B and C

Last Answer : B) Baud

The performance of data communications network depends on .............. A) Number of users B) The hardware and software C) The transmission D) All of the above

Description : The performance of data communications network depends on .............. A) Number of users B) The hardware and software C) The transmission D) All of the above

Last Answer : D) All of the above

State the factors to be considered for selecting transmission media.

Description : State the factors to be considered for selecting transmission media.

Last Answer : Eight factors to be considered:  1. Type of medium.  2. No of conductors/connectors.  3. Flexibility.  4. Durability.  5. Bandwidth.  6. Reliability of connection  7. Required ... parallel wires  12. Resistance to external EMI outside the cable.  13. Attenuation characteristics  14. Cost

Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Description : Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

In _________, autonegotiation allows two devices to negotiate the mode or datarate of operation. A) Standard B) Fast Ethernet C) Gigabit Ethernet D) Ten-Gigabit Ethernet

Description : In _________, autonegotiation allows two devices to negotiate the mode or datarate of operation. A) Standard B) Fast Ethernet C) Gigabit Ethernet D) Ten-Gigabit Ethernet

Last Answer : Fast Ethernet

A commonly used fiber-based system for LANs is: a. FDDI b. high-speed Ethernet c. gigabit Ethernet d. all of the above

Description : A commonly used fiber-based system for LANs is: a. FDDI b. high-speed Ethernet c. gigabit Ethernet d. all of the above

Last Answer : d. all of the above

Differentiate fast Ethernet and gigabit Ethernet.

Description : Differentiate fast Ethernet and gigabit Ethernet.

Last Answer : 00-Mbps version called Fast Ethernet. 1000-Mbps version called Gigabit Ethernet. Both 100-Mbps and 1000-Mbps Ethernets are designed to be used in full-duplex, point-to-point configurations, which mean that they are typically used in switched networks.

The original IEEE 802.11,has a data rate of _____Mbps. A) 1 B) 6 C) 11 D) 22

Description : The original IEEE 802.11,has a data rate of _____Mbps. A) 1 B) 6 C) 11 D) 22

Last Answer : 1

Which of the following WLAN standard has been named Wi-Fi? a) IEEE 802.6 b) IEEE 802.15.4 c) DSSS IEEE 802.11b d) IEEE 802.11g

Description : Which of the following WLAN standard has been named Wi-Fi? a) IEEE 802.6 b) IEEE 802.15.4 c) DSSS IEEE 802.11b d) IEEE 802.11g

Last Answer : c) DSSS IEEE 802.11b

IEEE 802.11 standards provide data rates ______________ A. 10 Gbit/s. B. 1 Gbit/s C. 1 Mb/s to up to 6.75 Gb/s D. 250 Kb/s

Description : IEEE 802.11 standards provide data rates ______________ A. 10 Gbit/s. B. 1 Gbit/s C. 1 Mb/s to up to 6.75 Gb/s D. 250 Kb/s

Last Answer : C. 1 Mb/s to up to 6.75 Gb/s 

The power flow problem mathematical model for a linear transmission network

Description : The power flow problem mathematical model for a linear transmission network (A) is non-linear (B) is linear (C) considers time variation of generation (D) does not consider tap-changing transformers

Last Answer : The power flow problem mathematical model for a linear transmission network is non-linear

A firewall is installed at the point where the secure internal network and untrusted external network meet which is also known as ……………… A) Chock point B) meeting point C) firewall point D) secure point

Description : A firewall is installed at the point where the secure internal network and untrusted external network meet which is also known as ……………… A) Chock point B) meeting point C) firewall point D) secure point

Last Answer : A) Chock point