Description : Faucet A basically used as inlet pipe and Faucet B is used as outlet pipe. Faucet A and B both are opened simultaneously, all the time. When Faucet A fills the tank and Faucet B empty the tank, it will take thrice the ... efficiency of Faucet A and Faucet B respectively? a) 1:2 b) 2:1 c) 1:3 d) 3:1
Last Answer : B Efficiency when both pipes used to fill = A + B And efficiency when Faucet A is used to fill and Faucet B is used to empty the tank = A-B So (A+B)/(A-B)=3/1 A/B+1/(A/B-1)=3/1 A/B+1=3(A/B-1) 3A/B-A/B=4 2A/B=4 A/B=2 Thus, the ratio of efficiency of Faucet A and B =2:1
Description : 24 pumps are connected to a tank. Some of them are inlet pumps and the others are outlet pumps. Each of the inlet pumps an fill the tank in 16hours and each of the outlet pumps can empty the tank completely in ... gets filled in 48 hours. How many inlet pumps are there? A) 16 B) 18 C) 17 D) 14
Last Answer : D (x/16)-[(24-x)/12] = 1/48 x/16-24/48+x/12=1/48 (3+4)x/48=97/48 7x/48=97/48 7x=97 X=14
Description : Two pipes X and Y can fill a tank in 6 hours and 8 hours respectively while another pipe Z can empty the tank in 4.8 hours. If all the three pipes are
Last Answer : Two pipes X and Y can fill a tank in 6 hours and 8 hours respectively while another pipe Z can ... then the time in which the tank can be filled.
Description : Two pipe P & Q fill a tab in 5 hrs and 20 hrs respectively. If both the pipes are open then due to the leakage, it took 30mins more to fill the tab. If the tab is full, how long will it take for the leakage alone to empty the tank? A) 28 B) 24 C) 36 D) 12
Last Answer : C Part filled by(P+Q) in 1 hr = 1/5 + 1/20 = ¼ So P & Q together can fill the tank in 4 hrs. Work done by the leak in 1 hr = 1 / 4 - 2/9 Leak will empty the tank in 36 hrs.
Description : Two pipes A and B can fill a tank in 5 and 6hrs.Pipe C can empty it in 12hrs.If all the 3 pipes are opened together,then the tank will be filled in 1)1(13/17)hrs 2)2(8/11)hours. 3)3(9/17)hrs 4)4(1/2)hrs
Last Answer : 3)3(9/17)hrs Exp:Net part filled in 1hr=>(1/5+1/6-1/12)=17/60 Tank filled in=60/17=3(9/17).
Description : Pipe A can fill a water tank in 8 hours, Pipe B can fill the same tank in 12 hours and Pipe C can empty the tank in 24 hours. If all three pipes are opened together, in how many hours will the tank be completely filled or empty? a) 4.8 hours b) 5 hours c) 5.4 hours d) 6 hours e) 7.2 hours
Last Answer : If all the three pipes are opened together, in one hour they will fill 1/8 + 1/12 – 1/24 = (3+2-1)/24 = 1/6 part of tank. So, to fill it completely it will take 6 hours. Answer is: d)
Description : Two pipes fills a tank in 12 hours and 15 hours respectively while a third pipe empties the tank in 18 hours. !f all three pipes operate simultaneously, in what time will the tank be full? a) 10 hours b) 10 10/17 hours c) 11 hours d) 9 hours e) 12 1/17 hours
Last Answer : b) 10 10/17 hours
Description : Two pipes can fill a tank in 20 and 24 minutes respectively and another pipe can empty 3 gallons per minute. All the three pipes working together can fill the tank in 15 minutes. The capacity of the tank in gallons is: a)100 b)110 c)120 d)140
Last Answer : c)120
Description : Three pipes P, Q and R can fill a tank from empty to full in 40 minutes, 15 minutes, and 30 minutes respectively. When the tank is empty, all the three pipes are opened. P, Q and R discharge chemical solutions X, Y and Z respectively. ... 5 minutes? a) 8 / 15 b) 7 / 15 c) 8 / 17 d) 6 / 13 e) 8 / 13
Last Answer : a Part of the tank filled by pipe P in 1 minute = 1 / 40 Part of the tank filled by pipe Q in 1 minute = 1 / 15 Part of the tank filled by pipe R in 1 minute = 1/ 30 Here we have to find the proportion of ... together in 5 minute = 5 1/8 = 5/ 8 Required proportion = (1/3) / ( 5/8) = 8 / 15
Description : Three pipes, A, B, & C are attached to a tank. A & B can fill it in 20 & 30 minutes respectively while C can empty it in 15 minutes. If A, B & C are kept open successively for 1 minute each, how soon will the tank be filled?
Last Answer : Answer: 167 minutes.
Description : Two taps M and N can alone fill a tank in 80 minutes and 120 minutes respectively. But due to a leakage of tank, it took 12 more minutes to fill the tank. In how many hours, the leak can alone empty the full tank? A) 240 B) 230 C) 248 D) 256
Last Answer : A A and B can fill tank in (1/80 + 1/120) = 1/48 so 48minutes But it took 12 more minutes, this means the tank got full in 48+12= 60 minutes So (1/80 + 1/120 – 1/x) = 1/60 1/X=1/80+1/120-1/60 Solve, x = 240
Description : Three pumps, M, N and O are opened to fill a tank such that M and N can fill the tank alone in 18 min. and 23 min. respectively and O can empty it in 15 min. After 3 minutes the emptying pipe is closed. In how many minutes the tank will be full in this way? A) 20 B) 25 C) 18 D) 12
Last Answer : D Let the tank full in x minutes, then M and N opened for x minutes and O for 3 minutes. (1/18 + 1/23)*x – (1/15)*3 = 1 (23+18/414)X=1+1/5 Solve, x = 12
Description : A pipe can fill a tank in 4 hours and another pipe can empty the same tank in 6 hours. When both the pipes are opened simultaneously, the part of tank
Last Answer : A pipe can fill a tank in 4 hours and another pipe can empty the same tank in 6 hours. When both the ... the part of tank filled in 1 hour is ..
Description : A tank can be filled by a tap in 6 hours and emptied by an outlet pipe in 8 hours. How long will it take to fill the cistern if both the taps are opened together? 1. 24 hours 2. 22 hours 3. 21 hours 4. 18 hours 5. 20 hours
Last Answer : 1;
Description : Four pipes can fill a reservoir in 15, 20, 30 and 60 hours respectively. The first one was opened at 6 AM, second at 7 AM, thir da t 8 AM and the fourth at 9 AM. When will the reservoir be filled ? (A) 11 AM (B) 12 Noon (C) 1 PM (D) 1:30 PM
Last Answer : Answer: C
Description : A tank has two faucet which fill it in 15 mins and 18 mins respectively. There is also a waste faucet in the tank. When all the 3 are opened the empty tank is full in 25 mins. How long the waste faucet take to empty the full tank? A) 450/17 mins B) 450/28 mins C) 450/37 mins D) 450/22 mins
Last Answer : C Work done by the waste faucet in 1 minute =>1/25 – (1/15 + 1/18) =>1/25 – (6+5/90) = 1/25 – 11/90 => - 37/450 Here negative sign means emptying Therefore waste faucet will empty the full tank in 450/37 mins.
Description : A tank is 1/4th full. Two pipes which fill the tank in 30minutes and 40 minutes respectively are opened simultaneously. After 10 minutes, a third pipe which empties the full tank in 60 minutes is also opened. In how many minutes the tank will be full? A) 14 B) 12 C) 15 D) 17
Last Answer : A Since 1/4th is already filled, 3/4th is to filled now. (1/30 + 1/40)*(10+x) – (1/60)*x = ¾ 7/120(10+x)-x/60=3/4 7x-2x/120=3/4-7/12 5x/120=1/6 30x=120 X=4 So total 10+4=14minutes
Description : Three pipes A, B and C can fill a tank in 6 hours. After working at it together for 2 hours, C is closed and A and B can fill the remaining part in 7 hours. The number of hours taken by C alone to fill the tank is: a) 10 b) 14 c) 12 d) 13 e) 15
Last Answer : (A+B+C) - (A+B) (A+B+C) =1/6 and (A+B+C) in 2hrs=2/6 and remaining part 1-2/6=2/3. So (A+B) in 7 hrs is 2/ (3*7) =2/21. 1/6-2/21=1/14 so answer is 14. Answer: b)
Description : Pipes P, Q and R which fill the tank together in 12 hours are opened for 2hours after which pipe R was closed. Find the number of hours taken by pipe R to fill the tank if the remaining tank is filled in 14 hours. A) 16 B) 14 C) 20 D) 42
Last Answer : D 1/P + 1/Q + 1/R = 1/12 Now given that first all open for 2hours, then R closed and P+Q completes in 14 hours, so (1/P + 1/Q + 1/R) *2 + (1/P + 1/Q)*14 = 1 Put 1/P + 1/Q = 1/12 – 1/R (1/12 – 1/R + 1/R) *2 + (1/12 – 1/R)*14 = 1 1/6+ 14/12 – 14/R = 1 Solve, R = 42
Description : A tank can be filled by an inlet tap at the rate of 8 litres per minute. A leak in the bottom of a tank can empty the full tank in 16 hours. When the tank is full, the inlet is opened and due to ... hours. How many litres does the tank hold? A) 8000 litre B) 9560 litre C) 8525 litre D) 9600 litre
Last Answer : D Part emptied by the leak in 1 hour = 1/16 part filled by (leak & inlet open) in 1 hour = 1/80 Part filled by the inlet tap in 1 hour = 1/16 – 1/80 = 1/20 Inlet tap fills the tank in = 20 hours Inlet tap fills water at the rate of 8 litres a minute. Capacity of tank = 20 * 60 * 8= 9600 litre
Description : Faucet A and B can fill a tank in 15 and 9 hrs respectively. Faucet C can empty it in 45 h. The tank is half full. All the three faucets are in operation simultaneously. After how much time the tank will be full ? A) 1(7/15)hrs B) 2(1/11)hrs C) 3(3/14)hrs D) 3(3/11)hrs
Last Answer : C In 1 hr = 1/15+1/9 – 1/45 =>3+5-1/45 = 7/45 ½ tank filled by 3 Faucets = 45/7*1/2 => 45/14 =>3(3/14)
Description : Two pumps P & Q can fill a tank in 12 mins and 15 mins respectively while a third pipe R can empty the full tank in 6 mins. P & Q kept open for 5 mins in the beginning and then R is also opened. In what time is tank emptied? A) 30mins B) 35mins C) 40mins D) 45 mins
Last Answer : D Part filled in 5 min = 5(1/12 +1/15) = 5*9/60 = ¾ Part emptied in 1 min when all the pumps are opened, = 1/6 – (1/12 + 1/15) = 1/6 – 3/20 = 1/60 Now 1/60 is part emptied in 1 min Therefore ¾ part will be emptied in 60 * ¾ = 45 mins
Description : A pipe can fill the tank in 12 hours.Because of a leak in the tank it took 16(1/2) hours to fill the tank.If the tank is full,how much time will the leak take to empty it? A) 18hrs51mins B) 18hrs 20min C) 18hrs 40min D) 18hrs 45min E) None of these
Last Answer : A =>1/12-2/33 = 11-4/132. ==>7/132 =>132/7 hrs =>132/7 hrs=>1131 mins =>18hrs 51min
Description : A large cistern can be filled by 2 pipes P & Q in 120 mins and 80 mins respectively. How many mins will it take to fill the cistern from empty state if Q is used for half the time and P & Q fil it together for the other half? A) 2hrs B) 1hr C) 3hrs D) 4hrs
Last Answer : B Part filled by (P+Q) in 1 min = 1/120 + 1/80 =2+3/240 = 5/240 = 1/48 Suppose the cistern is filled in x mins then, x/2 (1/48 + 1/80) = 1 x/2(5+3/240)=1 8x/480 = 1 x=480/8 x= 60 mins or 1 hr
Description : In centrifugal pump installation, (A) Pump is properly primed before starting (B) The diameter of the pipe at inlet as well as at outlet, is kept smaller than the delivery pipe (C) The ... out if it is started with empty delivery pipe and with open gate valve (D) All the above
Last Answer : (D) All the above
Description : Two pipes, Xand Y can fill a tank in 36 and 30 minutes respectively. Both are opened together, but at the end of 3minutes, X is turned off. In how many more minutes will Y fill the cistern? A) 7(24/5) B) 7(1/2) C) 24(1/3) D) 8(1/4)
Last Answer : C X can fill cistern in 36 minutes. X fills cistern in 1 minute = 1/36 Y can fill cistern in 30 minutes. Y fills cistern in 1 minute = 1/30 part. Xand Y together can fill cistern in 1 minute, = {(1/ ... part. 147/180 part cistern must be filled by Y in, [(147/180)/(1/30)] = 24(1/3) minutes.
Description : Which one of the following statements regarding septic tanks is wrong? A. A gap of 7.5 cm between the bottom of the covering slab and the top level of scum is provided B. The outlet invert level is kept ... . The minimum width of septic level is 90 cm D. The depth of tank is kept equal to its width
Last Answer : ANS: D
Description : Two faucet A and B can fill a tank in 20 hours and 40 hours respectively. If they are opened simultaneously. Sometimes later, tap B was closed, then it takes total 14 hours to fill up the whole tank. After how many hours B was closed? A) 4 hours B) 15.2 hours C) 12 hours D) 17.6 hours
Last Answer : A Let x is the time when B is closed X(1/20+1/40)+14/20=1 X=4 hours
Description : A cistern is filled in 15 hours by three pipes P, Q and R. The pipe R is thrice as fast as Q and Q is thrice as fast as P. How much time will pipe P alone take to fill the tank? A) 120 hrs B) 195 hrs C) 135 hrs D) Cannot be determined
Last Answer : B Suppose pipe P alone takes x hours to fill the tank. Then, pipes Q and R will take x/3 and x/9hours respectively to fill the tank. 1/x + 3/x + 9/x = 1/15 13/x = 1/15 => x = 195 hrs.
Description : Two taps P and Q can separately fill a tank in 120mins and 150 mins respectively. There is a 3rd tap in the bottom of the tank to empty it. If all of the 3 taps are simultaneously opened, then the tank is full ... . In how much time the 3rd pipe alone can empty the tank? A) 100 B) 200 C) 300 D) 400
Last Answer : B Work done by the 3 tap in 1 min = 1/100 – ( 1/120 + 1/150) = 1/100 – (5+4/600) =1/100 – 9/600 =6-9/600 = - 3/600 = - 1/200(negative signs mean empting) Therefore the 3rd tap alone can empty the tank in 200 mins
Description : Two faucet P and Q can fill a tank in 10 min. and 20 min. respectively. A water faucet R can empty the tank in 10 min. First P and Q are opened. After 3 min, R is also opened. In how much time, the tank is full? A) 17m B) 15m C) 11m D) 19m
Last Answer : C Part filled in 3 min. = 3*((1/10)+(1/20)) = 3 * (2+1/20) =>3(3/20) = 9/20 Remaining part=(1-(9/20))=(11/20). Net part filled in 1min. when P,Q and R are opened=(1/10)+(1/ ... (1/20). Now,(1/20) part is filled in one minute. (11/20) part is filled in = (20*(11/20))=11minutes.
Description : 3 faucet A,B,C can fill a cistern from empty to full in 45mins, 35mins, and 25 mins respectively. When the cistern is empty all the 3 faucets are opened. A,B,c discharge chemical solutions A,B,C respectively. What is ... the liquid in the tank after 5 mins? A) 63/143 B) 72/151 c) 67/173 D) 81/167
Last Answer : A Part filled by (A+B+C) in 5 mins = 5(1/45 +1/35 + 1/25) = 5 (35+45+63/1575) = 143/315 Part filled by c in 5 mins = 5/25 = 1/5 Required ratio = 1/5 * 315/143 =63/143.
Description : Which one of the following is true to estimate the range of cooling tower? a) Range = cooling water inlet temperature - wet bulb temperature b) Range = cooling water outlet temperature - wet bulb temperature ... = heat load in kcal per hour / water circulation in lines per hour d) None of the above
Last Answer : Range = heat load in kcal per hour / water circulation in lines per hour
Description : Pipe A usually fills a tank in 2 hours. On account of a leak at the bottom of the tank, it takes pipe A 30 more minutes to fill the tank. How long will the leak take to empty a full tank if pipe A is shut? a) 4 hours b) 3 hours c) 6 hours d) 8 hours e) 10 hours
Last Answer : portion of the tank filled by the pipe A in 1 hour = ½ of the tank let the portion of the tank emptied because of the leak in 1 hour be 1/x of the tank therefore, in 1 hour , portion of the tank filled = 1/2 - 1 ... 1/2 - 1/x = 1/2.5 or x = 10 hence, it takes 10 hours to empty a full tank Answer: e)
Description : two pipes X and Y can fill a cistern in 18 hrs and 24 hrs respectively. If both the pumps are opened simultaneously. How much time will be taken to fill the cistern? A) 10hrs 50mints B) 10 hrs 5mints C) 10hrs 17mints D) 10hrs 44mints
Last Answer : C Part filled by x in 1hour = 1/18 Part filled by y in 1 hour = 1/24 Part filled by (x+y) in 1 hour = 1/18 + 1/24 =>4+3/72 =>7/72 The cistern will be full in 72/7 hrs = 10 hrs 17mins.
Description : A dumper is normally filled in 18 hours but takes 6 hours longer to fill because of a leak in the bottom of the dumper. If the dumper is full the leak will empty it in how many hours? A) 76 hours B) 78 hours C) 72 hours D) 74 hours
Last Answer : C Work done by leak in 1 hr=(1/18-1/24) =>4-3/72 =>1/72 Leak will empty the dumper in 72 hours
Description : Faucet 'P' can fill the tank completely in12 hrs while faucet'q' can empty it by 24 hrs. By mistake, Anitha forgot to close the faucet q', As a result, both the faucet remained open. After 8 hrs, faucet realized the ... '. In how much time now onwards, would the tank be full? A) 4 B) 8 C) 12 D) 16
Last Answer : Answer: B Explanation: Faucet P can fill the tank completely in 12 hours => In 1 hour, Faucet P can fill 1/12of the tank Faucet q can empty the tank completely in 24 hours => In 1 hour, Faucet q can empty ... tank. Time taken to fill the remaining (1−1/3)=2/3of the tank =(2/3)/(1/12) = 8 hours
Description : Taps P, Q and R can fill a tank in 3, 4 and 5 hours respectively. If all the taps are opened together and after 30 minutes taps Q and R are turned off, find the total time in which the tank is full. A) 2(3/8)hrs B) 1(1/7)hrs C) 2(13/40)hrs D) 3(13/43)hrs
Last Answer : C In 1 hr P, Q, R = 1/3+1/4+1/5 = 20+15+12/60 = 47/60 Filled in 30m = 47/120 Remaining = 1-47/120 =73/120 Tap P = 3*73/120= 219/120 Total = 219/120+1/2 =219+60 /120= 279/120= 2 13/40 hrs
Description : Two pipes X and Y can fill a bunker in 24 hours. If only pipe X is open then it would take 12 hours longer to fill the bunker. Find how much longer would it take if only pipe Y is open. A) 46hrs B) 32hrs C) 48hrs D) 34hrs
Last Answer : C X= 24+12 = 36 X+Y= 1/24 Y= 1/24 – 1/36 = 3-2/72 = 1/72 Y= 72 X alone= 72-24 = 48 HRS
Description : Two filling tap can fill a dumper in 14 and 28 min. respectively and when the waste tap is open, they can together fill it in 35 min. The waste pipe can empty the full dumper in – A) 152/9 hrs. B) 137/7 hrs. C) 60/9 hrs. D) 140/11 hrs.
Last Answer : D 1/14 + 1/28 – 1/35 =>10 + 5 – 4/140 =>11/140 =>140/11 => hence answer is 140/11 hours.
Description : A tube can fill a tank completely in 18 hours. After half the tank is filled , one more similar tube is opened. What is the total time taken to fill the tank completely ? A) 14hrs 20min B) 13hrs 30min C) 13hrs 10min D) 14hrs 30min
Last Answer : C A tube can fill the half tank in 9hrs Now another similar tube opened 1/18+1/18 = 2/18 = 1/9 Remaining half tank filled in 4.5hrs Total time = 9+4.5 =13.5 = 13hrs 30min
Description : Three tubes A, B and C can fill a tank in 12hours. After working at it together for 4 hours, C is closed and A and B can fill the remaining part in 12 hours. The number of hours taken by C alone to fill the tank is A) 32hrs B) 30hrs C) 38hrs D) 36hrs
Last Answer : D A+B+C in 1h = 1/12 A+B+C in 4h = 4/12 = 1/3 Remaining = 1-1/3 = 2/3 A+B in 12hrs = 2/3 A+B in 1hr = 2/36=1/18 C alone to fill the tank= 1/12– 1/18 = 3-2/36= 1/36=36hrs
Description : can you empty a fish tank and fill it back up without the sealant leaking
Last Answer : Is the sealant leaking now? Why would removing water and adding new water cause the sealant to leak?
Description : Pipe A can fill an empty tank in 20 minutes and Pipe B in 30 mins and Pipe C can empty the same in 40 mins. If all of them work together, find the time taken to fill the tank? (a) 17 1/7 mins (b) 20 mins (c) 8 mins (d) none of these
Last Answer : (a) 17 1/7 mins
Description : Two pipes P and Q can fill a cistern in 15 minutes and 20 minutes respectively. Both are opened together, but at the end of 5 minutes, the pipe P is t
Last Answer : Two pipes P and Q can fill a cistern in 15 minutes and 20 minutes respectively. Both are opened ... will the pipe Q take to fill the cistern ?
Description : Why is an electrical outlet called an outlet when you plug things into it? Shouldn't it be called an inlet?
Last Answer : Current flow out from the wall socket when you plug a cord into it. If you want this to be called an inlet and not an outlet, then it would need to be reversed. When you plugged the cord ... flow is by a conductor such as your plug that trips the circuit and allows the electricity to flow freely.
Description : A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid
Last Answer : (D) Temperature of the solid
Description : In a 1-1 concurrent heat exchanger, if the tube side fluid outlet temperature is equal to the shell side fluid outlet temperature, then the LMTD is (A) ∞ (B) 0 ... temperature (D) Equal to the difference between hot fluid inlet temperature and cold fluid outlet temperature
Last Answer : (B) 0
Description : State the function of the following parts in a heat engine: a) Crank shaft b) spark plug c) carburettord) kick starter e) inlet valve f) outlet valve
Last Answer : a) Crankshaft converts the linear movement of piston into circular motion. b) Spark plug is used in petrol engine to ignite the mixture of petrol and air in the cylinder. c) Carburettorhelps to mix ... -air or air into the cylinder. f) Outlet Valve allows the exhaust gases out of the cylinder.
Description : 6. In a forward feed multiple effect, the pressure build up will be (A) Least at the inlet of the first effect (B) Least at the outlet of the last effect (C) Highest at the inlet of the last effect (D) Highest at the outlet of the last effect
Last Answer : (B) Least at the outlet of the last effect