State any four methods to reduce friction.

State any four methods to reduce friction.
by

1 Answer

Answer :

State any four methods to reduce friction.
by
selected by

Related questions

Define stress concentration. Explain any four methods to reduce it with neat sketch.

Description : Define stress concentration. Explain any four methods to reduce it with neat sketch.

Last Answer : ) The Standard cross section for a flat key, which is fitted on a 50mm diameter shaft, is 16×10mm. The  key is transmitting 475 Nm torque from the shaft to the hub. The key is made of commercial steel  (Syt=Syc=230 N/mm2). Determine the length of the key, if the factor of safety is 3.

Describe any four methods used to reduce earth resistance.

Description : Describe any four methods used to reduce earth resistance.  

Last Answer : To reduce earth resistance following steps/methods are necessary: 1. Earth pit of more depth & width- breadth should be made. 2. Use of higher size/cross section of earthing material like ... galvanized. 12. Electrodes should be placed in the earth in the upright vertical position. 

A man wished to move a block of size 3 m x 3 m weighing 80 kg. The coefficient of friction between the block and the ground is 0.27. Which of the following methods should be used? a.Slide along the ground by pushing b.Ask for cranes c.Pull it d.Tip it over e.Lift it bodily

Description : A man wished to move a block of size 3 m x 3 m weighing 80 kg. The coefficient of friction between the block and the ground is 0.27. Which of the following methods should be used? a.Slide along the ground by pushing b.Ask for cranes c.Pull it d.Tip it over e.Lift it bodily

Last Answer : d. Tip it over

How to reduce friction ?

Description : How to reduce friction ?

Last Answer : The main cause of friction is uneven surface. The high notch of any one of them gets stuck in the arteries and causes friction. Therefore the surface is smoothed as much as possible to reduce friction ... are also used to keep uneven surfaces out of contact with each other for long periods of time.

What is used to reduce the friction of rotating parts of a car ?

Description : What is used to reduce the friction of rotating parts of a car ?

Last Answer : : Lubricants are used to reduce the friction of the rotating parts of the car.

What liquid is used to reduce friction?

Description : What liquid is used to reduce friction?

Last Answer : What is the answer ?

What is the substance such as oil or grease that is used to reduce friction.?

Description : What is the substance such as oil or grease that is used to reduce friction.?

Last Answer : What is the answer ?

why it is important to reduce friction at movable joint?

Description : why it is important to reduce friction at movable joint?

Last Answer : friction will resist smooth motion at a moveable joint so reducing friction allows joint to move freely

Ball bearings are used in cycles, scooters etc. to _____. A. Reduce the friction between the wheel and the axle B. Increase the friction between the wheel and the axle C. Reduce the friction between ground and the wheel D. None of these

Description : Ball bearings are used in cycles, scooters etc. to _____. A. Reduce the friction between the wheel and the axle B. Increase the friction between the wheel and the axle C. Reduce the friction between ground and the wheel D. None of these

Last Answer : ANSWER: A

The purpose of lubrication in an antifriction bearing is (a) to reduce the friction between balls and races (b) dissipation of frictional heat prevention of corrosion (c) protection of the bearing from dirt and other foreign particles (d) all of the mentioned

Description : The purpose of lubrication in an antifriction bearing is (a) to reduce the friction between balls and races (b) dissipation of frictional heat prevention of corrosion (c) protection of the bearing from dirt and other foreign particles (d) all of the mentioned

Last Answer : (d) all of the mentioned

The ball bearings are provided with a cage (a) to reduce friction (b) to facilitate slipping of balls (c) to prevent the lubricant from flowing out (d) to maintain the balls at a fixed distance apart

Description : The ball bearings are provided with a cage (a) to reduce friction (b) to facilitate slipping of balls (c) to prevent the lubricant from flowing out (d) to maintain the balls at a fixed distance apart

Last Answer : (d) to maintain the balls at a fixed distance apart

We often sprinkle talcum powder on the carom board . This is done to reduce ______ between the board and the striker. a) friction b)movement c)speed d)contact

Description : We often sprinkle talcum powder on the carom board . This is done to reduce ______ between the board and the striker. a) friction b)movement c)speed d)contact

Last Answer : a) friction

________ is a substance that can reduce the force of friction between the two surface in contact. a) lubricant b)paste c)water d)push

Description : ________ is a substance that can reduce the force of friction between the two surface in contact. a) lubricant b)paste c)water d)push

Last Answer : a) lubricant

A ball bearing is used in shafts of motors, dynamos to reduce ______. a) movement b)friction c)speed d)none

Description : A ball bearing is used in shafts of motors, dynamos to reduce ______. a) movement b)friction c)speed d)none

Last Answer : b)friction

The armature of a dc machine is laminated to reduce: (A) Eddy current loss (B) Hysteresis loss (C) copper losses (D) friction and windage losses

Description : The armature of a dc machine is laminated to reduce: (A) Eddy current loss (B) Hysteresis loss (C) copper losses (D) friction and windage losses

Last Answer : Ans: A Thinner the laminations, greater is the resistance offered to the induced e.m.f., smaller the current and hence lesser the I2R loss in the core.

State four laws of static friction.

Description : State four laws of static friction. 

Last Answer : 1. The frictional force is always acts tangential to the plane of contact and in the opposite direction of motion. 2. When the body is in limiting equilibrium, the ratio of limiting friction to ... is a self-adjusting force and it increases as the applied force increases up to limiting friction. 

What are some methods to reduce belly fat?

Description : What are some methods to reduce belly fat?

Last Answer : There are many ways to reduce belly fat. Exercise, eating less fatty foods are among the popular ways to reduce belly fat. Also, reducing stress through therapy or yoga is another way to reduce belly fat.

What are the methods adopted to reduce harmonic torques?

Description : What are the methods adopted to reduce harmonic torques?

Last Answer : The methods used for reduction or elimination of harmonic torques are chording, integral slot winding, skewing and increasing the length of air gap.

New methods used in chemistry which aim to reduce pollution are called?

Description : New methods used in chemistry which aim to reduce pollution are called?

Last Answer : Green Chemistry

Which of the following methods is most commonly used to reduce information risk? a. Allow all users to prepare the statements. b. Allow users to verify information. c. Have the financial statements audited. d. Users share information risk with management.

Description : Which of the following methods is most commonly used to reduce information risk? a. Allow all users to prepare the statements. b. Allow users to verify information. c. Have the financial statements audited. d. Users share information risk with management.

Last Answer : Have the financial statements audited

Which of the following methods is most commonly used to reduce information risk? a. Allow users to verify information. b. Allow all users to prepare the statements. c. Users share information risk with management. d. Have the financial statements audited

Description : Which of the following methods is most commonly used to reduce information risk? a. Allow users to verify information. b. Allow all users to prepare the statements. c. Users share information risk with management. d. Have the financial statements audited

Last Answer : Have the financial statements audited

Point out the correct statement. a) Mapper maps input key/value pairs to a set of intermediate key/value pairs b) Applications typically implement the Mapper and Reducer interfaces to provide the map and reduce methods c) Mapper and Reducer interfaces form the core of the job d) None of the mentioned

Description : Point out the correct statement. a) Mapper maps input key/value pairs to a set of intermediate key/value pairs b) Applications typically implement the Mapper and Reducer interfaces to provide the map and ... methods c) Mapper and Reducer interfaces form the core of the job d) None of the mentioned

Last Answer : None of the mentioned

Point out the wrong statement. a) A MapReduce job usually splits the input data-set into independent chunks which are processed by the map tasks in a completely parallel manner b) The MapReduce framework operates exclusively on <key, value> pairs c) Applications typically implement the Mapper and Reducer interfaces toprovide the map and reduce methods d) None of the mentioned

Description : Point out the wrong statement. a) A MapReduce job usually splits the input data-set into independent chunks which are processed by the map tasks in a completely parallel manner b) The ... implement the Mapper and Reducer interfaces toprovide the map and reduce methods d) None of the mentioned

Last Answer : None of the mentioned

What Are The Methods To Reduce The Effects Of Particulates?

Description : What Are The Methods To Reduce The Effects Of Particulates?

Last Answer : The effects of particulates can be reduced by the following methods.  Coal cleaning.  Using improved electrostatic precipitator design.  Controlling the dust within allowable limit. This can be done by increasing the height of chimney thereby reducing the concentration.

------ pricing is possible when a firm is able to reduce its manufacturing costs at a predictable rate through improved methods, materials, skills, and machinery. A)experience -curve B)price leader C)manufacturing based D)production -curve

Description : ------ pricing is possible when a firm is able to reduce its manufacturing costs at a predictable rate through improved methods, materials, skills, and machinery. A)experience-curve B)price leader C)manufacturing based D)production-curve

Last Answer : A)experience-curve

Which of the following methods may be adopted to reduce the effects of armature reaction ? (a) Increase in length of air gap at pole tips (b) Increasing reluctance of pole tips (c) Compensating windings (d) Interpoles (e) All of the above

Description : Which of the following methods may be adopted to reduce the effects of armature reaction ? (a) Increase in length of air gap at pole tips (b) Increasing reluctance of pole tips (c) Compensating windings (d) Interpoles (e) All of the above

Last Answer : (e) All of the above

Methods to reduce power consumption of air compressor

Description : Methods to reduce power consumption of air compressor

Last Answer : 1. Cooling cylinder by spraying water during compression stroke. 2. Circulation of water surrounding to cylinder by providing jackets 3. Installing inter cooler between two cylinders 4. Providing greater ... of cylinder proportions i.e. short stroke and large bore in construction with sleeve valve

List any four methods of string class and state the use of each.

Description : List any four methods of string class and state the use of each.

Last Answer : The java.lang.String class provides a lot of methods to work on string. By the help of these methods, We can perform operations on string such as trimming, concatenating, converting, comparing, replacing ... " System.out.println(s2); Output: Kava is a programming language. Kava is a platform.

List any four methods of plotting a compass traverse survey & explain any one in brief. Also state the meaning of adjustment of closing error of traverse.

Description : List any four methods of plotting a compass traverse survey & explain any one in brief. Also state the meaning of adjustment of closing error of traverse.

Last Answer : Methods of plotting compass traverse are: 1. By parallel meridian through each station. 2. By included angle. 3. By paper protractor. 4. By rectangular co-ordinates. 5. ... . 5. Finally join new points to get corrected traverse ABCDEA after graphical adjustment of closing error. 

State four methods to improve fuel economy of a vehicle.

Description : State four methods to improve fuel economy of a vehicle.

Last Answer : Answer: Methods of improving fuel economy.  1) Use of multi-functional fuel additives will provide 3 to 4% fuel economy. 2) Good driving habits. 3) Properly maintained fuel supply ... computer controlled ignition system. 6) Use of higher voltage automotive electrical system (42 volts system).

State any four methods to find water content of soil sample.

Description : State any four methods to find water content of soil sample. 

Last Answer : The direct determination of moisture content can be made by a) Oven drying b) Infrared c) Sand bath method. The indirect method are a) Calcium carbide b) Penetration resistance (proctor needle) c) Nuclear d) Pycnometer 

State the factors affecting compaction. State four equipments used for field methods of compaction. Also state its suitability.

Description : State the factors affecting compaction. State four equipments used for field methods of compaction. Also state its suitability.

Last Answer : Factors affecting compaction: i) Type of soil ii) Amount of compaction iii) Water content iv) Admixtures v) Method of compaction Equipment used for compaction with suitability. i) Compaction ...  Suitability: Suitable for compacting granular soils with no fines in layer up to 1 m thickness.

State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) Minimum clearance between cable and water pipe line when running in parallel. (iii) If cable is laid through pipe what should be diameter of pipe. (iv) When more than one cable is to be laid in the same trench, what should be minimum spacing between two cables ?

Description : State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) ... is to be laid in the same trench, what should be minimum spacing between two cables ?  

Last Answer : (i) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr. (ii) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr ... should be minimum spacing between two cables :- Then minimum 30 cm spacing is provided between 2 cables