One litre of a gas at STP weight 1.16 g it can possible be

1 Answer

Answer :

One litre of a gas at STP weight 1.16 g it can possible be A. `C_(2)H_(2)` B. CO C. `O_(2)` D. `NH_(3)`

Related questions

Description : 1.12 litre dry chlorine gas at STP was passed over a heated metal when 5.56 g of chloride of the metal was formed. What is the equivalent weight of th

Last Answer : 1.12 litre dry chlorine gas at STP was passed over a heated metal when 5.56 g of chloride of ... formed. What is the equivalent weight of the metal ?

Description : 5 L of gas at STP weight 6.25 g . What is the gram molecular weight ?

Last Answer : 5 L of gas at STP weight 6.25 g . What is the gram molecular weight ? A. 1.25 B. 14 C. 28 D. 56

Description : How many litres of `Cl_(2)` at STP will be liberated by the oxidation of `NaCl` with `10 g KMnO_(4)` in acidic medium: (Atomic weight: `Mn=55 and K=39

Last Answer : How many litres of `Cl_(2)` at STP will be liberated by the oxidation of `NaCl` with `10 g KMnO_(4)` in ... 3.54 B. 7.08 C. 1.77 D. None of these

Description : The volume of nitrogen gas Um (measured at STP) required to cover a sample of silica get with a mono-molecular layer is `129 cm^(3) g^(-1)` of gel. Ca

Last Answer : The volume of nitrogen gas Um (measured at STP) required to cover a sample of silica get with a mono-molecular layer ... `16.2 xx 10^(-20) m^(2).`

Description : At STP , for complete combustion of 3 g `C_(2)H_(6)` the required volume of `O_(2)` will be -

Last Answer : At STP , for complete combustion of 3 g `C_(2)H_(6)` the required volume of `O_(2)` will be - A. 78. 4 L B. 7. 84 L C. 2. 78 L D. 6. 23 L

Description : The volume of `CO_(2)` at STP obtained by heating 1 g of `CaCO_(3)` will be

Last Answer : The volume of `CO_(2)` at STP obtained by heating 1 g of `CaCO_(3)` will be A. 1 L B. `22.4 L` C. `0.224 L` D. `11.2 L`

Description : When 22.4 litres of `H_(2)(g)` is mixed with 11.2 litres of `CI_(2)(g)`, eacg at STP, the moles of HCI(g) formed is equal to :-

Last Answer : When 22.4 litres of `H_(2)(g)` is mixed with 11.2 litres of `CI_(2)(g)`, eacg at STP, the moles of HCI(g ... ) C. 1 mol of HCI (g) D. 2 mol of HCI (g)

Description : How do I convert ppb ozone with a molecular weight of 48 to ug/m3 assuming STP?

Last Answer : You lost me at ppb. Sorry

Description : What is the volume of any gas in STP ?

Last Answer : The molar volume of any gas in STP is 22.4 liters.

Description : What is the volume of gas in STP ?

Last Answer : The volume of gas in STT is 22.4 liters.

Description : A certain weioght of pure `CaCO_(3)` is made to react completely with 200mL of a HCl solution to given 227mL of `CO_(2)` gas at STP. The notmality of

Last Answer : A certain weioght of pure `CaCO_(3)` is made to react completely with 200mL of a HCl solution to ... at STP. The notmality of the HCl` solution is :

Description : 0.037g of an alcohol, R-OH was added to `CH_(3)MgBr` and the gas evolved measured 11.2 mL at STP. The Molecular mass of R-OH will be .

Last Answer : 0.037g of an alcohol, R-OH was added to `CH_(3)MgBr` and the gas evolved measured 11.2 mL at STP. The Molecular ... will be . A. 47 B. 79 C. 74 D. 77

Description : What is characteristic of 1 mole of gas at STP According to avogadro law?

Last Answer : It occupies 22.4 L

Description : How many moles of argon (Ar) are present in 5.6 liters of argon gas a STP?

Last Answer : The number of argon moles is 0,25.

Description : Grams of butane (C4H10 ) formed by the liquefaction of 448 litres of the gas (measured at (STP) would be (A) 580 (B) 640 (C) 1160 (D) Data insufficient; can't be computed

Last Answer : (C) 1160

Description : At zero degrees Celsius and one atmosphere (STP), the volume of a gas is 1,000 milliliters. If the temperature is increased to 25 degrees Celsius and the pressure is doubled, what is the new volume of the gas? w) 546 milliliters x) 500 milliliters y) 1,000 milliliters z) 273 milliliters

Last Answer : ANSWER: W -- 546 MILLILITERS

Description : How many molecules are present in 2.5 liters of gas at STP? w) 5.6 x 1024 molecules x) 1.5 x 1024 molecules y) 6.0 x 1023 molecules z) 6.7 x 1022 molecules

Last Answer : ANSWER: Z -- 6.7 X 1022 MOLECULES

Description : The optimum dissolved oxygen level (in mg/litre) required for survival of aquatic organisms is - (1) 4 - 6 (2) 2 - 4 (3) 8 - 10 (4) 12 - 16

Last Answer : (1) 4 - 6 Explanation: Oxygen is one of several dissolved gases important to aquatic systems. Dissolved oxygen is necessary to maintain aerobic conditions in surface waters and is ... approach saturation - that concentration which is in equilibrium with the partial pressure of atmospheric oxygen.

Description : One degree of hardness of water means a content of salts of  (A) 10.25 mg/litre  (B) 12.25 mg/litre  (C) 14.25 mg/litre  (D) 16.25 mg/litre

Last Answer : (C) 14.25 mg/litre 

Description : If the effective working time is 7 hours and per batch time of concrete is 3 minutes, the output of a concrete mixer of 150 litre capacity, is (A) 15,900 litres (B) 16,900 litres (C) 17,900 litres (D) 18,900 litres

Last Answer : (D) 18,900 litres

Description : What will be the volume of CO2 at NTP obtained on heating 10 grams of (90% pure) limestone [Pb. CET 2001] (A) 22.4 litre (B) 2.016 litre (C) 2.24 litre (D) 20.16 litre

Last Answer : (B) 2.016 litre

Description : The optimum dissolved oxygen level (in mg/litre) required for survival of aquatic organisms is : (1) 4 – 6 (2) 2 – 4 (3) 8 – 10 (4) 12 – 16

Last Answer :  4 – 6

Description : A tank can be filled by an inlet tap at the rate of 8 litres per minute. A leak in the bottom of a tank can empty the full tank in 16 hours. When the tank is full, the inlet is opened and due to ... hours. How many litres does the tank hold? A) 8000 litre B) 9560 litre C) 8525 litre D) 9600 litre

Last Answer : D Part emptied by the leak in 1 hour = 1/16 part filled by (leak & inlet open) in 1 hour = 1/80 Part filled by the inlet tap in 1 hour = 1/16 – 1/80 = 1/20 Inlet tap fills the tank in = 20 hours Inlet tap fills water at the rate of 8 litres a minute. Capacity of tank = 20 * 60 * 8= 9600 litre

Description : In the dissociation of `I_(2)(g)` at 1000 K in a container of 1 litre :- `I_(2)(g)rArr2I^(-)(g),K_(c)=10^(10)` Select the correct relation :-

Last Answer : In the dissociation of `I_(2)(g)` at 1000 K in a container of 1 litre :- `I_(2)(g)rArr2I^(-)(g),K_(c)=10^(10)` ... I^(-)]` D. `[I_(2)]=(1)/(2)[I^(-)]`

Description : 48 g of `SO_(3)` , 12.8 g of `SO_(2)` and 9.6 g of `O_(2)` are present in one litre . The respective active masses will be

Last Answer : 48 g of `SO_(3)` , 12.8 g of `SO_(2)` and 9.6 g of `O_(2)` are present in one litre . The respective active ... .6 , 0.4 and 0.2 D. 1.0 , 0.5 and 1.5

Description : One litre of a solution contains 18.9 g of `HNO_(3)` and one litre of another solution contains 3.2 g of NaOH. In what volume ratio must these solutio

Last Answer : One litre of a solution contains 18.9 g of `HNO_(3)` and one litre of another solution contains 3.2 g of NaOH. In ... B. `8:3` C. `15:4` D. `4:15`

Description : What will the concentration of `[Ca^(+2)]` in a sample of 1 litre hard water if after treatment with washing soda 10 g insoluable `CaCO_(3)` is precip

Last Answer : What will the concentration of `[Ca^(+2)]` in a sample of 1 litre hard water if after treatment with washing soda 10 g ... B. 0.1 M C. 0.3 M D. 0.4 M

Description : 1 g of complex `[Cr(H_(2)O)_(5)Cl]Cl_(2).H_(2)O` was passed through a cation exchanger to produce HCl. The acid liberated was diluted to 1 litre. What

Last Answer : 1 g of complex `[Cr(H_(2)O)_(5)Cl]Cl_(2).H_(2)O` was passed through a cation ... molarity of acid solution [Molecular weight of complex=266.5]?

Description : 40000 litre of oil of density 0.9 g cc is pumped from an oil tanker ship into a storage tank at 10 m higher level than the ship in half an hour.

Last Answer : 40000 litre of oil of density 0.9 g cc is pumped from an oil tanker ship into a storage tank at 10 ... an hour. What should be the power of the pump?

Description : Maximum permissible concentration (i.e. TLV) of DDT in public water supply system is __________ micro gram (μ g)/litre. (A) 22 (B) 42 (C) 332 (D) 1050

Last Answer : (B) 42

Description : According to IS : 2720 - 1965, the composition of a dispersing solution used in pipette analysis for determining the size of particles, is (A) sodium-hexametaphosphate 33 g, sodium carbonate 7 g ... -hexametaphosphate 23 g, sodium carbonate 17 g and distilled water one litre (D) None of these

Last Answer : Answer: Option A

Description : The bulk density of aggregates, is generally expressed as (A) tonnes/cubic metre (B) kg/cubic metre (C) kg/litre (D) g/cm3

Last Answer : (C) kg/litre

Description : A molar solution is one that contains one mole of a solute in [IIT 1986] (A) 1000 g of the solvent (B) One litre of the solvent (C) One litre of the solution (D) 22.4 litres of the solution

Last Answer : (C) One litre of the solution

Description : What is the weight of one litre of methane under standard conditions?

Last Answer : Molecular formula for methane is CH4.. Then, molecular mass of methane = 12 + 4 x 1 = 16 u. 1 mole of methane = 16 g = 22.4 L at STP. Therefore, weight of one litre of methane = 16/22.4 g = 0.714 g.

Description : Pick out the wrong statement. (A) Aromatics have higher specific gravity than paraffins (B) Gross calorific value (GCV) of petrofuels is equal to (12400 - 2100 ρ 2 ) where, ρ is the specific gravity ... volume basis (i.e., Kcal/litre) (D) Higher specific gravity of petrofuels means higher C/H ratio

Last Answer : (C) Heavier petrofuels have higher GCV on weight basis (i.e., Kcal/kg) but lower GCV on volume basis (i.e., Kcal/litre)

Description : Which file format cannot be converted into STL file format? a..prt b..sld c..dwg d..stp

Last Answer : c..dwg

Description : What is the full form of 'STP' ? -How To ?

Last Answer : The full form of 'STP' is Software Technology Park

Description : At `25^(@)` C for complete combustion of 5 mol propane `(C_(3)H_(8))` . The required volume of `O_(2)` at STP will be .

Last Answer : At `25^(@)` C for complete combustion of 5 mol propane `(C_(3)H_(8))` . The required volume of `O_(2)` at ... . A. 560 L B. 560 mL C. 360 L D. 360 mL

Description : The volume occupied by 4.4 gram of `CO_(2)` at STP is :-

Last Answer : The volume occupied by 4.4 gram of `CO_(2)` at STP is :- A. 22.4 L B. 2.24 L C. 0.224 L D. 0.1 L

Description : What volume of dry silicon tetrafluoride (at STP) can be produced by the complete reaction of 89g og CaSiO?

Last Answer : Need answer

Description : What does the stp s3614XL oil filter fit Which cars?

Last Answer : 2009 Chevy Silverado

Description : Will a STP S5 oil filter fit a 250 Chevy?

Last Answer : Feel Free to Answer

Description : What auto does a stp ai filter sa8755 fit?

Last Answer : Feel Free to Answer

Description : What does stp s2808 oil filter fit?

Last Answer : Does stp2808 fit 98 civic1.6D1y68

Description : What does a stp s8a fit?

Last Answer : Need answer

Description : What does stp s2808 oil filter fit?

Last Answer : Does stp2808 fit 98 civic1.6D1y68

Description : Thiopental (sodium thiopental, Thiopentone, STP) characterized by the following except A. Prepares as a pale yellow 10.5 (alkaline) B. After iv bolus, rapidly ... C) Effects include decrease cerebral blood flow and O2 requirements D) Has good analgesic ...

Last Answer : Ans: D

Description : Calculate the volume occupied by 10 mole of CO2 at STP.

Last Answer : Ans. 1 mol of CO2 at STP = 22.7 L 10 mole of CO2 at STP = 22.7 x 10 =227 L

Description : What is the central device in star topology? a. STP serve b. Hub/switch c. PDC d. Router

Last Answer : b. Hub/switch

Description : Which of the following is not a internet protocol: a) STP b) HTTP c) FTP d) None of These

Last Answer : a) STP